Do we need to resolve all issues with intermediate 2010 migration before going to Exchange 2013?

We just migrated from Exchange 2003 to Exchange 2010 as an intermediate step to going to Exchange 2013. Everything is working through OWA, so all the data has been transferred. We have users that can access Outlook 2010 through a Citrix server,
and through their local workstations. Outlook 2010 is working fine through Citrix as well, but on all users if they access Outlook 2010 on their laptop they get an error when trying to do Out of Office messages, and they can't see free/busy time for
other users when adding them to meeting invites.
I already have a post about the issues, but since we are moving to 2013, could the migration fix these issues, or do we need to resolve them first? The data is clearly there, so I don't think that's the problem.
Thanks!
--Kent

Hi,
Did you try to recreate the outlook profile and check the result?
What error did you get when you try to open the Out of Office Assistant in Outlook 2010?
The following article for your reference:
http://support.microsoft.com/kb/2596516/en-us
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

Hi all,
we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
Exchange Server.
We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
Timestamp Sender Recipients MessageSubject
25.02.2015 16:48:52 [email protected].. {}
25.02.2015 17:04:43 [email protected].. {}
25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
25.02.2015 17:13:45 [email protected].. {}
25.02.2015 17:13:55 [email protected].. {}
We can still reproduce the issue on different Mac computers.
Thanks for any help in advance!
Thanks and best regards
Reto

Here is the mailheader form the successfully sent email:
Date: Wed, 25 Feb 2015 17:08:25 +0100
Subject: test 3
From: sender <[email protected]>
To: "'[email protected]'" <[email protected]>
This mailheader is from an email which was not sent out:
User-Agent: Microsoft-MacOutlook/15.6.0.150113
Date: Wed, 25 Feb 2015 16:48:52 +0100
Subject: test 1
From: sender <[email protected]>
To: [email protected] <[email protected]>
Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

I am having trouble sending text messages. They aren't always going through. And sometimes I'm not receiving text messages. I also have voicemails that I didn't receive until late at night that were left early in the day. I need to resolve this issue ASA

I am having trouble sending text messages. They aren't always going through. And sometimes I'm not receiving text messages. I also have voicemails that I didn't receive until late at night that were left early in the day. I need to resolve this issue ASAP!

julie@remax,
I know that this would concern me just the same and we want to make sure that your device is connected and receiving these notifications when available. How long have you been having this issue? Are you receiving a specific error message when sending a message? Are you aware if this happens in one location specifically or everywhere you go? Does the issue with messaging occur with all numbers? Share some details, so that we may assist.
AdamG_VZW
Follow us on Twitter @VZWSupport

When will Apple resolve its issue with Adobe so iPad users can use flash?

When will Apple resolve its issue with Adobe so iPad users can access flash?

That isn't going to happen. Adobe has not only given up on iOS, they have given up on all mobile device now.
Why do you think you need Flash?
Allan

Issue with LCM while migrating planning application in the cluster Env.

Hi,
Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
Error on Shared Service screen:
Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
Error on network:
“java.net.SocketTimeoutException: Read timed out”
ERROR - Zip error. The exception is -
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

Hi,
First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
Open shared services console->File system and you will see the your file name under that.
Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
Follow the steps, select the target application to which you want to migrate and execute migration.
Open the application and you will see all your artifacts migrated to the target.
If you face any error during migration it will be seen in the migration report..
Thanks,
Sourabh

