Dump while doing goods issue against order with movement type 261
Hi Team,
We are integrating Asset management process along with the goods issue against the order which is created with a business partner for movement type 261.
when we try to complete the process the system gives us a dump as described below.
please look through the dump and advice for the same.
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
System error in the FI/CO interface
Long text of error message:
Diagnosis
Updating of the FI/CO interface was called with object type "MKPF"
yet the checks were run for object type "AMBU".
System Response
Checking and updating must be for the same object type.
Procedure
It has to do with a system error from the calling applications.
Technical information about the message:
Message class....... "RW"
Number.............. 103
Variable 1.......... "MKPF"
Variable 2.......... "AMBU"
Variable 3.......... " "
Variable 4.......... " "
rigger Location of Runtime Error
Program SAPLMBWL
Include LMBWLU21
Row 62
Module type (FUNCTION)
Module Name MB_POST_GOODS_MOVEMENT
46 IF xmkpf-xabln IS INITIAL. "note 434093
47 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
48 ENDIF. "note 434093
49
50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
51
52 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
53 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
54 EXCEPTIONS
55 error_message = 4.
56 * As soon as we have started to put things into UPDATE TASK, we must
57 * ensure that errors definitely terminate the transaction.
58 * MESSAGE A is not sufficient because it can be catched from
59 * external callers which COMMIT WORK afterwards, resulting in
60 * incomplete updates. Read note 385830 for the full story.
61 IF NOT sy-subrc IS INITIAL.
>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
63 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
64 * MESSAGE A263.
65 ENDIF.
66 * Optische Archivierung
67 * Spaete Erfassung mit Barcode
68 * Redesign of barcode handling -> note 780365
69 PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
70 xmkpf-mjahr
71 barcode.
72
73 MOVE-CORRESPONDING xmkpf TO emkpf.
74 CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
75 EXCEPTIONS
76 error_message = 4.
77 MOVE-CORRESPONDING xmkpf TO emkpf.
ource Code Extract
ine SourceCde
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ELSE. "1245374
43 l_mem_id = 'MKPF-XBLNR'. "1245374
44 FREE MEMORY ID l_mem_id. "1245374
45 ENDIF.
Couple of notes are mentioned (385830, 780365 etc) and check whether these notes are applied. If so, check with the ABAPer and go through the source code corrections explained in the respective notes.
You may also go through the following notes
1) Note 386656 - FBV4: RW103 'System error in the FI/CO interface'
2) Note 388316 - RW103 "System error in the FI/CO interface"
3) Note 543463 - Inconsistent Posting in budgetary ledger and/or RW102/RW103
thanks
G. Lakshmipathi
Similar Messages
-
Problem in Material issue to WBS with movement type 261 Q
Dear Experts,
I have sceario where i have to make delivery from project.But when i am issuing goods to WBS with movement type 261 Q its showing following errors.Can anyone put some light on it.
Special stock 0001 Q AS0111 000000000000000015 of this material does not exist
Message no. M7076
Diagnosis
No special stock Q of the material (batch ) exists in storage location 0001 for AS0111 000000000000000015.
RegardsHello,
This is simple scenario. System is using 281 Q in CNS0. As you have procured through Q indicator WBS is mandatory in PO.
So when you will take GRN , it will be consider as project stock if quality check is not there else will go in quality first. Check MBBS report for this.
Now do CNS0 with reference to project number. So materials from project stock will get consumed when you will do PGI for CNS0 material document.
Your scenario is failing in this stage becasue system didnt find stock against particular WBS element.
Check this and revert.
Keshav -
User exit while doing Goods Issue
Dear Guru's,
I have the below requirement from my client,
They want an warning msg from the system while doing Goods issue, if the stock of certain material is goes below min stock level, so i spoke to my abaper to create user exit, but he is asking for some programs from MM side related MIGO. What programs we need to give him ? is that right ? pls suggest
Edited by: channabasappa kallapur on Jan 21, 2009 5:29 PMI don't believe you need a user exit for this .. USE OMCM and configure the availability check against the appropriate movement type
-
How to change the g/l a/c being used while doing goods issue using migo
when I pass a migo entry whilie purchasing material
, the entry goes through stock
stock (230000 a/c no) 150 dr
GR/IR (150000 a/c) 150 cr
when I issue material after reservation for which again migo is done
entry is
repairs to plant and mach (4800569 a/c) 175
stock (230000 a/c no) 175
The stock a/c is debited and credited due to t.code obyc where for inventory posting I have assigned a/c 2300000 for valuation class assigned to material.
now I want to have a/c no 4800689 in place of 4800569. how can i change that.
that is when I issue material from stock this should be debited to 4800689 instead of 4800569. please provide t.code to change the gl from 4800689 from 4800569
full points will be awardedcontinuing my issue is it possible to that we donot have to change the gbb and vbr and still we can have the desired results.
that is we are able to use different gl for debit while doing goods issue from a single stocked material
or we want to have this result
1. repairs to p&m 1000 dr
stock of cement a/c 1000 cr
2. repairs to building 2000 dr
stock of cement a/c 2000 cr.
