Downloading new product

I just purchased Adobe Photoshop Elements 11 & Adobe Premiere Elements 11 (combo) and got two serial numbers. When downloading both numbers were rejected. Why?

no serial number is needed to download adobe products.
did you mean you have a problem when trying to install/activate your programs?
if yes, double check that you're using the correct numbers (http://helpx.adobe.com/x-productkb/global/find-serial-number.html) and if you're certain you're using the correct numbers and they are rejected, contact adobe support (http://www.adobe.com/support/chat/ivrchat.html).

Similar Messages

Why can't you permit me to accept what you are stuffing down my throat with"download new product" over and over and over???!!!!

I am receiving "update to the latest version" over and over and over again and when I click "OK" you give me garbage! I can't go beyond that page. I thought I had the latest version, something like 35. Things are working fine without your "latest version",just get off my back!
Update to the latest version http://www.lpmxp2014.com/4569674351356F666C3B2C207A35296B9375E085D1F04A1010285A519D229E1456B4057B6B58E2821D5F349C9F2311CF?tgu_src_lp_domain=www.moresoftdll.com&ClickID=nym1CO7Wsprp0_OkKxACGMDQl-XDmbyPZiINOTYuMjQxLjg4LjExMygBMNPloZ0F&PubID=146508

This is a fake page, do update only from official page:
*[http://www.mozilla.org/firefox/new/]
This page comes up when you click on a link? Open Firefox?
Try Start in Safe Mode, sometimes this problem is caused by addons:
*[http://mzl.la/MwuO4X Firefox in safe mode]
Case the problem doesnt occur in Safe Mode:
*[http://mzl.la/MAyOQc Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
Sometimes the problem can be Malwares:
*[http://mzl.la/MPPnpl Problems with malwares]
Also, you can use addons to block popups/ads:
*[https://addons.mozilla.org/firefox/addon/adblock-plus Adblock Plus]
*[https://addons.mozilla.org/firefox/addon/simple-adblock Simple Adblock]
*[https://addons.mozilla.org/firefox/addon/adblock-plus-pop-up-addon Adblock Plus Pop-up Addon]

Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

Hi petrosk47967892,
In order to reactivate this product on a new machine, you can simply download & Install the product on the new machine using the following link and enter the serial number when prompted. Make sure to deactivate the product from your old machine by launching any one of the products, go to Help>Deactivate/signout.
Download CS6 : Download CS6 products
Cheers,
Kartikay Sharma

Downloading BP/Products/Conditions /transaction from R/3 to CRM

Could u pls tell me the how to Downloading BP/Products/Conditions /transaction from R/3 to CRM
Business partner mapping
Thanks in advance
kumar

Hi Rahul
As stated above this will happen in case the number is already assigned to a business partner.
Are you
1. Reconnecting the CRM system to a new R/3 and the CRM system has data from an old system?
2. Has the replication been done before
3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
Rewards points if this was helpful.

New production server PLUS upgrade!

