Distribution of Revenues

Hi All
My scenario is like this :
My FI line item of Receivables in Billing Document is picking up dummy profit center.I have corrected it as per configuration so that receivables line item should pick correct Profit center.Now,my requirement is to transfer the accumulated amount of dummy profit center to correct profit center.
I would like to know if i can use Distribution Cycle for it ?Also, if my Receiver rule in Segment Header is Variable Portion or Fixed Percentage.
What will be the scenario if i use fixed percentage for distributing receivables?
As in case of Variable portion,my selection criteria is cost element of revenue type(11).
Please guide.
Thanks In Advance
Payal Saxena

hi,
you can create a distribution cycle using the tcode 4KE1
now the question as to u want to distribute it percentage wise or variable proportion wise is purely the clients decision.  but let me tell u one thing if u r going for variable proportion wise then you would be needing to create statistical key figures under the tcode KK01.
you can run the distribution cycle through  4KE5
let me know if u face any problem wid this
regrds
sayeed
Edited by: sayeed bakhressa on Jun 6, 2009 9:34 AM

Similar Messages

  • Automatic events for COST/EVENT distribution rule

    Hi,
    We are using 11.5.10 in our organization and we are using the following distribution rules
    a) WORK/WORK
    b) WORK/EVENT
    c) EVENT/EVENT
    d) COST/EVENT
    The COST/EVENT projects generates automatic event and that too these events are passed in functional currency.
    a) Is there a way we can stop these automatic generation of events?
    b) If not, is there a way we can make the system to generate events in Project Currency?
    Thanks
    ARS

    Hi
    By standard functionality system will not allow you to update the distribution rule of an active project. Here are three ideas to overcome the issue. Note those are not solutions that Oracle will give you, so be sure to test them carefully before implementing on real system.
    Please note the COST formula is calculating: ITD actual costs/total Approved Cost Budget X Total approved Revenue Budget. The billing extension called COST has as setup the name of the budget types for revenue and costs. It is possible to update the names of the budget types on the billing extension setup form. You might try setting a special budget types names which you designated only for that calculation. Enter budget cost and revenue values that will force the system to always get a zero result, so it will not create any new automatic event from that billing extension.
    Another option is to go on and modify the SQL code of the billing extension COST (some times named COST_TO_COST). By modifying the code you prevent it from generating new events.
    Another option is to update the distribution rule (Revenue Method) of the individual projects from COST to EVENT or WORK. Such update cannot be done from the front end, but you could easily do it by direct update on the database table.
    Dina

  • Wrong booking

    Hi All,
    Here a problem related to SD-FI.
    A Billing document generates wrong booking. Instead of account 'X' ( just example), the booking is happening in some other account "Y'.
    This account assignment is should done by FI team right?
    Where to do these and how to solve this wrong booking?
    Thanks,
    Swetha

    Hi Shwetha Thimmappa ,
    IMG (Implementation Guide) à Financial Accounting à General Ledger Accounting à Business Transaction à Integration à Sales & Distribution à Prepare Revenue Account Determination.
    T.code VKOA
    There u change account from x to y
    Regards
    Surya

  • Steps of Struts JSF integration

    Can some one send me a simple example of Struts with JSF
    plz don'nt send the struts-faces example becz i already have that and it has some problem with weblogic8.1[Expression language limitation JSP2.0]
    Regds
    Amit Verma

    Hi ...
    Application (key for the Sales and Distribution application), Account determination type, Chart of accounts (from the FI System), Customer account assignment group, Materials account assignment group, Account key
    The allocated accounts are used to post revenues, surcharges and discounts automatically.
    You have defined the access sequences and the account determination types for Sales and Distribution.
    You must define charts of accounts and G/L accounts in the FI System.
    Activities
    1. Check to what extent you can use the allocations contained in the
    SAP standard version.
    2. Allocate the G/L accounts for each access sequence.
    Path
    IMG (Implementation Guide) --> Financial Accounting -->General Ledger Accounting --> Business Transaction -->Integration --> Sales & Distribution --> Prepare Revenue Account Determination.
    Transaction Code VKOA
    1. Customer Account Assignment Groups:
    Domestic Customers, Foreign Customers and Affiliated Companies. I think they are finalized.
    2. Material Account Assignment Groups :
    3. Trading Goods and performances.
    They are not exhaustive and they need revision.
    Finished Goods & Semi Finished Goods are covered under Trading Goods. Performances are said to be Nil. Shall we have Material Groups as Trading, Finished, Packaging and Services.
    3 Condition Types : KOFI & KOFK ( Account Assignment for CO)
    4 Account Keys
    ERL Sales
    RDM Rounding
    ERS Sales Deductions
    ERF Freight Collected Domestic & Foreign
    EIN Transit Insurance Collected
    EXD Excise Duty
    ERB Rebate Sales Deductions
    ERV Rebate Accruals
    EVV Cash Clearing
    MW3 Sales Tax
    MWS Tax on sales & purchases
    This is for FI-SD,

  • Is it possible to change the distributions on an Unearned Revenue line?

