Customer Creation for a Sales Employee

Hi
I want to raise a sales order for some samples on a Employee in our HR syayetm
Please tell me do i have to Create a Customer for a Sales Employee who has been hired in HR .
regards
Pravin

Hi Saurabh
That is bad then what is this integration between HR and SD that SAP talks about useful for ?
Like a user will hire a person in HR and then someone will have to enter most of the same data again in SD.
I had read somewhere that you can create a sales order on a employee without creating a customer that is by using something they call partner functions.
could you ask some of your friends/colleagues and let me know?
regards
Pravin

Similar Messages

  • Customer Recievables Ageing by Sales Employee showing No Sales Employee

    Dear Sir(s),
    We are on SAP Business One 8.81 PL04.
    The customer recievables Ageing by Sales Employee report shows "No Sales Employee". when we group by sales employee on the selection criteria.
    We have setup all our Customers with sales employees in the Business Partner Master Data.
    Please advise on what could be the cause of this.
    Kind Regards,
    Asif M.

    Hi Rahul,
    Yes, the sales employee details are captured on the invoice.
    Infact, on the "No sales employee" Group, only the Incoming Payments (Type : RC) show for the diferent customers and yet these incoming payments were paid based on the invoices which have the sales employees captured.
    The customers appear both on the "No Sales Employee" Group as negative balances as well as its correct "Sales Employee' group as positve balance. The report shows correctly when we select the group by as  "customer" in the selection criteria.
    Regards,
    Asif

  • Problem in customer creation for sales area

    Hi all,
    I could not create a customer for given Sales Org , DC and Division...
    SAP Throwing error as "above mentioned sales area is not defined for the customer...
    Karthick

    Karthick V ,
    When you create a Customer either in XD01 or VD01 Care should be taken while entering the "sales area" and the "customer" (Domestic customer or Export Customer or one time customer) again within this there is no. ranges which will be classified either Internal or External.
    So care should be taken when you create a customer.
    1. Check In IMG --> Enterprise structure -->Assignement --> SD --> Set up sales Area, whether you have created sales area (Check other assignements too. within Sales and Distribution). Generally check your Assignment sequence with reference to SD Process.
    2. Check in OBD2 What Account groups have been used (you maintain different account groups this where you classify customer)
    3. Check Assign no ranges to customer Account Groups
    4. Check whether you have maintained common Distribution Channels and Common Divisions.
    Regards
    Sathya
    Edited by: Sathya Pavan Yedavalli venkata on Apr 30, 2009 7:26 AM

  • ATP Check against customer stock for return Sale order

    Hi Friends,
    Pl.help in this.
    1. Is it possible to configure ATP check against Customer stock in a Sale order/Return order/any other way? ( Actuallly, client wants to take back empty cylinders through return sale order by ATP check against the customer stock)
    Regards,
    Mani

    Hi Mani ,
    Are you  taking cylinder as returable packing item or not?
    ex- For soft  drinks or beverages industry  it pretty common , they  use thel returnable package material type and more over why you want  use return sales order for this?
    Note- Just plz explain  scenario to MM and PP People also as availability check with all combination
    Hope it is helpful to you,
    Regards
    Venkat

  • Quota creation for a sales order

    Hello All,
    Can any body pls help me in creating quota for a sales order(tcode VA01)
    I want to define some quota for quantity for a selected customers.
    Pls tel me the steps to do tht.
    Thnks,
    Sunita

    Hi,
    Cau you elaborate ur question...
    I think ur trying to have a validation on quantity for particular customer.
    if this is the case you can use the User exits for the same.
    Let me know if this is the case else explain id=ndetail.
    Thanks,
    Yuvaraj

  • Internal customer creation for interplant stock transfer

    hi all,
    i just want to know which is the account group I can use for the internal customer.
    and in that customer grp do I need to feel the dummy customer details like usual cust details ?  or what elase?
    will the only one customer be ok for two different receiving plants?
    In MM> Purchasing> Purchase Ord --> Define shipping data for plant
    we have different plant entries there if we go for details of plant we can see the customer number and the sales area here i cant understand that what customer we have to assign, that internal customer ? which Sales Area, same of a internal customer ???
    can we maintain the different combinations like supplier plant becoming the delivering plant and vice a versa.
    Please guide me on above query.
    regards,
    Sanjay

