Data Store Object Activation failure
Dear Friends,
I have a DSO which gets updated directly from flatfile. DTP seems fine, but activation of data in DSO is failing continuously. The error message is as below,
"Error when using the dynamic structures during SID determination"
I cross checked data in file and masterdata, everything seems correct. Even I deleted the request and repeated the load couple of times, but failed to get any positive result. Could anyone please tell me how to solve this?
Thanks and Regards
Neo
Hi Neo,
We have one setting in DSO level "SID" Generation check that check box is selected or not. if it's selected uncheck that and reload and try again.
And also check any special charcters in that file you find the error in ativation log only.
Hope it's help you.
Thanks and Regards,
Venkat.
Similar Messages
-
Error while Data Store Object activation
Dear Guru's
I'm new to BI 7.......
I'm trying to load data to Data Store Object from PSA through DTP and it was successful upto newdata table. But while activating the request to active table the total status of the request turned as red and in DETAILS all the messages were in green.
Kindly let me know what could be the problem.
Surely points will be awarded
thanks in advance.....
with regards,
ViswaDear KK,
Here I printed the log pls go theough it..
Job started
Step 001 started (program RSDELPART1, variant &0000000000000, user ID 160624)
Delete is running: Data target ZIC_EX1, from 57 to 57
FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSDELPART1; row 000875
Request '57'; DTA 'ZIC_EX1'; action 'D'; with dialog 'X'
Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
Overall status 'Red' (user 160624)
Incorrect data could be visible in Reporting (see long text)
Status transition 2 / 3 to 9 / 9 completed successfully
SQL: 15.05.2007 13:26:26 160624
ALTER TABLE "/BIC/B0000161000" TRUNCATE PARTITION
"/BIC/B00001610000000000002"
SQL-END: 15.05.2007 13:26:26 00:00:00
Request DTPR_6K1ZWLCJLY9ZF4NLHC91N1J10 deleted from PSA;REQICODS entry also deleted
Request DTPR_6K1ZWLCJLY9ZF4NLHC91N1J10 not found in IC ZIC_EX1;CODS also deleted
Request DTPR_6K1ZWLCJLY9ZF4NLHC91N1J10 deleted from PSA;EQICODS entry also deleted
Overall status 'Deleted' (user 160624)
Delete is finished: Data target ZIC_EX1, from 57 to 57
Job finished
with regards
Viswa -
Error while activating Data Store Object
Hi Guru's,
When I try to activate a data store object i get the error message :
The creation of the export DataSource failed
No authorization to logon as trusted sys tem (Trusted RC=2).
No authorization to logon as trusted sys tem (Trusted RC=2).
Error when creating the export DataSource and dependent Program ID 4SYPYCOPQ94IXEGA3739L803Z retrieved for DataStore object ZODS_PRAHi,
you are facing a issue with your source system 'myself', check and repair it. Also check if the communication user (normally ALEREMOTE) has all permissions needed.
kind regards
Siggi -
BW Analytical Authorisations and Data Store Objects
Hello All
I am in the proces of trying to figure out how BW Analytical authorisations work as I have to build some authrisations for a new a new BW project.
I understand the concept of BW Analytical authorisations. I have created an object linked to heirarchies via an info provider, and assigned it to a user and it works great. The problem is that I then went and ran a generation for heirarchies and I specified the Z info provider my analytical authorisation object was linked to. Now I find that all usrs on the system have access to my object and I need to remove this. Even new users on the system automatically get this access.
I have read note 1052242 which explains that I can remove the authorisations using data store objects (DSOs). The thing is that I do not know how to maintain these DSOs..
Can anyone help with this. Once I know how to maintain the DSO I can add in the required D_E_L_E_T_E entry and re-run the genration and hopefully this will solve my problem.
Thank You In Advance
Best RegardsHi Anwar,
if your question is how to update data into a DSO, then I recommend you read the documentation.
http://help.sap.com/saphelp_nw70/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
You require basic BW knowledge for that.
If your background is more ABAP then think about making the DSO a DSO for direct update.
That way you do not need BW knowledge and you can use ABAP instead to modify the data in the DSO.
These Function modules of the API can be used:
● RSDRI_ODSO_INSERT: Inserts new data (with keys not yet in the system).
● RSDRI_ODSO_MODIFY: inserts data having new keys; for data with keys already in the system, the data is changed.
● RSDRI_ODSO_UPDATE: changes data with keys in the system
● RSDRI_ODSO_DELETE_RFC: deletes data
More information about these Function Module is here
http://help.sap.com/saphelp_nw70/helpdata/en/c0/99663b3e916a78e10000000a11402f/frameset.htm
However, if that doesn't solve your original problem with the authorizations, here are some useful links that I found helpful when implementing BW Analysis Authorizations.
