Determine BOP change in status

Hi experts,
We need to determine when BOP finishes and change its status to 'Update ended(X)'. We have to trigger an event when the status change to 'X'. Do you know any user-exit for this?
Thanks a lot.
Regards,
Nene

Hi,
We are trying to implement the same, and at the moment tought of developing a custom program , which retrieves the BOP status from table /SAPAPO/BOPHEAD and if status is 'X' we are raising an event which triggers next step of my job.
If BOP sttaus is 'U' check for TQA count, if TQA count is Zero check for RFC queues......if any failed queues...giving that error message and continuing next job.
We are not using any user exits.
Hope this gives atleast an idea. Share with us , if you find any best approach.
Regards,
Deepthi

Similar Messages

Changing the status of Equipment in a follow up action

Hi All,
           I have a requirement in which a function module will be triggered for a particular Follow up action.
In this FM we have to determine the equipment and the Maintenance Order , if both are available , status of the equipment
should change to 'A' , status of maintenance - order = 'Technically completed' and Maintenance Notification = 'Notification Completed' .
How can this be done.? I am able to change the status of Maintenance order and notification but can anyone help me in
determining the equipment and changing its status to 'A'. ?
Thanks in advance.
Vasuki

Hi Gajesh,
                 The process is as follows :
1) During Calibration of a product,depending on the technician's User decision , 3 follow up actions are created.
2) Each follow up action has one FM associated with it, which is customised in      SPRO > Display IMG > Quality Management > Quality Inspection > Inspection Lot Completion > Define follow-Up Action .
3) In the first case ( first Follow up action when the inspection is successful) the first FM is triggered. In this FM we have to perform the following steps :
                               a) Determine the Maintenance Order and the equipment.
                               b) Incase both are available, status of equipmnt should be changed to 'A',
                                   Maintenance Order should be changed to 'Technically completed' and
                                   Maintenance Notification to 'Notification Completed' .
If you need further info pls let me know.
Thanks,
Vasuki

Change the status profile assigned to the line item from PROFA TO PROFB

Hi Experts,
The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
Item Category A -> Status Profile PROFA
Item Category B -> Status Profile PROFB
For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B. However the status profile still remains PROFA.
We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
any quick inputs from any one please......
Thanks in advance
hemanth

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Contract determination on change of Price List Type on Pricing Tab for item

I need to to re-trigger the Contract determination for a document item when the price list is changed. Currently the only BADI i can see this working with is the pricing Badi. The only issue is that I get a linking error when going from no assignment and then changing it so that the item then has a reference to an item on the contract

Dear All,
I have fulfilled this by doing rev acct determination in vkoa using item category and moving it up the order. Also I used a requirement in v/08 for 100% discount on free material.
This has resolved my issue and i am now closing this thread.
Thanks and Regards,
Rohan
Edited by: Lakshmipathi on Apr 2, 2011 10:53 AM
Since you have arrived at a solution, please change the status of the thread to "Answered"

VF02 how to change Posting status on header tab

how can i change posting status in vf02. I have changed billing date from last month to current month. On the header tab there is posting block ( it its greayed out righ now ) - Error in Accounting interface. How can i remove that ?
Vanbills.

Hi,
1. Check Your Customer master xd02 - Sales area Data - Billing tab - Account Assighment group of Customer
2. Cechk your Material master mm02 - Sales Org2 - Account assighment group of Material
3. Check you Biling document vf02 - Header - header - Accounting data - Account Assighment group (Customer)
Item - Item detail - Accounting - Account Assighment group (Material)
4. Check Account determination -VKOA - Proper G/L Account maintained or not if not then try to correct them
5. After correcting all the above steps Goto Vf02 enter Billing doc. No. then click on Realse to Accounting or Press Shift + F4
Regards,
MH,

Back dated action which is changing the status ' inactive'

hi friends,
my requirement is as below :
i want to insert back dated action which is changing the status as inactive ( currently he is active) .
System is not accepting to insert it and giving the message "   future action exists,check the status"
So for that first i am deleting all future actions and inserting the current action(which is changing status) and after inserting back all the deleted actions.
But the problem is as per the latest records in IT0000 it is showing currently the employee is in 'active' status(as we have inserted back the deleted records).
But i want to make him into 'inactive' status after the current action( which is changing status as inactive) is inserted.
This is my urgent requirement . an anybody respond to this immeadately.
waiting for ur reply.
thanks in advance.

Hi Gajesh,
                 The process is as follows :
1) During Calibration of a product,depending on the technician's User decision , 3 follow up actions are created.
2) Each follow up action has one FM associated with it, which is customised in      SPRO > Display IMG > Quality Management > Quality Inspection > Inspection Lot Completion > Define follow-Up Action .
3) In the first case ( first Follow up action when the inspection is successful) the first FM is triggered. In this FM we have to perform the following steps :
                               a) Determine the Maintenance Order and the equipment.
                               b) Incase both are available, status of equipmnt should be changed to 'A',
                                   Maintenance Order should be changed to 'Technically completed' and
                                   Maintenance Notification to 'Notification Completed' .
If you need further info pls let me know.
Thanks,
Vasuki

