Activity bar not displaying on Project planning board

Dear All,
I am getting one problem related to project planning board. I am working on a system in which when i am trying to run project planning board, its coming but in that gant chart i am not able to see bar for activity. Bar for project definition and wbs coming properly. In tabular form also i can see the activities. But the only problem i am not able to see bar for activity with relationships. I have check almost all configuration related to project planning board profile and also scheduling proflies.
Kindly suggest what can be the reason for the same.
Regards
Abhishek Sinha

Hi Abdul,
Thanks for reply. I have check all these options but all things are in place. OPT7 setting also right there. Kindly suggest what other setting can affect. In the planning board i can see the activity at left hand side corner with details but in gantt chart where we see bar chart for schdulines there activties are not coming.
Kindly suggest.
Regards
Abhishek Sinha

Similar Messages

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Scheduling comparision in Gantt Chart- Project planning board

Hi All,
I Need to use the "Scheduling comparision" in Project planning board gantt chart. This is to compare the original status of activities before and after scheduling.
But the "Scheduling comparision" button in the PPB does'nt seem to work.
( I am selecting the activity and then pressing the button for"display original status" )
How do I use this functionality?
Thanks in advance.

Hi Potluri Srinivas ,
After some tests, I still donot get, how does this functionalties work either.
I assume, it is linked with the setting in 'option' -> 'planning board' -> 'diagramm area' -> 'orginal schedule'. But I donot know, how the two things linked directly.
If you find it out, please post it.
Thanks and regards,
Zhenbo

Project planning board report to microsoft project report

hi all
good morning
i want to convert the project planning board report to Microsoft project and primavera report ...
please guide me through the steps......
Thanks in advance
Surya

Hi,
OpenPS for Microsoft project (OpenPS4MSP) is an Add-on to SAP R/3 Project System which enables users to transfer project related data between Microsoft Project and R/3 Project System.
Refer SAP Note: 579761 for OpenPS.
Then to integrate SAP and Primavera , you can use various integration tools available. One of them is Primavera Inspire.
Refer :
http://www.oracle.com/applications/primavera/primavera-inspire-for-sap.html
Regards,
Amit

Network Header at the Project Planning Board gantt chart

Hi again,
Does anyone knows a configuration to allow the network header to appear in the project planning board gantt chart?
Tks
James

Try transaction OPT7
Double click on the appropriate Profile
On the Table Area Tab, select the flag for the field "Display Network"
Hope this helps
Regards
Steve

PreE V8: Clips not displaying in project view

I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?

I have been shooting in XP+ mode and have been for the past year.
I haven't tried using the Premier Elements Get Media function. I usually import both still images from one camera and the video from this camera at the same time into the same Photoshop album and use Organizer. Also there are some training videos and books that tell you to use Organizer.
I tried importing a video file using the Get Media function and was able to use the set in/out points and have them saved correctly.
Then in the project that I am working on I took one of video files that I imported through the Organizer and deleted it from the catalog. Then I imported it using the Get Media function and put it in the album with the other files. Then I used Preview to set in/out points. Those points were saved correctly.
So know I will delete all the remaining video files from the catalog that I haven't yet used in my project and then remote them through Premiere's Get Media.
So it appears that as you thought, I need to use Get Media to import video files. But that is not emphasized in any documentation. I think there should be a warning when importing video files in Organizer saying that if you intend to use Premier Elements to edit them that they should be imported via that product.
Thank you for your assistance.

Default print settings in the Project Planning Board CJ02N CJ2C

Hello
When you print the Project Planning Board CJ02N/CJ2C - there is an option to change the page setup.
I would like to change the default settings for left,right, top and bottom margins for all users.
Can anyone suggest where this would be done ?
Thankyou
Ros

Hi Varun,
Thanks for the fast repply!
Please see below the CJ2C and CNE5 screen shots:
Thanks and Regards
James

Viewing CO versions in project planning board

Hello,
I have saved two CO versions of my project. When i go to the project planning board the approved plan column is full of data and looks great but the other version as no information. I have SAPALL so this isn't an authorization issue. Can someone please help me work out was is wrong?
Thanks a lot
Jason

Hi,
Basically there are possibilities of creating Plan version.
1) one you can create in CJ40 by manually feeding the Version ex:0,1,2 etc....
2) create one version in CJ40 and copy the same to another version in CJ9BS.
once the versions are created make the changes of values in the respective versionand save the changes.
Please check the version comparission in S_ALR_87013539 - Project Version Comparison: Plan.
Comming to plan board which fields did you picked up for comparission?
Rgds
Sudhir Reddy

Unicode in Project Planning Board Screen (CJ20N)

Hi,
I'm facing a problem of unicode as follows:
I inputed some unicode (Vietnamese) at Project Structure screen, It is ok. but when I switch to Project Planning Board screen, It don't work. I also cannot input Vietnamese with unicode at this view.
Text example: "Các công tác chuẫn bị"
Please help!
Thanks
Long

Hi,
Found something on Service.sap.com
Thought would be useful..
To access this page you need a login id for service.sap.com
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000557148&
thanks..

