Don't need MDS/Planning see some Sales order as demand
Dear Oracle folk,
Do you know how can i create an sales order by that sales order won't be a demand included in the MDS when i load MDS by including the Sales orders.
Is there any option at S/O to set by not creating a demand ?
Thank you ...
Hi,
indeed using Demand Classes is one possibility to achieve what you want.
If I am not mistaken, then all sales orders with visible_demand_flag set to 'Y' (table om_order_headers_all, om_order_lines_all) get collected into ASCP.
You can not set this flag directly in Order Management, but I think you can control this with the scheduling of a sales orders. I think in case the sales order is not scheduled, then it will not be collected. But that I do not know by hard.
regards,
David.
Similar Messages
-
Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.
There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted. -
Some Sales Orders are not replicating into CRM
Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
KenHello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit -
Bill plan of a Sales Order/Contract
Hi,
Where do we create/update the bill plan for a sales order/contract.
I tried VA41 where a bill plan button is provided. But need to understand the bill plan from a functional perspective.
Any short summary on the same will be helpful.
Also please provide Transaction/steps to update a bill plan.
Thanks.
ShreyasHi
A billing plan is a schedule of individual billing dates
for a single item in a sales document.
You can define a billing plan at header level, which is
then valid for all items assigned to it.
During sales order processing, the system determines from
the item category whether a billing plan is required and,
if so, which type of plan: The type of billing plan that
is determined at this point is set up in Customizing and
cannot be changed in the sales document.
For each billing plan you create, you can enter a freely-
definable search term in the details screen of the billing plan in the sales document.
When you save the document, the system automatically
assigns a number that later uniquely identifies the
individual plan.
You can use the search term later to locate specific billing plans.
Transaction code for Sales order - VA01, VA02 & VA03
Kindly check the following link for more information on Billing plan:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560674545a11d1a7020000e829fd11/frameset.htm
kindly reward points for useful answers!
best regards,
Thangesh -
WBS Planned Cost on Sales order
Hi Ajay and Experts,
We have created WBS element and assiged on Sales order line item in Account assigt tab (Accont *** cat M and Valuation M).
Is there any way to get the corresponding Planned cost of WBS on Sales order line item when WBS is assigned.
Thanks,
SudhaHi Manoj,
We are in MTO Scenario but Production order we will settle to Mat itself
WBS assigning on sales order line item.
WBS we are using to capture any addtion cost towards paint etc.,
While calculating the Margin in Sales order we could able to get the Material cost through VPRS but towards the WBS planned cost is missing, so that the Margin is not coreect.
For this purpose we are planning to bring the WBS planned to to sales order to get the correct Margin.
Thanks,
sudha -
Standar report to see the sale order stock collectively
Dear Gurus,
Is there any standard report available to see the sales order stock collectively.
I can see the sale order stock in MMBE. But disadvantage is, at a time i can see a single material only.
I would like to see the sale order stock for more than 1 materials.
For example MB52- Collective inventory stock can be seenDear,
You could check sales order stock using MB52. Tick Also Select Special Stock and fill special stock indicator ='E'
You can check in MMBE t.code by enter material and execute....& see ur slaes order stock in On-order stock segment also try in CO09
Regards,
R.Brahmankar -
Restricting some sales orders in Report
hi i have a problem , i want to restrict some sales orders based one the following logic , can any one help me in coding this logic
if ( 0Doc_categ = k ( Credit memo request) or H (Returns))
get( Sales Documents )
for all these sales Documents get Reference sales Doucmens and the Refece Document Category )
case ( Reference Document category )
when ( 0 )credit memeos
inc = inc + 1 ,
when (s ) credit Memo cancelations
dec = dec + 1 ,
endcase.
if (inc > dec )
result = sales order
esle dont consider the record
i want to implement this login in the report while selecting the Orders , i cant do this in the start routine or update routine becasue other reports consider these sales orders . Thanks in advance.Hi GSM ,
Thanks for ur reply , so is there no chance that i can implement this logic in Customer exit for the report , the probelm is we want to keep the number of ODS to minimus as integration will become a problem in the future in our project. Any one can u plz suggest a way .
Regards,
Abhiram -
Good morning,
does anyboby know if and how is possible planning costs on sales orders?
Currently, sales orders are set as account assignment; actual costs are accounted without problems on sales orders and report KKBC_KUN properly shows costs. But no plan data.
Furthermore, we execute cost estimate on sales orders through CK51N.
Please tell me something more if you know.
Thanks,
Regards
EnricoDear Enrico,
check the documentation at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/ba81d2446711d189420000e829fbbd/frameset.htm
br, Guido -
Route not determing automatically at sales order level for some sales order
Dear All ,
Route not determing automatically at sales order level for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
I have checked all the forums but didn't find any solution for the same.
Looking for your inputs .
Thanks inadvance
Regards
VenkatHi
1. Copare the Routes which are Automatically determined and which are not automatically determined
2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
Thanks
RB -
How to enable Billing plan tab in sales order (lean) with NWBC
Dear All,
The Billing plan tab in sales order (lean) is not availabe with NWBC. How to enable this tab?
