Define access sequence for purchase order

Hi,
Please can I get some advice on how to create an access sequence in MM (in IMG = define access sequence for purchase order)
I have created a condition type for handling costs and want to assign a default value for each individual goods supplier.
So for plant 1000 and goods supplier 40, assign a rate of 3% to the condition. For plant 1000 and goods supplier 50, assign a rate of 7% etc etc
How do I go about doing this please
Thank you

hi,
Steps,
Customizing activities:
1) Create the condition table for vendor and plant field.
table no should be above 500 as its a customizing.
2) create access sequence and assign the condition table to this access sequence.And activate the fields in table.
3) create Z condition type and put this access sequence into the condition type.
End user activities:
4) maitain the condition record based on vendor and plant in MEK1 transaction
regards,
sujit

Similar Messages

Access Sequence for Purchase Orders

Hi,
When copying Access Sequence 0001 to my new Access Seq: ZPR1, I am hitting the below error.
The field assignment has not yet been made
Message no. VK 376
Diagnosis
Field assignment has not yet been carried out.
System Response
When using this access sequence, the system can never find a record for this access (sequential number 11 table 025)
Procedure
Branch to field level and make the field assignment.
Pls advise the cause.
Thanks,
Pri

well it shouldnt be an error message it should be a warning message
acknowledge the message and then selcet the row of the condition table in the acess sequnece and then click on the folder field s and do this for all the condition tables in the access sequence and then save
i will again say it is just an warning messgae so as to inform you that while including a new table u sholud select the row and then click on the field s folder this makes an interal assignement
do this and your problem will be solved 101%

Define Release Procedure for Purchase Orders

Hi Friends,
We are changing Release procedure for purchase orders for one department from > $ 5000 to > $ 10000.
We defined three characteristics for the class namely Purchasing Order Document, Purchasing Order Type and Ner Order Value which is Currency data type. I Defined Release Procedure for Purchase Orders in configuration master. It's working fine, I mean the Net order Value field is updated in Configuration Client.
After transporting the above change to the Testing Client, the Net Order Value field did not update in testing Client even though I created Characteristics in Testing Client (as characters are not transportable, I created them seperately in Testing Client). I can't update the Net Order Value manually in Testing Client as it says "Client 010 (test) has status 'not modifiable' "
Please tell me how to update that field, as the net order value didn't change even after transport. I can't change manually in testing Client as the status is "not modifiable"

Hi,
Yes I have already done that.
In SPRO,
After hitting the following:-
MM --> Purchasing --> Purchase Order --> Release Procedure for Purchase Orders --> Define Release procedre for Purchase Orders
I have to process the objects in the following sequence,
Release Group, Release Code, Release Indicator, Release Strategy & Workflow.
Upto Release Indicator it is fine. After hitting Release Strategy, I should select the release strategy (which I just created) and display. Then 4 buttons will be displayed namely,
Release Prerequisites, Release statuses, Classification, Release simulation.
Upto Release statuses it's fine. Afeter hitting Classification,
the values of Purchase document & Order type are populated, but the Total Net Order Value is Blank. It is supposed to populate the amount & 10,000. But it is not.
Actually that amount will be stored in the field GNETW of table CEKKO. But CEKKO is a Structure not a table. So I can't update the field.
Please advice me...
Thank You,
Nag

Define Message Types for Purchase Order.

Hi,
is it true that message type "NEU" doesn't require to fill
the smartform field in Processing Routines ?
Yours truly

If you are using the std form then you dont need smart form
std form is SAP script adn smartform is diff form then SAP script

Problem in using output type for purchase order

Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavt

In me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system)

Access Sequence for PO output

Hi experts,
I have defined new PO output type in NACE by copying existing one.
I have created New Condition Table for PO output (in SPRO).
Now, i want to create new access sequence. But, i am facing following problems
1. If i try to create new access sequence by copying existing one , i am not able to add Newly defined condition table.
2. if i try to create new access sequence without copying existing one , i am not able to enter access i.e. 10 ,20 , 30, 40 .... for access sequence.
Also , how to link this new access sequence to newly defined Condition table?
Please, guide me to resolve it
Regards,
rahul
Edited by: RahulNsk on May 9, 2009 9:34 AM

