DESADV is not generated during Goods issue from VT02N.

Hello,
DESADV is generating during goods issue from VL02N.
But DESADV is not generated during Goods issue from VT02N.
Any idea what was missing?
I maintained the variant of RV56ABST for Delivery message with output type LAVA and Medium 6 (EDI).
Thanks,
Venkat

I got reply from SAP. It is as follows:
Please goto tcode VL10CUC. For Profile 2000, please check whether
indicator "No OutputDet." is flagged.
Please unflag that indicator and then retest.
Please read note 1410599 for more inforamtion.
Thanks,
Venkat.

Similar Messages

  • Storage Location from USERTEMP1 not picked during Goods Issue

    Hi All,
    We had populated the USERTEMP field in FMDERIVE with the Storage Location using the steps mentioned in the following thread
    Fund Center not getting populated through FMDERIVE
    The problem is that during a Goods Issue made from MIGO, this particular field is not getting picked up in the USERTEMP (trace was set up in FMDERIVE, which showed that the USERTEMP is empty).
    But in the case of PR/PO and other purchases, the USERTEMP is getting derived properly with the storage location.
    Why is that the USERTEMP behaves differently for a Goods Purchase and a Goods Issue ?
    Requesting help from the experts on this issue,
    Thanks,
    Wy.

    Hi Eli,
    We replicated the development we did for procurement (copying from storage location into USERTEMP) by finding out the enhancement point and the code worked fine here.
    One important thing to note is that the buffer need to be cleared everytime, before a value is entered here - the USERTEMP field is static otherwise.
    Thanks for your inputs,
    Wy

  • No Accounting document generated during Goods Issue

    Hi All,
    In MTO, when posting Goods Issue during an outbound delivery, no accounting document is generated.
    However, the documents get generated during the billing cycle.
    In MTS, however, accounting document is generated while posting Goods Issue.
    Plz advice.
    Anu

    A few things you could verify.
    Check your SD and FI integration.
    Check the amount of the goods issued.
    Check the pricing conditions as well.

  • Batch determination not working during goods issue in MIGO screen

    Hi,
    We have configured search strategy according to shelf life expiration while doing the goods issue with movement type 201, 351 etc. Now when I do goods issue in MB1A for movement type 201 or in MB1B for movement type 351, by entering the * and clicking enter, system proposes the batch nos of the material according to the shelf life expiration. But when I do same procedure in MIGO screen, while entering * in batch field system does not propose the batch nos., instead it gives error as "use of special characters are not allowed"
    How the above problem can be resolved?
    Thanks in advance,
    Satish

    Thanks Aroop & Jurgen
    I have done the settings as per your suggestions by maintaining the Stock Determination Group. However It picks the batches as per FIFO and not as per shelf life expiration. Also same is the case with MB1A or MB1B.
    The reason I wish to use MIGO instead of MB1A or MB1B is as follows
    Suppose STO is made of say 10 line items (all Batch managed items). Now while issuing the goods, say for the seventh item there is no stock available then I can not bypass this item (it asks for enter the batch no. even though I change the quantity to zero) and I have to abort the complete transaction. But in case of MIGO I can bypass this item by unchecking the item OK check box.
    Any inputs on the above will be helpful.
    Thanks,
    Satish

  • Automatic batch determination during goods issue

    Hi,
    We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction.  Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
    Thanks & Regards,
    N. Laxman

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Error during goods issue-Posting period not open

    Hi ,
    I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
    Thanks,
    Hari.

    Hi,
    Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
    So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
    Hope it helps. Please reward if useful.
    Thanks & Regards
    Sadhu Kishore

  • Good issue from delivery not possible due to credit block

    Hi gurus,
    Please help me on this issue.while doing PGI for the delivery i am getting the following error message."Good issue from delivery not possible due to credit block "The simple credit check is assigned for the sales document type.iam doing free of charge delivery.
    What are all the possible ways to get such error
    Regards
    Vis

    but system behavior is not set in transaction OVA8, means combination of risk categories and 03 is not set.
    I think you are checking the wrong risk category, please check once again the Risk category of the payer in FD32, what is it assigned and also check OVA8 with this risk category.
    If you find the above settings are correct as per your observation, try to create a fresh cycle so that you will get the correct results as per your settings in delivery.
    In your case what you are saying is correct, may be the risk category is changed recently this you can check the change log of the payer customer in FD32( if any change takes place).
    If possible try to past the screen shot of both.
    thanks,
    srinu.