After years of groveling, weekly church visits, and burning incense, it appears that I will finally be able to get a new production server for our 3.3 TB data warehouse. They are also going to add 2 TB of space to our main storage array.
In addition, management wants to upgrade from 10.2.0.3 to 11gR2 as part of that migration. Our current server was not able to handle 11g, according to Oracle.
In recent times, I have had to do some very non-standard things as a dba, mostly due to insufficient resources. So these migrations may not be as straightforward as what you read in the docs, and therefore I would like some opinions about how best to achieve the migration to the new box, and to 11gR2.
Our current environment is a Sunfire 6800 Sparc 64 box with 12 900mhz cpus and 16G of ram, and Solaris 10.
Most of our datafiles are housed on a 3.7 TB Sun 2540 storage array, but due to space and performance constraints, it was decided to put one very large and mostly unimportant tablespace (350G) on a 2.1 TB Sun 3511 array. We also put our 2 temporary tablespaces (about 54G) on that array. Also on the 3511 array is our db_recovery_file_dest area, with all of our archived redo logs and flashback logs. Due to lack of space there, I have to direct our RMAN database file backups, archived log backups, and exports to an unsupported Hitachi SAN, which is 8 years old, like our Sunfire 6800.
The new server is a Sun M4000 with Solaris 10, so the OS will not be an issue. It will have 4 4-way 2.5ghz processors and 32G of ram. The newly expanded 2540 array will have enough space to hold us for a few years. It is currently 3.7TB, using 2.6 of that. When expanded, it will be about 5.8TB.
My mission is to move all of the temporary tablespace and other data files (about 1 TB) and the exports (1 TB) to the newly expanded 2540. We will keep the space (2.1 TB) allocated on the 3511 attached to the new server, but it will be used ONLY for recovery-related files; rman backups, flashback logs, archived logs, etc. My goal is to keep at least two full rman backups in that space, along with all the necessary archived log backups. We are supposed to get everything off of the old SAN. So, there will be a lot of file shuffling, nothing new for this shop.
My plan would be to install 10.2.0.3 (same exact version) on the new server, then hook it up to the existing storage arrays. (My boss thinks that will reformat all of the disks on those arrays, but I don't think that is necessarily true. I believe it is possilble to mount each file system on those arrays to the new box, so long as they have been unmounted from the old one. Then again, I am not a Unix Admin)
Next, I would startup-mount the database, move the necessary files to the 2540 using Oracle and Unix commands, then shut down the db. Then, I would install 11gR2 with all patches on the new server, and upgrade the database manually, in place.
If my boss is right and connecting the new server to the existing arrays means re-initializing them, he asked if we could use our last RMAN backup to restore the database in the new environment. I said if we were still running 10g at that time on the new server, and all the file systems were identical, that should be possible. However, I should note that we do NOT use an RMAN catalog (RMAN uses the controlfile). We have no place to put an RMAN catalog. I have never even had a place to test doing a restore with RMAN.
If anyone out there has been through a migration to a new server along with an Oracle upgrade, I would appreciate any ideas on the best way to go about it.

Hi,
Its not recommended to upgrade OS and Database same time. I would recommend :
1) Migrate database from Old Server to new Severs.
-> Install OS, packages, patches, create users, groups, mount points and configure kernel parameters as required.
-> Restore $ORACLE_HOME, inventories, mount all data partitions on same mount points similar to old servers
-> Perform relink for all oracle home binaries using command relink all command.
Refer tech notes:
http://download.oracle.com/docs/cd/B19306_01/install.102/b28053/toc.htm
*Is It Necessary To Relink Oracle Following OS Upgrade? [ID 444595.1]*
*How to Relink Oracle Database Software on UNIX [ID 131321.1]*
2) Then perform an upgrade for your database.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10863/toc.htm#i1011296
http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/toc.htm
Hope helps :)
Regards,
X A H E E R

Help...downloaded new version of itunes...and now I cannot connect

I just downloaded new version of itunes and now I cannot connect to the itunes store...I get a message that says..."Itunes cannot connect to itunes store. the network connection timed out."
ran diagnostics here are the results... if anyone can help...
Microsoft Windows Vista Home Premium Edition (Build 6000)
Hewlett-Packard Presario F700 (GR967UA#ABA)
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.0.31
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D3C70EE5E29DDAC2
Current user is not an administrator.
The current local date and time is 2009-06-09 23:19:03.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce Go 6100
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {C07101F5-89CB-4921-9239-F59263AF4FAA}
Description: Broadcom 802.11b/g WLAN
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Jun 09 22:30:17 2009
Lease Expires: Wed Jun 10 22:30:17 2009
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {33E3719A-76B1-48B1-9F31-BD3CBF2DBDDA}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2009-06-08 09:41:24.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.1),
E: TSSTcorp CD/DVDW TS-L632M, Rev 0A17
Audio CD in drive.
Found 1 songs on CD, playing time 04:24 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
** iPod/iPhone Connectivity Tests **
iPodService 8.2.0.23 is currently running.
iTunesHelper 8.2.0.23 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
iPod nano (Second Generation) running firmware version 1.1.1
Serial Number: 7J651R7ZVQ5
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

Is there a way to view the new product notifications after installing the application?

When you install LabWindows/CVI or any other NI application you may receive new prduct notifications containing critical warnings or any other type of notifications. For CVI 2009 a critical warning is displayed suggesting to download and install a patch. In my case I chose to ignore the warning and continue with my installation without downloading the patch or creating a copy of the download link first.
After I finish installing I wanted to download the patch but I realized there is not an easy way to display the new product notifications from LabWindows/CVI.
My only options at this time was to search under the online support page or re-run the installer to get the link.
I think that it would be nice to have a menu item under help->web links->new product notifications that would take you to the list of notifications for your application.
If you know of an easy way to access the new product notifications from LabWindows CVI, please let me know. Am I missing something?
Regards.