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
thanks in advance,
Suresh Yerra.Dear All,
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
Thanks,
Suresh Yerra. -
WBS planned cost in Sales order cost estimate
HI Experts,
Can you please help me in below:
Will it be possible to include WBS planned cost in Sales order cost estimate.
ETO Scenario
Creating Project and booking planned cost
Creating Sales order and assigned the WBS at line item level
WHen i do the sales order cost estimate it calculating cost from Sales order BOM includeing Chars value for KMAT.
I want to know if there is any way to include the WBS planned cost also in the sale order cost estimate.
Can anyonce please provide inputs.
Thanks,
SudhaHi Sudha
Are you saying the WBS Planned cost is in addition to the Sales Order cost estimate? Well, as far as I know, there is no such possibility
you can use Unit Costing feature in Req Class instead of Quantity Structure Based Costing... Then you can enter whatever items you want
br, Ajay M -
Urgent!!!Need code to fetch all sales order data and download to flat file
urgent!!!Need code to fetch all sales order data and download to flat file
D A T A B A S E T A B L E S *
TABLES: vbak, "Sales Document: Header Data
VBAP, "Sales Document: Item Data
MARA,VAPMA,VBPA,VBLB,VBEP,
VBKD. "Murali Poli .
I N T E R N A L T A B L E S *
Internal table to hold the Delphi material numbers file
DATA: BEGIN OF tbl_matnr OCCURS 0,
matnr LIKE mara-matnr, "Material number
END OF tbl_matnr.
Internal table to hold customer cross ref data
DATA: BEGIN OF TBL_CUST_SA OCCURS 0,
OLD_KUNNR LIKE KNA1-KUNNR, "Old Customer
OLD_VKORG LIKE A004-VKORG, "Old Sales organisation
OLD_VTWEG LIKE A004-VTWEG, "Old Distribution channel
NEW_KUNNR LIKE KNA1-KUNNR, "New Customer
NEW_VKORG LIKE A004-VKORG, "New Sales organisation
NEW_VTWEG LIKE A004-VTWEG, "New Distribution channel
PARVW LIKE VBPA-PARVW , "Partner function
END OF TBL_CUST_SA.
Internal table to check the material numbers of the input file
DATA: tbl_mara LIKE tbl_matnr OCCURS 0 WITH HEADER LINE.
Work area to hold the header record
DATA: BEGIN OF w_sa_header,
recordtype(1), "Record type
schedulingagreement(4), "SA Type
contractreference(10), "Contract Reference
salesorg(4), "Sales Organization
distrchannel(2), "Distribution channel
division(2), "Sales division
PONUMBER(35), "Purchase order number"gsbhondave
soldtoparty(12), "Sold-to party
shiptoparty(12), "Ship-to party
collectivenumber(10), "Collective number
description(40), "Description
roundqty(13), "Rounding Qty
pdsi(4), "PDI
correctiondeliverydate(8), "Correction Delivery Dt
correctionqty(13), "Correction Qty
cumulativereceivedqty(13), "Cumulative Received Qty
forecastdeliveryschedule(17), "Forecast Delivery Schedule
forecastdelscheddate(8), "Forecast Delivery Schedule Dt
jitdeliveryschedule(17), "JIT Delivery Schedule
jitdeliveryscheduledate(8), "JIT Delivery Schedule Dt
materialnumber(18), "Material number
plant(4), "Plant
item_category(4), "Item Category
suppliercode(15), "Supplier code
scac(4), "SCAC
deloc(12), "DELOC
pkg_id(12), "Packaging ID
catno(30), "Ultimate Cust Part
lgort(4), "Storage Location
vstel(4), "Shipping point
Adding fields by Murali Poli
VSBED(2), "Shipping conditions
INCO1(3), "Incoterms (part 1)
INCO2(28), "Incoterms (part 2)
ZECN(1), "Engineering Change Letter
End of Adding fields by Murali Poli
END OF w_sa_header.
Work area to hold the forecast record
DATA: BEGIN OF w_sa_forecast,
recordtype(1), "Record Type
dateformat(1), "Date format
forecastdate(8), "Forecast date
forecastorderqty(13), "Order Qty
END OF w_sa_forecast.
Work area to hold the jit record
DATA: BEGIN OF w_sa_jit,
recordtype(1), "Record Type
dateformat(1), "Date format
jitdate(8), "JIT date
jittime(6), "JIT Time
jitorderqty(13), "Order Qty
END OF w_sa_jit.
Internal table to hold the Extracted data
DATA: BEGIN OF tbl_record OCCURS 0,
record_type,
DATA(400), " changed from 325 to 400
END OF tbl_record.
Internal table to capture the errors
DATA: BEGIN OF tbl_error OCCURS 0,
error_text(135),
END OF tbl_error.
