Date View, I'm sruck in it

Somehow I got in the date view and when I click on photo browser I get only one picture and have to scroll through the others. I want to get back to the place where I can see screens full of photos.
MartyL

Barbara, After hours of trying, I figured I'd just go ahead and punch every posssible button. I ended up looking at the slider bar, thinking it was for audio volume ... bravo!! That did it. My one picture gradually turned into as many thumbnails as I wanted to view on the screen. Thanks ever so much for helping and you did help!
MartyL
PS Is Grant and family OK? He reallly was a gem at the challenge!

Similar Messages

Can not view data in Dimension Data Viewer

Hello Forum,
Has anyone run into this one yet? with OWB10gr2
we have created a dimension called store, it has a simple hiearchy"
store-->category-->primary category-->Busines Unit
The dimension validates and deploys sucessfully - we have seen the notes to choose Deploy All for configuration instead of the default, reason being that if you don't choose Deploy All you will not be able to view it through the data viewer
We have mapped the data from our oracle staging table to the dimension and our map has run without error.
We can see data in the underlying table that supports the dimension, but when we open the dimension with object editor and try to view the loaded data via the dimension data view we get nothing?
What's up with that?
thx again
monalisa

You're probably running into the same known bug we hit. See the OWB 10gR2 release notes, under "Known Issues / OLAP Catalog". Probably hitting the mentioned OLAP bug 4945008.
Hope this helps,
Scott

I can not see data in data viewer

Hi,
I use OWB 10g Relase 2. I have one table and I imported table metadata to OWB. I load data to table with pl/sql script, Now I do not see data in this table in data viewer. I see data in SQL*PLUS
I tried deploy table and run script to load again. Same problem.
I run mapping from this table. But target object is empty as well.
Thanks for advice
Jerry

my fail, I forgot commit transaction

Data View Web Part - List of Subsites and Document Libraries under Current Site - Must be able to Package as Site Template in SPDesigner

Hi Guys,
On the home page of each sub site I would like to be able to show a list of subsites and Document libraries that are under the current subsite.
I started investigating a solution using Datasources with SOAP requests sent to the server but it is very difficult to understand how to surface it on the Data View WebPart.
I have tried with the search results webpart but the problem is that it does not work well when packaged in a Site Template.
Please advise.
Thanks and Regards,
Rhyan

Ok,
Here is the problem:
When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
I searched all over and cannot find this documented anywhere.
Who do I contact to have Microsoft document this?
It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

Unable to see live data view for a access db

I'm using the following:
Asp.net C#
Server 2003 Sp2/
DW CS3
Access db
I'm attempting to connect to a "local" db on my server.
I use the database connection string"
Provider=Microsoft.Jet.OLEDB.4.0;
Data Source=C:\catalog\Catalog\files.mdb;
Persist Security Info=False
ole db connection
While in the data link properties window the connection is
successful but in the ole db connection window I get "An
unidentified error has occurred".
If I just press ok I'm unable to see any of the table in my
db.
All I want to do is setup the Live Data view
Thanks in advance for all your help.

"madhooper" <[email protected]> wrote in
message
news:fcc6vt$jd6$[email protected]..
>
>
> I'm using the following:
>
> Asp.net C#
> Server 2003 Sp2/
> DW CS3
> Access db
>
> I'm attempting to connect to a "local" db on my server.
> I use the database connection string"
>
> Provider=Microsoft.Jet.OLEDB.4.0;
> Data Source=C:\catalog\Catalog\files.mdb;
> Persist Security Info=False
> ole db connection
>
> While in the data link properties window the connection
is successful but
> in
> the ole db connection window I get "An unidentified
error has occurred".
>
> If I just press ok I'm unable to see any of the table in
my db.
>
> All I want to do is setup the Live Data view
>
> Thanks in advance for all your help.
Did you configure your testing server?
Set up a testing server
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-79e0.h tml
Preparing to build dynamic sites
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-7a31.h tml

History and Future Bucket of the Data View

Hi Experts
As per my Client Requirement Planning for the Next year Jan 2010 u2013 Dec 2010 which Starts in the second Quarter of the Year 2009.
They need historical data (Historical Time Bucket) of Last 3 years in the monthly bucket and Future bucket for Jan 2010- Dec 2010.
My query in this regard to design Data view which need to Show Historical periods of Last 3 yrs from current month and Future Bucket as Jan 2010-Dec 2010 to input the Forecast.
The next planning Cycle would start in the second Quarter of the 2010 to forecast for the Jan 2011 to Dec 2011. When they plan for the Year Jan 2011 u2013 Dec 2011 the data views should be automatically roll or update with future bucket Jan 2011-Dec2011 and History Bucket with three years in the monthly bucket from the Current Month.
Please give your Valuable Suggestions with regard to above requirement.
I tried by Giving Planning Start Date as 01.01.2010 , but it is not fulfilling the above requirement.