    We have a product who's accounting segment was updated after an order was placed. This item is a class product so revenue is not recognized until Day 1 of the class. The original Unearned Revenue line is incorrect and I believe it is causing problems updating the revenue line. When I try to fix the Unearned Rev line, multiple Unearned Rev lines are created. How do I fix this line?

    We are getting an error: FRM-40654: Record has been updated. Requery block to see change. We get this when trying to correct the distribution account on the revenue line. It's only on about 15 transactions where we have this issue. We are unable to locate any trailing spaces.
    Additionally, the order lines for these transactions are not progressing to CLOSED. They are stuck at FULFILLED. Not sure how to fix this problem.

  • Cost / work project revenue distribution

    Hi
    I am looking at cost / work project revenue distribution results and I see that GDR created 2 lines in the revenue: one for expenditure and one for the event. I know that event was created from billing extension. The expenditure line has 0 distribution. The accrued_revenue and accrual_rate columns are set to 0. I cannot find where and how this 0 lines gets created. Is this seeded logic for cost / work type projects? Your help on this greatly appreciated.
    thank you in advance
    Ed
    Edited by: user_Ed_123 on Mar 11, 2012 2:48 PM

    Hi
    any help is appreciated.
    thanks!

  • Update AR Invoice - Distribution Account - Class Revenue

    Hi,
    I want to update AR Invoice - Distribution Account - Class Revenue. The transaction is completed but not posted into GL. From front-end I can do it easily, but I have 1000 + transactions.
    Is there any API available to update AR Invoices Distribution Accounts?
    Thanks
    Waqas Hassan

    Hi,
    There is no update API available. I have uploaded AR Invoices and all that invoices are complete. But our Financial Consultant send me the request to change to Distribution Account.
    It can be, if I do the invoices to incomplete and then delete it.
    This could be the logic to re-create the invoices.
    Please guide me how could I do it incomplete?
    Thanks

  • The Revenue distribution account is not showing the updated value

    Hi dear
    I have updated the Revenue distribution Account for the Debit Memo transaction type in AR.
    But when i am entering a new DM transaction using Trasactions window, the Revenue Account is still showing the old value.
    Even i have created a new memo line with a new Revenue Account but still the old value is appearing.
    Can somebody help me plz?
    Thanks.
    Regards,
    Roshan

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Business Process - Sales Process through Distribution point but revenue booked to Manufacturing Profit Center

    Dear Expats
    Our company now planning to decentralized the sales by introducing Sales distribution Point.
    We have three manufacturing plant and every manufacturing plant are individual profit center.
    Material is same.
    Now company is planning to introducing sales distribution point.
    Goods transfer from three manufacturing plant to sales distribution point and sale from the distribution point.
    Now our requirement is - revenue will be booked to every manufacturing profit center.
    How can we process this business process.
    Note : We don't want to create separate material code - manufacturing plant wise.
    Regards
    Tarek H Chy

    Hi 
    I have the issue like..
    1.  For each line item of the sales order check, whether the profit center is filled or not, if it is not filled then determine the profit center and populate.
    2. If material of the line item is "sub component code" of a material that is "Offering component code", then compare the profit centers of line item with the profit center maintained for the material that is offering component code.  If the profit centers are different, replace the sales order line item profit center with the profit center of the offering component code material.
    3.  Above activities should happen when the sales order is saved.
    can somebody tell me which user exit ?? where coding can be dine.

  • Accounting Revenue distribution not copied when copying a bill

    Hello,
    I'm trying to copy bills (copy single bill functionality) in PS 9.0. When I do this it only copies my account and alternate account and no other values (e.g. affiliate, project, etc.)
    I'm sure I missed some set up but can't find which part.
    Can somebody help me with this?
    regards,
    Stijn

    Hi Stijn
    Assuming there are no customisations affecting the objects, I suggest you raise a service request with My Oracle Support.
    PeopleBooks reads "The system copies all bill information—including any discounts, surcharges, notes, and accounting distributions, but excluding bill status and invoice date—to the new bill. The system creates the new bill with a status of NEW, with a blank invoice date, and with a current date bill added".
    My experience is consistent with this information, so your situation is unusual and unexpected. I don't recall any specific setup or configuration that should affect this. I hope that helps.
    Regards
    Neil

