DTR unavailable

Hi,
I am facing this issue for quite some time. When i login to the DTR using the browser it shows that it is running and i am able to view the contents.
However when i login using NDS i get a message DTR unavailable. Ping to server failed returned 500 Internal server error.
This occurs when the J2EE server is restarted and goes away automatically at times.
Is it that some service related to DTR is taking a lot of time to start.
Please give your suggestions as this has been bugging us for quite some time.
Regards
Sidharth

Hi,
These links should help you:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/a6de3f68d48f15e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b0/a6de3f68d48f15e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b9/b4de3f68d48f15e10000000a155106/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b9/b4de3f68d48f15e10000000a155106/content.htm</a>
Akshatha

Similar Messages

  • DTR: Service Unavailable

    Hi,
    I am developing WD application under NWDI (Netweaver CE 7.2), track is configured and worked fine until today, but now I've got an error message while trying to checkout file:
    Ping on server 'http://<host>:50300/dtr/' returned: 503 Service Unavailable
    Server is running, I can access DTR via browser with "http://<host>:50300/dtr/", everything seems to be fine, but NWDS keeps showing errors: 503 Service Unavailable.
    Any ideas?

    Hi Ilya Karnaukhov,
    Please go through the below mentioned procedure and provide me the results.
    1) Open the below mentioned DTR URL
    http://<host>:<port>/dtr
    If the above Link is not accessible, then it will be giving some error trace.
    Please provide that entire trace to me, I will analyse it.
    2) DTR basically runs by the below mentioned standard service.
    tcdtrenterpriseapp(sap.com)
    that is contained inside DI_DTR Software Component.
    3) To Check whether this services is running or not, follow the below mentioned procedure.
    Goto Netweaver Administrator by opening the following URL...
    http://<host>:<port>/nwa
    Operations Management >> Systems >> Start & Stop >> Open Java EE Applications Tab
    In the Name column serach for "tcdtrenterpriseapp"
    Check the status column and find out whether it is running or stopped.
    4) If the services is stopped then you will have to manually start the service with the option
    On All instances and "Started" as initial State.
    If the service "tcdtrenterpriseapp" is running fine then,
    You need to check other services that are responsible for running CMS and CBS are available or not.
    Let me know about your findings.
    Regards,
    Shreyas Pandya

  • DTR Develpoment Configuration Error

    When I try to connect to DTR using dtrshell I get the following message
    >Initializing...
    >This may take a few seconds. Please wait...
    >Connecting to client "User1"
    Ping on server http://localhost:50000/dtr/ returned: 500 Internal Server Error
    The server http://localhost:50000/dtr/ is unavailable
    The server http://localhost:50000/dtr/ is unavailable
    >Initialization Failed.
    I did try to access using the browser I got this error
    Application error occurred during the request procession.
    Details: <b>Exception:</b>
    javax.servlet.ServletException: WebdavServlet.init() failed : com.tssap.dtr.pvc.repository.InitializationException
    at com.tssap.dtr.server.servlet.WebdavServlet.init(WebdavServlet.java:332)
    at javax.servlet.GenericServlet.init(GenericServlet.java:258)
    at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:335)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:345)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
    at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
    <BR><BR><b>Root cause:</b>
    com.tssap.dtr.pvc.repository.InitializationException
    at com.tssap.dtr.pvc.repository.RepositoryManager.initAll(RepositoryManager.java:233)
    at com.tssap.dtr.server.deltav.impl.Repository.initializePVC(Repository.java:508)
    at com.tssap.dtr.server.deltav.impl.Repository.initialize(Repository.java:675)
    at com.tssap.dtr.server.deltav.impl.Repository.initialize(Repository.java:650)
    at com.tssap.dtr.server.servlet.WebdavServlet.initializeDeltaV(WebdavServlet.java:411)
    at com.tssap.dtr.server.servlet.WebdavServlet.init(WebdavServlet.java:325)
    at javax.servlet.GenericServlet.init(GenericServlet.java:258)
    at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:335)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:345)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
    at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
    Caused by: java.lang.NullPointerException
    at com.tssap.dtr.pvc.util.guid.GUIDProvider.parseResponse(GUIDProvider.java:114)
    at com.tssap.dtr.pvc.util.guid.GUIDProviderProxy.getGUIDs(GUIDProviderProxy.java:49)
    at com.tssap.dtr.pvc.util.guid.CentralGUIDGenerator.createGUID(CentralGUIDGenerator.java:88)
    at com.tssap.dtr.pvc.basics.transaction.Session.<init>(Session.java:98)
    at com.tssap.dtr.pvc.basics.transaction.Session.<init>(Session.java:107)
    at com.tssap.dtr.pvc.basics.transaction.TAClassFactory.createSession(TAClassFactory.java:58)
    at com.tssap.dtr.pvc.basics.transaction.SessionManager.createSession(SessionManager.java:137)
    at com.tssap.dtr.pvc.repository.RepositoryManager.initAll(RepositoryManager.java:215)
    ... 21 more
    Can anyone tell me how to get this working