Hey Antonio,
That's a good suggestion, and it's something that we're already planning on addressing in the next release, probably via a service that you can use to view information about patches and notifications -- not only the ones that were known at the time that you installed, but also ones that might have come into existence since then.
In case you're still looking for the link to that CVI 2009 notification, you can find it here.
By the way, my world cup sympathies to you -- your guys were robbed.
Luis

I have a PC desktop and an iPad. I have a large library of PDF documents on my desktop that I would like to sync with my iPad. I would like to be able to download new PDF's and make edits on existing PDF's on either device and have those edits and new P

I have a PC desktop and an iPad. I have a large library of PDF documents on my desktop that I would like to sync with my iPad. I would like to be able to download new PDF's and make edits on existing PDF's on either device and have those edits and new PDFs synced to the other device. I would also like to have my library available on the iPad even if there isn't a wifi connection (i.e., not on the cloud). Is that possible. I don't mind if I have to purchase a separate product or a product upgrade ect.

You can't use an external hard drive like you would with a computer.
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
When you first connect the USB flash drive, you will only see thumbnails of the pics on the iPad; you have to import the pic file to see the full size. With your large library of pics, you will have to do this repeateably and then delete pics so you don't exceed your memory capacity.
 Cheers, Tom

** 6i Download problems - Product Management speaks **

Firstly on behalf of the 6i Product Management team let me appologise for the problems you have been experiencing with Technet and specifically with downloading 6i.
I watch this forum and answer questions time permitting whenever I can, this forum (along with comp.databases.oracle.tools and ODTUG) are monitored by Product Management.
You need to understand that Oracle is a very big company and that getting all the little parts to work seamlessly together sometimes doesn't work as well as it should, so please be assured that Tools PM is working as hard and as fast as it can to ensure that 6i is available for you to download.
I have made enquiries today to find out what is happening at Technet. This is a division of Marketing based out of the US HQ, the PM teams have no responsibility for the management or maintenance of this site, we merely monitor mail lists and post our new software when complete.
I am waiting for information on the action plan to resolve the performance and download problems being experienced by the Developer community.
In response to some of the comments posted about downloading
It is obvious that 6i has been out for a WHILEActually this is not true, it has been available for download for a while, but not orderable..
Product Release Point Dates:
(1)
Release to MFG - 24-MAR-00 (This date is used by engineering and is the start of the 16-week period for the 1st patchset.) THE PRODUCT IS NOT ORDERABLE YET.
(2)
Release to PRG - 14-APR-00 (This is the M&D hand-off date for the Tools CD Pack.) THE PRODUCT IS NOT ORDERABLE YET.
(3)
Between 6:00PM PST and midnight 27-APR-00 - R6i, Windows, was added to the Oracle Store and officially orderable.
I have seen many posted messages, iTARS, etc referencing the availability of downloading forms updates, availablity of getting patchesAs you will see from the information above, this is not possible, patch one for 6i will not be released until 16 weeks after 24-MAR-2000
How much do we have to pay and who do we have to kiss to get a freakin update from Oracle? As the author of this comment has a support contract, they will know that you do not automatically get updates for products for which you hold licences. You merely need to order the latest version of the CD. Your support Account Manager will be able to advise you how to do this.
Once again, please be assured that we value your time, effort and feedback and that we do watch this forum with great interest.
I hope you found this information useful.
Jason Pepper
Senior Product Manager
Oracle Enterprise Internet Tools

As an update on the OTN performance problem I talked about earlier, I got some info from Global Ops
Customers are trying to download software from ftp.oracle.com, a server managed by the datacenter. The server is actually 2 servers (mirrored), with 1,400 connections (700 per machine). Bottom line is that ftp.oracle.com doesn't have enough connections to support the number of users trying to download Oracle products each day. Approval has been received for a dedicated OC3 pipe to the ftp server; it's believed this will boost the current capacity to 4-5 times what's there today.
Other improvement measures are being investigated.
Whilst this is being resolved, please consider ordering the CD which is free. I have just tested this and it worked for me ;)
Jason Pepper
Oracle Enterprise Internet Tools