Internal table to hold the records of VBAP_VAPMA
DATA: BEGIN OF tbl_vbap_vapma OCCURS 0,
VBELN LIKE VAPMA-VBELN, "Sales and distribution document number
POSNR LIKE VAPMA-POSNR, "Item number
AUART LIKE VAPMA-AUART, "SA Type
VKORG LIKE VAPMA-VKORG, "Sales Organization
VTWEG LIKE VAPMA-VTWEG, "Distribution channel
SPART LIKE VAPMA-SPART, "Division
KUNNR LIKE VAPMA-KUNNR, "Sold-to
plavo like vbap-plavo, "PDI
MATNR LIKE VAPMA-MATNR, "Material number
WERKS LIKE VAPMA-WERKS, "Plant
TRVOG LIKE VAPMA-TRVOG, "Transaction group
VBTYP LIKE VBAK-VBTYP, "SD document category "Murali Poli
VSBED LIKE VBAK-VSBED, "Shipping conditions "Murali Poli
BSTNK LIKE VBAK-BSTNK, " Purchase order number " gsbhondave
KTEXT LIKE VBAK-KTEXT,
VGBEL LIKE VBAP-VGBEL, "Reference document no
ABLFZ LIKE VBAP-ABLFZ, "Rounding qty
PSTYV LIKE VBAP-PSTYV, "Item category
LGORT LIKE VBAP-LGORT, "Storage location
VSTEL LIKE VBAP-VSTEL, "Shipping point
END OF TBL_VBAP_VAPMA.
DATA: BEGIN OF TBL_VBAP OCCURS 0,
VBELN LIKE VAPMA-VBELN,
POSNR LIKE VAPMA-POSNR,
VGBEL LIKE VBAP-VGBEL,
ABLFZ LIKE VBAP-ABLFZ,
PSTYV LIKE VBAP-PSTYV,
LGORT LIKE VBAP-LGORT,
VSTEL LIKE VBAP-VSTEL,
END OF TBL_VBAP.
Adding by Murali Poli
DATA:BEGIN OF TBL_VBKD OCCURS 0,
VBELN LIKE VBKD-VBELN,
POSNR LIKE VBKD-POSNR,
INCO1 LIKE VBKD-INCO1,
INCO2 LIKE VBKD-INCO2,
END OF TBL_VBKD.
End by Murali Poli
Internal table to hold temporarily the records of VBAP_VAPMA
DATA: tbl_vbap_vapma_temp LIKE tbl_vbap_vapma OCCURS 0 WITH HEADER LINE.
Internal table to hold the records of VBPA
DATA: BEGIN OF tbl_vbpa OCCURS 0,
vbeln LIKE vbpa-vbeln, "Sales and distribution
"document number
posnr LIKE vbpa-posnr, "Item number
parvw LIKE vbpa-parvw, "SP Partner type
kunnr LIKE vbpa-kunnr, "Customer number
lifnr LIKE vbpa-lifnr, "SCAC code "DN3K923909
END OF tbl_vbpa.
Internal table to hold the records of VBLB (Forecast)
DATA: BEGIN OF tbl_vblb_forecast OCCURS 0,
vbeln LIKE vblb-vbeln,
posnr LIKE vblb-posnr,
abart LIKE vblb-abart, "Release type
abefz LIKE vblb-abefz, "Cumulative Quantity
"Received by Customer
labnk LIKE vblb-labnk, "Delivery schedule
abrdt LIKE vblb-abrdt, "Deivery date
gjkun LIKE vblb-gjkun, "Current fiscal year
vjkun LIKE vblb-vjkun, "Previous fiscal year
END OF tbl_vblb_forecast.
Internal table to hold the records of VBLB (JIT)
DATA: BEGIN OF tbl_vblb_jit OCCURS 0,
vbeln LIKE vblb-vbeln,
posnr LIKE vblb-posnr,
abart LIKE vblb-abart, "Release type
abefz LIKE vblb-abefz, "Cumulative Quantity
"Received by Customer
labnk LIKE vblb-labnk, "Delivery schedule
abrdt LIKE vblb-abrdt, "Deivery date
gjkun LIKE vblb-gjkun, "Current fiscal year
vjkun LIKE vblb-vjkun, "Previous fiscal year
END OF tbl_vblb_jit.
Internal table to hold the Forecast Schedule lines
DATA: BEGIN OF tbl_vbep_forecast OCCURS 0,
vbeln LIKE vbep-vbeln, "Sales document
posnr LIKE vbep-posnr, "Item number
etenr LIKE vbep-etenr, "Schedule line
edatu LIKE vbep-edatu, "Schedule line date
ezeit LIKE vbep-ezeit, "Arrival time "DN3K923909
wmeng LIKE vbep-wmeng, "Order quantity in sales units
prgrs LIKE vbep-prgrs, "Date type (day, week, month, interval)
abart LIKE vbep-abart, "Release type "DN3K923909
END OF tbl_vbep_forecast.
Internal table to hold the JIT Schedule lines
DATA: BEGIN OF tbl_vbep_jit OCCURS 0,
vbeln LIKE vbep-vbeln, "Sales document
posnr LIKE vbep-posnr, "Item number
etenr LIKE vbep-etenr, "Schedule line
edatu LIKE vbep-edatu, "Schedule line date
ezeit LIKE vbep-ezeit, "Arrival time
wmeng LIKE vbep-wmeng, "Order quantity in sales units
prgrs LIKE vbep-prgrs, "Date type (day, week, month, interval)
abart LIKE vbep-abart, "Release type "DN3K923909
END OF tbl_vbep_jit.