    Hi Ameya,
    please try the following:
    - stop the J2EE engine
    - login to the database and delete content of the PVC_CENTRSRVCONFIG table:
       DELETE FROM PVC_CENTRSRVCONFIG
    - startup the engine and wait until all applications are started
    - check if DTR is up and running.
    In case the problem is still not solved please create a CSN ticket.
    regards
    Sasa

  • Connect DTR by SSL

    HI all,
    I got some questions about connect DTR by SSL.
    Firstly, can DTR command line too connect DTR by SSL? I tried but got following errors:
    ====================================================
    >Connecting to client "DTR_HTTPS"
    Ping on server https://192.168.3.6:50101/dtr/ failed (maybe server not available
    ) - Unable to open connection.failed to retrieve SSL socket [SSL provider does n
    ot support certificates]..
    The server https://192.168.3.6:50101/dtr/ is unavailable
    The server https://192.168.3.6:50101/dtr/ is unavailable
    >Initialization Failed.
    ====================================================
    Secondly, anyone tried to connect DTR in NWDS by SSL successfully? I tried but got the following errors:
    ====================================================
    Ping on server https://192.168.3.6:50101/dtr/ failed (maybe server not available) - Unable to open SSL connection to host "192.168.3.6:50101". Peer sent alert: Alert Fatal: handshake failure..
    Failed to log in (status: -1) on server https://192.168.3.6:50101/dtr/
    ====================================================
    I can access DTR by using IE through SSL, that is access the link https://192.168.3.6:50101/dtr/, but fail to access via DTR command line and NWDS.
    Hope someone can help.
    Thanks & Regards,
    Kelvin

    Hi Kelvin,
    Did you get this problem solved? I am also getting this problem now. Could you please let me know, if you solve this issue already.
    Thanks
    Prem

  • SmartWebPrinting.msi feature I am trying to use is on a network that is unavailable how do i fix it?

    I have bee having problems with SmartWebPrinting.msi it keeps loading up everytime i try to get on the internet or open one of my programs on my computer these are the mesges I am recieving from it: 1. the feature you are trying to use is on a network resource that is unavailable. 2. Enter an alternate path to a folder containing the instalation package 'SmartWebPrinting.msi in the box below. 3. An installation package for the product SmartWebPrinting.msi cannot be found try the installation again using a valid copy of the installation package SmartWebPrinting. msi. I am unable to load a web page correct and pages are missing and I cannot view web pages. and it wont go away and i put in the cd and it still keeps saying the same thing What do I do?
    Thank you

    Hi there,
    Try uninstalling Smart Web Printing using the instructions in this document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&cc=us&dlc=en&lc=en
    1.  Expand the + sign next to:  How do I upgrade from HP Smart Web Printing to HP Smart Print
    2.  Follow the steps under:  Step one: Uninstall HP Smart Web Printing software (and then expand the + sign next to the operating system you are using)
    You can then install HP Smart Print (which has the same features as Smart Web Printing) if you have a need for this software (following the instructions in this document).
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

  • Reg: Open and Closed Activities in DTR

    Hello Guru's,
    I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
    And when does an Open Activity changes to Closed Activity?
    And why does an Empty Open Activity gets created?
    How does the Open Activities effect the Performance of the system?
    In NWDS what is the significance of the Public Part and the dcdef xml files?
    Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
    Appreciate the Help.
    Thanks & Regards,
    Pramod

