Date range previous year?

How would I get all records that are in the previous year from the date the report is run?
Thanks
Chris

Hi Chris,
Are you doing a current vs previous report? There are two ways to do this. One is to have two parameters: one for a start date and one for an end date. When your users enter the date range, set your Record Selection formula to go back 1 year from the start date.
{TABLE.DateField} >= Date (Year ({?StartDate} - 1), Month ({?StartDate}), Day ({?StartDate})) And
{TABLE.DateField} <= {?StartDate};
The other suggestion would be to use a subreport to query the previous year's data.
Good luck,
Brian

Similar Messages

OBIEE 11g - Current year date and the same date in Previous year

Hi Experts,
I have an attribute say RECEIPT NO, i want to display the "No of Receipts" i.e(count(receipt no)) for any given date in the current year as well as for the same date in previous year.
Please suggest me how to achieve this in 11g.
Thanks

Hi Veeravalli,
Thanks for your prompt help.
Could you please ellobarate this. I have to display the count(receipt_no) for the last year same date.
Thanks

Survey questionaire disappearing when updating the start date and end date to previous year

Hi Experts
When the start and end dates are updated to the previous year dates the questionaire is disappearing from the assignment block, is this a standard behaviour or this is a bug which needs to be raised to SAP.
Please advise.
Appreciate for a quick response as this is quiet urgent.
Regards
AM

Hi AM,
Check the SAP Note 1629777 - SVY: Survey becomes invalid if the from date < sysdate
This should resolve the issue.
Regards,
Gervase

Function Module to get Last date of previous year

Is there any function module to get the Last date of the previous year. e.g, if i give date as 03/02/2009 the output should be 31/12/2008.

pls use below 2 FM's
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
          EXPORTING
            months = -1
            olddate = curent_date
          IMPORTING
            newdate = w_prevdate.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
          EXPORTING
            day_in            = w_prevdate
          IMPORTING
            last_day_of_month = w_lastdayprevmonth
          EXCEPTIONS
            day_in_no_date    = 1
            OTHERS            = 2.

Query - to calculate data for previous year

Hi forum,
I have a requirement to calculate
' Total number of complaints received current month last year / total number of complaints last year)*current year total complaints target.'
I have no of complaints as key figure.
Any ideas how to do it in query designer.
Thanks in advance.
Regards,

Hi,
The requirement is user will select the month he wants to see the records.
Based on input I have to calculate
1. Records from same month previous year.
2. Total records last year and
3. Total records this year.
I just need 1 input variable. Please explain in detail.
Should i create 2 RKF for records of previous year and for records of this year.
regards

Generate a report with date range and year as POV with Hyp Planning ?

Hi everybody,
I am starting with hyp planning and i need your help please.
I have to create some forms. In those forms, the final user is supposed to be able to display data in the forms between 2 dates and for a specific year.
My first problem : I don't know how you can display data in a form between 2 dates and for one specific year. I just have one dimension YEAR and one PERIOD, so if i selected them as a PAGE, the final user will just be able to choose the month and the year for his form ... and not displaying data between 2 dates.
My second problem is with the dimensions YEAR, SCENARIO and VERSION. I don't want to put the dimensions VERSION and SCENARIO as PAGE (it easier for the final user to just choose a year than to choose a year, scenario, and version) but as POV with a relationship with the dimension YEAR (because if the user chooses YEAR = actual_year (2012) the VERSION and the SCENARIO won't be the same than if the user chooses YEAR= last_year). IF YEAR = next_year, VERSION=Propuesta, SCENARIO=Forecast
IF YEAR = actual_year, VERSION=Propuesta, SCENARIO=Forecast AC
IF YEAR = last_year, VERSION=Actual, SCENARIA=Real
How can i do that?
Thank you for your help
Edited by: 932573 on May 7, 2012 3:44 PM
Edited by: 932573 on May 7, 2012 4:27 PM

I am not sure if you are using RAS or Enterprise SDK, but here are some code snippets to set range report parameters:
For scheduling:
// oReport is IReport object holding the crystal report.
oReportParameter = oReport.getReportParameters().get(i);
currentRangeValue = oReportParameter.getCurrentValues().addRangeValue();
currentRangeValue.getFromValue().setValue(dateParameter);
currentRangeValue.getToValue().setValue(dateParameter);
For viewing:
ParameterFieldRangeValue pfrv = new ParameterFieldRangeValue();
pfrv.setBeginValue(dateTimeValue);
pfrv.setEndValue(dateTimeValue1);
pfrv.setLowerBoundType(RangeValueBoundType.inclusive);
pfrv.setUpperBoundType(RangeValueBoundType.inclusive);
pf.getCurrentValues().add(pfrv);
f.add(pf);
f is Fields object and pass that to viewer.

How to define the Previous Year Up to Date in BI 7?