SDN area for Analysis Authorizations
http://wiki.sdn.sap.com/wiki/display/BI/AuthorizationinSAPNWBI#AuthorizationinSAPNWBI-Differencebetweenrssmandrsecadmin
Marc Bernard session
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/ac7d7c27-0a01-0010-d5a9-9cb9ddcb6bce
SAP release note for new Analysis Authorizations
http://help.sap.com/saphelp_nw04s/helpdata/en/80/d71042f664e22ce10000000a1550b0/frameset.htm
Best,
Ralf -
Hi ,
What is mean by the term " Data Store Objects "
What is the difference Between Data Store Objects and An info cube ?
Kumarhi,
the basic differenece between ODS and infocube is that ODS has overwrite facility while info cube have additive facility.
cube has 16 dimension while ods has three dimension.
for more information check ouyt this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
<b>under modelling</b> -
Error when Activating the data store object
Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AMHi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM -
Planning Area to Data Store Object (ODS)
Hi,
The data source is the Planning area and the target is the ODS object. The transfer rule mapping is 1 to 1 for all key figures, there is no routine used. After executing the info package and data transfer, I am checking the value in ODS update table.
One key figure for a CVC is always showing less value in ODS update table than the planning area value. I checked the extractor check in RSA3, it shows 10 records for a selection condition, but the ODS update table shows only 9 records for the same selection conditions. 1 particular record is not updated in ODS upate table.
Kindly advise to overcome this issue.
thanks and regards
MurugesanHi,
Did you compare the data in PSA? All 10 or less and how about Keys for your DSO? Try making all Key and load.
Why do you need DSO for Planning? Aren't you aggregating ?
@AK -
Delete a request from the Data Store Object,
Hi Experts,
We recently upgraded our BW3.5 to NW2004s and I tried to load data into my DataStore. I am trying to delete an invalid request and it does not allow me to delete it.
Can someone help me with this?
Thanks in advanceTry deleting this request from the PSA as well.
On DataSource -> rc -> Manage
Find the request number and delete it.
Also go and delete it from DataStore Object.
Next time when you run DTP you wont have this request.
Hope this helps. -
ODS Activation failure due to inconsistancies
Hi All,
I am getting an error "Inconsistancies found while checking the Data Store Object" while activating the ODS.
Actually,I have added new feild to ODS(containing data) and activated it successfully.
But while deleting the same feild and activating the ODS, I got this error,even though the data is deleted.
Request you to please help me on this issue.
Regards,
JyothsnaHi Jyothsna,
Is the object you added to ODS is a Mater data IO??
Also adding the object is not a problem. But when you delete, you might face this issue.
You will have to delete entire ODS contents before deleting the IO from it.
(Or)
If it is a characteristics IO, you can leave that field wthout doing any mapping.
Hope it helps!
Regards,
Pavan -
Hi All,
I am getting the below error in ODS activation step of a Process Chain. Repeat of the step goes to success.
Process <DP> did not confirm within the permitted time period
Message no. RSODSO_TOOLS025
Diagnosis
The timeout occurred after 600 seconds. This is a configurable parameter. Details for change options and their effects can be found in the appropriate part of the documentation.
We are on BI7 level 13.
Please share the thoughts if you have seen this error.
Thanks!Hi,
Improving ODS Activation
By making some adjustments to the Data Store object parameters, you should be able to activate the request. Please note and make the following adjustments in transaction RSODSO_SETTINGS (you can adjust this for each Data Store object):
1) Maximum package size (for activation).
This you should reduce to 10000. Then the package
processing would be less time consuming.
2) Maximum wait time for process (for activation)
This could be increased to e.g. 600
3) Button "change process parameters"
here the activation is set to be run in backround (which is also adviced by SAP).
If you want the processes to run in background, you may have to increase the amount of batchjobs available in your system. Otherwise the activation can not run in parallel if there are no batchjobs available. This could also occur because there are other programs using batchjobs also.
Also please check the server group used in RSODSO_SETTINGS You can make use of the RZ12 for the same. If you adjust these settings the activation should finish.
https://forums.sdn.sap.com/click.jspa?searchID=8414593&messageID=2920621
https://forums.sdn.sap.com/click.jspa?searchID=8414593&messageID=2935203
/thread/346369 [original link is broken]
ODS performance
Thanks,
JituK -
Generic LDAPv3 data store help
hey,
We are running Access Manager 7.1 patch 1 on Sun App Server 8.2/Solaris 10 sparc. We are receiving the following error in the console when we try to add a Generic LDAPv3 data store:
"The attribute name sun-idrepo-ldapv3-ldapv3Generic does not match the service schema"
the console error log says:
"2008-10-01 10:00:50" "/|testldap|The attribute name sun-idrepo-ldapv3-ldapv3Generic does not match the service schema" amConsole.error CONSOLE-644 dc=example,dc=com e4a92e04b361e73401 SEVERE id=amadmin,ou=user,dc=example,dc=com XX.XX.XX.XX "cn=dsameuser,ou=DSAME Users,dc=example,dc=com" amhostany ideas on the issue?SysHex wrote:
Hi there
Using AM7.1 RTM
Been having a bit of trouble configuring a Data Store for Active directory. I actually got it working, just not the way I want it to work.
