DELL WIRELESS 5560 HSPA + Mobile broadband Mini-Card - Win 8

Good morning everyone.
I have a big problem with ultrabook "YOUR 3460."
I updated the S.O. Windows 8, but the "DELL WIRELESS 5560 HSPA + Mobile Broadband Mini-Card" does not work.
On the website of DELL, I found a type of driver, but installing it in the device manager, does NOT recognize the card. How do I proceed? Can someone help me, please? Tomorrow I need to connect mobile ...
Thank you.

Hi Fabio79,
Please check in BIOS if the WWAN card is detected in BIOS or not. Also, is the wireless driver (network controller) listed in device manager under 'Network Adapters' or 'Other Devices'?
Turn off the computer, restart it and press F2 key as soon as the Dell logo appears.
Navigate to 'Advanced' screen, select 'Miscellaneous Devices' and press Enter.
Check if 'Internal WWAN' is enabled. Navigate to Exit screen and select 'Exit Saving Changes'. Once done, download the drivers from this link: http://dell.to/XEzTO0.
Hope this helps.
Keep me posted with the status.

Similar Messages

Windows 7 not recognizing device - Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card

Windows 7 is not recognizing my Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card (Qualcomm Gobi 2000). I can't even uninstall the driver, it says that I don't have "sufficient permission" to stop device or something to that effect
(though I'm an administrator). I also can't re-install the same or different driver. I might have installed the wrong driver, though this is supposed to be the correct one according to Dell after typing in my service tag. I went to the FTP
to get one specifically for "Verizon Wireless", but I can't uninstall the prior driver.
How can I fix these issues? Thanks.

Hi,
Any update?
Have you tried safe mode mentioned in the first reply? What is the status of the driver in device manager? For "Verizon Wireless", have you installed any verizon software or related verizon device? Uninstall this kind software, then uninstll driver again
as a test.
Contact this support, maybe they can give some different ideas.
Verizon Wireless Support
http://www.verizonwireless.com/support/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

ThinkPad W530 Mobile Broadband Mini Card

Hi all.
I've recently buyed a ThinkPad W530 (Lenovo Model Number: N1K4JIX).
Tecnical sheet and distributor sheet say that in this model there is an "3G Open SIM" WWAN card. In fact, i've under the battery the slot for insert my 3G Telephon VODAFONE SIM.
The problem is that i not can see nothing (software or hardware switch) that can control 3G Broadband connection.
I update the notebook at Win8, with shipped Lenovo CD, i try to install ERICHSON drivers but this give me error (it's impossible initialize device).
Now, my intret is in first how i know if i really have an Mobile Broadband Mini Card installed and not only the SIM slot and, after iìm sure of this, how can i enable and use 3G connection with my laptop?
Thank very much at all,
regards,
Mauro.

Don't hold me to it but the Wan Miniport 2 I don't actually think is the Ericsson card
If the drivers aren't installed it would display under other devices if it was included in your system
A lot of W530 systems to my knowledge don't come with the WWAN installed, it is WWAN Upgradeable and has a Sim slot and the antennae cables already there, mine was like this and I had to remove the keyboard and install the WWAN card (cost : £100ish)
DangerMouse
Current Machines : T420s/W530/X1CT

WRT330N and DELL 1505 Draft 802.11n WLAN Mini-Card Rev 2.0

Well it was time to upgrade the house with two new DELL Inspiron 530s.
Each with their own "DELL 1505 Draft 802.11n WLAN Mini-Card Rev 2.0"
Now the (problem) we are having is we are lucky to get 13.0 Mbps & that's if we stay online. Our World of Warcraft gets booted a lot. Which makes gaming hard when I purchased the WRT330N for gaming.
We have the latest drivers for the Wirelss adapters, Firmware is up to date.
Setup is as follows.
Wireless Setting:
Network: Wirelss-N Mixed
Wireless Name (SSID): My own thing there
Radio Band: Wide - 40 MHz channel
Wide Channel: 9
Standard Channel: 2.462 GHz - cH 11
SSID Broadcast: Disabled
Advanced Wireless Setting:
Trasmission Rate: Auto
CTS Protection Mode: Disabled
Beacon Period: 50
DTIM Interval: 3
Fragmentation Threshold: 2346
RTS Threshhold: 2347
Network Density: Low
Wireless Security: Disabled. We currently use Wireless MAC Address Filtering.
Any suggestions?