Dear Expert,
I have got a BI 7 report requirement which needs to restricted a key figure with Previous Year Up to date.
I have found a time variable as Current Year Up to Date but not able to find the one for Previous Year Up to Date.
Is it possible that I can use it as below to restrict the Key Figure:
ZMP_CTYD (Current Year To Date) -1 (current year to date with the off set set to -1)?
If this is not a right way, could you let me know what is the correct way to restrict the Key Figure for Previous Year Up to Date?
Further information about the requirement:
I need to get the difference between current year up to date and previous year up to date for a key figure.
For example, to get the difference between the amout related to the preiod between Jan 1, 2008 and May 22, 2008 and the amount related to the period between Jan 1, 2007 and May 22, 2007.
Thank you very much!
Arthur

Hi,
YTD and CTD are different. One is all the way till year end and the other one is through current period. One way of doing this is to define your restricted KF definition. You can use the existing Variable that you already have and insert / restrict posting period from 'time dimension" 1 - 16, in most cases there are 16 period, or 1 to "latest period" depending on what you have. The key here is your " POSTING PERIOD" restriction
Hope this helps
assign points if helpful

Previous Year Data in Crystal Reports

Hi Experts,
I need to generate crystal report with current year sales data, and previous year sales data.
How to get previous year sales data in crystal reports (Here am Using BEX Query as a Data source).
Please do need ful

Moved to BEX forum

Data per month and previous year

Hi all,
I have a requirement that is to show 2 columns, one for the actual data for a month and the other one to show the data for the same month of previous year.
For example:
Month   Profit_Center Actual Previous_Year
08.2010 10000           10.25 12.50
I know that I can create the second column filtering by same month-12, but when i show the Month,the result is:
Month    Profit_Center Actual Previous_Year
08.2009 10000            10.25   0
08.2010 10000             0         12.50
We want to show just one row with the actual month and both columns. How can I do it, without change the backend. I would like to do it in front end (in query designer).
Regards, Federico

Hi Sukhi,
Thanks for your answer. I have tried with offset also, but the data is filled in 2 rows cause of i am doing a drill down by Calmonth.
Year/Month | Actual Data | Data of previous year
(08.2010) | 150 | 0
(08.2009) | 0 | 80
And I want to show just one row, like this:
Year/Month | Actual Data | Data of previous year
(08.2010) | 150 | 80
The idea of this is to compare the data between the month that i put in the preselection and the data of same month but the previous year.
Thanks in advance for your help, Federico

Compare month sales with previous year same month sales

hi all.
we need to compare given month of this year with same month of last year. we need to compare sales quantity and value.
the query is on 0RT_C40 multiprovider. We have tried all options using 0Calmon, calday, fiscal year... but whenever we specify offset, we are not getting data. there is valid data for previous year.
plz let us know what else to do? check with 0RT_C40.
thanks in advance.
regards: gaurave

Gaurave,
Are you selecting the time period in a selection in columns or rows, or are you selecting the time period in the Filter or Free Characteristic area.
When you make the initial selection of say Period 11.2007 in the Free Characteristic area, and then within a selection but on an offset to derive 11.2006, the fact that you have made your selection of 11.2007 in the Free Char area will restrict the entire query results to this time period.
Both your picks on time should be in selections in the Columns or the Rows.
Regards
Gill

Previous year figures in planning book

Hi all,
I want to show the previous year figures in the planning book.
According the help documentation of planning books it must be possible to add actual data and previous year figures (Demand Planning - Demand Planning Process - Planning book design - Planning book: "Add rows containing actual data from the current year and/or the previous year").
Actual data is easy by refering to 000 version. But how can I add previous year data?
Thanks for your help
Jean

I think what it means is that if you go to the dataview tab in the Planning book design you can see a field called Initial Column.
If you use initial column you will be able to add all the buckets in the period previous to the first future period. Its not necessarily last year but previous periods.
(though i dont understand what you menat by seeing actual using 000 version)
It makes more sense in an SNP planning book for a KF like Stock
as the help says...
"The initial column covers the time span from 1970 until the beginning of the first future period minus 1 second. The data is read from a key figure that is stored in liveCache orders or liveCache time series. However, you can also populate this column with data using a macro, such as has been done with the Initial stock key figure in the standard Supply Network Planning data view.
Enter one of the following values:
Blank - No initial column
L - The initial column is displayed on the far left of the table.
R- The initial column is displayed on the far right of the table.
C - The initial column is displayed between the past planning horizon and the future planning horizon."

