Customizing for FI-SL error.

Hi all.
We have a customizing for FI-SL on TCODE GCIN (Table Group). One of table has been modified on TCODE SE11, so, when we enter on TCODE GCIN an try to modify our Table Group, SAP sent us the follow error: Message GG579: You can´t edit the table ZTERNIUM (error detail: You want to change, display or delete table group ZTERNIUM. You cannot do so because either the table group was not created using this tool or subsequent manual changes were made to the table group in the ABAP/4 Dictionary.) The question is: How can we do to solve this problem? Exist a solution?
Best Regards.

Hi Moises,
Please note that this is caused by the fact that the table has been edited with SE11 which is not allowed, you can see this in the inactive versions. This change is not allowed because it causes inconsistencies between other FI-SL tables and the index.
The 'normal' procedure to modify or add a new field in FI-SL table is :
1) edit the table group and install the change with trx.GCIN
2) add sender/receiver field in variable field movement (trx.GCF2) used for necessary activities
3) if historical data need to be updated, then data has to be deleted and reposted.
To 'recover' this situation, you must take the following actions below. First, check transaction GCIN -> check displays error messages.
The error message shown there must be repaired.
Afterwards, the system should allow ZTERNIUM to be edited from trx.GCIN.
The table should also be installed. In case of error, you should make a database adjustment with SE14.
Afterwards RGZZGLUX should be executed while no posting/update is processed.
This is to regenerate FI-SL related include programs.
I hope this helps.
Best Regards,
Vanessa.

Similar Messages

Getting error:Absence type 100 was not found in Customizing for

Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.

Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks.

Help!!! - When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards

System error: Incorrect Customizing for field

Hello guru's,
I am using badi (mb_migo_badi) on migo transaction for adding a custom tab.
In mseg table custom include (CI_COBL) I had added two fields which is zct3no and zct3dt
when the time of transaction :
the field which i had taken , migo document is generating properly and the values of customized tab fields inserting in mseg table properly .
The badi which i had done is working properly for document creation, but at the time of display this document the error is coming :
system error: incorrect customizing for field : ct3no and ct3dt
Thanks & regards,
Sandeep.
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Oct 23, 2011 1:01 PM

Hi Sandip,
I think there is a similar post you posted in the same forum.
Regards,
Madhu.

Help - Business Partner "Error in conversion Customizing for address types"

Hi Experts,
I am encountering an error with maintaining the Payer/ee in the Payment Details (SI) tab under Counterparty company code.
The error message I get is below --
*Error in conversion Customizing for address types (-> note 594871, III)
Message no. FTBU800*
I need your kind help please to troubleshoot this issue.. I receive the same error when i book deals and try to view the "Payment Details" tab during TX01 or TM01. I am not sure anymore what could be causing this problem.
Thanks,
David

Hello Raj,
Impliment the correction as specified in the sap Note 594873.. sect III.
You can take the help of your basis team for downloading it Using Tcode "SNOTE" and if you have sufficient authorizations you can do it your self..
another option is to down load the Note from the service market place and get the correction implimented manually by a technical consultant.
Wish you success.
M. Naveen Kumar

Error Customizing for feedback functionality missing

Hi
We have Configured Service Desk in our Solution Manager and we are able to Send messages in Solution Manager Box.
When we are trying to send from External Box i am getting an Warning "Customizing for feedback functionality missing"
RFC between Solman to ERP system Configured and Working
Could any one please tell me i need to do any other config
Question number 2.
we have 11000 users when we configure Service Desk do we need to create 11000 USerd id in Solman?
Points will be rewarded

Hi,
When creating a support message from a satellite. Solution Manager first creates an ABA Notification.
Check your ABA Notification SLF1settings in tcode DNO_CUST01 (number range, action profile).
Regards,
Remy Piets

Shipping Charge for free goods Error FF805 Tax statement item missing o0

Hi,
We handle a lot of free goods and Subsequent deliveries which are free of charge.
The item category has been set "relevant for billing" and "100% discount (B)" for relevant for pricing.
We have absolutely no trouble in billing and creating the accounting document for the free goods.
However, sometimes the client would like to charge shipping/handling/freight cost to customers on this. In this case (the net value is 0 and freight will have some amount), billing document is generated as expected but accounting document doesn't.
We get the error "Tax statement item missing for tax code O0" FF805"
We think this happens because the net value being $0.00.
In pricing procedure all the shipping and tax condition types have requirement '2' (and I tried with blanks also)
How to correct this issue? The client wants to bill the customer for freight even if net value is $0.00.
Helpful answers will be rewarded.
Thank You,
Manoj