Picking status in Out. delivery changed to status A after GR post with MB0A

Hi,
I am facing an issue in our production system, these is the scenario:
- Replenishment delivery
- ZPicking confirmation idoc sucessfully picked the outbound delivery and post the GI. The material was cut and it was batch splitted.
- Then it was performed a GR (mov 101) against a stock transfer order via MB0A.
- After this GR posted, the status of picking of the parent material of the batch split was changed from status " " (Not relevant) to status "A" (Not yet processed).
- Also the status at header level was changed.
Current status of the delivery
Header Status
Picking Confirmation --> B
Total Gds mvt status --> B
Item Status
Item 10:
Pick confirmation --> A
Goods movt --> B
We have tried to reverse the GI to generate it again and reset the statuses but it is not possible to do it via VL09 neither MBST, etc.
Any idea on how to correct this problem?
Thanks,

Hi,
What is the moment type being taken for PGI through idoc?check the moment type definition for its allowable transactions and foe reverse.
Regards,

Usage decision follow up action change of status in equipment

Hello every one, I am having calibration scenerio in my project. All process is running properly but the issue which i am having is that when i am giving usage decision i should get a pop up to change the status of the equipment which is not coming in my case. i have checked followup action whch PM_QM there i have activated 2 Funtion modules one is for automatic TECO of order which is working properly and second is change to status in equipment master which is not working for me. Kindly give some guidance to me on same.
Regards
Abhishek

Helloo,
Please let me know the equipment type you are using.
If you are using equipment type other than Q then u may get such type of issues.
Please try out with equipmetn type Q or P
Thanks

Change of Status is not working in WebUI

Hello All,
Iam facing a problem in changing the status of the item in web UI requirement as follows.
We need to set the item status from the To be Closed to Close.The status To be closed is set by an contract processor and schedules the Action .i.e Close item Once the contract approver execuets the action.It need to be change to Closed and the item end date need to be set to the date when the Action is execueted
I have done my coding in the Execute method for the action Close item by using the FM CRM_ORDER_MAINTAIN
to change the item enddate and CRM_STATUS_CHANGE_EXTERN to change the Status to Closed and the Commit Work .My code is working fine in GUI but this is not working in WebUI . I can only see it when i execute the action go to the edit mode.
Can any one help me out in this regards.
Thanks in Advance.
Regards,
Kiran Posanapalli.
Edited by: posanapalli kiran on Feb 15, 2010 7:16 PM

Hi Kiran,
we're having the same issue that an opportunity is updated in the normal Gui but not in the WebUI when using FM CRM_ORDER_MAINTAIN.
What coding did you use for fixing this?
Kind regards,
Roy Willems

Regading function module to change User Status IN CJ02

Hi All,
I need to chage System status from Budget Assigned(BDAS) to Release. Can any body help me is there any FM to change this status.Tell me ASAP
Thanks,
Sagar.

Hi,
BAPI_BUS2001_SET_STATUS: For Project Defn, WBS
BAPI_BUS2002_SET_STATUS: For Networks
Regards

Change Checkbox status at runtime

Hi,
I've got a question about checkboxes.
How do I change the status of a checkbox from unchecked to checked (or vice versa) at runtime?
How can I access it's values to say something like this:
if (cond1 = true) then
checkbox1 = 'CHECKED'
else
checkbox1 = 'UNCHECKED'
pls help me.
Thanks!

Hello,
Take a look at this thread -
Re: reference checkbox.checked value in javascript
If you're using a fairly recent version of Apex you can use the $x and $v syntax rather than html_GetElement, like this -
if ($x('item').checked == false) {
alert("The checkbox is not checked!");
}Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com

Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

Hi
Using SPD i am creating list workflow.
Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
Please help me for automatic process.
What i should do to change the status to "Complete" automatically after manager approval
Regards
Jhanani
Janani.R

Hi Janani,
From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
we should be able to see the Approval task’s status.
Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Is it possible to change the status from Bid Rejected to Bid submitted?

Hi there.
We are working in SRM 4.0.
One user rejected a bid, but it was a mistake. Is it possible to change the status from Bid Rejected to Bid submitted?
We would like to modify the status from Bid Rejected to Bid submitted or Awaiting Approval to Bid submitted in order to solve errors.
Thanks and regards.
Raúl Moncada.

Hi ,
Use Function Module : BBP_PD_BID_STATUS_CHANGE
Supply Activity = 'QOSU' .
Regards,
Sachin S M

Error in CV02N while changing the status.

Hi Experts,
We are getting a error while changing the status of technical change document that " Inconsistent characteristic value assignment" .The document is in status "in use" and we are trying to change it to " old version" using T code CV02N.
when I tried to see the error desription it is telling that delete the inconsistencies. But I didn't find the list of incosistencies. What may be the problem? Please help me out to get ride of this problem.
Thanks and best regards,
Praveen

Hi Pete,
The full text message: Inconsistent characteristic value assignment
Message no. C1821
In diagnosis it is telling that "You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed."
Actually I am just changing the status of the document. I am not changing any characteristic value.
Actually it is appearing as information message. but while saving it pop up and not allowing to save.
Please do the needful.
Best Regards,
Praveen

RE: Mail notification on changing the status of the spport desk messages

Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
Sowmya

Hi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

Determine BOP change in status

Similar Messages

Maybe you are looking for