Hi Anuradha
Thanks for you quick reply.
Assume that we are in the Month of June 2009, My planners start the planning process for the Jan 2010 - Dec 2010.
If i take 1 year it wont help me , Future Buckets will be till May 2010.
If i take 17 Months as the Future Buckets , Future buckets are displayed till Dec 2010.
Till June 2010 In between Planners can have Revision , and may again change the Forecast.
Suppose Assume that we have revision in the month of March 2010 , Here Future Buckets are displayed till October 2011.
How to make my data view time bucket in the synchronized with future Periods.
Thanks in Advance
Mani

'connect without context' profile takes away data/view data rights in model

Demystify ODI Security -- Documentation is very weak on this topic.
Non-generic profiles-This concept works perfectly well for projects/folders/packages.
But as soon as I bring in the new profile: CONNECT_WITHOUT_CONTEXT, the user loses the ability to query data from within ODI.
(‘data’, ‘view data’ options in the model/datastore section).
I have tried NG versus generic profiles of metadata admin-but somehow the data/view data option errors out:
Cannot display table’s data.
But if I use the regular CONNECT, the options come back.

That is because the CONTEXT links the Logical and the Physical. All Model objects are related to a logical schema. Each logical is related to a physical schema via the context. If you have no context, then you break the link, therefore ODI does not know 'where to look' for the data and will error.
Cheers
Bos

Bind multiple fields to one node in data view

I have a need to have an interactive form where data from a single data source is displayed in multiple fields on the form. In addition these fields are open for input. I have bound the multiple fields on the form to one node in the data view. The data is being displayed in the multiple fields. This form is being routed thru workflow so various agents are updating the form. The problem that I am having is that the form only seems to allow input in the first field on the form but not the other fields that are tied to the same data source. For example, field A and field B are bound to node SUMMARY. I can add/change/delete data in field A but not in field B. After I have done some entry in field A, I can then sometimes make changes in field B. We have a requirement that field A be enabled for agent #1 but field B is invisible. Later in the workflow, agent #2 needs to make final changes on a "summary" page so agent #2 had field B enabled.
Does anyone have any idea how to correct this data entry issue so that data can be entered into either field that is tied to a single node?

Having multiple fields in the backend is not an option. I will not go into the business reason in detail but the last page of the form contains a final version of data pulled from various locations on the form where the data on the other pages was input by multiple agents in the process flow. The last agent in the workflow needs to put the "finishing touches" to the data and should not have to search all over in the form to find the appropriate data fields.
I have found 2 possible solutions and would like to know if anyone can recommend one over the other.
First solution - bind multiple fields on the form to one node in the data view. This seems to work correctly on the form and data can be entered into either field, with the data being passed back to the webdynpro context in the one node in the data view (corresponding node in WD context).
Second solution - the node/attribue in the WD context must have the same name as a DDIC element. The node in the data view must have this same name. The field names on the form must also have the same name. Define the binding for the field names as Global. I have not validated that the data is passed back to the WD.

How to get rid of the "mil" in Data View's large Display meter

Hi, there! I have two analog voltage inputs that I am having signal express V2.5 to collect data on. The first input is scaled to inches while the second input is scaled to pounds. For some reason, as i bring up the large display in Data View, the meter will show this "mil" thing. It won't go away until the scale reaches 1.0000. For instance, if the scaled signal is less than 1.0000, it will indicate 900mil, 800mil, 50mil 1mil, and so on..... This really created alot of confusion for my lab.
I am hoping if you guys can tell me a way to make 900mil to become 0.900, 50mil to 0.050, and 1mil to 0.001
Thanks in advance!
Kin