Internal table for Long texts
DATA: tbl_tline LIKE tline OCCURS 0 WITH HEADER LINE.
V A R I A B L E S *
DATA: v_count TYPE i,
V_REPID LIKE SY-REPID,
w_eins LIKE vbap-umvkz VALUE 1,
v_cumulative_deli_qty LIKE vblb-abefz,
v_text_name LIKE thead-tdname,
v_week LIKE scal-week,
v_count_h TYPE i, "Count of header records
v_count_f TYPE i, "Count of Forecast records
v_count_j TYPE i, "Count of JIT records
v_count_t TYPE i. "Count of Shipping instructions
TYPES: unixfile LIKE rlgrap-filename,
unixdir LIKE rlgrap-filename.
DATA: v_file1 TYPE unixfile,
v_file2 TYPE unixfile.
DATA: tbl_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE.
*data tbl_cust_sa.
S E L E C T - O P T I O N S / P A R A M E T E R S *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
Valid-to date
PARAMETER:
p_gueen like vbak-gueen obligatory,
Correction Delivery date
P_DELDT LIKE VBAK-GUEEN OBLIGATORY.
Begin of Changes - TIR-40266
Plant
SELECT-OPTIONS: s_werks FOR vbap-werks.
*SD document category
SELECT-OPTIONS: S_VBTYP FOR VBAK-VBTYP OBLIGATORY." Murali Poli
Sales organization
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG OBLIGATORY.
End of Changes - TIR-40266
SELECTION-SCREEN SKIP 1.
PARAMETER: r1 RADIOBUTTON GROUP rg1.
Material numbers file
PARAMETER: P_FILE1 LIKE RLGRAP-FILENAME.
PARAMETER: P_FILE6 LIKE RLGRAP-FILENAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-003.
SELECTION-SCREEN POSITION 33.
SD SA Extract file
PARAMETER: P_FILE2 LIKE RLGRAP-FILENAME
DEFAULT 'C:\sd_sa_extract.txt'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 2.
PARAMETER: r2 RADIOBUTTON GROUP rg1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-004.
SELECTION-SCREEN POSITION 33.
PARAMETER: p_path1 TYPE unixdir OBLIGATORY DEFAULT '/tmp/'.
SELECTION-SCREEN END OF LINE.
Material numbers file
PARAMETER: PU_FILE1 LIKE RLGRAP-FILENAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-003.
SELECTION-SCREEN POSITION 33.
SD SA Extract file
PARAMETER: PU_FILE2 LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(64) text-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
A T S E L E C T I O N S C R E E N E V E N T S *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
v_repid = syst-repid.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = v_repid
CHANGING
file_name = p_file1
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e009.
Message shown as 'Error while getting the file name'
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE6.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = v_repid
CHANGING
FILE_NAME = P_FILE6
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e009.
Message shown as 'Error while getting the file name'
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file2.
v_repid = syst-repid.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = v_repid
CHANGING
file_name = p_file2
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e009.
Message shown as 'Error while getting the file name'
ENDIF.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP rg1.
IF r1 = 'X'.
IF p_file1 = '' OR p_file2 = ''.
MESSAGE w000 WITH 'Please select a PC file'.
ENDIF.
LOOP AT SCREEN.
IF screen-name = 'P_FILE1' OR
screen-name = 'P_FILE2'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF r2 = 'X'.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE1' CHANGING pu_file1.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE2' CHANGING pu_file2.
IF pu_file1 = '' OR pu_file2 = ''.
MESSAGE w000 WITH 'Please select a UNIX file'.
LOOP AT SCREEN.
IF screen-name = 'PU_FILE1' OR
screen-name = 'PU_FILE2'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pu_file1.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE1' CHANGING pu_file1.
PERFORM popup_unix_filename CHANGING p_path1 pu_file1.
PERFORM set_value USING 'P_PATH1' p_path1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pu_file2.
PERFORM get_value USING 'P_PATH1' CHANGING p_path1.
PERFORM get_value USING 'PU_FILE2' CHANGING pu_file2.
PERFORM popup_unix_filename CHANGING p_path1 pu_file2.
PERFORM set_value USING 'P_PATH1' p_path1.
T O P - O F - P A G E *
TOP-OF-PAGE.
PERFORM delphi_header(z_delphi_header_footer)
USING
'E & S SD SCHEDULING AGREEMENTS EXTRACT DATA'(016)
space
sy-linsz.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
IF r1 = 'X'.
PERFORM upload_data_from_pc_files.
ELSEIF r2 = 'X'.
PERFORM upload_data_from_unix_files.
ENDIF.
PERFORM check_input_data.
PERFORM get_sd_sa_data.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
PERFORM process_data.
S U B - R O U T I N E S *
*& Form get_value
FORM get_value USING value(p_fieldname)
CHANGING value(p_fieldvalue).
IF v_repid IS INITIAL.
v_repid = syst-repid.
ENDIF.
REFRESH: tbl_dynpfields.
