Downloaded Airport Update & Now It's Not Working. HELP

I downloaded the latest update for my airport extreme 2 days ago, and now all my airport does is blink continuously yellow. When I open the airport utility, it does not find the airport. What do I do?
thanks

i was able to correct the problem simply by disconnecting the modem from the power supply for about 5 minutes. I wasn't unplugging it long enough before. thanks for your message

Similar Messages

  • Updated now phone does not work

    Updated yestrerday now 4S Iphone will not work. Unable to restore all the screen shows is a black background Itunes logo and the white plug pointing at the Itunes logo. Called everyone no one has helped me at all.

    That means you'll need to plug your phone into your computer with iTunes since your phone is in recovery mode.   You will need to restore it from your last backup once the phone finishes updating.

  • I downloaded itunes upgrade now it does not work com.apple.ipod.plist

    com.apple.ipod.plist
    this was in a download but i can not access i tunes since i did the upgrade sept, 21st of this year...

    Why not?  What happens when trying to use it?
    "Will not work" is useless when asking for help.  Without specifics, no assistance can be provided.

  • Just got my airport express and it's NOT working (Help)

    Hi,
    I've just got my airport express 2 days a go and I've try many time to set it with my black macbook and my pc and it's not working at all...
    When I've plugged it, the ligth went grenn and then solid amber and then it flashed as it was suppose to do. After that I wend in the "utility airport" on my macbook, I was seeing my airport express but when I clicked continue, the computer was searching for something for 30 minutes and then I realized that I was connected on the internet but that my networks were not configured.
    So I've decided to try to do a factory reset. And then my macbook couldn't see my airport anymore. So I've try with my pc and it has recognized my airport. I've started to do the configuration, but at some point, my computer couldn't see my airport anymore...
    So please help, what can I do to make airport express properly.
    Thanks
    Vero

    I really need some help please...
    I've tried to connect directly my macbook to airport with my ethernet cable to configure airport express... but when I've open the airport express utility, my computer couldn't find my airport express...
    PLEASE I NEED SERIOUS HELP !!!
    I really think about bringing airport back to the apple store

  • Downloaded update, now printer will not work.

    After downloading the newest update yesterday - the printer (HP Officejet Pro 8500A Plus) will not respond.  The MacBook Pro message shows that it is printing.  Nothing is happening.
    This happened after the last update also and it took 3/4 hour with my tech support to get the printer reinstalled.  I can, of course, go through that process again, but there should be an easier way.
    1.  The update should not shut down the printer connection.
    2.  It shoult not take so long and so many steps to get it connected again.
    Any suggestions?

    Have you contacted HP to see if you need to download any of their updated drivers? 
    Have you tried repairing permissions and restarting your computer afterwards? 
    Which os are you using? 

  • Control Center worked once after downloading iOS 7, now it's not working at all.

    I downloaded iOS 7 to my iPhone 5. The Control Center worked once and then stopped. I can't access it from the lock screen or apps, even though both are enabled in Settings. When I double-click the home button when the phone is locked, nothing happens, and in the lock screen, I can see the bar at the bottom to show where to swipe up, but there's no response when I swipe. I didn't change any settings that I know of, and can't figure out how to fix this problem. I really like the Control Center and want to use it!

    My iPad 2 front camera stopped working soon after updating to OS7; coincidence or not I don't know, but once again, since so many others have this problem, I think Apple should take ownership of this issue and come up withy a real fix. I'm tired of hearing 'reboot' as a cure all. Same goes for non-functioning SIM problem still not addressed by Apple.

  • Not able to get my aol mail on firefox. Trying to download firefox update but it is not working

    I can browse the web on my Firefox but stopped being able to get my aol email 5 days ago. I can send email. I can receive the email on webmail.aol. A friend suggested I update my Firefox. I tried and it isn't loading. Thanks. Gwen Todd

    The GMail is you AppleID, don't confuse yourself.
    For your e-mail check Settings > Mail, Contacts, Calendars >  your account > your e-mail provider settings here.

  • Downloaded drivers for the MS6570 do not WORK - HELP!

    Hello,
    I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php  
    and from:
    http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
    Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
    Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
    I appreciate any info.

    I appreciate everyone's reply....
    Here is what I have done.
    I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
    Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
    I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
    Thanks for any help again.

  • IPod not properly ejected- now iTunes will not work - Help!

    My friend had his ipod connected to my computer to charge. Conneceted through USB on a Dell/ Windows 2000 / system. He disconnected the ipod without properly ejecting it - Now, when i connect my ipod, iTunes will not recognize it- iTunes does not open- screen just reads do not disconnect. When i manually open itunes with the ipod attached, it freezes. I have re-installed iTunes, rebooted the ipod, nothing works. Recommendations? Have scowered this site for answers, tried just about everything, nothing has worked. Your help is greatly appreciated!
    PC   Windows 2000  

    See if anything in this Knowledge Base article helps: iPod shows up in Windows but not in iTunes

  • Downloaded Update Software now Ipod is not working - Please Help

    I downloaded Update Software onto Ipod and now Ipod is not working. It is stating "Itunes detected an Ipod in recovery mode. You must restore this ipod before it can be used in Itunes". Here's the deal I did that now the Ipod just blinks the circle with the line through it and says do not disconnect. Nothing happens. Has the new software corrupted my Ipod? Can anyone Help

    Try the instructions here.
    iPod is in recovery mode.
    Message was edited by: Jeff Bryan

  • Tried downloading itunes version 11.4 and received an error code 2324. Now itunes will not work at all and I cannot sync my phone, ipad or ipod. How should I proceed?

    I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date,  now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • TS3694 i update my iphone4 4.3.5 to 6.0 , now it is not working , wht i do now?

    i update my iphone4 4.3.5 to 6.0 , now it is not working , wht i do now?

    See
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

  • I downloaded the newest version of itunes.  now Quicktime is not working with it.  I reinstalled itunes as directed and it's still not working

    I downloaded the newest verion of itunes.  Now quicktime is not working...error 2096.  I have uninstalled and reinstalled itunes.  still nothing.  i have read countless other people having the same issue.  What is the problem?????

    error 2096
    That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

Maybe you are looking for