    Hi,
    1. There is nothing about the Customer Account Group for Internal Customer... You may use the Standard Sold to Party account group for the same... But the best practice will be a different account group with different number range... this will be helpful to understand that this is internal customer when doing transactions... here you can also leave the non required fields....
    if you use the Same Sold to party... its better to maintain different Customer Group for the internal customers...
    2.  what customer we have to assign, that internal customer ?  Yes That Internal Customer only... that means that whenever you create a delivery for this customer... the delivery will reach this Plant....
    This internal customer number is assigned to the plants which will a receving plant in STO...
    But the Sales Area here requires for Shipping Plant and not for recieving plant... This Sales Area is assigned to create delivery and Billing during the STO for this plant whenever the same is used a shipping plant... so this will not be same internal customer's sales area... but one of the sales area responsible for this plant....
    Hope this helps to you...
    Thanks,
    Muthu

  • Prompt for Customizing request when saving Sales Employee (VPE1)

    Hi,
    When we try to create Sales Personnel through SD Menu path (VPE1), on saving the system prompts for customizing  request. Since this transaction is a master data and we dont transport this data to our production system. Suggest me a way to avoid this transport request while creating Sales Personnel.
    We are currently using version 3.1i and upgrading to ECC6.0. In 3.1i we use transaction PAL1 to create Sales Personnel However it will not prompt for Customizing request
    Also checked the SAP Note Note 854390 - FAQ: Use of the sales representative in SD without HR
    Help me on how to turn off this customizing request. Basis and Security team could not able to turn this off.
    Regards,
    Pradeep Maddi

    hello, friend.
    you have 2 choices:
    1.  create a transport request, save the data but do not release it for transport.
    2.  when the dialog asks you for transport request, just close this.  the system will give you a message about links.  just ignore it.
    hope this helped.  reward if so.
    regards.

  • Custom Production for Export sales

    Dear Experts
    I Have a scenario of custom production as follows.
    1. Receive Order from the Export Customer.
    2. Customer will send the input materials as free of charge.
    3. Company will process the material and sell the Output material to the customer.
    4. From receipt of input material, processing and output material stage, inventory should be shown under Customer stocks.
    Please suggest How to map this scenario in SAP.
    Regards
    KMK

    Never tried but you can make an attempt as follows
    1)  Create the customer components with material type HALB
    2)  In OMS2, for the combination of plant and material type, have the box ticked ONLY  for "Qty updation"
    3)  Create a separate storage location for storing such customer components
    4)  Go to OMJJ, click on "Movement Types", key in movement type 101 and execute.  Copy this and rename it as 901.  Take the help of MM consultant and remove the FI settings since for 101 while inwarding, it will have accounting impact
    5)  Create a PO on customer
    6)  Do MIGO with the new movement type
    7)  Make production / quality entries
    8)  Now you can follow normal sales process like creation of sale order, delivery, billing & excise invoice
    Let me know if this has helped you to some extent.
    thanks
    G. Lakshmipathi

  • Error message during duplicate Pur Requisition creation for same Sale Order

    Dear Experts,
    I need your help to sort out a issue related to Stock Transport Order.
    Our scenario is as below:
    1) Sales order is raised first.
    2) Stock transport requisition raised off in the background of a sales order automatically.
    3) This PR turned into an Stock Transport Order PO manually.
    4) Create delivery for STO from supplying plant and then GR is done in receiving plant. Create inter-company invoice.
    5)Create delivery for sales order to issue the stock to end-customer and raise invoice.
    This is standard scenario.
    Problem comes when some smart uses manually creates another stock transport requisition again for same SO, which is turned into an STO. Means there is a duplication of STO PO.
    My question to you experts, is there any standard way to prompt error or warning message, when users try to create purchase requisition manually for the same SO.
    Account assignment category in PR is M - Ind. cust. w/o KD-CO.
    Please suggest.
    Regards,
    Praveen

    Hi!
    Is it possible to create / configure a seperate PR document type for PRs created automatically from SO and don't give authorization to any user to create / amend the same manually?
    Regards,
    Riju

  • Error while inbound creation for return sales order

    Hi all,
             We are in the process of creating return sales order for invoice cancelation.
             We have created return sales order.
             we have made settings for automatic inbound creation.
             While creating inbound delivery system giving following error,
    <b>Material cannot be used for inbound delivery because QM is active.</b>
    Please help in solving error.
    regards,
    Mona

    dear  kiran,
                        Tcode is for job planning,where can i make the required setting.
                        Can you explain in detail?
    regards,
    Mona

  • GTS Stop delivery creation for blocked sales orders

    We implemented Note 579357 to stop the creation of deliveries when sales orders are blocked and everything works correctly except for rush orders (order type SO).
    After the note was applied, deliveries are not automatically created for rush orders even though the orders have gone thru screening in GTS and have been released.  Any solution to this problem???