Hi Kin,
Sorry about this. I don't believe there is a way for you to change this in SignalExpress 2.5. However we did add this ability in SignalExpress 3.0. Most displays now have a property page, including the Large Display, which allows you to specify the format and precision shown, including to remove the SI notation. By right-clicking on the Large Display and select Properties, go to the Format & Precision tab, and select the Floating Point option (instead of SI notation).
Again, I'm sorry to say that this option is only available in SignalExpress 3.0+.
Phil

No data appear on "measure data view "

I now do some execises using the OLAP Analytic Workspace Manager and Worksheet.
I follow the examples in the online documents 《Oracle® OLAP Application Developer's Guide 10g Release 2 (10.2)》
At the end of all steps, using the measure data view to view the measure's data ,but I cann't see the sheet with data.
however ,I can see all dimension's data in the view the dimension through right click the dimension.
the example in the online documents have analyze data.

I have put the question in Chinese on the following web site.
http://www.itpub.net/showthread.php?s=&postid=8518644#post8518644
but no one answer me .
We can see the picture on the above web site , no data in my test sheet .but the example in online docments have data.

How to see a stream of a signal in the Data View while monitoring a signal.

Hi!
I'm migrating from an older data acquisition software for SignalExpress. With the DAQ old had a way to monitor the signal so that the software screen I saw on the timeline and as I increased or diminished the scale of the X axis (time), I saw more or less signal transitions in screen, respectively. For example, if the time scale (x axis) was set to 5 seconds and the signal that I was monitoring commute every 1 second, I would see on the screen of the software 5 sequential pulses.
I am not able to configure my data acquisition that way. What I have noticed is that the scale of the X axis is limited to the value of the "Samples to read." With that, I see the sign on the software screen is instantaneous and not a sequence of pulses.
I intend to monitor the signals are random signals originating from idependentes and switching relays.
In summary, I believe that the solution to what I want to do is increase the scale of the axis X. How to do this?
I use SignalExpress 2011, USB-6363 DAQ step and Digital Line Input.
Thank you.

OKors,
First, sorry for the delay in responding to you. And second, thanks for your reply.
I will try your suggestion: continuously scrolling "strip chart".
To try to clarify, what I want is to merge than I can with Digital Graph - signs lined up vertically with the display type Chart, where it can act on the parameters of History Lengh, as you suggested, to achieve "curb" the transition graph .
If using the first solution, Digital Graph, the screen transitions are very fast. On the other hand, if using the graph chart type for digital signals, they overlaps, since all have the same value - 0 or 1.
The idea is that these two characteristics in a single graph (Data View). I believe something to be simple, but I'm having trouble mounting this setting.
That's it. Any news ... I'll post here.

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

BASIC PLANT DATA VIEW in BAPI_MATERIAL_SAVEDATA

HI,
    I need to save some fields in the BASIC PLANT DATA View using BAPI_MATERIAL_SAVEDATA. Would anyone know the HEADER VIEW DATA I need to select and how I am going to go about this?
I am able to successfully save a material but I am having problems in creating the material's BASIC PLANT DATA VIEW.
Thanks!

