Doing an ad - I selected Geneva Open type, but when I packaged the ad, it collected Geneva true type which is not allowed.
I'm creating an ad for a newspaper publication that says it only accepts PDFs with Postscript fonts, not accepting True Type fonts. In Illustrator, I had selected the Geneva with the "O" for Open Type. Why when I packaged the ad, Geneva True Type was packaged, if I had selected the Open version in the Type pallet? How do I work around this? I have to make sure that the ad doesn't get rejected. Please help! Thanks.
Hi Monika,
Thanks for the reply. I don't have 2 Georgia installed - I chose the Georgia in Illustrator because it had the "O" and I thought that meant it was an open font, not true type. I guess I don't understand what open means.
I created the ad in Illustrator and saved it as a press-ready PDF file. Then to hand off the files to my client's art department so they could archive, I packaged the illustrator file - that's when I saw the fonts were True Type (Georgia and Arial Narrow). I'm afraid to send the PDF to the publication to have it rejected 0 they don't take True Type, only Postscript. Does this mean I need to create outlines for all the type?
Similar Messages
-
I'm creating an ad for a newspaper publication that says it only accepts PDFs with Postscript fonts, not accepting True Type fonts. In Illustrator, I had selected the Georgia with the "O" for Open Type. Why when I packaged the ad, Georgia True Type was packaged, if I had selected the Open version in the Type pallet? How do I work around this? I have to make sure that the ad doesn't get rejected. Please help! Thanks.
Open Type fonts are just a container which can have either PS or TTF based fonts within it. As long as the font is embedded in the PDF properly, it should work.
-
why is my itunes not opening?
Try downloading it from here:
http://www.apple.com/itunes/download/
As you begin the download, make sure the left side of the screen shows you are downloading the current version (iTunes 11.1.3). -
Unsat!
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
New to here. As said above I updated to 7.02 because I thought I had too. I double click and it shows open apps. I hold one like before and it goes to control board and I have no idea how to close the apps or how to set up that board. I rarely use my phone. I wish I had not updated.
Thanks, it worked, however you cannot do them all at once any more, only one at a time.
-
when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.
Hi
AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
CCT -
Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!
Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can. -
Organizer shows all thumbnails when opening, but if one selected it opens on that when re-opened???
The two books I have neithor offererend an explanation of how to get back to all thumbnails instead of the last one shown before closing.
Help, Help...
Don Wright'but if one selected it opens on that when re-opened???'
Are you saying that if you double click an image in Organizer (so that Organizer now shows single image) and re-launch it you are shown only one image (which was doble clicked last time)? If that is so, then it as as designed that is Organizer remembers your settings from last session. To see all your thumbnails you can click on arrow back button on top left hand corner in PSE10 or earlier (in PSE11 you have 'back' button shown on sort by bar). Please let me know if I missed something.
~Andromeda -
Why does my inbox say I have a email but when I open inbox no email
Why does my inbox say I have a email but when I open inbox no email
Do a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
-
my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,
Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling -
I am trying to "authorize" my new computer so that I can download my previous purchases from the cloud. It says to open iTunes and go to the STORE menu and select AUTHORIZE MY COMPUTER, but when I open iTunes there is no STORE menu. Can anyone help?
If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(85933) -
I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregonmikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR -
ABAP Dictionary type FLTP is not allowed for screen element
Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
<b>Diagnosis</b>
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
<b>Procedure</b>
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
<b>Reward points</b>
Regards -
I have just upgraded to Iphone 4S as my Iphone 3G failed. I want to transfer the data which I believe is stored in my Itunes account. But when I connect the phone to my computer nothing happens it just ask me if I want to download pictures or video. it does not go to my Itunes account.
swisscom say they cannot help it should go to your account and select the phone under devises but I canniot get a screen to do this can anyone help
ThanksTry restarting the AMDS > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
-
I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Maybe you are looking for
-
Goods confirmation with quantity 0 and final delivery set
Dear SRM Experts, I would like to share with you the below problem that i asked to be answered from SAP support and would appreciate any solution suggestions for this problem. The problem I'm facing is relevant for two of my clients: one using SRM 4.
-
Printfab 2.0.4 and 10.4.8 (Client & Server)
Hello In another thread http://discussions.apple.com/thread.jspa?messageID=2223082" I mentioned that I wasn't able to get PrintFab Software running with the Server 10.3.9 Now I tried it again with 10.4.8. No output. You see the client transmit the da
-
Http-Status: 500 Error during conversion of XI message
i am getting this error, Could you please help us in resolving this http-Status: 500 Error during conversion of XI message Payload: <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP:Header> </SOAP:Header> <SOAP:Body> <SOAP
-
How to put pictures in the same size (adjustment) ?
Good afternoon everyone I have a problem. I did a fla with 3 components images (loader), and a button. I would like to know what code would use so that when I click on the button I load the 3 images but adjustable, is said to be in the same size. Whe
-
I cannot see my opened files in photoshop unless I am physically dragging the image window. When I let go, it turns into a black square once again. I have been using the CC version for a couple of months now. Is anyone else having this problem? It wa