David,
I can't answer your question directly but I can propose an alternative:
If you are looking for another field to trigger output determination, you may want to consider having an ABAP developer create a custom requirement for that output type. Requirements can make simple validation checks and if it passes (sysubrc = 0) then the output is proposed, if not, then output is not proposed.
Create requirement @ Materials Management > Purchasing > Messages > Output Control > Maintain Requirements for Message Control
Assign requirement to output type @ Materials Management > Purchasing > Messages > Output Control > Message Determination Schemas > Define Message Schema for Purchase Order.
I hope this helps

Output Message Determination for Purchase Order

Hi all !
Can anybody please explain in brief, the procedure for Ouyput message determination for Purchase order. (including printer settings)
I have tried it throgh the Standard Configuration guide. but i am not able to do.
Please explain step by step including form attachment.
Thanks in Advance !!!!

Hi,
Customization steps for Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Note1
Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any but in SAP std is LP01) but consult with your basis consultant regarding above.
Check the following also:
Spool generated using SP01 or SP02.
Output device.
Local printer settings.
Paper Tray, Print Mode, Printer
Note2:
Check MN04 and NACE t.codes
Regards,
Biju K

Reg.Output type for purchase order

Dear Sir
I followed your steps but not come to "List of allowed output"
when I select the message for Purchase order(ME21N). There are listing NEU,SPO,MAHN and AUFB.
I just copy the NEU and all,I did not change anything.
Maintain Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> TES
Select TES and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select TES again and double click on Processing routines,
Select TES again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving output type TES.
Please help me sir
Rajj

Hi
Go to NACE
Select application as EF Purchase Order
Define TES as out put type there
Vishal...

HOT TO SET THE OUT PUT MESSAGE FOR PURCHASE ORDER

As i was saving the Purchase order in Me21n the error message that came up was " NO OUTPUT MESSAGE SET FOR THE PO " HOW DO I SET THE OUTPUT MESSAGE AND SET THE PO PRINT SETTING KINDLY HELP.

Hi
First of all Execute program RSNAST0F in SA38 .
Following are some steps for PO message printing
Maintain Output of Purchase Order
1. Condition Table
SPRO  Material Management-> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> ZNEU
Select ZNEU and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select ZNEU again and double click on Processing routines,
Select ZNEU again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
ZNEU -> ZNB
Now you create PO(ME21N) and maintain the text and save it. Go to ME22N and print the PO by giving output type ZNEU).
Vishal...

How to set print form for Purchase order in SPRO txn.

Hi,
I need to find out the name of the smartform used to print purchase order.
Cheers
Senthil

HI,
go to SPRO - MM - Purchasing - Messages - Output Control - Message Types - Define Message Types for Purchase Order
select the message tyoe and then click on processing routines and you will get the form name..
Thanks & Regards,
Kiran

Email Alert for Purchase Order Release

Hi,
When a PO is subject to release I would like an external email to be sent to the relevant user as per assignments in config.
I have used standard workflow for PO release and this is working with no problems, alerts successfully going to the workflow inbox.
But does anyone know the steps to configure the standard workflow so that an external email is sent?
Thanks

hi
WORKFLOW FOR PO RELEASE PROCEDURE
Steps involved are :
1) SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders > Release Codes > here assign Workflow indicator as "1" against each Release Code
2) SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders > Workflow > Here against each release code assign OT as US and respective User ID's for Release Codes.
3) Go to OOCU > here under MM, go to MM-PUR,
4) Click on "activate event linking"
5) Go for "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button. Activate "Event linkage activated" and also activate "Enable usage of event queue"
and Save.
6) Click on "Assign agents" and proceed all above steps.
BUS2012 is the relevant business object and Releasestep created is the event for the same.
7) Check SWETYPV transaction for the WF you have activated for BUS2012 and confirm.
Test the same by creating a PO and check the SBWP for SAP Mail of respective Users
regards
KI

Workflow for Purchase order

Hi,
Can anyone let me know the steps to activate workflow for purchase order so that workflow will be triggered after creation of PO and for any modification done after release.
What are the customization and tcodes required for PO workflow and is there any technical involvement requires.
Thanks in advance!
Karun