    Dear Pramod,
    Activity in general can be considered as the wrapper of your changes.
    While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
    Some Definitions:
    Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
    Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
    Open Activities
    These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
    Exmple:
    1) Suppose you have made some modification in "File A" which is associated in Activity-1
    2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
    3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
    4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
    Closed Activities
    These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
    Example:
    1) In the same example explained above assume that we now Check-in the Activity-1.
    2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
    3) Now the changes that were present in Activity-A are also available to other developers too.
    Open Activity and Performance
    1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
    2) In the local file system, the meta data is stored in the .dcdef file in the _comp
    subfolder.
    3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
    Every component (DC) is defined by a set of files, stored and versioned together with the
    component in the repository.
    u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
    description and component type, the parent component (if there is one), a list
    of child components (if there are any), a list of dependencies, links to the component
    sources, and the access control list. The .dcdef file must be stored directly
    in the _comp folder.
    u2022 The folder _comp/def contains one file for each public part of the component,
    which carries the name of the public part with the extension .pp. This file contains a list
    of the development objects belonging to the public part and an access control list for
    this public part.
    Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
    content display of the Repository Browser or with any text editor. However, this is
    not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
    Developer Studio.
    In exceptions, you can manually repair the .dcdef or a .pp file of a component.
    Note that direct manipulations are dangerous and can render a component
    unusable.
    I hope you will get a clear picture now.
    Regards,
    Shreyas Pandya

  • Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

    error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
    I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
    Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
    pattern is like:
    success
    success
    success
    success
    Error
    success
    success
    success
    success
    success
    success
    error
    success

    Hi,
    As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
    the log files in the server side:
    https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
    Best regards
    Patrick Liang
    TechNet Community Support

  • Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

    Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet."   I am obviously connected to the internet since you are reading this.
    I tried upgrading permissions but it did not help!?  Can anyone tell me what is wrong?  Thanks

    Try
    Reboot the computer, see if that fixes it.
    Then try:
    Backup your files off the computer (not TimeMachine) and disconnect
    Hold c boot off the 10.6 disk and simply reinstalling OS X
    Log in and update to 10.6.8
    c boot off the 10.6 disk again and use Disk Utility >Repair Disk
    reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

  • Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

    Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
    == URL of affected sites ==
    http://www.hotmail.com

    We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

  • I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    iTunes.msi
    Perfect, thanks.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error when starting DTR Console on NWDI 7.31

    Hi Guys
    When starting DTR console from command line on a Windows 2008 OS, im getting the following error
    S:\usr\sap\NDI\SYS\global\com.sap.dtr.console>run
    S:\usr\sap\NDI\SYS\global\com.sap.dtr.console>java -Dhttp.readtimeout=0 -cp S:\usr\sap\NDI\SYS\global\com.sap.dtr.console\sap.com~tc~dtr~console~all.jar;S:\usr\sap\NDI\SYS\global\com.sap.dtr.console\sap.com~tc~dtr~cmdlineappfwk~all.jar;S:\usr\sap\NDI\SYS\global\com.sap.dtr.console\antlr-runtime-3.0.1.jar com.sap.dtr.console.DTRConsoleApplication
    Exception in thread "main" java.lang.RuntimeException: com.sap.dtr.cmdlinefwk.CommandLineException: Validation of the examples for the command "Discard" failed.
    The example "discard -col  -cip/collision/dce6250e4fd911dc81e400199905d653_3_b4c044e04fd511dccef000199905d653_b4c044d84fd511dca33b00199905d653_open_PredSucc" contains a command that is not valid against its specification.
            at com.sap.dtr.console.DTRConsoleApplication.registerCommandSpecs(DTRConsoleApplication.java:207)
            at com.sap.dtr.console.DTRConsoleApplication.initialize(DTRConsoleApplication.java:156)
            at com.sap.dtr.console.DTRConsoleApplication.<init>(DTRConsoleApplication.java:137)
            at com.sap.dtr.console.DTRConsoleApplication.main(DTRConsoleApplication.
    java:311)
    Caused by: com.sap.dtr.cmdlinefwk.CommandLineException: Validation of the examples for the command "Discard" failed.
    The example "discard -col -cip /collision/dce6250e4fd911dc81e400199905d653_3_b4c044e04fd511dccef000199905d653_b4c044d84fd511dca33b00199905d653_open_PredSucc" contains a command that is not valid against its specification.
            at com.sap.dtr.cmdlinefwk.CommandLineApplication.addCommandLineSpec(CommandLineApplication.java:115)
            at com.sap.dtr.console.DTRConsoleApplication.registerCommandSpecs(DTRConsoleApplication.java:204)
            ... 3 more
    Caused by: com.sap.dtr.cmdlinefwk.CommandNotSupportedException: Command 'discard' is not supported
            at com.sap.dtr.cmdlinefwk.support.parser.DefaultCommandLineParser.parse(DefaultCommandLineParser.java:57)
            at com.sap.dtr.cmdlinefwk.CommandLineApplication.addCommandLineSpec(CommandLineApplication.java:107)
            ... 4 more
    Any idea what is missing? Im seeing the command line its showing S:\usr\sap\NDI\SYS\global\com.sap.dtr.console\antlr-runtime-3.0.1.jar, but this file is not present
    Thesefiles are at  OS level
    Regards!