Issue with Word 2010

Hi Team,
We are facing issue with Word 2010.
User has created a document in Word 2007 and they inserted a symbol °C in Times New Roman and Areal.
Please find below the text which has issue.
干燥温度：60℃
温度：95℃，
In the document, instead of ℃ it is showing blocks, when we open it in MS Word 2010. (Eg: 60℃, 95℃).
We have tried the following.
1.       If we select the square and click on any other font, it will change to °C with formatted font Cambria Math. We can have it by selecting any font.
2.       I have tried to copy the line and paste it to excel/WordPad/notepad
• Excel(2010) : It is displayed properly(°C) but the font was Times New Roman and Arial as the word document has Times New Roman and Arial respectively.
• Notepad: It is displayed properly(°C) but the font was Lucida Console
• WordPad: The symbol is not displayed correctly (Squares and vertical lines). It is having the same issue as we have with word document.
3.       I just selected the whole text and had Ctrl+space , then all the corrupted characters turned to original one (°C with formatted font Cambria Math) : we can use this as a work around.
4.       I have created a word document and I typed °C in that document with fonts Times New Roman ,Arial, SimSun and STKaiti and saved the document. When I opened the document I was able to see °C properly.
Kindly help.
Regards,
Sooraj

Hi Sooraj:
For checking the encoding of your documents, please follow below steps:
Rename your documents from xxxx.docx to xxxx.zip
The zip folder will contains basically folders: rels, docProps, word and one [Content_Types].xml
Browse to word, open document.xml file,
<?xml version="1.0" encoding="UTF-8" standalone="true"?>,
the first line will suggest the encoding type of the document.
Except checking the encoding difference, could you please do one more thing that is copying the font like
“Times New Roman” from a computer which display the symbol correctly to the computer which has issue, and please let me know the results, thank you.

Issues with JMS Server migration

Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.

Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody

I currently have Lightroom 3. Do I need to download all of the versions in-between before getting the latest version?

I currently have Lightroom 3. Do I need to download all of the versions in-between before getting the latest version?

Hello Rachel,
this thread could be helpful for you: https://forums.adobe.com/thread/1323362
Hans-Günter

Migrating public folders to exchange 2013 hebrew issue

I am migrating public folders to exchange 2013. half of them a named in hebrew.
The migration fails, the error is character related.
Is it possible at all to migrate hebrew named public folders?

Hi,
Did you got the error message mentioned in the following thread?
http://social.technet.microsoft.com/Forums/exchange/en-US/8b383a46-b710-4fc0-aa0b-e52f288cf93d/e2010-to-e2013-public-folders-migration-failed?forum=exchangesvrdeploy
If so, please check if they are mail-enabled public folders. If they are mail-enabled public folders, please make sure there are no invalid characters in alias.
Based on the description, you couldn't migrate public folders named in Hebrew, other public folders could be moved successfully. If I misunderstood your concern, please let me know.
If the issue persists, I'm afraid you need to rename these public folders in English.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Fix *most but not all* issues with Time Capsule, Time Machine and 10.5.3

There are so many posts related to this issue, that I just wanted to create one short post with a how to fix / quick tips that seems to work for most but granted not all
Issues: Cannot backup, gets stuck into preparing phase or backup volume seems to be corrupted or not working. User was able to use TM with TC w/o problems before update to 10.5.3
1) Turn off TM
2) reboot TC (unplug and plug back in or do it via Airport Utility)
3) Disable energy saving and screen saving features (* see remark at the end)
4) reboot iMac, Macbook or whatever you are using
5) go to finder, unmount the backup volume
6) force a manual backup in TM
7) it will take up to 30 minutes preparing backup and then it should work
(*) I found that if the Mac enters into sleep mode or a password protected screensaver sometimes the backup gets interrupted and one get an error message. This seems like a bug and I reported it to Apple.

Hi! I've had the same problem and in my case I even couldn't access the Time Machine with the Airport Utility though I was properly connected with the network. Now it seems to work, and here's what I did:
- I did a hard reset of TC by pressing the reset button for 5 sec. until the light starts flashing
- I set up the whole network/airport/tc preferences again (what you always have to do after hard reset)
- I manually startet a backup.
When I manually started the back up for the first time, the TM preferences said "Preparing" and then stopped without backing up anything.
I restarted the backup again (manually) and finally it worked like described in this post: "Preparing" for roughly half an hour.
In this time, Time Capsule/Machine finds out, what files needed to be backed up. After that Preparation period, time machine started backing up as usual.
All you have to do is hard resetting and setting up the Time Capsule from new. You DO NOT have to delete the hard drive!!!
Message was edited by: DoubleMumboJumbo
Message was edited by: DoubleMumboJumbo

Sure fire way to resolve all issues.