Hi Manoj
Firstly , Check wheather the tax code O0 is assigned to MWST condition type in VK12 .
Secondly check wheather that tax code you assigned is an input / output tax .
Finally check what tax procedure has been assigned . and check wheather that tax code is available in that tax procedure or not
Regards
Srinath

Goods receipt not possible for delivery 80172554: error code 8

Hi all,
I got this error but the description does not helps to understand the issue.
Goods receipt not possible for delivery 80172554: error code 8
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
CD

Please check this answered link:
Re: MIGO
Re: Inter comapny PO-
Goods receipt not possible for delivery 800015869: error code 1
STO Problem while doing GR against outbound delivery
Edited by: Afshad Irani on Jun 2, 2010 7:13 PM

Goods receipt not possible for delivery 800015869: error code 1

Dear friends,
I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
Goods receipt not possible for delivery 800015869: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
Any poniters to check the setting in PO or delivery or any setting in SPRO.
Regards
Ashutosh

Hi Anupam,
That is the requirement of my scenario
That is happening in intercompany posting.
I am explaining to you.
say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
I have two company codes X and Y
One DC (A) belongs to X and second store (B) belongs to Y.
I have stock available for say article ( am working here in IS Retail instead of material ) in both DC --A and Store --B.
Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
Now I did delivery thru VL10B and then picking and then PGI.
Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
So now total stock in DC=400
Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
and stock of receivibg store (B) will increase by 100 nos.
But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
But there is another stock in transit available=50
Now why GR is not happening against delivery but it is happening against PO???
Any pointers

SAP mail not received for transfer order errors in background

Hi All,
We need to set up automated mails to SAP inbox in case there is any error during automatic TO creation in the background. The customizing for this has been done. Now in OMKX for MAIL messages we have two options, either tick the document user or put a user id in the recepient field. If I put a user id in the recepient field the user gets the job spool in the inbox everytime the job is run. However when the 'document user' box is checked it does not send the notification to the inbox of the user who had created the material document when there is some error in the TO creation background job. The mail control indicator 'A' has been set up in OMKX under both MAIL messages and movement types. Am I missing some setting? Note that auto TO creation is successfully happening in background so all its relevant settings are in place.

I have just scanned down 9 pages in the discussion and found a discussion thread already running for my problem with google mail....... http://discussions.apple.com/thread.jspa?threadID=874063&tstart=120

Customer for function SP may not have account group in sap

Dear All,
Not open the sales order and error show in SAP
Customer for function SP may not have account group.

In IMG > SD > Basic Function > Set up Partner Determination
Check the assignment of Partner Function with the Account Group in Account Groups - Function Assignment.
Best Regards,
Ankur

Baulsc help - Can a custom validator display a error in the UI dataTable

Hi balusc,
Pls refer to my post in the topic
"Can a custom validator display a error in the UI dataTable + jsf"
Give me a solution pls.
Thanks,
Ambika☺

avoid another thread for same ?
http://forum.java.sun.com/thread.jspa?threadID=5229577

No position management procedure could by found in Customizing for 57

Hello
I get in FTR_CREATE the error
No position management procedure could by found in Customizing for position CoCd:BPO1 ValArea001 ValCls0003 Trans.:\INTERN\0057.
But a product category or product type 57 does not exist?
I am creating a 62C interest rate swap.
Even if I assign 62C

Hi,
You need to assign a posn mgmt procedure in IMG for ValArea001 and ValCls0003.
you can do this in FSCM > TRM > Txn Manager > Gen. Settings > Acctg > Settings for Position Management > ASSIGN POSITION MANAGEMENT PROCEDURE.
Regards

Call of API for IBase contains errors

Dear All,
We are using solution manager 4 with SP13.When i try to create a Ibase through Initiate Data transfer for ibase,i gives the following error.
Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Please help to proceed,
Regards,
Avinash.

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

Customizing for FI-SL error.

Similar Messages

Maybe you are looking for