    Hi,
    i have also problem with launching DTR console. I followed this article for enabling it:
    Starting Command Line Tools - Using the Development and Production Infrastructure - SAP Library
    But when I try to start the console via Run, I receive this error:
    eclipse.buildId=unknown
    java.version=1.6.0_38
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en
    Framework arguments:  -application com.sap.di.cltools.dtrshell
    Command-line arguments:  -application com.sap.di.cltools.dtrshell -data D:\IDE\IDE7.31SP12\eclipse\workspace/../runtime-New_configuration(2) -dev file:D:/IDE/IDE7.31SP12/eclipse/workspace/.metadata/.plugins/org.eclipse.pde.core/CBS Command Line Tool/dev.properties -os win32 -ws win32 -arch x86
    Error
    Wed Oct 29 15:53:05 EET 2014
    Application error
    java.lang.NullPointerException
    at com.tssap.dtr.client.commandline.DTRShell.main(DTRShell.java:86)
    at com.sap.di.cltools.internal.DtrShell.start(DtrShell.java:32)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    at org.eclipse.equinox.launcher.Main.main(Main.java:1287)
    If you have solution to this problem, please give me advice.
    Thanks!

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • Unable to print from MS Word: "The Directory Service is currently unavailable"

    Hi! I hope you can help me. Please note that I have a Windows XP computer (Home Edition, Version 2002, Service Pack 3, 32-bit). When I initially installed a Brother printer (model# MFC-J475DW) in Dec 2013, I had no problems printing documents. My problems
    started about 2 days ago. I got an error message after I opened a MS Word document (.doc) and clicked the Print button to print a document. The Printer "Name" field was empty.  I clicked the dropdown box in that window and saw 3 options:
    1 - Brother MFC-J475DW Printer
    2 - Brother PC-FAX v.3.2
    3 - PaperPort Image Printer
    When I selected "Brother MFC-J475DW Printer," a Microsoft Word dialog box appeared, saying the following:
    "The printer has not yet responded, but the Microsoft Office program may be able to proceed without printer information. Do you want to continue to wait for the printer?"
    I can either click on a Yes button or a No button. Either way, I'm brought back to the Print page. When I click on the OK button to start printing, another error message appears:
    "Windows cannot print due to a problem with the current printer setup. Try one or more of the following:
    *Check the printer by printing a test page from Windows.
    *Make sure the printer is turned on and online.
    *Reinstall the printer driver."
    I have a choice to click either OK or Web Help. I click the OK button to close the box, then return to the Print page. When I click on the "Find Printer..." button, the Find Printers window appears for a moment, then is replaced by this error message:
    "The Directory Service is currently unavailable"
    On Friday (Mar 21), when the error first occurred, I was able to print a letter in MS Word after un- and re-installing the Brother printer and its drivers. The problem reappeared the next day (Saturday). I don't want to do that every time to print a single
    page, so would you please recommend a solution?
    By the way, I am able to print a test page from the printer in Control Panel, and I can print from a Notepad document. Also, when I go to the Control Panel, select "Printers and Faxes," then right-click on the printer (Brother MFC-J475DW Printer),
    then select the Ports page, there's a check mark next to USB001 (not LPT1 or COM1). When I click on the "Configure Port..." button, I get this error message:
    "An error occurred during port configuration. This operation is not supported."
    Earlier today, I got a reply from brother.com's tech support (thanks to the 1 year warranty). They said the problem is on my PC, not their printer. However, they provided links to completely uninstall the printer, then reinstall it. I did just that, but
    the problem persists. I'll download OpenOffice.org's Office Suite to see if I can print documents with their software instead of MS Word. Until then, I await any suggestions.
    I hope this info is helpful. Thanks in advance for your help.

    I downloaded OpenOffice and am able to print documents (in particular, the same document I created in MS Word). I guess MS Word is to blame. I believe the issue is concluded, but I'd welcome any comments about the Active Directory, as I might have a problem
    with OpenOffice in the future regarding that.