I got an LDAP tree in this AD that looks somewhat like this :
dc=company
ou=section1,dc=company
ou=section2,dc=company
ou=users,ou=section1,dc=company
ou=users,ou=section2,dc=company
inside each ou=users I got several users such as :
cn=aaa1,ou=users,ou=section1,dc=company
cn=aaa2,ou=users,ou=section1,dc=company
cn=aaa3,ou=users,ou=section1,dc=company
and
cn=bbb1,ou=users,ou=section2,dc=company
cn=bbb2,ou=users,ou=section2,dc=company
cn=bbb3,ou=users,ou=section2,dc=company
What I'm looking for is to configure a DataStore that has all these users in it.
I have managed to create a data store that contains wither all users in section1 or all users in section2 , but no datastore with all users from section1 and section2.
When I use
LDAP Organization DN: ou=section2,dc=company
or
LDAP Organization DN: ou=section1,dc=company
and
LDAP People Container Naming Attribute : ou
LDAP People Container Value: users
I get the users from each of the sections.
So, till here everything is working the way it should.
Now Trying to configure the Datastore to contain the users of both I do
LDAP Organization DN: dc=company
and I set
LDAPv3 Plug-in Search Scope: SCOPE_SUB
if you do the ldapsearch for the same scope and basedn with bind DN , doe it return any result?
>
and it doesn't show any of the users.
Am I doing anything wrong?
Thanks for your helpwhat is your use case? if you are going to do mostly read/search/mod/del operation then you can create 2 datastore instances one pointing to section1 and the other pointing to section2
Rp -
All of the system data collection sets have been running for 6+ months without any issues, couple of weeks ago the 'Server Activity' collection set failed to restart after a planned maintenance server reboot.
When attempting to manually start the collection set it indicates "success", but after refreshing the collection set it showing as stopped. Viewing the logs for the Data Collection (Server Activity) I am getting the message:
Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
After some research into this really unhelpful message I came across one posting where this error has been found to occur in SP1. We are running SP2 which include the fix so this shouldn't be the problem (ref http://connect.microsoft.com/SQLServer/feedback/details/585210/sql-server-2008-data-collection-execmasterpackage-timeout).
To see more detail on the root cause of the error I enabled the additional tracing for data collection (http://blogs.msdn.com/b/sqlagent/archive/2011/07/13/enabling-additional-tracing-for-data-collector.aspx). This provided an exception stack which indicated
that the issue was thrown to what looks like an existing file, referring to a location (e:\) which doesn't exist in our system.
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: wmain _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Command line: dcexec -c -s 2 -i "S160OLTP\OLTP" -m 0 -e 0x09C1635DD4C4C6478A145D679AFE718F_1_STOP
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Init _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Console code page (m_codePage): 437
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::ParseCommandLine _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::ParseCommandLine _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Init _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Main _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Started continuous mode collection on thread 12036
DCEXEC!26d0!2f04!2012/11/28!11:17:25:: StartCachedCollectionWrapper _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Waiting for collection to exit or stop event to be signaled
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection(iSetId = 2, iCollectionMode = 0, pwszInstanceName = S160OLTP\OLTP)
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::ExecuteCollectionSet _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: SQL Instance Name: OLTP
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::TryExecuteCollectionSetOnce _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::Initialize _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::Initialize _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateCollectorPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CacheWindow=1, CacheDirectory='I:\MSSQL10.OLTP\MSSQL\dccache'
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateCollectorPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateSetPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CollectionSetUID='{49268954-4FD4-4EB6-AA04-CD59D9BB5714}', ExecutionMode=0, IsSystem=-1, LoggingLevel=0, DaysUntilExpiration=14, ExitEventName=''
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::PopulateSetPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CreateControlEvents _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Win32 Error: GetLastError=183, retCode=0x4, function CDataCollectorController::CreateControlEvents, line 470, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Failed to create kernel event for collection set: {49268954-4FD4-4EB6-AA04-CD59D9BB5714}. Inner Error ------------------>
Cannot create a file when that file already exists.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CreateControlEvents _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: DC_FAILED: function CDataCollectorController::TryExecuteCollectionSetOnce, line 350, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::TryExecuteCollectionSetOnce _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: Collection set execution failed, retrying in 5 seconds...