CLEAR: tbl_dynpfields.
tbl_dynpfields-fieldname = p_fieldname.
APPEND tbl_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = v_repid
dynumb = '1000'
TABLES
dynpfields = tbl_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF syst-subrc = 0.
READ TABLE tbl_dynpfields INDEX 1.
p_fieldvalue = tbl_dynpfields-fieldvalue.
ENDIF.
REFRESH: tbl_dynpfields.
ENDFORM. " get_value
FORM POPUP_UNIX_FILENAME *
Pops up dialog box to explore the unix filesystem and select a file *
--> VALUE(P_PATH) Path where to start exploring from *
--> VALUE(P_FILENAME) Default filename in the dialog box *
FORM popup_unix_filename CHANGING value(p_path) TYPE unixdir
value(p_filename) TYPE unixfile.
DATA: v_length TYPE i,
v_filename TYPE unixfile,
v_directory LIKE draw-filep,
v_file LIKE draw-filep.
IF p_filename(1) = '/' OR
p_path IS INITIAL.
v_filename = p_filename.
ELSE.
v_length = strlen( p_path ) - 1.
IF p_path+v_length(1) <> '/'.
CONCATENATE p_path '/' INTO p_path.
ENDIF.
CONCATENATE p_path p_filename INTO v_filename.
ENDIF.
CALL FUNCTION 'Z_UNIX_FILENAME_GET'
EXPORTING
def_filename = v_filename
mask = ',*.'
mode = 'G'
title = 'Get UNIX file...'
IMPORTING
filename = v_filename
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
CHECK syst-subrc = 0.
CALL FUNCTION 'CV120_SPLIT_PATH'
EXPORTING
pf_path = v_filename
IMPORTING
pfx_path = v_directory
pfx_file = v_file
EXCEPTIONS
OTHERS = 1.
CHECK syst-subrc = 0.
IF v_directory = p_path.
p_filename = v_file.
ELSE.
p_filename = v_filename.
ENDIF.
ENDFORM.
FORM SET_VALUE *
Sets the value of a field on the selection screen. *
--> VALUE(P_FIELDNAME) Name of the field on the selection screen*
--> VALUE(P_FIELDVALUE) Value of the field *
FORM set_value USING value(p_fieldname)
value(p_fieldvalue).
IF v_repid IS INITIAL.
v_repid = syst-repid.
ENDIF.
CLEAR: tbl_dynpfields.
tbl_dynpfields-fieldname = p_fieldname.
tbl_dynpfields-fieldvalue = p_fieldvalue.
APPEND tbl_dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = v_repid
dynumb = '1000'
TABLES
dynpfields = tbl_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDFORM.
*& Form upload_data_from_pc_files
This subroutine is used to upload the data from input files
FORM upload_data_from_pc_files.
REFRESH: tbl_matnr.
CLEAR: tbl_matnr.
Upload the data from Delphi Materials file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file1
filetype = 'DAT'
TABLES
data_tab = tbl_matnr
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE e008 WITH 'Materials file'.
Message shown as "Error while reading Materials file"
ENDIF.
IF sy-subrc = 0 AND tbl_matnr[] IS INITIAL.
MESSAGE e013 WITH 'Materials'.
Message shown as "No records found in Materials file"
ENDIF.
DELETE tbl_matnr WHERE matnr = ''.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_FILE6
filetype = 'DAT'
TABLES
DATA_TAB = TBL_CUST_SA
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE E008 WITH 'Customer/Sales Area Cross Reference file'.
Message shown as "Error while reading Materials file"
ENDIF.
ENDFORM. " upload_data_from_pc_files
*& Form upload_data_from_unix_files
This subroutine is used to upload the data from UNIX files
FORM upload_data_from_unix_files.
REFRESH: tbl_matnr.
CLEAR: tbl_matnr.
Get the complete filename for the Materials file
PERFORM get_full_filename USING pu_file1 CHANGING v_file1.
Open the Materials file
PERFORM open_dataset USING v_file1 'I' 'T' 1.
CHECK syst-subrc = 0.
Read the materials file
DO.
READ DATASET v_file1 INTO tbl_matnr.
IF syst-subrc <> 0.
EXIT.
ENDIF.
Populate the read data into the internal table
APPEND tbl_matnr.
ENDDO.
PERFORM close_dataset USING v_file1.
ENDFORM. " upload_data_from_unix_files
FORM GET_FULL_FILENAME *
Uses the logical path if necessary to get the full filename *
If the filename already has a directory specified, that itself will *
be the full filename *
Else the logical path for Conversions will be prefixed to the given *
filename *
FORM get_full_filename USING value(p_file) TYPE unixfile
CHANGING value(p_fullfile) TYPE unixfile.
DATA: v_length TYPE i.
IF p_file(1) = '/' OR
p_path1 IS INITIAL.
p_fullfile = p_file.
ELSE.
v_length = strlen( p_path1 ) - 1.
IF p_path1+v_length(1) = '/'.
CONCATENATE p_path1 p_file INTO p_fullfile.
ELSE.
CONCATENATE p_path1 '/' p_file INTO p_fullfile.
ENDIF.