  • Adobe Muse (2014.3) "Add Web Font" Function Not Working As Expected - Newly Added Fonts Become Unavailable Though Shown

    Hello.
    This has also been posted in the Community: Adobe Muse Bugs forum.
    I've been having some odd/irregular issues though they have now become fairly predictable in nature. The issue is in regards to Adobe Muse (2014.3) and the availability of web fonts provided through the applications "Add Web Fonts" feature. Once added they perform as expected but then become "unavailable." Full details below. I have been a Creative Cloud Complete subscriber for a number of years so am fairly familiar with the way in which the system works minus a few issues that have popped up now and then, this one included.
    System Info:
    Adobe Creative Cloud (Full Subscription): Version 1.9.1.474
    Adobe Muse: Version 2014.3
    OS X Yosemite: 10.10.2
    Here is a recap of what has been taking place. I'll detail the bug as best I can.
    1. Created new Adobe Muse project. Everything normal.
    2. Chose to add a new font through the "Add Web Fonts" function within Muse. A note, my Creative Cloud App is running/open at all times (in file synch mode).
    3. Chose new fonts using above. All seemed fine (see screenshots below).
    4. Fonts also were indicated as being "Synched" within Creative Cloud (screenshot below).
    5. As expected the two fonts were added to the list of available Web Fonts within Muse (first screenshot below - left). I added them successfully to my site. Well after a number of hours I went back to this same font selection menu within Muse and the fonts were still visible yet the sub-menu that one would expect showing various forms (i.e. Bold, Italic, etc) was not available. In a sense the font could not be chosen from the list even though the name is clearly visible (second screenshot below - right).
    Have no idea what may have been wrong. Saved Muse project, closed and reopened - nothing changed. Created new project - fonts still "shown" in menu but can't be used. Did find a vague description using Google of similar problem (different application) which recommended closing Creative Cloud Desktop App and reopening as one possible solution. This DID WORK initially yet the problem, though corrected for a period of time (few hours at most), would reappear again where one would again see yet not be able to choose from the two Web Fonts. Went so far as to uninstalling the Creative Cloud Desktop application and reinstalling. Still have not solved the problem.
    Any thoughts as to what this may be would be welcome. Restarting the CC app each and every time the fonts become unavailable is quite time consuming to my workflow.
    Thanks!

    Abhishek,
    Thank you for the reply. Wanted to comment on a few things.
    I reviewed the other post that you've referenced. Nothing unusual jumped out at me as something that I was not aware of. I'm running an older iMac that is in good working condition. 2.4 GHz Intel Core 2 Duo, 24" screen. I know this issue is fleeting, as I stated earlier typically can be corrected with a restart of the CC Desktop application (that I am always running at startup). I have not been able to determine that shutting down Muse corrects the issue. I would, at this time say it doesn't.
    I did open InDesign and see if the fonts in question, Open Sans and Open Sans Condensed, were present and usable. They were. The fonts are shown as being synched in my CC Desktop app window (even if they are not "installed" in Muse). That is expected but it may be a bug in how Muse brings in a font from those that are already synched to your CC account. I don't know enough about how that works to comment.
    And just to complicate matters, Muse seems to be working again, the fonts that is. I brought them back in and they are showing up in all locations (which there are actually three - see screen shots).
    First is primary text menu dropdown (to right of orange "Text").
    Second is if you click orange Text link. Another drop down menu appears.
    And lastly, the Text Panel to right of screen.
    I also wanted to add this extra bit of information, for what it is worth. When the issue arises and you do not get the sub-menu dropdown showing various styles of the font (italics, bold, etc.), one can use click on the missing font if you had used it previously and it is present in the "previously used font" list.
    Cheers!

  • Cannot log into DTR with Active Directory User

    Greetings,
    I have set up and installed JDI correctly.  I can log into /devinf, the cbs, cms and sld systems with no problem using both Administrator and my JDI.Administrator that I assigned to an Active Directory user.  I can log into the DTR using a user from the database (i.e. Administrator), however, when trying to access the DTR with an Active Directory user, I get the following message:
    500   Internal Server Error
      SAP J2EE Engine/6.40 
      Application error occurred during the request procession.
      Details:   Error [javax.servlet.ServletException: Group found, but unique name "businessUnit.all.guests" is not unique!], with root cause [com.tssap.dtr.server.deltav.InternalServerException: Group found, but unique name "businessUnit.all.guests" is not unique!].  The ID of this error is
    Exception id: [0012798F81680042000000090000165C0003FE9AA3C0B86B].
    This group exists in multiple domainshowever, this has not caused us any issues to date with our portal and other pieces of SAP WASit's only this DTR error. 
    Any help is greatly appreciated.
    Thanks,
    Marty

    Hi Marty,
    In the document available at the link enclosed below, there is a part that explains how to configure DTR so that it always uses "Unique-IDs".
    http://help.sap.com/saphelp_nw04/helpdata/en/20/f4a94076b63713e10000000a155106/frameset.htm
    It is mentioned that this is valid for LDAP, but the information is applicable for Active Directory as well.
    Regards,
    Manohar

Maybe you are looking for