CX_SY_MOVE_CAST_ERROR in SPROXY Class after creating fault messages in PI ?

Hi All,
We created a SOAP to Proxy synchronous scenario and everthing works fine.
Now we have created a fault message in PI and regenerated the proxy in ECC, after regenerating the proxy, if i debug the proxy from service registry, breakpoint gets triggered in proxy class and iam getting an exception "CX_SY_MOVE_CAST_ERROR" at the status bar (but not dump). After executing the proxy class i could get the required response in service registry but with the exception ( Connection IO Exception. Check nested exception for details. (Invalid SOAP Response. Runtime can not find return parameter <(http://hostname.com/soaptoproxy)MT_Soap_Response>.). In MONI i could see this as a successful message. Can anyone tell me reason for this exception both in proxy class and in Service registry ? I also regenerated the proxy class after creating fault message in PI.
Thanks,
Sivakumar.C

Hi,
Thanks. I have tested in locally in SPROXY and i found that exception occurs in the constructor method of exception class, which was created by adding Fault Messages in PI. Any Suggestions ?
Thanks,
Sivakumar.C
Edited by: kumar.sappi on Feb 6, 2012 12:19 PM
Edited by: kumar.sappi on Feb 6, 2012 1:49 PM

Similar Messages

PI 7.0 SOAP message reply HTTP 500 and after the fault message

Hello Everybody,
I have the scenario RFC -> XI -> SOAP in synchronous mode.
I use for the mapping XSLT because I have to put some dynamic data comming from the RFC in the header of envelope.
At level of adapter receiver SOAP , I flag the "do not use envelop"
In normal, that works .
When the is an fonctionnal error in SOAP service, it sends me back an error HTTP 500 and afterwards the fault message in a soap envelop format. In that case, how can I pass over this error to treat the envelop because in adapter, it is stopped and it returns a short dump to the RFC.
Is there somebody who can help me with this problem ?
Thanks in adavance for your answers .
Regards.
Eric.

Hi,
In case of a SOAP error while processing the request, the SOAP HTTP server MUST issue an HTTP 500 "Internal Server Error" response and include a SOAP message in the response containing a SOAP Fault element
Thanks,
RamuV

How to create Fault Message Type when developing RFC (se37)

Hi,
I am working on importing a RFC into XI but am seeing only the Request and Response message structures. The Fault Message structure is blank. I need this to trap .Exception errors like when the connection to partner is broken etc. which look like system errors but they appear in XI as Application errors and the RFC_Name.Exception message is sent back to XI.
Question is: what needs to be done in the RFC so that when I import into XI, I get the Fault Message structure as well.
Thanks in advance
ram

Hello Ram,
You can look into this post as to how to handle [RFC exceptions|RFC Destination Catch Exceptions;.
Hope this is of some help.
BR,
Suhas

Fault Message SOAP

Hello.
My design is next.
IN SAP XI/PI
Interface Object
1.- Create Fault Message Types. (MT_FAULT)
2.- Message Interfaces / add Fault Message Types (MT_FAULT) (Add Proxy and SOAP interfaces)
Mapping Object
3.- Message Mapping / Add Mapping (MT_FAULT mapping MT_FAULT) -> (MM_FAULT = mapping generate)
4.- Interfaces Mapping / Method Request,Response and Fault.
In Method Fault add (MM_FAULT).
IN SPROXY SAP ECC
5.- Execute transacction Sproxy and regenerate namespaces of interface.
6.- Debug interface and NOT MESSAGE ERROR.
But entry transaction SXI_MONITOR, in SAP ECC the XML is next.
(SOAP HEADER - ERROR)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>soap fault: Server was unable to read request. ---> There is an error in XML document (1, 526). ---> Instance validation error: 'CL' is not a valid value for SolicitudOrdenPagoMonedaOperacion.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
bold The error "AdditionalText" want add in table Z.

Hello.
It happens that I have created all this and do not know how to obtain the values of error.
The only mistake I have used SXI_MONITOR.
But I need to take the error message and send to a table Z. The idea is that in the Proxy My SAP ECC returns an exception with the error.
So far not done.

Emulate Fault message in BPM

Hello
I have read all related topics
fault message in BPM process
Alert monitoring and fault message types
Using Fault Message Type in BPM
but no answer..
I have synch BPM that send synch request to RFC and a mapping step. Then I have to catch exception (of send step or mapping) and send fault message in exception handler.
I haven't a proxy. I want to create fault message manually and send it. Is it possible? I cannot create an interface of fault message type.