  • Distribution based on revenues generated

    hi gurus,
    will somebody tell me how can i perform distribution of cost on other cost centers based on the sales generated in the respective cost centers.
    regards
    sayeed

    hi,
    thank you very much for the help.. but could you eplain it to me how am i suppose to maintain the SKF for the following example
    i have five cost centers
    A   B   C   D  E 
    i want to distribute the costs incurred in A which is  11000 $
    to be distributed among  B  C  D   E
    since in cost center  B has  a sale of  5000$
                                  C has a sale fo   4000$
                                  D has a sale of  6000
                                  E has a sale of  3000
    i want to distribute the cost in A  among the above cost centers in proportion of their sales...  how can i maintain an SKF for the above example
    regards
    sayeed

  • PSCD - Revenue distribution posting(FP60P) and mass scheduling(FPSCHEDULER)

    Has anyone used FPSCHEDULER to schedule FP60P?  SAP did not supply an event for copying the template variant and I'm wondering why?  Is there a trick to scheduling FP60P I'm missing?

    The answer to this question can be found in SAP note 1531171.

  • Revenue Recognition (AR Closed for future month in error)

    Need help with revenue recognition. In the month of June in AR July was opened in error, so it was put in to close pending. Since July was closed the last 3 days worth of June invoices did not have any revenue recognition for July. Instead July's revenue was posted in to August since August was showing as a future period, and July was closed. Is there any fix to change the revenue recognition without doing a credit and rebill of 3 days worth of invoicing? If we reopen June, and run revenue recognition again, will that help? Thanks in advance for any help.

    Well there are a few ways you can go ahead and fix this, but it depends on lot of factors.
    Lets say you have 1 invoice for which the revenue has been recognized in August and not July, now you can query up that invoice in the transaction's workbench and incomplete it. After incompleting all the revenue recognized distributions would be deleted(applicable 11.5.10 onwards) and when you complete the invoice again & run the RR program the revenue would be recognized in July(provided it's in an open status). Please note though that you can incomplete a transaction only if it doesn't have any activity against it!
    Now coming to the real world it's possible that the number of transaction's you have could be quite large and doing this manually through the screen might not be feasible. So you could possibly write a small pl/sql script to loop through those invoice's and incomplete them by calling the complete/incomplete group transaction's api. And then again complete them and re-run RR program to complete the fix.
    Please note though that you can incomplete a transaction only if it doesn't have any activity against it!
    With posted transaction's or transaction's having other activity, it's possible to fix them too but that would be taking things too far and Oracle Support/Development would be best equipped to provide you the fix in that scenario.
    HTH,
    Jasmeet.

  • Logical data base for license revenue report.

    Hi All,
    My requirement is to create "license revenue report through SAP Query with following fields:
    VBAK:
    Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
    VBAP:
    Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
    origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
    VEDA:
    contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
    VBREVK:
    clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
    VBREVE:
    revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
    Is there any  standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
    there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables  VBREVE and VBREVK with those logical data bases
    Please provide some valuable suggestions on this.
    Thanks&Regards

    Hi All,
    My requirement is to create "license revenue report through SAP Query with following fields:
    VBAK:
    Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
    VBAP:
    Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
    origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
    VEDA:
    contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
    VBREVK:
    clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
    VBREVE:
    revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
    Is there any  standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
    there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables  VBREVE and VBREVK with those logical data bases
    Please provide some valuable suggestions on this.
    Thanks&Regards

  • Distribution of Costs from CCA to CO-PA

    Hi All,
    Can someone please help me find a solution to the following scenario?
    There is a requirement to distribute costs from CCA to Cust/Prod level in CO-PA.
    *The cost allocations factors can only be provided at the Customer Group/Product level.
    *Using regular assessment cycles in CO-PA it is possible to distribute these costs to Customer Group/Product level.
    *However these costs are to be distributed further to the Customer/Product level in CO-PA based on the revenue value field.
    Any suggestions on how this can be done? Can I use top down distribution?
    Regards,
    KK

    Option 1:
    Step 1 - create assessment to COPA (KEU1). Ensure that you enter customer group and product in the receiver characteristics (second tab)
    Step 2- use top down distribution to distribute from customer group to customer.
    Please refer to SAP help on top down distribution to see how top-down distribution works if you want to retain 'product' characteristics. They have given examples.
    http://help.sap.com/saphelp_erp2004/helpdata/en/7a/4c48c64a0111d1894c0000e829fbbd/frameset.htm
    Second option:
    Step 1 - Carry out top down distribution of the cost allocation factors from customer group/product to customer/group.
    Step 2 - Create assessment cycles at customer/product level.
    Second option may be a better solution from data volume point of view beacsue top-down-distribution creates two records for sender and receiver in COPA. I am assuming that number of records for top down distribution of cost allocation factors will be less as compared to top down distribution of actual costs from multiple cost centers.
    Hope it helps.
    Regards,

Maybe you are looking for