Deleted delivery and inspection lot tracking

dear all,
i have an issue please guide me
the senario is
At my client , there is a delivery happening in vl01n i will pick the required quanity and send the lot to the QM for final doc audit then after the QC is passed it will released from the QM then i will do the Post Goods Issue .
the problem is here in the client    i have created a delivery document and i have picked the quantity and issued for the final doc audit report , during that time the goods which have been picked will be in the Scheduled for delivery .
Now if the quality check fails for( final doc auidit ( ie for pallletization ) or some nails and packing is not done properaly ) it has to go for rework for the final doc auidit .
If the quantity is rejected and gone for rework.    i will have to delete the delivery document and create a fresh delivery doccument .
because only if i delete the delivery document what ever the quanity is there in the Scheduled for delivery will be moved backed to the Bonded store .
and then only it is possible for the goods to be picked and send for QC and after QC pass PGI will be done
My problem is is there any connection can be done from the deleted delivery document and the fresh delivery document
so that
i can able to track the inspection lot generated in the both the deliveries   i.e ( the deleted one and the fresh delivery document for which the PGI is done )
Based on this i can create a zreport for the QCheck , becasue the client wants to have a link between the inspection lots generated between the two delivery documents and based on that they wanted to track the inspection lot

Hi
regarding the link between two delivery documents , as you are deleting the delivery the delivery document is not there in any table so you wont get the link even in the document flow table. or delivery table .
So its not feasible to generate link.
I would suggest a different approach ,pl investigate more before you go ahead,
You can have seperate storage locations one with internal QC ,Other FG store and third final dispatch or BSR store.
When material is transferred from production to quallity store a inspection lot is generated .once it is cleared QM will have stocks in FG store .Materials in FG store should be availble for final audit and only material which is approved in all respects in transferred to BSR store from where it is immediately dispatched. so QM and other departments can always access the stock in QM for internal inspection , rework an dfinal dispatch through store location instead of delivery tracking.
I hope this helps
regards
Mandar

Similar Messages

Reverse a Return Delivery with inspection lot posted (QM)

Hello experts,
I want to reverse with transaction VL09 a good movement of a return client delivery with inspection lot. I posted the inspection lot and transferred the material to Unrestricted use (transaction QA11).
Then I began the cancel Return Process and I transferred the material to Quality (movement type 322) to run VL09 with material in Quality stock, but the system displays the following error message:
You cannot cancel GR, since inspection lot is already partly posted
Message no. QA046
Diagnosis
You are attempting to reverse a goods receipt although quantity postings have already been made from the inspection lot. This means that stock for the goods receipt has already been transferred and, for this reason, a cancelation of the document is no longer possible.
Procedure
Ensure that the postings in QM (within the usage decision transactions) are carried out.
Please let me know what can I do to reverse the return delivery.
Thanks in advance.
Pablo

You are trying to do the process which you ahve already transferred through Transaction QA11.
The role of Cancel return Process has already been done by this transaction as the Stock has already been into Un- restricted.
Best Regards,
Ankur

Linkage between delivery and inspection.

Hi ,
We have a requirment to print the inspection comments from the inspection screen in the invoice output. I was unable to find the link between the delivery to inspection.
I need to know the link between the delivery and the inspection in SAP SD.
Thanks,
Kannan Mohan

The material should have been extended for Quality Management view and after saving delivery, an inspection lot will be created which can be seen and cleared via QA32. Here you can see the DA reference.
G. Lakshmipathi

Connection between batch and inspection lot number

Hi all,
our GR in SAP triggers the creation of a batch number and an inspection lot number.
If I only know the batch number, where in SAP can I find the related inspection lot number?
Thanks
Anne

we have a Material Master that represents a semi-finished material that requires inspection at Goods Receipt from Production. In order to see the settings maintained for this material, click on the Insp. setup button:
More details
http://searchsap.techtarget.com/searchSAP/downloads/UsingDigitalSignaturesEMconvtSearchSAP.pdf
Kevin