I am having the same issues. I have the same router but a different laptop. Mine is a Inspiron 1545 with an Intel 5100 AGN card. So the solution is to ditch the Linksys router and get a D-Link? what say you Linksys

Dell Wireless 5540 HSPA on Latitude E7440

I bought and installed Dell Wireless 5540 HSPA modem on Latitude E7440. I can not find suitable driver. These cause Authorization Error:
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=R283078
http://www.dell.com/support/home/nl/nl/nlbsdt1/Drivers/DriversDetails?driverId=VXPJ8&fileId=2935061607
Error message:
I have found driver packages for other devices (unsuitable for me) that (beside setup) include also raw driver files (.inf) that can be used directly from Device Manager. Is there such package for 5540?
Thank you!

Hello,
I don't think there is a raw .inf file for that driver, but you could check our ftp site to see whether one might have been uploaded there. It's possible one is stored there but not released to the public via our Dell Support Pages.
Try: ftp://ftp.us.dell.com/
Good luck.
Todd

Ideapad u350 model 2963 - mobile broadband sim card

hi,
i've got a u350 model 2963, intel core solo 1.4 ghz, 4gb , 320 hd etc. and was wondering if if the sim card slot under the battery will work or not , have tried a few 3g broadband sim cards ( not phone sim cards) and nothing . Also had a look in the memory/HD compartment and it seems there are 2 mini pci slots with one being taken by the intel wifi card and i empty - i would have expected to see a 3g card in the 2nd one , there are wires for the ariel connection??
Can only assume this model doesn't come with one built in ? any ideas anyone ?
Cheers
Steve.

Don't hold me to it but the Wan Miniport 2 I don't actually think is the Ericsson card
If the drivers aren't installed it would display under other devices if it was included in your system
A lot of W530 systems to my knowledge don't come with the WWAN installed, it is WWAN Upgradeable and has a Sim slot and the antennae cables already there, mine was like this and I had to remove the keyboard and install the WWAN card (cost : £100ish)
DangerMouse
Current Machines : T420s/W530/X1CT

Unknown Device (Mini Card) Win 7 on T61p

Just installed Win7 (64 bit) on my T61p & all seems to be well - except that I get reported a missing driver for a "mini card" - code 28. Anyone know what this might be - & better yet, where I might find a driver for it?
thanks!

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73611
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

I upgraded to mountain lion. Now my virgin mobile broadband internet card will not work

I uninstalled the broadband software and then tried to reistall it but it will not work. I pluged in my usb card but it doesn't show that it is pluged in. I tried the card on my girlfriends computer and it works. I pluged a camera in my usb port and that works. Can anyone help me out.
Thanks

My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

Previous Post Possible Incorrect (Mini Card + router)

I posted earlier but have found conflicting info. so here goes the new info.
I have the DELL 5520 Cingular Mobile Broadband Mini-Card (3gHDSPA).
I am looking for a router that will connect using that. I do not have an external DSL modem. Only the internal card. I want to connect two computers and the printer.
I have a wireless g router and printserver. I couldn't connect because it was asking for me to connect the DSL modem to the router. More specs. I run laptop on Vista Home Premium 32bit.

You can try for Wireless G router with T mobile Card ....
WRT54G-TM

HP OfficeJet 8500 and Mobile Broadband

Has anyone used OfficeJet Wireless 8500 and Mobile Broadband? If so, what router did you use or would recommend. Small Office, less than 15 feet in any direction. Could not get a simple G router to work. Thanks!

