Default print settings in the Project Planning Board CJ02N CJ2C

Hello
When you print the Project Planning Board CJ02N/CJ2C - there is an option to change the page setup.
I would like to change the default settings for left,right, top and bottom margins for all users.
Can anyone suggest where this would be done ?
Thankyou
Ros

Hi Varun,
Thanks for the fast repply!
Please see below the CJ2C and CNE5 screen shots:
Thanks and Regards
James

Similar Messages

  • Network Header at  the Project Planning Board gantt chart

    Hi again,
    Does anyone knows a configuration to allow the network header to appear in the project planning board gantt chart?
    Tks
    James

    Try transaction OPT7
    Double click on the appropriate Profile
    On the Table Area Tab, select the flag for the field "Display Network"
    Hope this helps
    Regards
    Steve

  • Default printer settings for HP Deskjet 882c

    All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
    Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
    What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
    Pulling my hair out here ... help would be lovely!

    You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up. 
    I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
    Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
    You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
    Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
    Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
    http://goo.gl/0WUyIe
    (*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
    After enabling the web services again the printer code area will still be blank if you are out of cyan ink. 
    Regardless the new code will display on the front panel (under web services).
    I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
    I work on behalf of HP.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Project planning board report to microsoft project report

    hi all
    good morning
    i want to convert the project planning board report to Microsoft project and primavera report ...
    please guide me through the steps......
    Thanks in advance
    Surya

    Hi,
    OpenPS for Microsoft project (OpenPS4MSP) is an Add-on to SAP R/3 Project System which enables users to transfer project related data between Microsoft Project and R/3 Project System.
    Refer SAP Note: 579761 for OpenPS.
    Then to integrate SAP and Primavera , you can use various integration tools available. One of them is Primavera Inspire.
    Refer :
    http://www.oracle.com/applications/primavera/primavera-inspire-for-sap.html
    Regards,
    Amit

  • Viewing CO versions in project planning board

    Hello,
    I have saved two CO versions of my project. When i go to the project planning board the approved plan column is full of data and looks great but the other version as no information. I have SAPALL so this isn't an authorization issue. Can someone please help me work out was is wrong?
    Thanks a lot
    Jason

    Hi,
       Basically there are possibilities of creating Plan version.
    1) one you can create in CJ40 by manually feeding the Version ex:0,1,2 etc....
    2) create one version in CJ40 and copy the same to another version in CJ9BS.
    once the versions are created make the changes of values in the respective versionand save the changes.
    Please check the version comparission in S_ALR_87013539 - Project Version Comparison: Plan.
    Comming to plan board which fields did you picked up for comparission?
    Rgds
    Sudhir Reddy

  • Project Planning Board - Customising

    Hello All,
    Do we have an option to customize project planning board.
    If yes where exactly in SPRO can we do this, and does anyone have any documentation on what all can be configured in project planning board.
    Points assured.
    Thanks in advance.
    Warm Regards,
    Jatinder Bansal

    Project planning board customization is available at IMG. path IMG>PS>Structures>Project Planning Board.
    Planning Board is based on Gannt chart. the customization includes, Define Time Profiles, Define profiles for time scales ,  Define scale for the time axis, Define Profiles for the Project Planning Board, Maintain Report Assignment from the Planning Board & Capacity Leveling/Capacity Evaluations.
    Regards
    Murali

  • How can I set the default print settings of my document as color.  I want the default print setting to be color when someone opens a document.  similar to duplex print preset is there a color print preset?

    How can I set the default print settings of my document as color.  I want the default print setting to be color when someone opens a document.  similar to duplex print preset is there a color print preset?

    Hi,
    Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
    Next try changing the settings by selecting the saved preset.
    That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

  • When I open E12 to print, the printer settings do not reflect my default printer settings.

    When I open E12 to print, the printer settings do not reflect my default printer settings.  After I change the settings in E12 and print and close, when I reopen E12 the printer settings are back to what E12 originally decided they were.  What am I missing?

    Not on the list for supported printers http://support.apple.com/kb/ht4356

  • Excel 2010 not using the default print settings

    Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
    basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
    issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
    tried restarting print spooler service and re-installing office but this has come to no avail,
    any ideas would be much appreciated!

    Hi,
    This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
    To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
    To specify these settings, follow these steps:
    1.Start Excel, and then open the workbook you want to change.
    2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
    3.Click the Page tab.
    4.Under Paper size, click the paper size that you want.
    5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps:  ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
    tray in the Other pages list.
    Default tray is the default setting in both of these lists.
    ◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
    To do this, click the appropriate paper tray in the First page list and in the Other pages list.
    6.If you want to change the page orientation or its page margins, click the Finishing tab.
    7.Select the options that you want.
    8.Click OK.
    9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
    Jaynet Zhang
    TechNet Community Support

  • Reason for delay on the DS planning board grafic

    Dear SAP Fans
    Have you done any development on the DS planning board to show reason of the delay of a planned order?
    We are implementing PP/DS and this is a hard requirement for the acceptance. The users have another schedule system with this functionality, when an order is delayed you can see the reason in the chart by clicking on the delayed order. When they see the reason they can see all the constraints that prevent the optimizer to schedule the planned order in an early date, for example:
    - Order 0001 is delayed to 15.04.2011 because;
             - Reason 1:  Machine A is unavailable up to 30.03.2011
             - Reason 2 : Componente 0001-01 have purchase order scheduled to 15.04.2011
             - Reason 3 : PRT is under maintenance up to 10.04.2011
    With this information on hand the user can take some actions to antecipate the order in case this order is causing delay on a priority A customer order. For example the actions could be:
              - For reason 1, rearrange orders in the machine to schedule the order in an early date.
              - For reason 2, negotiate with supplier an early delivery date.
              - For reason 3, negotiate with plant maintenance to accelerate it.
    Maybe something related to look for the delay log of a specific order.
    Appreciate any insight.
    Thanks and BR