3. construction 3500 dr
stock of cement 3500 cr
we donot want to change the GBB and VBR every time or change the GL a/c while doing reservation.
is there any third option where we get the desired result without changing or entering the g/l manually
if there is please let me know the t.codes -
Daear All,
while doing goods issue getting the error message : Acct. 200510 for trans./event key BSX, postable directly.
the same in goods receipt also.
please help me on this.
Best Regards,
Venkat.In FS00 ,Please TICK 'post automatically only' for the GL 200510.
Regards
jabeen -
Goods issue against reservation with interchangeable part using MB11/MIGO
Hi
Do anyone know how to make a goods issue against reservation with interchangeable part using MB11/MIGO.
Meaning reservation is made with Part A, goods issue is make with Part B (interchangeable to part A).
Enhancement pack 4 is having some issue with MB1A, we are attempting to do a work around with MB11 / MIGO.
Please assist.
Thanks!!
Regards,
ClariceYou can view report from MB25 ,it will gives you reservation list with reference network number.
Select option in MIIGO as GI > Reservation > Mvt.281. or you can make the entry from MB1A with Mvt .type-281
Regards,
Sandesh Sawant -
Error in BAPI_GOODSMVT_CREATE with movement type *261' after posting
Hi All,
After sucessfull posting of BAPI_GOODSMVT_CREATE with movement type *261' .
After posting ,while checking In mb51 document exists for it but checking in mmbe stock not reduced from resisticted stock.
Can you kindly tell the import parameter to be filled to over come this error.
Thank you.
Thanks,
AMSHi Himanshu/ Tejaswini Khante / Madhu,
Thank you all for your kind reply.
@Himanshu....I have tried with LWA_ITEM-STCK_TYPE = BLANK, Still it didnt work.
@Tejaswini Khante ...I checked the MMBE tcode, all the stocks are in 'Unrestricted use' only. The quality inspection, reserved fields are all blank. The materials are not Batch managed.
@Madhu...Yes, i discussed with the Functional, yet to find a possible solution.
Thanks & Regards
Rajesh -
Order Type wise GL Account While doing Good Issue.
Dear All,
Good Day,
We have Different types of Plant Maintenance Order , now when we do Goods Issue against the order we need specific GL Account based on Order type.
Example: Preventive Order should need XXXX GL Account
Corrective Order Should need YYYY GL Account.
thanks in advance.
Best Regards,
KSKhi
when any material is issued against the order the G/L account will capture according the valuation class specified in the material master record and the corresponding cost element assigned to the valuation class.
once you get the material and after the work is completed you can settle the cost to the G/L account provided the settlement profile allows that.here you can maintain different settlement profile to the each order type
regards
thyagarajan -
Account Detrmination for Goods Issue against Order
Dear All,
We have a requirement where goods issued against reservation created through plant maintenance order should hit repairs & maintenance account instead of default account such as consumption stores and spares.
Can any changes be made in configuration so that the default account can be changed either while saving plant maintenance order or can the default be overwritten when material is issued through MB1A against reservation.
Useful answers will be rewarded with points
Regards
Milind NairDear
Your knowldge iam adding the points
In materail master check the Valuation class 4 digits (ex: 2010)
is assigned in material master . The same material will be used in many places , this valaution class depends Production created by Fi.
This same will have assigned in G/L at OBYC t code. Here we assign as automatic posting. The same G/l account has given as automatic posting in G/L t code FS00.
In obyc has many process example for goods issue it will come as BSX. costing difference PRD.
your materails type is ERSA these types may bes used many plcaes other than Pm . If clinet interests you can assign valuation class with seperate G/l account for PM
All the G/L , costing docuemnts will appear while doing migo (mb1a) 261 movements as per your obyc seetings
Tell requirements with FI/MM -
Goods Receipt through internal order with movement type 262
Dear Friends,
some of our users making entries like the following
1. created Internal Order
2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261)
3. Stock updated
i just want to confirm, we not issued like X material, even stock not available, we can make entries like the above, To receive X material from Internal order/ subcontractor using movement type 262.
kindly advice please if it is wrong then tell me the process.
Regards,
Rajesh GHI,
if we receive material from subcontractor what process we can do...
can you explain your issue exactly what problem you have at your end .