  • Goods Issue from ECP with Batch Management

    Hi experts,
    I would like to make a Goods Issue from Execution Services in Easy Cost Planning. But the material has Batch Management active and I am not able to inform the batch.
    I know I can make the same movement from MB1B but I would like to do it from the Easy Cost Planning environment.
    Is it possible?
    Thanks

    mforman wrote:
    We already have the batch and deactivating batch management has no sense.
    > We need to be able to inform the batch when we are making the goods issue from the Execution Services.
    Dear,
    I think you can solve this through your Characteristics in the Costing Model. In the Characteristic Edit Screen, Goto Values tab, Select your material and click on Object Dependecies Button, see if you can use or create a new Dependency for your material for picking or suggesting batch number.
    Hope this helps...
    Thanks,
    Ranganatha. Patnala
    Edited by: Ranganatha Rao.P on Oct 14, 2011 2:59 PM

  • Need to capture Vendor code & Service Order no during Goods Issue

    We have a typical req of tracking Goods issued to contractors to whom Service Orders ( Labour jobs ) is awarded. Even though contract is pure labour type , we intend to track materials issued against work orders.Std transaction of Goods issue to Purchase order can not be done here as materials are already lying in stocks but when issue to Contractor who is working in our premises , we need to track Goods issue against Work Order no in SAP as well as Vendor code , If these things get captured , we will customise the report.
    Umesh Bagul

    Hi,
    You can make Goods issue from MIGO with Movement Type-261.
    Capture the details as follows
    MIGO -> Goods Issue > Other > 261
    Maintain Work Order Number in Material Slip
    And the maintain Vendor code in Partner Details ,you can find this tab under Item detail field.Field name -Vendor Code
    THen there is no need to make seprate Z report.
    You can find all these details through MB51.
    Regards,
    Sandesh Sawant

  • Auto populate of vendor in partner Tab during Goods issue- Batch management

    Dear All,
    I there a possibility of populating the Vendor (in partner tab) during goods issue (MVT 601,201, 240 etc).
    Provided the material is batch managed.
    Thanks and Best Regards
    W.Raghuram

    What I feel is that u have to maintain the Batch Characteristics then it is quite possible.
    In std In Partner tab I feel not possible. Not sure other expert may guide you.
    Biswajit

  • MPN Manufacturer batch determination during goods issue

    I am from pharma industry and my business runs with batch management, MPN features.
    Scenario:
    I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
    But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
    For P2 material we can use R1 batch from manufacturer M2 only.
    For P3 material we can use R1 batch from manufacturer M1 and M2.
    Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
    Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
    Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
    Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
    As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
    But, here we can't maintain any parent child relationship.
    Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
    Through any standard settings we can do or, any exits required?
    Gurus please suggest!

    Dear
    You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
    here you can sort the batches and compare the Batch results with the batch search strategy.
    Regards,
    R.Brahmankar

  • Batch determination based on fifo during goods issue

    Hi All,
    My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
    I have activated batch wise split valuation.
    I have maintained  characterstics with MCH1 table and HSDAT.
    Assigned to class and class is assigned to stratergy type.
    Created sort sequence and sort rule ascennding.
    Assigned this to stratergy type.
    Maintained condition record also.
    During goods issue to production system is not proposing the batch based on gr date.
    System is not stopping me while making goods issue with other batch.
    Please guide to fix the above issue.
    Regards,
    Venkatesh

    Split valuation has nothing to do with this problem.
    I hope you do not just require the sequence for physical goods issue  to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
    IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
    here you set the box for batch check active, which means if a batch is entered manually  then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.

  • About goods issue from vendor consignment stock

    Hi, I meet some issue needs your help!
    The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
    stock for this delivery base on the actual process?
    thanks
    Best Regards,
    Rory

    Hi
    In R3 it is not possible
    If say material X is 100 units lies in your premises the vendor  consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
    To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
    But the same scenario is possible in IS retail
    For this iS retail server is reqd
    In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
    You can search SAP library regarding the settings of the same
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
    Regards
    Raja

  • CS service order budget can't control goods issue from stock?

    Hi experts,
    I set budget to a service order(CS), it can control Purchase order from service order, however it can't control the good issue from stock(type "L") !  Is it the setting problem? how to deal with it?
    best regards
    lance

    1st
    If you actually bothered to read my post, you would see that I decided to change for the X220 after I saw it in the flesh and realised how much close it was to the X121s dimensions. If lenovo wishes this not to happen very often, they should bother do something about the fact that there is no Lenovo dealership/agent/representative in Oxford.
    2nd.
    If Lenovo lists paypal as payment method, they should honour it. Otherwise, do not list it at all.
    3rd.
    If lenovo says that I can cancel the day I ordered with no implication, they should also honour this. Not ignore my e-mails (contrary to the terms & conditions stated) and ship it so I can perhaps keep it. That's not good business practice. That's playing dumb.
    They had 5 days to cancel, they prefered to wait for the item to be produced/stocked so that they can ship it to a small hamlet in Oxfordshire (half the way around the globe) so I can send it back. So yeah, this little laptop will circumvent the Earth.
    If this is not wasteful, then what is?
    As far as I am concerned, it took me 10 telephone calls and to DR just to get the cancellation e-mail which should be sent immediately.
    If you do not value your time, it is your problem, not mine.
    I will not be buying a Mac either as I do not like the product, but the difference in service couldn't be more stark.
    All the best,
    Sav.

  • Inspection lot not generated after goods reciept?

    Dear SAPIENTS,
    Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
    Regards,
    Kaushal Rai

    Hi Kaushal,
    For Inspection lot from GR, 01 Inspection type is enough.
    - Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
    - Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
    Regards,
    Keerthi.

Maybe you are looking for