Check out this code:
*& Report ZBAPI_MATERIAL_SAVEDATA
*& AUTHOR
*& PURPOSE : THIS REPORT USES BAPI MATERIAL SAVE DATA TO UPDATE AND CREATE
*&           THE MATERIAL
REPORT ZBAPI_MATERIAL_SAVEDATA NO STANDARD PAGE HEADING MESSAGE-ID (ZHNC).
TYPES:BEGIN OF TY_MAT,
       MATERIAL(4),
       IND_SECTOR(1),
       MATL_TYPE(4),
**       BASIC_VIEW(1),
**       SALES_VIEW(1),
**       PURCHASE_VIEW(1),
*       STORAGE_VIEW(1),
       MATL_GROUP(9),
       BASE_UOM(3),
       BASE_UOM_ISO(3),
*       MATL_GROUP1(1),
*       BASE_UOM1(1),
*       BASE_UOM_ISO1(1),
       PLANT(4),
       DEL_FLAG(1),
       PUR_GROUP(3),
       BASE_QTY(13),
*       PLANT2(4),
*       DEL_FLAG5(1),
*       PUR_GROUP1(1),
*       BASE_QTY1(1),
*       PLANT3(4),
       STGE_LOC(4),
       MRP_IND(1),
*       PLANT4(4),
*       STGE_LOC1(4),
*       MRP_IND1(1),
       SALES_ORG(4),
       DISTR_CHAN(2),
       DEL_FLAG1(1),
       MIN_ORDER(13),
*       SALES_ORG1(4),
*       DISTR_CHAN1(2),
*       DEL_FLAG2(1),
*       MIN_ORDER1(1),
       LANGU(2),
      MATL_DESC(40),
   END OF TY_MAT.
DATA: IT_DATA TYPE TABLE OF TY_MAT,
      WA_DATA LIKE LINE OF IT_DATA.
*decalraing flag
data: v_flag value ''.
*DECLARING WORK AREAs TO BE PASSED TO THE FUNCTION MODULE.
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
      BAPI_CLIENTDATA LIKE BAPI_MARA,
      BAPI_CLIENTDATAX LIKE BAPI_MARAX,
      BAPI_PLANTDATA LIKE BAPI_MARC,
      BAPI_PLANTDATAX LIKE BAPI_MARCX,
      BAPI_STORAGELOCATIONDATA LIKE BAPI_MARD,
      BAPI_STORAGELOCATIONDATAX LIKE BAPI_MARDX,
      BAPI_SALESDATA LIKE BAPI_MVKE,
      BAPI_SALESDATAX LIKE BAPI_MVKEX,
      BAPI_MAKT LIKE BAPI_MAKT,
      BAPI_RETURN LIKE BAPIRET2.
*INTERNAL TABLE TO HOLD THE MATERIAL DESCRIPTION
DATA: BEGIN OF IT_MAKT OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT.
DATA END OF IT_MAKT.
DATA:BEGIN OF IT_RET OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA END OF IT_RET.
*INTERNAL TABLE TO HOLD HEADER DATA
DATA: IT_EXCEL TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*SELECTION-SCREEN ELEMENTS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER: FNAME TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT 'C:\Documents and Settings\Administrator\Desktop\MATMAS.XLS' .
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
            P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
            P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
            P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK B1.
*DECLARATION OF EXCELAL TABLE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
PERFORM F_GET_FILE USING FNAME.
START-OF-SELECTION.
PERFORM F_XLS_ITAB USING FNAME
                   CHANGING IT_EXCEL.
PERFORM F_MOVE_DATA.
perform F_GET_DATA.
*&      Form F_GET_FILE
*       text
*      -->P_FNAME text
*      <--P_SY_SUBRC text
FORM F_GET_FILE USING    P_FNAME LIKE FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
   PROGRAM_NAME        = SYST-REPID
   DYNPRO_NUMBER       = SYST-DYNNR
*   FIELD_NAME          = ' '
*   STATIC              = ' '
*   MASK                = ' '
CHANGING
    FILE_NAME           = P_FNAME
* EXCEPTIONS
*   MASK_TOO_LONG       = 1
*   OTHERS              = 2
IF SY-SUBRC 0.
MESSAGE E006(ZHNC).
ENDIF.
ENDFORM.                    " F_GET_FILE
*&      Form F_XLS_ITAB
*       text
*      -->P_FNAME text
*      <--P_IT_EXCEL text
FORM F_XLS_ITAB USING    P_FNAME
                 CHANGING P_IT_EXCEL.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = FNAME
    I_BEGIN_COL                   = P_BEGCOL
    I_BEGIN_ROW                   = P_BEGROW
    I_END_COL                     = P_ENDCOL
    I_END_ROW                     = P_ENDROW