Relationship b/w Operation No. (VORNR) and Inspection Lot No. (PRUEFLOS)

i want to get multiple operation numbers (vornr) in against of inspection number (prueflos).
i have already linked both tables i.e (vornr from table plpo and prueflos from table qals). The statement is as follows :
SELECT single vornr FROM plpo
WHERE plnnr = itab-plnnr
and werks = itab-werk
AND steus = 'QM01'.
i am getting same operation number i.e "25" with all records but at back-end they are different i.e (For QM: 25, 35, 45 etc).
Regards..
Shahzad Sami

I have executed the view but i m not getting the desired results. Let me explain you the scenario again...
We have inspection lot no. i.e field "prueflos". (For Example : 30000000260) from table "qals".
Under this inspection no, we have multiple defects i.e Text field "kurztext" from table "qpct".
For Example :
1.Leakage A (Engine).
2.Dent B (Body).
When we record 'n' number of defects which lies under the single inspection lot no then there are 'n' number of operation number's that are associated with defects under the single inspection lot no..
My question is how could i join both tables that have defects and there associated operation numbers ????

QM and Inspection Lot

Hello Gurus,
I am doing a QM setting. I need to create a few characteristics to test when an Inspection lot is created after a GR, I need to make a Usage decision (UD).
I am able to maintain QM views and make GR which is giving me inspection-lot no. I am perfect till there.
But I would want to see the inspection characteristics for that inspection lot and record values for the characteristic and be able to make a UD.
Can someone tell me what I am missing in master data maintenanc.
Regards
SS

Hi Shankar,
You are missing Inspection plan. To created inspection plan follow the steps,
- Run trx QP01. Enter Material & Plant.
- Enter the Header Details, (Note: in the header details there is a filed "Inspection Points" if you are not going with the typical sampling calculations then simply enter "FREE Inspection Point")
- Then In the "Operation Overview screen", assign the QM Work Center, name the operation logically.
- Select the Operation line item and click on the Characteristic Overview screen. Here you need to assign all the desired characteristic you wish to record result for.
- Save
Now
- Run trx QA02, enter the Inspection lot number.
- In the Inspection specification screen, Assign the Task list (Inspection plan, we just have created).
- Save
- The status of the Lot must become "REL", if the lot status will not be REL, it wont allow to perform RR or UD
- Then perform RR (Trx QE51n, QA32 etc) and UD trx QA11
Regards,
Shyamal

Quality Notification and Inspection Lots

Hello everyone:
Does anyone have an SAP environment in which the quality notifications are generated automatically followed by inspection lot creation? In these instances please explain how you manage to assign the quality notifications to the related inspection lots.
I am working on a project to create quality notifications at the time of receipt into quality inspection stock then inspection lot creation/results recording and subsequent automatic closure of quality notifications.
Appreciate your feedback.
Thank you.

Genrally it's not the way it operates, but I can understand the way business forces their requirements on SAP team. The way you have given the requirements, it can done but everything has to be done through development. I never come across this type of requirement but you can check the following stuff.
1. As per SAP, once the material is received (any case Ware houes managed/ or simple IM) based on the master data set up system creates inspection lot and put the quality into stock. So, If you want to create q -note prior to inspection lot creation either it should be manual or independant of goods receipt. I suggest, find a user exit which fires at the time of GR (just before insp.lot gets created) and create the q-note based on the information from the p.o. There standard sap BAPI's available, so no complex developmen is required. Just need to find the correct user exit and timing of creating q-notes. What minmum required fields for your q-note? Do you want any defects info to be passed on to q-note from the data you maintain in MIC? You need see all these things before you go with creating prior q-note.
2. The biggest challenge will be mtaching the q-notes created in advance to the defects/out of spec. recorded during result.recording. Again if you have a smart developer, I think it is possible. Find out the user exit/ or any BADI which can be used when the results are out of spec., turn on standard settings of SAP to create a defect record but while q-note is generated(standard sap functionality) for defect - force your logic to find out the corresponding q-note which was already created and update it with defect info. You can explore passing p.o/item number as refe. no to q-note when it was created and same can be used in add. to your Material/plant/serial no if required.
I am sure, it's a challenging one and not the normal way we do in sap, but you have to go for it if business insists. In general its not the way I have seen, may be other experts might have come across.
Hope it helps.
Thanks,
Ram

