Default Payroll Area using Personnel Area

Hi,
There is a feature called ABKRS i.e. 'Default value for payroll area'. I want to know if you can default the payroll area using personnel area / personnel sub-area because there is no field decision operation for personnel area/sub-area. Please guide me if there is any way out to it's solution.
Thanks,
Irfan Malik
SAP HR Consultant
SIEMENS Engineering Co. Ltd. Pakistan

Hi,
There is a provision to default the payroll area based on the Personnel area. If the PA / PSA decision parameters are not available at your end you can change the settings for ABKRS feature provided you have the rights to do the same.
In PE03 for feature ABKRS, select attributes and hit Change.
There you will see a Tab as "Struct" on the bottom left.
Click it. You will see various parameters EE, ESG, PA ,PSA, etc.
Only the ones that are selected will appear as decision parameters for the tree in ABKRS.
So if PA PSA are not selected, select them, save and then activate the feature.
Hope this helps.
Regards,
Shreyasi.

Similar Messages

How Personel area assign a payroll area

there is personnel area how payroll area is attached so that payroll area will comes by default at the time of hiring .

Or else,
Please follow the below path:
SPRO->
Personnel Management->
Personnel Administration->
Organizational Data->
Organizational Assignment->
Check Default Payroll Area
Thanks
Cheera

Creation of Payroll areas

Dear Experts,
My client is running payroll for all employees together. This client has four area of businesses. Now they need to run payroll separately for these businesses and they need to hire these people separately.
What are all the configuration steps I need to do for that. Eg. Need to create Personal area, Payroll area etc.
thanks in advance.
regards,
Roopesh

Define EE Subgroup Grouping for PCR and Collective Agreement Provisions. V_503_B
pay scale type. Table: V_T510A.
Pay scale Areas V_T510G.
Check Assignment of Pay Scale Structure to Enterprise Struct (V_001P_C)
Determine default for payscale Data (TARIF)
Revise Payscale Groups & Levels
Employee Subgroups for primary Wage types
Personal Sub areas for primary Wage type
Revise Default Wage types (V_T539A)
Define Valuation of a base wage type
Indirect Evaluation is a method to calculate the eligible amounts (default) for some of the wage types. INVAL is the Indirect Evaluation Module used to meet the Indian specific business requirements. INVAL with Module variant A shall be used to default fixed amounts and Variant B , C shall be used to calculate amount on percentage basis on some other wage type.
Amounts for wage types calculated on percentage basis (INVAL – B , INVAL - C) shall be configured here. INVAL and module variants shall be maintained for required wage types in Wage Type characteristics node.
Enter Indirect Valuation Module Name (PRZNT), Valuated Wage Type (Wage Type Code – for which amount is calculated by using INVAL – B , INVAL - C), Enter serial no, if the amount is calculated on wage types, start date and end date for the, Base Wage Type (on which amount is calculated for valuated wage type) and percentage (to be calculated on base wage type).( V_T539J).
Payroll Basic settings
Define Period parameter
period parameters. . (V_T549R)
Define Date Modifier
Define Default payroll Areas (ABKRS)
Check Payroll Accounting Area
Generate Payroll Periods.
Generate Calendar for Cumulations
Perosnal Areas and PSA and EG and ESG you can derive based on your client requirement and mapping
Check for all the configuration which mentioned above and create separate Payroll control record based on your requirement.
Kindly let us know if you need any further information

Promotion action run - payroll run - Chng in payroll area in IT1 not allowe

Hi Friends,
My client has the following query:
"One of the employee has been promoted from employee group 2 (Workmen) to employee group (Management Staff). We have run promotion action now, that is after running pay roll for the month of May 2011. Now it is not allowing to change the pay roll area in orga. assignment effective from 01.04.2011, please do the needful on priority to run pay roll for the month of May 2011."
Can anyone please help me and let me what needs to be done in such cases.
Eagerly awaiting your reply.
Thanks in advance.
Regards,
Evangelist@

Hi,
As you said that you have already configured ABKRS feature for defaulting payroll area based on your employee group.
So when you run the promotion action it should actually pick up the default payroll area according to new employee group.
Are you able to do that? or did you manually change it on IT 0001 screen.
If you want it to be automatically defaulted then check your feature DFINF it should have value X if you want it from customising or leave it blank if it should be copied form the previous record
cheers
Ajay

Promotion action - payroll run - not allowing to change payroll area in IT1

Hi Friends,
My client has the following query:
"One of the employee has been promoted from employee group 2 (Workmen) to employee group (Management Staff). We have run promotion action now, that is after running pay roll for the month of May 2011. Now it is not allowing to change the pay roll area in orga. assignment effective from 01.04.2011, please do the needful on priority to run pay roll for the month of May 2011."
Can anyone please help me and tell me what needs to be done in such cases.
Eagerly awaiting your reply.
Thanks a ton..
Regards,
Evangelist@

Hi,
As you said that you have already configured ABKRS feature for defaulting payroll area based on your employee group.
So when you run the promotion action it should actually pick up the default payroll area according to new employee group.
Are you able to do that? or did you manually change it on IT 0001 screen.
If you want it to be automatically defaulted then check your feature DFINF it should have value X if you want it from customising or leave it blank if it should be copied form the previous record
cheers
Ajay

How do we define 2 payroll areas for one personal area using ABKRS feature!

hi
i was trying to define 2 paryroll areas for one personal area using ABKRS! how can i do it.
rgds,
tara tarashaa

Tara:
Aside from country grouping and personnel area, the decision making for this feature can be branched further by personnel subarea, employee group and subgroup. You can use these to dictate which payroll area it should be for the same personnel area.
Rgds.