TABLES
    INTERN                        = IT_EXCEL
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_XLS_ITAB
*&      Form F_MOVE_DATA
*       text
* --> p1        text
* <-- p2        text
FORM F_MOVE_DATA .
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_EXCEL BY ROW COL.
CLEAR IT_EXCEL.
LOOP AT IT_EXCEL.
MOVE IT_EXCEL-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE WA_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_EXCEL-VALUE TO <FS>.
AT END OF ROW.
APPEND WA_DATA TO IT_DATA.
CLEAR WA_DATA.
ENDAT.
ENDLOOP.
ENDFORM.                    " F_MOVE_DATA
*&      Form F_GET_DATA
*       text
* --> p1        text
* <-- p2        text
FORM F_GET_DATA .
LOOP AT IT_DATA INTO WA_DATA.
MOVE-CORRESPONDING WA_DATA TO BAPI_HEAD.
BAPI_HEAD-BASIC_VIEW ='X'.
BAPI_HEAD-SALES_VIEW ='X'.
BAPI_HEAD-PURCHASE_VIEW ='X'.
BAPI_HEAD-STORAGE_VIEW ='X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_CLIENTDATA.
BAPI_CLIENTDATAX-MATL_GROUP = 'X'.
BAPI_CLIENTDATAX-BASE_UOM = 'X'.
BAPI_CLIENTDATAX-BASE_UOM_ISO = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_PLANTDATA.
BAPI_PLANTDATAX-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_PLANTDATAX-DEL_FLAG = 'X'.
BAPI_PLANTDATAX-PUR_GROUP = 'X'.
BAPI_PLANTDATAX-BASE_QTY = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_STORAGELOCATIONDATA.
BAPI_STORAGELOCATIONDATA-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-PLANT = BAPI_STORAGELOCATIONDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-STGE_LOC = BAPI_STORAGELOCATIONDATA-STGE_LOC.
BAPI_STORAGELOCATIONDATAX-MRP_IND = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_SALESDATA.
BAPI_SALESDATAX-SALES_ORG = BAPI_SALESDATA-SALES_ORG.
BAPI_SALESDATAX-DISTR_CHAN = BAPI_SALESDATA-DISTR_CHAN.
BAPI_SALESDATAX-DEL_FLAG = BAPI_SALESDATA-DEL_FLAG.
BAPI_SALESDATAX-MIN_ORDER = 'X'.
REFRESH IT_MAKT.
IT_MAKT-LANGU = WA_DATA-LANGU.
IT_MAKT-MATL_DESC = WA_DATA-MATL_DESC.
APPEND IT_MAKT.
CLEAR IT_RET.
REFRESH IT_RET.
PERFORM F_CALL_BAPI.
READ TABLE IT_RET WITH KEY TYPE = 'S'.
IF SY-SUBRC EQ 0.
PERFORM F_BAPI_COMMIT.
WRITE:/ 'MATERIAL CREATED OR UPDATED SUCESSFULLY WITH MATERIAL NO',WA_DATA-MATERIAL.
ELSE.
MESSAGE E000(ZHNC) WITH 'ERROR IN CREATING THE MATERIAL'.
*WRITE: / 'ERROR IN CREATIN MATERIAL',IT_RET-MESSAGE.
*PERFORM F_DOWNLOAD.
ENDIF.
*ENDIF.
ENDLOOP.
ENDFORM.                    " F_GET_DATA
*&      Form F_CALL_BAPI
*       text
* --> p1        text
* <-- p2        text
FORM F_CALL_BAPI .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    HEADDATA                   = BAPI_HEAD
   CLIENTDATA                 = BAPI_CLIENTDATA
   CLIENTDATAX                = BAPI_CLIENTDATAX
   PLANTDATA                  = BAPI_PLANTDATA
   PLANTDATAX                 = BAPI_PLANTDATAX
   STORAGELOCATIONDATA        = BAPI_STORAGELOCATIONDATA
   STORAGELOCATIONDATAX       = BAPI_STORAGELOCATIONDATAX
   SALESDATA                  = BAPI_SALESDATA
   SALESDATAX                 = BAPI_SALESDATAX
IMPORTING
   RETURN                     = IT_RET
TABLES
   MATERIALDESCRIPTION        = IT_MAKT
*   UNITSOFMEASURE             =
*   UNITSOFMEASUREX            =
*   INTERNATIONALARTNOS        =
*   MATERIALLONGTEXT           =
*   TAXCLASSIFICATIONS         =
*   RETURNMESSAGES             =
*   PRTDATA                    =
*   PRTDATAX                   =
*   EXTENSIONIN                =
*   EXTENSIONINX               =
APPEND IT_RET.
ENDFORM.                    " F_CALL_BAPI
*&      Form F_BAPI_COMMIT
*       text
* --> p1        text
* <-- p2        text
FORM F_BAPI_COMMIT .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT         =
* IMPORTING
*   RETURN        =
ENDFORM.                    " F_BAPI_COMMIT