ENDIF.
ENDFORM.
FORM OPEN_DATASET *
Opens dataset in the specified mode *
--> VALUE(P_FILE) Name of file to be opened *
--> VALUE(P_IOMODE) 'I' for Input / 'O' for Output *
--> VALUE(P_BTMODE) 'T' for Text / 'B' for Binary *
--> VALUE(P_LEVEL) If set to > 1, will write error message to *
list Else will supress the error message but *
will be available in SYST-MSGV1 *
FORM open_dataset USING value(p_file) TYPE unixfile
value(p_iomode) TYPE c
value(p_btmode) TYPE c
value(p_level) TYPE i.
DATA: v_rc LIKE syst-subrc,
v_msg(100),
v_listmsg(100).
IF p_iomode = 'O'.
IF p_btmode = 'B'.
OPEN DATASET p_file FOR OUTPUT IN BINARY MODE MESSAGE v_msg.
ELSE.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE MESSAGE v_msg.
ENDIF.
ELSE.
IF p_btmode = 'B'.
OPEN DATASET p_file FOR INPUT IN BINARY MODE MESSAGE v_msg.
ELSE.
OPEN DATASET p_file FOR INPUT IN TEXT MODE MESSAGE v_msg.
ENDIF.
ENDIF.
IF syst-subrc <> 0.
v_rc = syst-subrc.
syst-msgv1 = v_msg.
IF p_level > 0.
CONCATENATE 'Unable to open' p_file
INTO v_listmsg
SEPARATED BY space.
IF p_iomode = 'O'.
CONCATENATE v_listmsg 'for Output'
INTO v_listmsg
SEPARATED BY space.
ELSE.
CONCATENATE v_listmsg 'for Input'
INTO v_listmsg
SEPARATED BY space.
ENDIF.
IF p_iomode = 'B'.
CONCATENATE v_listmsg 'in Binary mode'
INTO v_listmsg
SEPARATED BY space.
ELSE.
CONCATENATE v_listmsg 'in Text mode'
INTO v_listmsg
SEPARATED BY space.
ENDIF.
WRITE: / v_listmsg.
WRITE: /3 '--', v_msg.
syst-subrc = v_rc.
ENDIF.
ENDIF.
ENDFORM.
FORM CLOSE_DATASET *
Closes dataset *
--> VALUE(P_FILE) Name of the file to be closed *
FORM close_dataset USING value(p_file) TYPE unixfile.
CLOSE DATASET p_file.
ENDFORM.
*& Form check_input_data
This subroutine is used to check the data from X Ref files
FORM check_input_data.
DESCRIBE TABLE tbl_matnr LINES v_count.
Use the material conversion routine to pad the material numbers
with zeroes
LOOP AT tbl_matnr.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = tbl_matnr-matnr
IMPORTING
output = tbl_matnr-matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
TRANSLATE tbl_matnr-matnr TO UPPER CASE.
MODIFY tbl_matnr.
ENDLOOP.
Get the materials from SAP database using the input materials
IF NOT tbl_matnr[] IS INITIAL.
SORT tbl_matnr BY matnr.
SELECT matnr FROM mara
INTO TABLE tbl_mara
FOR ALL ENTRIES IN tbl_matnr
WHERE matnr = tbl_matnr-matnr.
SORT tbl_mara BY matnr.
ENDIF.
Check the existence of input materials in SAP database
LOOP AT tbl_matnr.
READ TABLE tbl_mara WITH KEY matnr = tbl_matnr-matnr
BINARY SEARCH.
IF sy-subrc <> 0.
CONCATENATE 'Material' tbl_matnr-matnr 'does not exist'
INTO tbl_error-error_text
SEPARATED BY space.
APPEND tbl_error.
CLEAR tbl_error.
DELETE tbl_matnr.
ENDIF.
ENDLOOP.
ENDFORM. " check_input_data
*& Form get_sd_sa_data
This subroutine is used to get the SD Scheduling data from database
FORM get_sd_sa_data.
*begin of changes - DN3K923909
DATA: tbl_vbep LIKE tbl_vbep_forecast OCCURS 0 WITH HEADER LINE,
tbl_vblb LIKE tbl_vblb_forecast OCCURS 0 WITH HEADER LINE.
*end of changes - ND3K923909
REFRESH: tbl_vbap_vapma, tbl_vbpa, tbl_vblb_forecast,
tbl_vblb_jit, tbl_vbep_forecast, tbl_vbep_jit.
CLEAR: tbl_vbap_vapma, tbl_vbpa, tbl_vblb_forecast,
tbl_vblb_jit, tbl_vbep_forecast, tbl_vbep_jit.
Get the Scheduling Agreements
SELECT avbeln aposnr
a~vgbel
AAUART avkorg avtweg aspart a~kunnr
a~ablfz
A~MATNR
a~pstyv
a~werks
a~lgort
a~vstel
ATRVOG BVBTYP BVSBED BBSTNK B~KTEXT
FROM VAPMA AS A INNER JOIN VBAK AS B
ON bvbeln = avbeln
INTO TABLE tbl_vbap_vapma
FOR ALL ENTRIES IN tbl_mara
WHERE a~matnr = tbl_mara-matnr
Begin of Changes - TIR-40266
AND a~vkorg IN s_vkorg
AND a~werks IN s_werks
End of Changes - TIR-40266
AND A~TRVOG = '3'
AND B~VBTYP IN S_VBTYP. "Murali Poli
and a~abgru = ''
and b~gueen >= p_gueen.