Did a help desk ever ask you to check specific UDP or TCPIP ports in your firewall to ensure HP communication paths?
They are not usually open in XPSP3 or W7SP1 even after you load the drivers or web mail. In the updates they even state you must connect to update the device using USB even if you have LAN wired share with a static IP.
I have three W7 devices (OEM W7, refurbished W7 with updates from WXP (32 bit) and single license W7 on 64 bit hardware) and each of those have had rejections and failures on trying to load the print drivers and the solution center (version 14.0).

WRT160Nv2 won't connect with Dell Wireless 1515 half-mini card

I just received a new Dell Studio 14z that has a Dell Wireless 1515 half-mini 802.11N card. After messing around with it several times, I am still unable to get it to connect wirelessly to my WRT160Nv2 router. Whenever I try to connect to the network, I get the following error from Windows Vista:
Wireless association failed because WIndows did not receive any response from the wireless router or access point.
I do use MAC Address filtering on the router, but I've added all 3 MAC address the system has (1 for wired, 1 for wireless, 1 for bluetooth). I've also checked the WEP security key MANY times and am sure it is entered correctly. I have also tried updating to the latest firmeware, 2.0.0.3 build 7. Nothing seems to help at all.
I don't know what else to look at to determine the cause of the problem. Does anyone have any suggestions about what the problem might be?
Thank You

Did you reset the router after upgrading the router's firmware...If not then,Press and hold the reset button for 30 seconds.Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
For the wireless computer you need the Mac Address of the wireless Adapter while enabling MAC Address filtering on the router.

User having trouble connecting to VPN using mobile broadband card

I've got a user with a laptop running Windows 7 who is trying to use an AT&T mobile broadband card to connect to a VPN using the Cisco IPSec VPN client. The card is the Sierra Wireless Momentum 4G. The VPN connection established fine, but no traffic gets passed after that. Other users can connect to the VPN fine (not using mobile broadband, though). Wired and wireless connections from this laptop are able to get to the VPN fine. It's just over the mobile broadband service that this happens. Are there any workarounds for this issue?

Hi and Welcome to the Community!
To use the proprietary BB services (including Push email capability, native browser, BBM, etc.), you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), your BB-proprietary services will function (e.g., you will have Personal/Internet Email added to the email setup wizard, your BBM will function, etc).
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
With hundreds of carriers in the world, each with dozens of different data plans, it's impossible to tell you specifically what any service plan might actually provide. Only the carriers can answer that question. The best thing to do is to decide what services you desire, and then talk to your carrier about obtaining (from them) a data plan that enables what you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WLC 5508 : WPA2 enabled SSID - especially Intel & Dell wireless cards are not getting connected

Hi ,
I have one pecular issue in my wireless lan set-up. I have some laptop users who are using below inbuilt wireless adapter/cards :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1 ) Dell wireless 1397 WLAN Minicard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
2 ) Intel Centrino Advanced N6200 AGN
above card are having issue with WPA2 enabled ssid connecitivity. strange is , the same users are getting connected to other wep enabled SSID but its not working for WPA2 SSID.
I have external ACS server which is used for radius authentication. Last time I had put same query in support forum did some workaround.
eq. disabling DHCP proxy option in WLC and moving all DHCP scope in external server.
After doing this workaround this mentioned users are still facing issue. I gone through some cisco document and some forums and came across that there is something to be done in " Session Timed Out " optionin WLC
which is default 1800 sec based on that I tried to capture debug outputs for mentioned above problematic clients and user who is working fine .
I gone through the same debug output and observed :
User who is working fine :
Processing Access-Accept for mobile 00:22:5f:8d:55:84
00:xx:xx:xx:xx:xx Setting re-auth timeout to 1800 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:8d:55:84 setting dot1x reauth timeout = 1800
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:8d:55:84 (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:1f:ca:2c:f3:01 to PMKID cache for station 00:22:5f:8d:55:84
New PMKID: (16)
The User / card which is having issue :
Processing Access-Accept for mobile 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Setting re-auth timeout to 0 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:90:a2:ac setting dot1x reauth timeout = 0
00:xx:xx:xx:xx:xx Stopping reauth timeout for 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:90:a2:ac (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:26:cb:1d:fe:31 to PMKID cache for station 00:22:5f:90:a2:ac
New PMKID: (16)
Please suggest me to do workaround.