Modify the data source of a data view web part

I have a dataView web part deployed in a template in multiple site collection. This dataView hasn't any query set up, so it loads a lot of items and this is slowing down my system.
Now I want to programmatically put a query overriding the existent (empty) one and I'm doing like this:
System.Web.UI.WebControls.WebParts.WebPart y = (System.Web.UI.WebControls.WebParts.WebPart)item;
Microsoft.SharePoint.WebPartPages.DataFormWebPart z = (Microsoft.SharePoint.WebPartPages.DataFormWebPart)item;
StringBuilder dataSourceString = new StringBuilder("<%@ Register TagPrefix=\"sharepoint\" Namespace=\"Microsoft.SharePoint.WebControls\" Assembly=\"Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c\" %>");
dataSourceString.Append("<%@ Register TagPrefix=\"WebPartPages\" Namespace=\"Microsoft.SharePoint.WebPartPages\" Assembly=\"Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c\" %>");
dataSourceString.Append("<sharepoint:SoapDataSource runat=\"server\" SelectUrl=\"http://intranet.contoso.com/sites/spc/_vti_bin/lists.asmx\" InsertUrl=\"\" UpdateUrl=\"\" DeleteUrl=\"\" SelectAction=\"http://schemas.microsoft.com/sharepoint/soap/GetListItems\" InsertAction=\"\" UpdateAction=\"\" DeleteAction=\"\" SelectPort=\"ListsSoap\" InsertPort=\"\" UpdatePort=\"\" DeletePort=\"\" SelectServiceName=\"Lists\" InsertServiceName=\"\" UpdateServiceName=\"\" DeleteServiceName=\"\" AuthType=\"Basic\" AuthUserName=\"contoso\\administrator\" AuthPassword=\"pass@word1\" WsdlPath=\"http://intranet.contoso.com/sites/spc/_vti_bin/lists.asmx?WSDL\" XPath=\"\" ID=\"SoapDataSource3\">");
dataSourceString.Append("<SelectCommand><soap:Envelope xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\"><soap:Body><GetListItems xmlns=\"http://schemas.microsoft.com/sharepoint/soap/\"><listName>Jobs</listName>");
dataSourceString.Append("<Query><Where><Eq><FieldRef Name=\"Title\" /><Value Type=\"Text\">2012_080_A_0</Value></Eq></Where></Query>");
dataSourceString.Append("<rowLimit>9999</rowLimit></GetListItems></soap:Body></soap:Envelope></SelectCommand><InsertCommand></InsertCommand><UpdateCommand></UpdateCommand><DeleteCommand></DeleteCommand></sharepoint:SoapDataSource>");
z.DataSourcesString = dataSourceString.ToString();
manager.SaveChanges(z);
In my code, I can see the DataSourceString changing, but if I refresh the page it is still loading all the data: why?!

Hi,
According to your description, my understanding is that you want to change the data view web part datasource programmatically.
We need to override the databind method like below:
public class ExtendedDataFormWebPart : DataFormWebPart
public override void DataBind()
this.DataSource = your own data source;
base.DataBind();
Here is a detailed code demo for your reference:
http://jamestsai.net/Blog/post/How-to-query-cross-site-lists-in-DataFormWebPart-Part-1-Build-your-own-data-source-for-DataFormWebPart.aspx
Best Regards
Jerry Guo
TechNet Community Support

Error message: Bind operations are only supported in a single data view.

I created a new connection handler and data view. When I started ldapsearch I got the above error message. Would like to know how caused that and how to fix it.
I tried to roll back all my modification and use the default connection handler and it even gave me the above message.
Thanks!

Thanks Ludovic!
It happened when I tried to create two different data views(view1 and view2) and two different connetion handlers (conn1 and conn2).
view1 will view all data under the root suffix, like dc=example,dc=com
view2 will view only part of the subordinate, like ou=test,dc=example,dc=com (not sub-suffix)
I set data-view-atuomatic-routing-mode to limited. So view1 will not have exclude list.
conn1(priority 33) will use view1. I also set bind-dn to be "uid=testmanager,dc=example,dc=com"
conn2 (priority 99) will use view2 with no constraint.
When I started doing ldapsearch using that bind DN of "uid=testmanager,dc=***) and expected to use conn1 (since it fell into the criterial of the bind DN), I encourted this error.
This error kept on existing even I removed the view1 and conn1. I doubt that I should recover the default setting of routing policy (data-view-automatic-routing-mode), but don't know what the default value for that, maybe "automical" or something else.
My questions will be:
1) can i create two different views like one pointing to base and the other one to sub directory?
2) What is the default value fo data-view-automatic-routing-mode?
Thanks!

Date View, I'm sruck in it

Similar Messages

Maybe you are looking for