Sales order and Inspection Lot relation

Hi All,
How can we find relation between Inspection lot and its coresponding sales order?
Thanks and Regards
Nazmul

Hi Nazmul,
you can find the can we find relation between Inspection lot and its corresponding sales order with the help of QA32 Inspection lot list
Give inputs like : material / Plant / inspection lot origin and all where we can find out inspection lot number
i hope it will helpful for you
Thanks

Vbeln and inspection lot .

hi friends ,
can i get the VBELN and PRUEFLOS (inspection lot which is in some qualty inspection) in one same table.
thanks .
Bhupi.

Hi Bhupi,
Try table AFKO. It has fields RMANR and PRUEFLOS.
Regards,
Aparna Gaikwad

Movement types and inspection lot origin??

Hello Friends
I can have a look in Movement type & can find it's inspection lot origin but i want to know for particular inspection lot origin what all movement types are assigned?
Regards
Prashant Gupta

Hi;
The most truely answer is,
till 4.5B, active table is: T156S
beginning from 4.6A, active table is: T156SY
for stock related transactions, it's decided in fm: MB_CONTROL_MOVETYPE_GET
beginning of row 151.
There is also an enhancement.

Other iTunes accounts have downloaded their music to my iPad. I have deleted them and have ghost tracks/data?

My Dad and a couple others bought music on my iPad using their iTunes accounts. I have deleted the albums as I don't want them anymore. They don't not show on the iPad, but when I plug it into iTunes and look at what "What's on my iPad" it has the albums and songs bought, but they are greyed out. I delete them, and then when I plug my iPad in again and they re-appear. This is doing my head in, I don't know how to stop it. Someone please help! https://www.dropbox.com/s/06ufu5jp0xptrbl/image.jpg

One can't guarantee anything, but it should resolve the issues. I recently had to take the same approach on my iPhone 4S because the artwork become all jumbled up. Deleting and adding back the media wouldn't do it. If a straight backup then restore doesn't work, restore as a new device, then restore the backup you took. There is a further method called DFU restore which can be used if other approaches fail. You need to have all the apps and media that should be going onto the device in your library, then backup the current state of the device, and immediately restore it. This will give you a snapshot of the current state of the device which can be used again if the initial restore fails, or doesn't completely fix things.
tt2

Problem with deleted delivery and cancellation invoice

I have a problem. I have to resolve a cancellation invoice with error saying Missing Export Data. However, when i try to update this invoice, the fields to be updated are all shaded out meaning they cannot be changed. now the problem is, the delivery where the cancellation invoice retrieves its data shows a status of Archived. but when we tried to find it, it seems that it has already been deleted though the status shows Archived. I do not know how they have managed to delete this delivery with the Goods Issue still active, even with the Invoices. All I know is that the user who has deleted the delivery has made a mistake for this.
Can anybody please help me?