Hi Sergey,
As far as I know, it's possible to catch the mapping/send exception.
It's also easy to define an exception branch for this exception, and inside the exception branch, send a "normal" message in a send step.
However, as far as I know there's no way of specifying a BPM send step that sends a fault message.
At least in my experience, regular messages are just as useful when sending error information.
Cheers,
Ofer

Fault message handling in abap client proxy

Hi experts,
i have scenario like this SAPECC---XI---WEBservice
i was decided to using the ABAP CLIENT proxy in sender side and soap adapter communication in receiver side
i will be get the wsdl file form client
problem is i am in bit of confusion like am i need to create fault message for this asychronous scenario?
how can i create the fault message for this scenario(that WSDL) and how the abaperwill handle those error
thanks in advance

Hi.
You can use fault message but it won´t return a error to your ABAP Proxy because your interface is ASSYNC. The fault message generated will stop in Adapter Engine.
If you need a return of the error, you have to change your interface to Sync mode.
To get more information, follow the link below:
Fault Message Type
http://help.sap.com/saphelp_nwpi711/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
Best Regards.
Bruno

BPM in CACHE won't activate. Fault message is not defined

Hello All,
After adding fault messages to our RFC scenarios, our BPM will no longer activate from transaction SXI_CACHE. The ReturnCode is 99. When we attempt to do a manual activation, we get an error which reads:
<b>Send step: Fault message '722783b5171311d9881bd5c4c0a8a777' is not defined</b>.
Have any of you seen this before?
We have mappings for the fault messages in interface mappings. Is there something else needed in the BPM itself?
Thanks,
Jimmy

From OSS:
The synchronous send steps define a fault message as exception. In this
case you have to wrap a block around every one or all send steps.
The block catches the exception, in your case the fault message.
The problem is, if no handler is defined, the import of the process fails (SXI_CACHE).
So modify the process, wrap a block with exception
handling around the send step and activate once more.

About Fault messages?

Hi experts,
i have a senario where i have to create fault message,What is the use off fault message........To create the fault message sholud i create complete source structrue in data type of fault messsage.....can any one please send doc's and information on Fault message.
thanks & regards,
Phnani

Hi Phani,
Fault message is a error meesage. Its like an exception in simple terms. The fault message is used to store a log for application error. Fault messages is defined in IR.
To give a overview on Fault messages it is mostly used in synchronous communication. When an error occurs at the inbound side instead of sending the response message back it sends a fault message back to the sender system to handle error.
Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get the exception or error mapped which has occured while execution of Application at the sender/receiver end....
One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the default)..
Fault messages are used to propogate / send back the error message to the calling application. This is used when there is a failure and the sending system needs to know what the error was. This is more of catching Application Errors.
Also please go through the link below to get the details for fault messages...
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
check this nice blog also
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
Asynchronus RFC exception handling
XI Alerts are not getting triggered from proxy servers
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
Fault Message
Cheers...
Vasu
<b>** REward POints if found useful **</b>

Need to displaye message "User created successfully" after creating user

Hi,
I need to display message "User created successfully" after creating a user in OIM i.e after clicking on create user button, thie message should be displayed. Please guide me in this regard.
Thanks.

Hi,
In ideal situation when you create an user and user gets created successfully the user profile page displayed.
Now, if you want to show your message on top of that then you need to customize the Create User jsp.
If you want to show new screen with required message then you need to create an custom screen,action class and some modification in struts framework.
Regards
Alabhya Goel

Getting error message after creating project ess~org from ESS track

Hi All,
Our basis team just now implemented the track for ESS and MSS.So we need to sync all application from DTR.
We are facing problem with one Dc essOrg.I have created project essOrg from ESS track in inactive DC of development configuration.Build of DC is successful,where as in the Task tab its showing below error message:
" Tree TreeCont [dataSource]: Context element and property are not compatible Orgchart.wdview NWI_HR1_Dessorg~sap.com/src/packages/com/sap/xss/hr/org/chart "
I have done the follwing steps :
1.I have close the project.Then remove it from client.Then close the NWDs and reopen it.Still the same error we are getting after creatig project from the track.
2.Even we tried to repair the DC.Its asking for check out.Then after creating activity its showing an error pop up message "org.eclipse.jdt.core.JavaModelException: Classpath contains duplicate entry: D:Documents and settings/susmita.panigrahi/.dtc/2/DCs/sap.com/pcui_gp/xssfpm/_comp/gen/default/public/FloorplanManager/lib/java/sap.compcui_gpxssfpm~FloorplanManager.jar "
3.I have open the OrgChart view of VcOrgChart Component in NWDs.I have found that the data source property of Tree node is showing red cross mark with name OrgTab(name of context node).I have tried to select another node also other than the context node OrgTab , getting message "Select an attribute of Type"
Can any body tell me how to solve the error"Context element and property are not compatible " coming for DC ess~Org?
Thanks
Susmita