SORT tbl_vbap_vapma BY vbeln posnr.
IF NOT tbl_vbap_vapma[] IS INITIAL.
SELECT VBELN POSNR VGBEL ABLFZ PSTYV LGORT VSTEL FROM VBAP
INTO TABLE TBL_VBAP FOR ALL ENTRIES IN TBL_VBAP_VAPMA
WHERE VBELN = TBL_VBAP_VAPMA-VBELN
AND POSNR = TBL_VBAP_VAPMA-POSNR.
LOOP AT TBL_VBAP_VAPMA.
READ TABLE TBL_VBAP WITH KEY VBELN = TBL_VBAP_VAPMA-VBELN
POSNR = TBL_VBAP_VAPMA-POSNR.
IF SY-SUBRC = 0 .
TBL_VBAP_VAPMA-VBELN = TBL_VBAP-VBELN.
TBL_VBAP_VAPMA-POSNR = TBL_VBAP-POSNR.
TBL_VBAP_VAPMA-VGBEL = TBL_VBAP-VGBEL.
TBL_VBAP_VAPMA-ABLFZ = TBL_VBAP-ABLFZ.
TBL_VBAP_VAPMA-PSTYV = TBL_VBAP-PSTYV.
TBL_VBAP_VAPMA-LGORT = TBL_VBAP-LGORT.
TBL_VBAP_VAPMA-VSTEL = TBL_VBAP-VSTEL.
MODIFY TBL_VBAP_VAPMA .
ENDIF.
ENDLOOP.
tbl_vbap_vapma_temp[] = tbl_vbap_vapma[].
*--Begin of UnCommentDIR-51476-DN3K932648
-------------- Begin of Comment ----------- CCR-50124 DN3K928457
SORT tbl_vbap_vapma_temp BY vbeln.
DELETE ADJACENT DUPLICATES FROM tbl_vbap_vapma COMPARING vbeln.
-------------- End of Comment ----------- CCR-50124 DN3K928457
*--End of UnCommentDIR-51476-DN3K932648
*--Begin of CommentDIR-51476-DN3K932648
-------------- Begin of Insert ----------- CCR-50124 DN3K928457
Duplicate Line Items are being deleted.
SORT tbl_vbap_vapma BY vbeln posnr.
DELETE ADJACENT DUPLICATES FROM tbl_vbap_vapma COMPARING vbeln posnr.
The field for contract in SA is being modified for uniqueness
loop at tbl_vbap_vapma.
clear: v_vgbel, v_posnr.
v_vgbel = tbl_vbap_vapma-vgbel.
v_posnr = tbl_vbap_vapma-posnr.
if not v_vgbel is initial .
shift v_vgbel left deleting leading v_zero.
shift v_posnr left deleting leading v_zero.
v_posnr = v_posnr / 10.
condense: v_vgbel, v_posnr.
if v_posnr le 9.
concatenate v_vgbel '0' v_posnr into v_vgbel.
else.
concatenate v_vgbel v_posnr into v_vgbel.
endif.
endif.
tbl_vbap_vapma-vgbel = v_vgbel.
modify tbl_vbap_vapma.
endloop.
-------------- End of Insert ----------- CCR-50124 DN3K928457
*--End of CommentDIR-51476-DN3K932648
Get the Partner details
select vbeln posnr parvw kunnr
*Start of Murali Poli
SELECT VBELN POSNR INCO1 INCO2
INTO TABLE TBL_VBKD
FROM VBKD
FOR ALL ENTRIES IN TBL_VBAP_VAPMA
WHERE VBELN = TBL_VBAP_VAPMA-VBELN.
and posnr = tbl_vbap_vapma-posnr.
*End of Murali Poli
SELECT vbeln posnr parvw kunnr lifnr "DN3K923909
INTO TABLE tbl_vbpa
FROM vbpa
FOR ALL ENTRIES IN tbl_vbap_vapma_temp
WHERE vbeln = tbl_vbap_vapma_temp-vbeln
AND parvw IN ('WE', 'SP').
*begin of changes - DN3K923909
select vbeln posnr abart abefz labnk abrdt gjkun vjkun
into table tbl_vblb_forecast
from vblb
for all entries in tbl_vbap_vapma
where vbeln = tbl_vbap_vapma-vbeln
and posnr = tbl_vbap_vapma-posnr
and abrli = '0000'
and abart = '1'.
SELECT vbeln posnr abart abefz labnk abrdt gjkun vjkun
INTO TABLE tbl_vblb
FROM vblb
FOR ALL ENTRIES IN tbl_vbap_vapma
WHERE vbeln = tbl_vbap_vapma-vbeln
AND posnr = tbl_vbap_vapma-posnr
AND abrli = '0000'
AND abart IN ('1','2').