Project Planning Board - Customising

Hello All,
Do we have an option to customize project planning board.
If yes where exactly in SPRO can we do this, and does anyone have any documentation on what all can be configured in project planning board.
Points assured.
Thanks in advance.
Warm Regards,
Jatinder Bansal

Project planning board customization is available at IMG. path IMG>PS>Structures>Project Planning Board.
Planning Board is based on Gannt chart. the customization includes, Define Time Profiles, Define profiles for time scales , Define scale for the time axis, Define Profiles for the Project Planning Board, Maintain Report Assignment from the Planning Board & Capacity Leveling/Capacity Evaluations.
Regards
Murali

Small Font for Date in Project Planning Board

Hello Friends?
Iam Using ECC 6.0 C Version in our Company. iam facing a problem in <b>CJ2B</b> that Date is displaying in very small font. i could n't solve that problem till date. Can any body help me where can we make settings for making fonts size bigger for <b>dates</b> other than zooming in Planning Board.
Appreciable for ur kind information.
Thanks.

Hi Hari,
Once you are into CJ2B, Please follow the following steps:
1. Click on the icon " Planning board Assistant"
2. Select the gantt Chart----Misc. in diagram Area
3. In the Selection of the "Text" of "Date Descript."--- Select "Dates one-line " ( This is applicable if your date is on the left or right side of the date bar)
4. Now you can change the Font colour, Font and Font Size, Bold or Italic.....
5. To Confirm the setting Click on "Update graphics" button on the screen.
6. Now, If you notice, the dates fonts will be as per your requirement.
If this does'nt work.. Try to explore in this area only..Probably try selecting other "Text" in the "date Descript."
Hope this helps.
Warm regards,
Srinivas Potluri

Activity Monitor not displaying processes or anything...

Hey guys,
My Activity Monitor (10.5.1) is not displaying ANY processes, in any of the tabs (system, CPU, etc.). I don't know why- I have a 2.16Ghz 24" iMac (previous iteration).
I did just add a 2gb stick of RAM (booted fine- everything BAR this monitor app is running perfectly). It has 3gb RAM total (previously had 2x1GB sticks). OSX System Profile displays it as 3GB and reads it properly.
Does anyone know why this is playing up, or what I can do? I have AppleCare so I'll call them tomorrow, but thought I'd see if anybody else incurred this problem.
Thanks!
Kendal.
Message was edited by: kendals

Is the little menu on the upper left set to "All processes"?

On windows 7 only, ie9 and firefox 4 spry bar not displaying correctly?

This website www.colonialstock.com does not display the spry menubar correctly. I need it to go all the way to the right. But when I do a view on IE8 or do the compatibility view on IE9 (which is the same as IE8) it brings the bar too far, making it fall below where it is. I need it to work on both browsers. The same is on firefox 4 and earlier versions. I am guessing this is just a windows 7 issue in all. Also on firefox when i hover on this tab issuer services> annual meeting & proxy the sub sub menu appears farther down than it should it works fine on all ie8/9 versions. Please let me know if you have any solutions.

See here http://forums.adobe.com/message/4002145#4002145
Gramps

Menu bar not displaying in Internet Explorer 8

I recently created the webpage http://sterlingfamilyfarm.com/index.html in Dreamweaver CC.
I tested the site with http://jigsaw.w3.org/css-validator/ and http://validator.w3.org/ and all seemed good.
But the menu bar is not displaying in IE8... it's displaying as a bulleted list instead.
Also the footer is not displaying properly (not centered, no background color).
Any help would be greatly appreciated.
Thank you!
Patrick

<header> and <footer> are html5 semantic tags. Old non-html5 browsers (like IE8) don't know how to handle them without a little help.
Add this code to your <head>

Or better yet, download the .js file and add it to your site, then link to it, that way you won't depend on third party servers keeping the file in the same location...
http://code.google.com/p/html5shiv/

Navigation Bar Not Displaying in Opera10

Hello again,
There seems to be an issue with the navigation container in my website, and it is not displaying at all in Opera10. It displays fine and visible in every other browser. I thought maybe Opera 10 requires some extra position settings, and the navigation bar is at the very top of the page behind the header. So I tried to put a z-index value on the container, to see whether or not it is behind the header, and in fact, I still could not see it.
My website has a header image at the very top of the browser, with a horizontal spry drop down menu right underneath it.
Does anybody have any ideas? I am not sure which details to provide with this question, however I can give any details upon request.
Thanks in advance a thousand times!
Cheers,
Mr.V

I have just read the "new to spry forums?" quick info, and I realized that I only have the version 1.4 framework. I will upgrade to 1.6.1 immediately, and the issue could be possibly resolved.
Sorry for the inconvenience. I will note the details from now on.
Mr.V

Activity bar not displaying on Project planning board

Similar Messages

Maybe you are looking for