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: Waiting for exit event or retry timer failed.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Win32 Error: GetLastError=6, retCode=0x4, function CDataCollectorController::ExecuteCollectionSet, line 278, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e ERROR: Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: CDataCollectorController::ExecuteCollectionSet _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: StartCollection _OUT:00000000
DCEXEC!26d0!2f04!2012/11/28!11:17:25:: StartCachedCollectionWrapper _OUT:0x000004
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Collection thread returned (00000001)
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Waiting for collection thread to exit
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Collection thread signaled
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: Application::Main _OUT
DCEXEC!26d0!1b88!2012/11/28!11:17:25:: wmain _OUT:0x000004
I am now stumped as I haven't found anyone else experiencing this issue.
Any ideas, please help??Thanks for the pointer Eileen, problem solved.
Can't believe I missed it, but after reading the last section on system hangs it occurred to me that I hadn't checked that all dcexec.exe processes were killed when I disable the data collection service.
For anyone else experiencing this issue I identified the dcexec.exe processes using the following in cmd line:
TASKLIST /SVC /FI "IMAGENAME EQ DCEXEC.EXE"
On the default setup of the data collection there should be two dcexec.exe processes constantly running, one for "Server Activity" and another for "Query Statistics". On our server there were five running with the data collection disabled.
After killing all of the processes and restarting the data collection problem solved!!
Still need to understand why the processes didn't shut down cleanly when the server was restarted, but at least I know where to look now. -
Dear all
We're using a Windows Server 2012 R2 (DC of a Domain) and WDS (Windows Deployment Services) to deploy a Windows 8.1 edition with a MAK (Multiple activation key).
Deployment works by PXE booting and deploying the original install.wim (from the .iso) from the WDS Server.
If we try to activate the deployed Windows on the client PC we experience the following:
1. Activation in the GUI ends with error "Windows has detected a change to the system files that is preventing activation."
2. Command line, slmgr /dli ends with "Error: 0xc004d302 on a Computer running Microsoft Windows non-core edition, run slui.exe 0x2a 0xc004d302 to display the error text"
3. Command line slui.exe 0x2a 0xc004d302 ends with the error "The security processor has reported that the trusted data store was rearmed.
Hence we cannot activate Windows.
Our Windows copy and our licenses (MAK key) were purchased thru official channels.
We urgently need this to work.
Any help is much appreciated.
Dominique, Zurich, Switzerland.Hello,
Are we running slmgr /rearm? You may see this error if slmgr /rearm was run and the machine was not rebooted after that and then activation queries or attempts were made.
Also check the permissions on the \Crypto\RSA\MachineKeys
cacls %systemdrive%\ProgramData\Microsoft\Crypto\RSA\MachineKeys
post the results.
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights. -
Data Plan Activation Failure after I updating to 8.0.2
After I updated my Ipad2 to 8.0.2, I have not been able to use my cellular date. It keeps "searching" for connection and then pops up "Data Plan Activation Failure". What do I do?
I turned gmail off and turned on iCloud email. It won't load either.
-
I have the iPhone 4S and I cant get it through ATT without spending 649 bucks. I was wondering if I could purchase it at an Apple Store without activating it or do I have to activate right there before I can get it?
you can purchase it through apple but they will cahrge you the same things as att if your not ready for the upgrade
Maybe you are looking for
-
Hi everyone, I was playing games on my 3gs the other day and then it shut off randomly and the screen slowly faded away the battery was at about 70% now it will just turn off randomly without warning unless plug into a power source and wont turn on a
-
Today I added a new entry in my Address Book on Macbook and also edited an entry on my iPhone Contacts. I have tried syncing several times and neither is updating on the other device. Makes me wonder how many other entries are not synced. Any idea
-
Can I connect a (scsi) Syquest EZ Drive(zip discs)?
I have searched and read the threads available here but am still not sure about what I can do and can't do. I have a new Mac Pro and I have a Syquest EZ Drive (uses 100MG Zip Discs). Is there a way to connect this to the MacPro? It appears to be the
-
Unknown event - programs in daemon mode cant access resources.
Hi Guys. First of all Im not keen on os stuff, thus not sure what I should look for to solve my problem, Thats why Im posting before getting deeper into forums. Here is my problem. Im working on academic network - Solaris 7-10. Where parts of configu
-
Contact settings keep changing
Can anyone shed any light on this please? I have personalised several of my iphone 4 contacts with different ringtones and photos but every so often the phone randomly switches round the photos to different contacts and resets the ringtones back to t