I think you want to take subcontracting material inside which is not in sap system now,it may finished material or it may component.If you don't want to show this material as at vendor now
then you can try movement type 501 or through physical inventory t-code MI10
Regards
Kailas Ugale -
Error while doing Good Issue for Production Order using BAPI
Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = zptp_s_rf_migo_261-aufnr
IMPORTING
output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gs_header
goodsmvt_code = gs_gmcode
IMPORTING
goodsmvt_headret = gs_headret
TABLES
goodsmvt_item = gt_item
goodsmvt_serialnumber = gt_serial
return = gt_return.
Thanks in Advance.hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM -
Batch Determination while doing goods issue 201
Hi MM Experts
i have setup batch determination , and assign procedure to movement type 201 also copleted reamaining activity
now when i am doing godds issue batch is not coming automatically.
please help me out to complete process
Regards
anubhav
Edited by: anubhav parashar on Jan 21, 2011 3:24 PMhi ravi
i have created an class and charateristic ERSDA (Creation date) , also i have created 2 batches , also characteristic assigned to short rule also , now i want whoever batch created 1st should come at the time of issue -
Automatic Creation of MIGO for stock transfer order with movement type 351
I have used the BAPI - BAPI_GOODSMVT_CREATE_OIL to create the material document number. But the test ended with error "Goods movement not possible with mvmt type 351".
Is there any ways to eliminate the above error....
Friends need your help351 Goods issue for a stock transport order (without SD)
The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without an SD delivery. A goods issue for a stock transport order with SD delivery is posted using movement type 641 or 643.
The transfer posting is also possible for materials valuated separately.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators: E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant. -
REM- Planned order with Movement type 311
Hi,
I want to use movement type 311 along with planned order in MFBF but system is not allowing me.
Do I need to mention movement type 311 somewhere in configuration of planned order.
Regards,
Samir WadajkarDear
Basically Movement 311 will be used for Material Staging.Material Staging can done with reference to the Material or with reference to the Planned Order etc...
You can do the following with MF60:
1. Direct stock transfer : You must select Staging type (Storage location level)
To use direct stock transfer, you must maintain an issue storage location for each component in the BOM (or in the material master record or the production version). The system only displays those requirements for which you have defined an issue storage location
2. Stock transfer reservation : You must select Staging type 1 (Storage location level)
The system then automatically displays the storage location view of the pull list. The system also only selects the corresponding requirements.
In Global Settings, you must adopt the default settings and you must also select Stock transfer reservation.
I hope you must have maintained the Customization Setting for Stock Determination Strategy with reference to your plant with 311 movement.
Further details refer below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/a5a8d04adc11d189740000e8322d00/content.htm
Hope this is clear to you
Regards
JH -
Stock transport order with movement type 643 - post to COPA
Hello SAP gurus,
We use movement type 643 to post good issues for stock transport order (intercompany process). The delivery type is NLCC. We recently implemented account-based COPA. At the time of post goods issue, cost of goods sold should be posted to COPA, but it didn't. Could someone help me figuring out how to push PGI to COPA for stock transport order? Thanks in advance.
Regards,
Cassandra WongThe reason that PA segment is not populated in the good issue for STO is because the cost element of the COGS account was set to "01" instead of "12". I changed the cost element category and the PA segment is populated correctly.
Maybe you are looking for
-
How to Configure the Buttons on the QAF for Mobile UI Screens...
Hi Experts, I am in a serious need of help from the experts who already designed the Mobile UI screens. I have built a add-on where now we are looking this add-on to be available to use in mobile applications also. Now here what I did is I have devel
-
How Long Does It Take To Get BT Infinity & Telepho...
Hi I wanted to phone up BT and ask this question, but I couldn't get past "We Need The Phone Number This Enquiry Relates To Before We Can Proceed". Err, it's a pre-sales enquiry, I don't have a BT phone number. Anyway... I am moving into a new house
-
Powermac G4 (OS 10.4.11) won't boot past grey apple
1- My PowerMac G4 (running OS 10.4.11) won't boot past the grey screen with the apple. Any suggestions?
-
Hi, ALL! If you know how to remove the edges around the labels at the front panel then explain me, please end. I know how to do this in LabVIEW 4.x and 5.x but I don't know in LabVIEW 3.x. Where are examples in 3.x both with the edges and without the
-
Conversion from iTunes to standalone iBooks...
I am having a closer look at this conversion and I am extremely dissapointed! My library of 600+ books/PDFs on iTunes was carefuly and consistently labled and organized through iTunes "Get Info" editing interface. After the conversion it is all in sh