Hi
I took it from sdn.
WORKFLOW FOR PO RELEASE PROCEDURE
Steps involved are :
1) SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders > Release Codes > here assign Workflow indicator as "1" against each Release Code
2) SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders > Workflow > Here against each release code assign OT as US and respective User ID's for Release Codes.
3) Go to OOCU > here under MM, go to MM-PUR,
4) Click on "activate event linking"
5) Go for "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button. Activate "Event linkage activated" and also activate "Enable usage of event queue"
and Save.
6) Click on "Assign agents" and proceed all above steps.
BUS2012 is the relevant business object and Releasestep created is the event for the same.
7) Check SWETYPV transaction for the WF you have activated for BUS2012 and confirm.
Test the same by creating a PO and check the SBWP for SAP Mail of respective Users

Release Procudure for Purchase Order

Hi Experts,
I am new Release Procudure.My client wants release procedure for two users.
End user wants create Purchase Order then other user wants release that purchase order and then another user wants final release. Please tell how can map this process in sap.
Thanks in advance,
Chandhu
Edited by: chnadu9 on Jan 5, 2011 5:48 AM

Hi,
The release code is a two character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
An example of configuring a Purchase Order Release Strategy
If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
Steps for configuring the PO release strategy
Create the PO Characteristic
Transaction code : CT04 - Create Characteristic e.g. NETVALUE
Click Additional data tabstrips
Table name CEKKO Field name GNETW and press enter and you will see this information message :-
Format data taken from Data Dictionary (press enter)
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data tabsritps (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >=10000 (equal or greater than 10000) and press enter
Save your data
Create the Class of the PO Release Strategy
Transaction code : CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create button
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tabstrips, type NETVALUE to assign your characteristics to the class
Save your data and this message will appear :-
Class type 032: Class REL_PUR created
Define the Release Procedure
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Save your entries.
Release codes - New entries
Grp Code
02 01
Save your entries.
Release indicators - New entries
Release indicators Release Description
0 Blocked
1 X Release
Save your entries
Release Strategy - New entries
Release group 02
Rel.strategy 01 - Release
Release codes 01
Release status 0 - Blocked
1 - Release
Click the Release prerequisities button
Click the Relase statuses button the click the Continue button
Click the Classification button
Choose your check values
Click the Back button
Save your entries
Check your PO release configuration
Finally, check your PO Release Strategy configuration to make sure that there are no errors.
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Mohar

Access sequence for stock transfer order

Hi,
My client is a paper industry. client is procuring raw materials from forest center. We are considering forest center as plant 1800 and paper mill as plant 1100. several depots has been created under forest center and considering them as storage location. goods receipt at forest center is happening through scheduling agreements. stock is transfered from forest center depots to mill through stock transport order.
For each depots, freight value per MT is fixed for transporting goods from forest center to mill. Clients requirement is to maintain the rates for freight for each depots so that it will pick from condition records. No need to enter freight value in stock transport order.
I have created an access sequence for combination of plant (1800) and forest center depots and maintained condition table. but it is not working as in stock transport order, there is no storage location option for supplying plant. In stock transport order supplying plant is forest center (1800) and receiving plant is mill (1100).
Please guide me where to maintain the freight rate as this is mandatory for my client.
Thanks
Prasant

Access seq with depot will not work becuse you don't have the storage location field in the header
Rather create the diff pruchase group for each depot and assign them in STO based on your depot(storage location)
and create the access sequence based on the palnt and purchase group than it will work.

Define new document type for purchase order

Hello
I want to create a new document type for purchase ordre with also new number range.
And within my conditions, the shopping card will be generate either document type ECPO with number range 44 or document type ZOS with number range 33.
The document type is still a purchase order.
Is it possible to do that? To assign new document type for purcharse order?
If yes, is there any Badi to put my conditions of generation of my document type?
Thank you for your help.
Regards,
Peggy

Hi Markus
Thank you four your response. Unfortuntly, i do not want to create a new transaction type.
It is still a purchase order which could be visibled in standard transaction. The behaviour is still like standard PO, and could be visible in standard transaction PO.
I just want to create 2 types of purchases orders to identify them, so create a new number range and so a new document type for purchase order..
I have a condition to do "the shopping card will be created in this document type, and this schopping card will be created in this document type".
But standard document type is ECPO, and I don't really know if it is possible to create new document type for purchase order...
Peggy.

Define access sequence for purchase order

Similar Messages

Maybe you are looking for