SELECT vbeln posnr etenr edatu ezeit wmeng prgrs abart
INTO TABLE tbl_vbep
FROM vbep
FOR ALL ENTRIES IN tbl_vbap_vapma
WHERE vbeln = tbl_vbap_vapma-vbeln
AND posnr = tbl_vbap_vapma-posnr
AND abart IN ('1','2').
Get the current Forecast delivery schedule
tbl_vblb_forecast[] = tbl_vblb[].
DELETE tbl_vblb_forecast WHERE abart = '2'.
Get the current Forecast Schedule lines
tbl_vbep_forecast[] = tbl_vbep[].
DELETE tbl_vbep_forecast WHERE abart = '2'.
Get the current JIT delivery Schedule
select vbeln posnr abart abefz labnk abrdt gjkun vjkun
into table tbl_vblb_jit
from vblb
for all entries in tbl_vbap_vapma
where vbeln = tbl_vbap_vapma-vbeln
and posnr = tbl_vbap_vapma-posnr -
In ASCP Workbench - Need to take action against sales order types
Hi Team,
I am facing one issue, In ASCP workbench, when we query an item with conditions Order type=Sales Order, I can see many rows with Action=Release, Action=None.
Some rows with Action=None is in pink colour (without taking action against this in ASCP WB) and some in black colour.
For rows with Action = Release, We can check the Release check box and can modify the "Implement date" field, Save and Release (Tools-->Release). Then we can see the changes in Schedule ship date field in Sales Order line (Source Instance)
But for Action=None, We can't check the Release check box (But User want to implement New date for this also)
Since this is linked with OM, I am in a position to solve the issues urgently based on the below questions.
1. Which one triggers the Action=Release or None
2. What modification needs to change in SO line (Source instance) to know the changes in Action column in ASCP WB.
3. User needs to implement new dates for the items having Action=None also. For this how can override or any workaround is there?
Note: For the items having same Old due dates and
Please suggest me ASAP.
Thanks and Regards,
RameshDear Ramesh
Ones in Pink - Your plan is ATP enabled plan. So if there is a new sales order entered in OM module there is a sales order entry made in the ATP table the moment its scheduled in source. But since ASCP has nt been run yet they are still showing actiona s none in the plan.
W r t one with action release your understanding of ship date updation through ascp release is correct.
Why does customer want to chnage date on other sales orders (action-none) ? . ASCP has planned and it is saying that such is the date of expected shipment and so action is none. Any business reason why a date change and release is required on action none sales orders? By default behaviour action None cant be released to source .
Best Regards
Partha -
Billing plan dates in Sales order
Hi Experts,
i am creating a sales order and i need to populate the date in billing per from Ztable as per payment terms.
1 . the enhancement i am using is V60F0001 - > EXIT_SAPLV60F_001 and inside i have kept a break point. but it is not stopping. i have also created the project in CMOD and assigned this enhancement but still it is not working.
2. is there any enhance ment or user exit i need to use.. to change the date in billing plan for sales order.
is there any BADI i can change the billing plan dates.
Thanks in Advance.Hi,
Yes this is std behaviour.
You need to do some enhacement to get this working.
BR -
ECP Planned values into Sales order
Hi,
I have a scenario where client maiantians the planned costs with ECP for around 50 wbs elements. Client would like to bill the customer based on the planned costs of wbs elements.
He would like to see all the wbs elements as individula line items in the sales order and then he will add some mark up and then bill the customer.
Is there any process where i can transfer the planned cost of each wbs element into sales order as line items?
Please suggest.
RamsHi Ravi,
I am using an internal activity and sometimes maiantaining ECP for activities also. But when i click on sales price system is not picking up the activity plan values. I tried different combinations on ODP1 but its not triggering the activity ecp values.
Characteristics i chose in the DIP profile are
1. Activity number Char relevant
2.Cost element do
3.Material do mat determination
4.object number do
5.Transaction Currency do No Summarization
6.UOM do do
7.WBS do
i didnt selected structuring for any of these characteristics.
Could you pls tell me how to pick the activity into sales price screen.
Thanks in advance.
Rams
Maybe you are looking for
-
Create excel file in document library from the data in datatable
Hi , I want to generate files dynamically and have then saved to my documetn library instead of some location on the harddisk. I want to generate and excel file which will read data from the sharepoint list. Form that data excel will be genereated
-
Spatial Query by users other than data owner
I am having a problem with a spatial query that works perfectly for the user that owns the table containing the SDO_GEOMETRY column. But I am unable to make this query work for other users. I am aware that the problem is related the using the indexes
-
Real World Item Level Permission Performance?
I am considering implementing item level permission on a list we use. I've seen all the articles online cautioning not to do this with lists of more than 1000 items, but the articles seem to have little detailed information about the actual impact an
-
I have no map in the app just a blank graph with a blue dot for my location...hmmm,whats up what do I do?
-
PR 1.1 for N8 UK is available for PC download
Having tried an OTA download from my N8 with no success, when I synced my device with my PC this morning, OVI suite told me the update was available to download. Mine is UK unbranded handset. Stil not available OTA though.