If you have created other projects and they are working fine? Standard application should work without any modifications, so you may like to revert all the changes(before they cause further problem).
Well you may like to clean up your directory , unless you have loads of application checked out.. Remove all applications from this particular Track, ensure that everytime you delete project from Studio , select to remove code from directory.
This is likely that you are working on applications from two tracks, where version of FPM component is not the same. I always prefer to work one at a time, and i remove other track if i am done with application(This is lame way of handling it, but i prefer this.. saves loads of time to clean/repair)
Also hope you are using compatible version of Studio.
Rgds

How can i test after creating Message mapping transformations

Hi guys,
How can i test my transformation after creation of message mapping in Integration Repository.
Pleae expain step by step procedure
Thanks & Regards.,
Pushparaju.B

Hi,
1. If you just want to test the mapping --In message Mapping there are three tab, the second one being hte Test tAb. So u can pu the values in the left side XML and do test.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/e3072e65f04445a010847aa970b68b/content.htm
2. You can do the Testing from Interface mapping also. There is a Test tab there too.
3. If you have created the whole scnerio then you can do testing from Integration directory:
http://help.sap.com/saphelp_nw04/helpdata/en/6b/874a4273bb3830e10000000a155106/content.htm
Regards
Vijaya

After installing Mountain Lion my MS Word created this message: PowerPC applications are no longer supported. Are all my documents lost?

After installing Mountain Lion my MS Word created this message: PowerPC applications are no longer supported. Are all my documents lost?

pastis51 wrote:
will it convert my documents from iCloud?
What do you mean by this exactly?

EA6900 After Creating the Smart WiFi Account, I get a "No Associated Networks" message

Well, I got my new EA6900 router and set it up following the Quick Start Guide, using my laptop directly connected to the router via an Ethernet cable.
After creating my new Smart WiFi Account and getting the router running, I took my laptop back to my desk, and connected via WiFi, using my new SSID and Wireless password. Then I checked the speed, and replied to the email to Verify my new Smart WiFi account.
Then I used the linksyssmartwifi.com URL to log back on to the router using my new Smart WiFi Userid and Password.
However - I got the message "No associated networks. The Linksys Smart WiFi account specified does not have associated networks". Huh - what does that mean?
Fortunately I could still logon by just using the Router Password, but why didn't this new Smart WiFi account work? And where do I setup the "Associated Networks"?
If you are getting this same "No Associated Networks" error message, then here is the answer:
*** You MUST remain cabled to the router via Ethernet for your INITIAL logon to your new Smart WiFi account. ***
This will cause the all-important "Associate Router" panel to appear, where you enter the Router Password to "associate" its network with your Smart WiFi Account. Was that little tidbit mentioned in the Quick Start Guide? Nooooooooo!!
Of course, then you can go searching for answers like I did, and perhaps even find the knowledge base article "Creating a Linksys Smart Wi-Fi Account". And if you work your way down thru it, all the way to Step 4, you'll see the "Associate Router" panel that didn't appear when you tried to do your first logon using a wireless connection. An easy mistake to make.
And if you look very carefully at the fine print of Step 4, you'll see at the end of the so-called "Quick Tips" this little tip:
"Associating your account remotely is not possible."
Well Thanks, Cisco! By hiding that little tidbit so well - it was like an Easter Egg hunt, trying to figure out what "No Associated Networks" really meant. Please fix the Quick Start Guide to include a Step 6 with this very necessary "Association" step in it.

Hi Geekychix,
No, I successfully associated - once I recabled my laptop to the router, and then signed on via the browser.
I suspect that many of you have a computer PERMANENTLY cabled to the router, so of course you can't understand this fundamental problem of the 'Associate Router' panel not appearing at logon, when you try to logon via a WiFi connection.
Maybe I should explain that the location of the router in a large house is crucial for good WiFI coverage.
Because of this, the router location may not be an ideal spot to keep a computer permanently cabled to the router.
In my case, it's quite inconvenient, which is why I made the effort to explain WHY I disconnected my cable, and logged on remotely via the WiFi connection, to complete the email validation, and make my initial logon to the account.
As I said before, it's an easy mistake to make - but there is No Clue that you need to remain cabled for the all-important 'Associate Router' step at first logon, which isn't even mentioned in the Quick Start Guide.