My DAD bought me an IPOD NANO for xmas last year, It worked for a while and then it just stopped.
I found out that when you have it attached to you during a run or excercising, It may become water logged. By that I mean you may sweat on it. If you accidentally get the connection port wet, You may experience anamolies. One such instance was the message "Cannot connect to Firewire" Press to reset. I got this message a couple of times, I took the thing to my dad to see if he could help resolve the issues. He used a hair dryer to dry it out. Also because of the incident it now had another problem, I couldn't turn it off. After the second or even third time of this happening. My Dad took it and bounced it off the wall. It works great now! No kidding, It actually works great. I wouldn't recommend this though, I think it was a fluke. I just wish The IPOD Shuffle I had would work the same. I used it once and all I got after that wonderful $80.00 dollars I spent was The error message "Cannot read from or write to". I rebooted it four or five time, reinstaled all the software, upgraded. I did just about everything to that one except give it to my dad. Maybe I should.
DELL Windows XP Pro
DELL Windows XP Pro
DELL Windows XP Pro
DELL Windows XP Pro

i know another way to fix ur ipod:
give me $300 and i'll having looking brand new

How do you resolve the issue with an error message on the Mac mini server stating Unable to get users

How do you resolve an issue when creating groups on a Mac Mini Server when this error message appears.
"Unable to get Users & Groups State, The Open Directory master was created, but a problem was encountered trying to refresh the state of the server. Check log files for more info."

Most likely, the Server was not configured correctly - DNS is a common issue, If DNS is not configured properly, OD will not be happy. You can run
sudo changeip -checkhostname
in Terminal to see of DNS is up and running.
Here's a great tutorial (not mine) for setting up OS X Servers. The page says it's for a typical school environment, but it can be applied in many other environments.
http://www.wazmac.com/servers_network/fileservers/osxserver_setup/index.htm
hth
Jeff

How can I resolve an issue with Word 2013 incompatibility errors?

My Client is continually having issues with his Office 2013 installation, specially with Word 2013.
After re-installing Office 2013, he gets the following error when trying to run Word.
When he clicks on the Repair now, he gets the following error;
He used the Microsoft uninstall tolll to fully remove Office 2013 before re-installing Office 2013.
His PC is running Windows 8.1
Any help would be appreciated.

Hi,
Do other Office applications occur the same issue?
Based on this error message, I find a similar issue.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/keep-getting-error-were-sorry-but-word-has-run/b9a014db-c4c6-46aa-95b1-679308735f66?page=5
You can follow Mpw1979’s reply, here is detail information.
“When I tried to change the compatibility mode on Winword.exe I found there were no options available so I right clicked and selected Troubleshoot Compatibility.
From here select Troubleshoot Program then tick I Can't See My Problem Listed and then select Windows 8 from the next screen and apply the changes and it worked.
I should also note I had Abbyy finereader installed and the plugin was causing Word to crash so i simply opened in safe mode and disabled the plug-in.”
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue with TestStand 2010 or 2012 hanging on the first step after continuously running TestStand?

I am having issues with a CVI test sequence hanging in TestStand 2010 & 2012. Currently, the only way to resolve this is to exit/close TestStand. Following this we must replace the entire project with a backup project. This only occurs about once a day or so with the sequence running continuously. It will hang on the first or second step in the sequence, usually the first step. The project uses several continuous XINET CAN messaging, so I wonder if this could be related to that.

Yes, I have. It hangs at the first statement in the code after all the variable defines. It does seem to be related to any particular statement, as we had skipped that test step, and then it hangs on the next step at the first statement.

Do we need to resolve all issues with intermediate 2010 migration before going to Exchange 2013?

Similar Messages

Maybe you are looking for