How to control PNP LDB using personnel are alone

Hi all!
Any body can tell me, how control the pnp ldb using personnel area and employee group. bcaz in the standard selection screen it is given as
<u>selection.</u>
Pers.area/subarea/cost cente :
Employee group/subgroup
Thx,
palani

Hi Palani,
Open the ABAP report in change mode
     Select GOTO from Menu Bar
        Choose ATTRIBUTES from dropdown list
           New Window will pop-up
               Click on button "HR REPORT CATEGORY"
                  New Popup will apeear
                     Report selects using:
                     Master data
                     YOU will find lots of "rep.class" to choose here...
Hope this will serve your requirement...
Best Regards,
Aslam Riaz

Personnel numbers under a given payroll area

can anyone let me know any macros/ fm / utility that gets the personnel numbers given a payroll area , begin date and end date ?
How to get the personnel numbers under a given payroll area , is it okay if simply by looking in table PA0001 ?
Thanks!
Uma

Please read this -:)
<a href="/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports to deal with HR Payroll reports</a>
Greetings,
Blag.

Payroll Areas/ Personnel Areas / Company Codes

Hello Experts,
I would like to know how to link a Payroll Area to a Personnel Area (Or a Company Code) as I have created the Payroll Areas, and the Companies, but still I can't link them to each other (Or is it linked to Employee Groups)
I really have no idea about that !!
Thanks in advance

Hi ,
Check the ABKRS feature
T CODE - PE03
Feature - ABKRS
Here u can maintain the bydefault Payroll Area as per the Company Code , Employee Group , Employee Subgroup , Country Grouping , Transaction Class for Data Retention
Regards,
Mahesh

Assigning Payroll area to Personnel Number

How to assign payroll area to personnel number?
From 0001 ( org. assignment what are the steps to be followed ? )

GO into tcode pe03 and configure the feature ABKRS asp the req of the customer.
For example - suppose For india you have 2 personnel area PA1 and PA2 for which you have 2 payroll area X1 & X2.
Now Go into feature ->
in otherwise section maintain decision parameter molga (may be present already)-> retrun value 40 -> now decision parameter perseonnel area -> maintain 2 return value PA1 & PA2 -> For these maintain final value as X1 & X2 for PA1 and PA2 respectively.

HR : Unable to assign employees to NZ payroll areas using tranfer function.

Hi,
While doing transfer function unble to assign employees
to NZ payroll areas .
I thought there are missing entries in T549Q table for particular period but after updating this table still problem is not getting resolved. Can anyone please help me finding out the problem area.
Regards
Hema

Can any one please help me with followinf issue....
Thanks in advance
Hema

Can we restrict the data to be entered in payroll area

Can we restrict the data to be entered in payroll area?

Hi,
In my lilmited knowledge I think we can only default the payroll area using ABKRS feature.
We probably have to use a user exit of BADI to restrict it.
cheers
Ajay

UK Payroll (Payroll Area)

Hi Experts
A new payroll area has been set up for MM from NN(with employees being ended on and restarted on different payroll areas/personnel numbers) an example of this is personnel number 1234 (the new number), adminstrators need to input the past absences against the new personnel numbers in the new payroll area and they are getting the error message (Does not Exists in IT0001) .Please analyise and let us know your findings.
Thanks
Githa

Hi Sri,
I cant give Proper inputs now bcz i am not aware of the Eaxct Reuirement still Investigating.Please look in to the Following it may be help to know the Requirment
I think this is Related to "Multiple Employement"
Bcz for the New Perner IT000 Over view.(Perner Numbe 60256)
Start Date      End Date     Action Type
01.04.2009    31.12.9999   New Starter
In IT0031 have the Two Perner Numbers for the New Perner.(15025 & 15024)
The Inputs of these Two perner Numbers
For the Perner 15024      IT000
Start Date      End Date     Action Type
01.04.2006    31.03.2008   Data Migration Hiring (Legact)
01.04..2008    31.03.2009 Automatic Pay Increase
01.04.2009     31.12.9999   Leaver
Perner 15025 : IT000 Over View
Start Date      End Date     Action Type
01.04.2006    31.12.2007   Data Migration Hiring (Legact)
01.01.2008    31.12.9999   Leaver -Multiple Employment
Thanks
Githa

Change payroll area in middle of the month

Currently I had face a problem where this staff whose is reentering the company in the middle of the month. Before this he use payroll area XX, after he reenter the company in the middle of the month, the payroll area need to be change to AA. But the system did not allow this with this error: "Payroll area change possible only at the end of the payroll period". So i was force to change the payroll area only when the date was at the end of the payroll period.
Is there any way to rectify this issue? I also being informed that there was a standard report to do this, but i could not find it,weather is it exist or not.

Is there any way to do by force, as i had been told that it could be done by using a standard program, but he could not remember it.
Is it payroll could not be running if half month payroll are is XX and other half is AA if possible to change the payroll area? Why?

Payroll area

Hi Expert,
i have 3 emp subgroup,
1- salaried
2-hrly
3-Trainee
the payment date for top management salaried employees on 25th of every month , payment date for lowerlevel salaried employees on 5th of everymonth, and for other employees payment date is on every wednesday.
in this case how many payroll area i need to create?
2 payroll area with 3 date modifier is fine?
and in control record
how i need to mention payroll period & earliest retro for weekly employees
Thanks
Anish

Hi Sikinder,
How come 1 period parameter?
because one payroll i need to run on monthly and another one in weekly so i need to use 2 period parameter rt?
correct me if i'm wrong
Anish

Default Payroll Area using Personnel Area

Similar Messages

Maybe you are looking for