Error message after creating new responsibitiy on new Operating Unit

Hi All,
Steps to Reproduce:
1- Add new Legal entity
2- Adding new operating unit from (define organization) with the organization classifications :
a. HR Organization
b. Operating Unit
c. Company Cost Center
3- Run the request “Replicate Seed Data”
4- Adding the new Operating Unit in company all Operating units security profile
5- Adding the security profile for the new Operating unit
6- run the request "Security List Maintenance” for “, ALL_PROFILES, , , ALL, , ,”
7- Create new responsibility
8- In profile option at the responsibility level add the operating unit and the security profile for the new responsibility
9- Add the new responsibility to an existing user
10- the Error "AP_FINAP_NOT_DEFINED" appearing when try to open any form
thanks in advance,

From Oracle Support:
*R12: APXINWKB : Unable to Create New Invoices due to AP_FINAP_NOT_DEFINED for Security Group [ID 1092873.1]*
Run the HR concurrent program Security List Maintenance after creating a new Security Profile.
Be sure that the parameter "Generate List For" is set to "All security profiles".

AQ Adapter Not Returning Fault Message even if the Enqueue is disabled

Hi....
i am using Oracle SOA 10.1.3.5 and we are trying to catch the error/fault returned by the AQ Adapter...
to create the scenario i have disabled the Enqueue on the Adapter and put the message...but the we are not receiving the fault message (the control is not going to CatchAll Block defined for the scope...)
the message we are getting is witht eh fault tag and not a exception....
i also tried to add the pick activity after invoke...but can someone provide any link to configure the pick for fault callback...
<fault>
-<exception class="com.collaxa.cube.ws.WebServiceException">
EJB Transaction Error.
EJB exception happened while invoking the partner.
Please verify partner service.
-<stack>
<f>com.collaxa.cube.ws.WSIFInvocationHandler.invoke#647
</f>
<f>com.collaxa.cube.ws.WSInvocationManager.invoke2#538
</f>
<f>com.collaxa.cube.ws.WSInvocationManager.invoke#286
</f>
<f>com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke#832
</f>
<f>com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements#413
</f>
<f>com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform#200
</f>
<f>com.collaxa.cube.engine.CubeEngine.performActivity#4330
</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1837
</f>
<f>com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#77
</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#240
</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#345
</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#6464
</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1908
</f>
<f>com.collaxa.cube.engine.ejb.impl.CubeEngineBean.handleWorkItem#415
</f>
<f>sun.reflect.NativeMethodAccessorImpl.invoke0
</f>
<f>sun.reflect.NativeMethodAccessorImpl.invoke#39
</f>
<f>...
</f>
</stack>
</exception>
-<root class="org.collaxa.thirdparty.apache.wsif.WSIFException">
file:/u01/oracle/product/10.1.3.1/OracleAS/bpel/domains/default/tmp/.bpel_InterfaceCustomerToBillingEBF_1.0_9da16e94dedd6d829b47b8d4b4a5ab53.tmp/EnqueueCreatePortalAccountMessage.wsdl [ Produce_Message_ptt::Produce_Message(CreateCustomerPartyEBM) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: ERRJMS_PROVIDER_ERR.
Could not produce message due to JMS provider error.
; nested exception is:
ORABPEL-12165
ERRJMS_PROVIDER_ERR.
Could not produce message due to JMS provider error.
Please examine the log file to determine the problem.
-<stack>
<f>oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation#644
</f>
<f>oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation#739
</f>
<f>com.collaxa.cube.ws.WSIFInvocationHandler.invoke#474
</f>
<f>com.collaxa.cube.ws.WSInvocationManager.invoke2#538
</f>
<f>com.collaxa.cube.ws.WSInvocationManager.invoke#286
</f>
<f>com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke#832
</f>
<f>com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements#413
</f>
<f>com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform#200
</f>
<f>com.collaxa.cube.engine.CubeEngine.performActivity#4330
</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1837
</f>
<f>com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#77
</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#240
</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#345
</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#6464
</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1908
</f>
<f>com.collaxa.cube.engine.ejb.impl.CubeEngineBean.handleWorkItem#415
</f>
<f>...
</f>
</stack>
</root>
</fault
regards
\Sanju03

I have found problem. My application name in iStudio was different from adapter. Once they are same it is ok
Regards Robert

CX_SY_MOVE_CAST_ERROR in SPROXY Class after creating fault messages in PI ?

Similar Messages

Maybe you are looking for