Hi,
According to output of working as well as not working wireless cards ,
below is my observations :
Not working wireless cards observation :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client passed the L2 authentication and that, after successful association, it is now going into the DHCP_REQD state
Not-working wirelss card :
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 Stopping retransmission timer for mobile 0c:60:76:3e:8c:49
*Apr 06 11:58:15.869: 0c:60:76:3e:8c:49 10.10.232.137 Added NPU entry of type 1, dtlFlags 0x0
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.137 but after that , I am getting below output
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:ea:e0
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy WLAN LOCP EssIndex:2 aid:50 ssid:USTRI_SECURE
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Username LOCP :   U25744
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy IP LOCP: 0xa0ae889
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy CCX LOCP 4
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy MobilityData LOCP status:1, anchorip:0x0
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 Clearing Address 10.10.232.137 on mobile
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMmProcessDeleteMobile (apf_mm.c:522) Expiring Mobile!
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 0c:60:76:3e:8c:49 on AP 00:1f:ca:2c:ea:e0 from Associated to Disassociated.
working cards ouput :
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 10.10.232.190 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 Stopping retransmission timer for mobile 00:22:5f:8d:55:84
*Apr 06 12:16:28.042: 00:22:5f:8d:55:84 10.10.232.190 Added NPU entry of type 1, dtlFlags 0x0
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.190 and as expected , I am getting below output
*Apr 06 12:16:28.749: 00:22:5f:8d:55:84 DHCP received op BOOTREQUEST (1) (len 321, port 29, encap 0xec03)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP processing DHCP REQUEST (3)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   xid: 0x6eefbbb8 (1861204920), secs: 0, flags: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   chaddr: 00:22:5f:8d:55:84
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   ciaddr: 10.10.232.190, yiaddr: 0.0.0.0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*Apr 06 12:16:28.753: 00:22:5f:8d:55:84 DHCP successfully bridged packet to DS
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:f3:0
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy WLAN LOCP EssIndex:2 aid:10 ssid:USTRI_SECURE
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy Username LOCP : USTR\U17967
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy IP LOCP: 0xa0ae8be
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy CCX LOCP 4
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy MobilityData LOCP status:1, anchorip:0x0
Finally client is getting stuck with DHCP-REQD state ..................
Please look into this and put light on this ............

Samsung N150 Verizon mini + adding Virgin mobile broadband 3g USB

I got the Verizon mini notebook 2 days ago and am having a heck of a time connecting my Virgin mobile broadband 3g USB adapter. I disabled the laptop network card and I followed Virgin's directions and still no internet access. I cannot get a hold of Virgins customer service. Is this thing even possible? Thanks, Mark

Go to Verizon or T-Mobile sites and check their coverage maps
for 4G. If it is not available, you have what you have.

U450P worldwide broadband mini pci card

Anyone know of a card 3g mini pci card compatible with UMTS/HSDPA worldwide? The card supplied on Lenovo's site is AT&T branded. The U450P comes with a slot for such a card (or an ssd drive) . Will appreciate any pointers however new the series may be. Thanks!

Calle99 wrote:
I have installed the "ThinkPad Mobile Broadband" card (P/N: 0A36186 in my Thinkpad T400 (6474).
Lenovo P/N: 0A36186 card is an Ericsson F5521gw, and is intended for use in a ?x20 model ThinkPads (X220, T420, T520 etc) and is not specified as suitable for T400 models.
You need a Lenovo Ericsson F3507g card for a T400.
Cheers,
Bill
I don't work for Lenovo

DELL WIRELESS 5560 HSPA + Mobile broadband Mini-Card - Win 8

Similar Messages

Maybe you are looking for