    Dear GTS experts,
    I'm facing exactly the same problem with rush orders that Sammy Chan describes in his original post.
    I checked all replies but I have still no idea to solve this issue. The problem is that when creating the delivery during a rush order creation at the time the system reaches the copy condition with the implemented coding there is no order number available to check against in GTS.
    As the whole thread is marked as answered I hope someone can help me.
    Best regards,
    Ulrich

  • Automatic production order creation for remaining sales order quantity

    Hi All,
    My requirement is to create automatic production order for a particular material when the available quantity ( Stock in MD04) is less than the sales order / Delivery quantity.Automatic production order should only be created for deficit quantity.
    For example if i have stock of material A 100. I have recieved a sales order for 120 pieces. Now automatic production order should be created for 20 pieces only.
    Any inputs/ suggestions, please let me know.
    Thanks in advance !!
    regards
    Pawan.

    Hi Pawan
    In Material Master MM01 / MM02, you need to maintain 20 in MRP3 --> Planning --> Strategy Group.
    If you maintain this, items can be produced only against sale order you are creating.
    Dont forget to reward if this helps you.
    Regards
    G. Lakshmipathi

  • Report with customer info for an Sales Order with batch details

    Hi
    Can any one please tell me the SAP REPORT with contains data of customers were shipped a specific product (material number) by batch number.  report with the name and address of the customer, the sales order number and the number of products that were shipped.
    Thanks
    Nick

    Hi nick,
    See if anybody has worked on SIS (sales information system) in your team.
    He can help you out to create one info structure , by selecting desired characteristics, key figure with respective update rules. though its require lot of configuration but you can make it without abap development.
    (I couldn"t make it in time to provide you detailed configuration but below given path will take you to the configuration area )
    IMG - LG -Logistick information system -logistick data werhouse- data basis- field catalogue.
    IMG - LG -Logistick information system -logistick data werhouse- data basis -
    infostructure.
    IMG - LG -Logistick information system -logistick data werhouse- data basis - updating - update defination & update rules.
    ( MC18, MC21, MC24,& MC30)this transaction help to create field catelogue, info system, update rule & generation log respectively.
    karnesh

  • How to Invoke custom Idoc for a sales order

    How to create/invoke a custom Idoc when a service order(IW31) IS-U is created or modified ?

    Hi Senthil,
    You can use the output determination technique for this,
    so when ever it got created this out put will be trigered and configure your partner profile also in the similar way.
    Regards,
    sasi

  • Use of Sales Employee in HR and SD

    Hi
    We have this scenario in our company.
    1.A Employee is hired using the HR module and h gets a personnel number.2.we maintain infotype 0900 "Sales Data" for this employee here we
    select his Sales Org , Sales Office , Sales Group.
    3.We want to send some samples to this employee on his communication
    address maintained in HR by creating a sales order in the SD module.
    4.i tried various search in this site and other forums to find out how
    a employee can be used as a customer but was not able to find much.
    5.Request your help to tell me how to use a employee hired thru HR in
    the SD module for order creation etc.Please send/direct me to documents if
    available.
    regards
    Pravin

    Hi Everyone
    Thanks for your replies but i am still confused as to why i have to create a customer again for this sales employee whom i hired in HR . I mean cant i create a sales order directly against this sales employee ?.
    You see if i have to create a customer again then i have to put in all the details again. I am trying to eliminate the need of typing in the communication address etc from HR again. We found people make mistakes during data entry and then there is inconsistency between data in HR and data in SD.
    Like I want to be able to create a sales order on a sales employeei hired in HR and any changes done in HR should flow seamlessly to SD for these guys as after all both these moduls SD and HR are said to b integrated ?
    Waiting for your inputs
    Regards
    Pravin

Maybe you are looking for