Replicate Delta download of Product Categories Error

Hi
Running Sudo-Extended classic. I have replicated product categories from the backend into SRM successfuly. Now I need to alter 20 P.Categories.
In R/3 I coped the category, changed it and saved it. eg from 1200000 to 120000. Now I am replicating this new P.Category back into SRM.
R3AR2 to create delta download for 2 tables T023 and T023
R3AR4 to replicate the file above, Source R/3 and Target system is CRM/SRM..
My issue is I dont see anything in R3AM1.
Also whe I run SMQ1 I see my delta request but is has a status:SYSFAIL the issue seems to R/3.
Question:DO i have to delete my old P.Categories in SRM frist? It wont allow me coz they were created in R/3.
My SMQ1 and SMQ2 are clear before i began all this.
I try SM59 and my RFC seems to be working??
ANY iDEAS out there????
NO P.Categories seem to be comming in from R/3
cheers
alex [email protected]

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
BR,
Disha.
Pls reward points for helpful answers.

Downloading older product of Adobe Photoshop Elements

Hello! I recently bought a new computer and wanted to reinstall Photoshop Elements 12 with my serial number. However, since only13 is available, I went to the downloading older products page. Upon downloading the elements 12 folder, I dont understand how to install it.Could someone walk me through this?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I am having trouble downloading new update via my computer, PLEASE HELP!!!

I have tried downloading the new upgrade (ios6) via my computer(iphone plugged in) but it seems to take so long to do this. is there an easier/quicker way? I tried again this morning and it got half way through and it said my connection timed out yet my internet was still going!!
i am extremely NOT tech savvy so any help needs to be "dumbed" down(lol)
Could someone PLEASE HELP ME?????

Here is the place to find the CS5 installers: Download CS5 products
Benjamin

Hi i have problem with my mac os x10.5.8 i cant't download new upload ?and the problem is that i can't found my app store on my mac .any help plz

hi i have problem with my mac os x10.5.8 i cant't download new upload ?and the problem is that i can't found my app store on my mac .any help plz

If you can... you need to Upgrade your OS X to 10.6.8
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs > http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

Help! How do I download my product if my laptop doesn't have a CD drive?

Hi! I purchased Adobe CS6 Design Standard at the electronics store at my University. I followed the necessary instructions to get my serial number. However, I'm confused about my next step for downloading my product since my windows laptop doesn't have a CD drive. Help?

Hi there,
Happy Christmas and Happy New Year..
Since your PC/Mac doesn't have a CD/DVD drive, you can go ahead and download the trial version and use your serial number to convert it into a full version. You can find the trial from the below URL:
http://www.adobe.com/cfusion/tdrc/index.cfm?product=design_standard&loc=en_us&promoid=JUEE T
You can also take a Back-up of the trial version for the future installation.
Regards,
Jairaj

After download of product got error (49) updating failed?

New download and got an error that updating failed?

Benjamin.....they are never going to reimburse me for the program that I bought at Wal-Mart.....I just wanted an Icon on my computer to edit my pictures.....I have spent two days trying to install this program and so unhappy....I have yet to see the actual photoshop editing....I keep getting that Creative Cloud....I don't want that....can you help me? I am an older lady and frankly don't understand all this cloud stuff.....Please please help me. I would love to be refunded, but just the program would be nice. Thanks, Lou Ann Yarnell
From: Benjamin Root Photography <[email protected]>
To: Lou Ann Yarnell <[email protected]>
Sent: Wednesday, April 22, 2015 10:18 PM
Subject: after download of product got error (49) updating failed?
after download of product got error (49) updating failed?
created by Benjamin Root Photography in Photoshop General Discussion - View the full discussionYou'll find details on cancellation and money-back here: https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html This is a question for the Adobe Creative Cloud forum. A community moderator should find and move this thread for you. You should get some valuable help over there if you decide to do some troubleshooting before canceling.. They've been seeing quite a few of these problems lately. Either way, I wish you the best! Benjamin If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7468730#7468730 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7468730#7468730 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop General Discussion by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Downloading new product

Similar Messages

Maybe you are looking for