    hello,
    first check the operations of the order.
    right click on the produce operation and navigate to Order Processing.
    In the order tree open all nodes for operations.
    Is the set up activity visible there?
    If yes doble click on the activity.
    does the set up activity have a duration?
    If yes check the status of the set up activity.
    go back to the planning board.
    in the menue select extras-> Legend
    a pop-up with the graphical objects is displayed.
    Check the graphic objects for the activity status you read before.
    did you change the customizing settings for the graphic object?
    If yes check them again or reset them to the default SAP settings.
    I had a similar problem with a set up activity when I wanted to change the color of the activity according to the set up group. I  changed the settings in the customizing Maintain Planning Board Profiles.
    It is very difficult to maintain the decision table for graphical objects.
    If you did this recheck the decision table.
    Go back to the SAP default settings and check the planning board again.
    Are the set up acitvities displayed now?
    Then the porblem is with the decision table.
    rethink every step again.

  • Any way to override default printer settings into a PDF

    Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents.  We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand.  This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change.  The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different.  While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
    As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings.  For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
    Is there anyway to do this?  I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc.  Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
    -Brandon

    Hi Brandon,
    You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
    1. Open the PDF in Acrobat
    2. Open Document Properties dialog (using Ctrl + D)
    3. Select the "Advanced" tab
    4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
    Please let us know if this works for you
    Thanks,
    -Shilpi

  • Default print settings

    I need to change my default print settings to black and white. I've changed it in the print dialog box to grayscale, but when I print coupons, that box doesn't come up; it just automatically prints in color. My Dell desktop let me change the default print settings for my exact same printer, so it's not a problem with the printer. Please help. Thanks.

    Have the same issue.  Did you get it resolved?

  • Push default printer settings from server - setprinter.exe ?

    Hi,
    I need to push out some new default printer settings (mono and duplex) for 300 printers across about 12 x 2003/2008 print servers.  All of these devices are already mapped by around 2500 WinXP/7 users, so reconnecting the devices for everybody is not
    an option, nor is redeploying via GPO.  I've read the following thread, which appears to explain what I need to do:
    http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/a0a9bb3f-db24-417d-9905-c310d068d3c6/ 
    Firstly, I need the latest version of setprinter.exe, as the one I've got is date stamped April 2003, which I assume is the one that fails to work with devmode 9.  Does anybody know where I can get this from?
    Secondly, I think it says that the clients will periodically update themselves with the server's default settings.  This is perfect, if correct.  However, would anybody please be able to explain when these periodic updates take place?
    Many thanks in advance !
    Andy

    Hi,
    There is a tool named "setprinter.exe" tool in the Windows Server 2003 Resource Kit.
    Windows Server 2003 Resource Kit can be downloaded from the link below:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=9D467A69-57FF-4AE7-96EE-B18C4790CFFD&displaylang=en
    As far as I know, there is no Windows Server 2008 Resource Kit for download, some of the MS Press have some books include Windows® Server 2008 Security Resource Kit
     http://www.microsoft.com/learning/en/us/book.aspx?ID=11841&locale=en-us
    Windows Server® 2008 Resource Kit (bundle)
    http://www.microsoft.com/learning/en/us/book.aspx?ID=10345&locale=en-us
    You may find ll the entire RESOURCE KIT on CD attached with the book.
    Windows Server 2008 R2
    ==================
    No resource kit Tools & Support tools are available for 2008R2...everything is on the OS already
    Secondly, I think it says that the clients will periodically update themselves with the server's default settings.
    >> Do you mean group policy refresh? By default, computer Group Policy is updated in the background every 90 minutes, with a random offset of 0 to 30 minutes. In addition to background updates, Group Policy for the computer is always updated when the
    system starts.
    Hope this helps!
    Best Regards
    Elytis Cheng
    Elytis Cheng
    TechNet Community Support

  • Scheduling comparision in Gantt Chart- Project planning board

    Hi All,
    I Need to use the "Scheduling comparision" in Project planning board gantt chart. This is to compare the original status of activities before and after scheduling.
    But the "Scheduling comparision" button in the PPB does'nt seem to work.
    ( I am selecting the activity and then pressing the button for"display original status" )
    How do I use this functionality?
    Thanks in advance.

    Hi Potluri Srinivas ,
    After some tests, I still donot get, how does this functionalties work either.
    I assume, it is linked with the setting in 'option' -> 'planning board' -> 'diagramm area' -> 'orginal schedule'.  But I donot know, how the two things linked directly.
    If you find it out, please post it.
    Thanks and  regards,
    Zhenbo

  • Activity bar not displaying on Project planning board

    Dear All,
    I am getting one problem related to project planning board. I am working on a system in which when i am trying to run  project planning board, its coming but in that gant chart i am not able to see bar for activity. Bar for project definition and wbs coming properly. In tabular form also i can see the activities. But the only problem i am not able to see bar for activity with relationships. I have check almost all configuration related to project planning board profile and also scheduling proflies.
    Kindly suggest what can be the reason for the same.
    Regards
    Abhishek Sinha

    Hi Abdul,
    Thanks for reply. I have check all these options but all things are in place. OPT7 setting also right there. Kindly suggest what other setting can affect. In the planning board i can see the activity at left hand side corner with details but in gantt chart where we see bar chart for schdulines there activties are not coming.
    Kindly suggest.
    Regards
    Abhishek Sinha

Maybe you are looking for