Can you please check the OSS note 908748. It may be of some help to you. The contents are pasted here.
Symptom
A cancellation document cannot be transferred to accounting because the system has issued error message VF 072:
'Document 90001234 has been saved (foreign trade data incomplete)'.
However, the underlying business process concerns domestic business and the invoice to be cancelled does not contain any foreign trade data.
Other terms
VF02, VF11, VF072, cancellation, EXNUM, incompleteness, export data
Reason and Prerequisites
Prerequisites:
This is a partial cancellation document.
When you create the cancellation document, you inadvertently branch to the foreign trade data and choose 'Set'.
Reason:
When you choose 'Set' in the foreign trade data, the system assigns an export number, which then results in an incomplete document because the other export data is missing.
Solution
Implement the attached correction.
There is no provision to take account of a cancellation scenario in which foreign trade data can be entered or changed.
This correction deactivates the ready for input status of the 'Set' button in order to prevent the system from inadvertently assigning an export number.
In this context, refer also to Note 354222.

Customer return inspection lot

Hi,
Actually I got an problem in customer return quality scenario , when i do an PGR there are two inspection lot is created one is with reference to material document number and another is with delivery and sales order number .
Please tell me why the two inspection lot is generating
( Note :- i am not able to activate inspection type 06 because our client want to inspection lot stock tab in usages decision, so i activated inspection type 05 , and inspection lot stock tab is came in lot refer to material document not in lot of delivery and sales order number )
Please explain briefly if it is fine, or correction required
Regards
Maashish

Dear Maashish
I got the issue
1) Please let me know what is the movement type you are using
2) The reason why 2 lots are created is this
a) One inspeciton lot is created because of movement type - which is actualy giving you the inspection stock posting tab
b) Another one is getting created based on the assignement of inspecion type in delivery type in the config
Please remove the inspection type for the delivery type and then do the test
This will clear the issue
Regards
Gajesh

Add Inspection chaterstics to recipee After Inspection Lot Creation

In recipe I didnu2019t Enter Inspection Characteristics and inspection lot is created. Now I enter inspection Characteristics in Recipe with inspection points .Now I want to Attached Inspection Characteristics to Created Inspection lot. ?Is there any way to Attached Recipe characteristics after Creating inspection lot.?

Hii,
Option 1:
It is possible to attach MIc to craeted Inspection lot using Unplanned Inspection characteristics. First Create MIC with complete copy model, then atach same MIC in Results recording : characteristics overview screen of Inspection lot.
Option 2:
Check whther the relavant Inspection lot Process order is partially confirmed and delivery made. If not, then u can make changes in Master receipe and the same can get reflected in the same Inspection lot. After chages in Receipe goto cor2-->master data -->slect relevant Pv's.
Else, If Process order is confirmed and delivery made , u cannot chage the inspection lot, then go with option 1 solutuon.
with regards,
K.Lokesh.

Transfer of Results from IDOC to Inspection Lot

Hello experts,
Following scenario:
Inbound IDOC (QCERT) from vendor with inspection results is supposed to populate the inspection lot, which is being created at GR for PO.
QM in procurement is active and QM control key and ceritificate type populated in material master record. We also activated workflow, which is supposed to execute the transfer from IDOC to the inspection lot automatically as soon as inspection lot gets status CROK.
This works only under certain circumstances in the following order:
1. Inbound IDOC received
2. Q-certificate created automatically from IDOC with intial status "2 - Certificate received"
2. GR posting for PO
3. Manual setting of status "5 - Certificate filed and inspected"
4. Inspection lots receives status CROK and the results are being transferred to the inspection lot
This is okay as a start, but not ideal. We would like to have the following behaviour:
1. Automatic setting of status "CROK" for inspection lot in order to transfer the results as soon as certificate and inspection lot are available.
2. If the IDOC is being received after GR for PO, there is no connection in the Q-certificate to the inspection lot, i.e. the transfer of results will never take place, but it should.
Can anybody help and knows, if this is feasible in SAP standard?
Many thanks!
Martin

With IDOC Type Quality01 there is no reference to inspection lot, but in IDOC type Quality02 there is
a inspection lot reference in segment E1EDLIN-E1CCI01, you will have to find out the logic to auto
populate the lot # , please consult developer if its possible
Thanks
DD

Deleted delivery and inspection lot tracking

Similar Messages

Maybe you are looking for