Custom Exit for determining previous-year time range

Dear all:
I have a problem about custom exit:
We have created a new object for combining Fiscal Year/Month and Period. So the format will be shown as " yyyymmp"
now we have one requirement which is determining the same period but previous year based on user input. For Example, if user input start and end period as
"2006041" and "2006111". There are should be 2 custom exit which are able to convert the user input to be "2005041" and "2005111". We created 2 custom exit for telling the previous-year period.
Then based on this converted time range, we should be able to extract applicable data. But after testing, we cant get supposing result. The code is following:
We will be very grateful for any input. thank you all so much
Calculate (Start)previous year/month/period by current
*year/month/period
*user-entry calendar year/month/period
WHEN 'ZFACLV19'.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = 'ZFACYMP1'.
        CLEAR l_s_range.
        LOC_YEAR = LOC_VAR_RANGE-LOW(4).
        LOC_MONTH = LOC_VAR_RANGE-LOW+4(2).
          LOC_YEAR = LOC_YEAR - 1.
        L_S_RANGE-LOW(4) = LOC_YEAR.
        L_S_RANGE-LOW+4(2) = LOC_MONTH.
        L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW6(1).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
Calculate (End)previous year/month/period by current
*year/month/period
*user-entry calendar year/month/period
WHEN 'ZFACLV20'.
break ab_william.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = 'ZFACYMP2'.
        CLEAR l_s_range.
        LOC_YEAR = LOC_VAR_RANGE-LOW(4).
        LOC_MONTH = LOC_VAR_RANGE-LOW+4(2).
          LOC_YEAR = LOC_YEAR - 1.
        L_S_RANGE-LOW(4) = LOC_YEAR.
        L_S_RANGE-LOW+4(2) = LOC_MONTH.
        L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW6(1).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
SzuFen

Hi,
Try with following modifications:
ZYEAR1(4) = LOC_VAR_RANGE-LOW(4).
ZYEAR1(4) = ZYEAR1(4)- 1.
ZMONTH1(2) = LOC_VAR_RANGE-LOW+4(2).
CONCATENATE ZYEAR1(4) ZMONTH1(2) INTO LOC_VAR_RANGE-LOW(6).
With rgds,
Anil Kumar Sharma .P

Multi-month, year, and date-range views

My apologies for wasting everyone's time if I've missed something really obvious here, but am I correct in concluding that there is no way to generate anything beyond a static one-month view in iCal? No multi-month view? No year view? No "view date range"? At this stage of the game, how is it possible that something so elemental could be omitted from this program?
At this point I'm reduced to exporting each month to a pdf file and then arranging them as tiles on the screen. But there has to be a better way.
Short of a new version from Apple, are there any plug-ins that would do this? Does anyone have any other work-arounds? Thanks in advance.

A quick search of the forums shows that this is a HIGHLY sought after feature (including by me). We all need to use the feed back link (below) to let Apple know this. In my experience with the tech support folks, they seem to have NO idea about what these forums say. In the past I have actually had them log in to these forums and search the issue I was calling them about and they have been blown away when they see the hundreds / thousands of posts with the very same thing they're discussing with me. So, as the wise man says .. "you don't ask, you don't get!" Use the form and let them know...
http://www.apple.com/feedback/ical.html

How to use previous year keyfigure data in current year for other keyfig

Hi Expert,
I have 1 requirement wherein I need to use previous year data for some keyfigure calculation.
Details are as follows:
I have designed query with CKFs Turnover & UVG (in rows) & Fiscal year period in columns.
Suppose Keyfigure Turnover data is displayed from Apr2009 to Mar 2011. In UVG: for Apr 2010, i need Turover data of month Apr 2009, for May 2010 turnover data of May 2009 similarly for other months.
As per my understanding, I need to use customer exit which will store kf turnover data in internal table & in turn it will be used for UVG.
But I'm not able to put it into syntax.
Kindly suggest your inputs in this scenario.
Thanks,
Shamkant

Hi
Note that the variable ZCALCCALMTH is exit type and variable ZCALMTHREF is ready for input.
WHEN 'ZCALCCALMTH'.
IF i_step = 2. "après le popup
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZCALMTHREF'.
IF sy-subrc = 0.
CLEAR l_s_range.
year1(4) = loc_var_range-low(4).
year1(4) = zyear1(4) - 1.
zmonth1(2) = loc_var_range-low+4(2).
CONCATENATE zyear1(4) zmonth1(2) INTO loc_var_range-low(6).
zyear2(4) = loc_var_range-high(4).
zyear2(4) = zyear2(4) - 1.
zmonth2(2) = loc_var_range-high+4(2).
CONCATENATE zyear2(4) zmonth2(2) INTO loc_var_range-high(6).
l_s_range-low = loc_var_range-low(6).
l_s_range-high = loc_var_range-high(6).
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
bye
Boujema

Date Range for a fixed fiscal year

Dear All,
How to write a code to fix the date range for 12months only. Example like mine selection should be between one fiscal year only.
I have check that the date is of one year range like 1.05.2008 to 30.04.2009
month bt 05 & 04 for one particular year. how to write the code.

hi,
check for the year like this.
if v_date1(4) EQ v_date2(4).
endif.
this will check for the first 4 characters of the date string which is the year.
regards,
Peter

Date range previous year?

Similar Messages

Maybe you are looking for