Dynamic Bin for delivery Transfer Order

Dear All,
We have WM implemented in our SAP landscape. We do the picking though transfer order created with reference to outbound delivery through LT03.
In this picking transfer order the destination storage type is 916 and bin is dymanic bin (which is the delivery number).
I have faced a strange issue yesterday where the destination bin is coming as $--1 or $--
2 etc instead of the delivery number.
This was working fine previously and even now its working fine except one day when i faced this issue.
Any pointers on this will be highly appreciated.
Thanks ,
Rohit

Hi Rohit,
Could you please check whether you have set the field LIPS-VGBEL
for the requirement type correctly.
IMG -> Logistic Execution -> Warehouse Management -> Interfaces ->
Shipping -> Define Shipping Control ->
Requirement Types of Delivery Documents
regards,
Ramana

Similar Messages

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

Table for the transfer order

hi,
 what is the table for the transfer orders?
thanks in advance..

Hi,
Create delivery via transfer orders:
Once the order is saved proceed through the following steps. The process assumes the item has values in the warehouse bin.
VL04 Delivery due list. Run the delivery due with your order number to create the delivery
LT03 Create Transfer Order. EG. Warehouse: 101 and enter. Picking background. Save
The Transfer order should now be saved. It now needs to be confirmed.
In LT03 go to menu option Transfer Order -> Confirm Transfer Order
Enter
Save
The transfer order is now confirmed.
VL02N Delivery change. EG: Edit the delivery to do the following Pack External customer material number = COO. External delivery number Waybill number. BOL Transport tag. Carrier Header partner SP (E.G. FXP). Tracking number = Packing Unit
Pls reward points.
Regards,
Ameet

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

BADI or EXIT for pick transfer order

Hi GURU ,
Can anyone please tell me the BADI or EXIT name for PICK Transfer order.
Now the line item is coming in the Article wise , But I want this in BIN wise .
Please tell me the BADI or EXIT name where I can change the order of line item .
Edited by: Julius Bussche on Dec 16, 2008 2:29 PM

hi
you can try these customer exits
MWMTOAU1
MWMTOAU2
hope it helps
regards
Aakash Banga

ConfigureCombined invoice for Delivery and Order related billing items

Dear Guru's,
Please tell us what settings one have to do in copy controls (like for TAS "OR to F2" & TAN "LF to F2") as to Combined invoice for Delivery and Order related billing items.
Regards,
Sai

Hi Sai,
for TAS "OR to F2"
T-code-VTFA
Target Billing Type --"F2" and Source Document as "OR"
At header level you can select .
Copying requirements "001" Header/order related
Tick mark copy item number
At item Level you give
Copy requirements "028" Order related 3rd party item
Data VBRK/VBRP= 000
Billing quantity="A"
Pos/Neg quantity="+"
Price type="G"
and Save
2)TAN "LF to F2
Go to Tcode-VTFL
Target Billing type "F2" and source document as "LF"
In header details you give
Copy requirements "001" Header-order related
detr export dta="B"
Allocatio number="B"
Reference number="A"
Tick mark copy item number
In item details you give
Copy requirements"004" delivery related item
Data VBRK/VBRP="003" Single invoive"
Billing qantity="D"
Pos/neg quant="+"
Price type=G"
Price source"E"
Regards
Seegal

How to get data from ECC --- Sales Order,Delivery,Transfer Order & Invoice

Hi,
Good day.
I'm ABAPer and I need to get Sales Order,Delivery,Transfer Order & Invoice data from ECC. The said data will be displayed in the custom form that I need to create. How exactly do i get the said data above?
Can I get them in the tables avaialable in GTS? Where?
Or do I get the data directly in ECC? How?
Thank you very much!
Best regards.
Brando

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

Standard Extractor for Warehouse Transfer Orders

Hello Experts. Does anyone know if there a standard extractor for warehouse transfer orders (Tables LTAP/LTAK).
Thank you!

Hi Martin,
Thank you for this information. However, I cannot find these extractors when I execute RSA5. Does this mean that these are not available in our version? It seems to me that this should be available to us because our SAP Component Version is SAP EHP 1 for SAP NetWeaver 7.0 and this is what I see in the Business Content Documentation. Are we missing something? Thanks for your help.

WM - This screen is only allowed for manual transfer orders

hi
I am getting below when i am going to carry out the transaction LT06
"This screen is only allowed for manual transfer orders"
please help
Regards

then check at the very same place if you have entered an indicator for automatic TO.
If there is none then check in OMLR what indicators you have set in field immediate TO creation

Issue using material document number as dynamic bin for purchase orders

Hi...
We are currently using the material document number as a dynamic bin at receiving because we expect to have multiple receipts of the same purchase order. The current setup has everything going into quality inspection, and an inspection lot creates for each goods receipt.
When QM rejects parts to return to vendor, a 122 movement is automatically generated. When this 122 movement generates, the WM stock overview shows a negative balance using the material document number of the 122 movement as the dynamic bin. The positive balance still shows as the material document from the 101 movement.
Is there any configuration that can be set up to fix this issue or will SAP always take the most recent material document as the dynamic bin?
Thanks for the help!

I've tried the following configuration with movement type configuration:
Quality stock in 902 storage type with material document as dynamic bin (requirement type configuration updated). When a return to vendor is completed, there is a positive balance in 902 with the GR material doc number as the bin and a negative balance with the 122 material doc # as the bin.
I also tried configuring this with using GR-DOCK as a bin, and had the issue with the quant record being updated by the most recent inspection lot #.
I also tried using the PO as dynamic bin, and have the same error as above with the quant.
Error:
Error during creation of transfer orders for material document 0026001535
Date: 05/16/2008
Time: 10:52:23
Post.chge not. HR1 2000000011
No quants exist for posting changes
So as according to the OSS note I should use material doc # as dynamic bin to avoid this...but when I set this up I get the issue with positive and negative balances in my stock overview because SAP uses the most recent material document number for each posting.

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

Logic for finding transfer order creation date for a given delivery??

Hi,
I am trying to find a logic for connecting the table LTAK which has ERDAT as the T.O. creation date with LIKP/ LIPS table.
Can you please help me with this information.
Regards,
Peeyoosh.

Hi,
Go to LTAP to get the transfer order number based on delivery ltap-vbeln. Then got to ltak to get the Creation date.
Hope it helps
Vinod.

Change in logic for selecting the Bin while creating Transfer Order

Hi ,
Currently the system follows SAP process of BIN selection which is as mentioned-
With stock removal strategy Partial Pallet Quantity (A), system follows below steps to find the storage bin:
1.SAP always compares the requested amount from the Transfer Order with the largest bin amount available in the stock.
2.If the requested quantity of the transfer order is the same as or larger, the system removes the material from the largest bin amount first.
3.If the requested quantity is smaller, the system removes the material from a storage unit for partial quantities in ascending order.
Now the customer has requested a change which is -
It wants to take in BIN in the FIFO order followed by partial pallet .
Question is - Is this possible ?
Cheers
Disha

Hello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman

Missing entries for cancelled transfer order

Hi friends,
I created two transfer orders for a delivery document(stock is available in storage bins), but I cancelled two transfer orders.But I couldn't able to see entries in those cancelled transfer orders(cancelled transfer orders are blank at item level).I checked in LTAP table, there also entries are missing at item level.
Can someone please advice me?
regards,
Seetaram

Hi,
Check out this link Particularly last replay
[http://www.sapfans.com/forums/viewtopic.php?f=6&t=341743&start=0&st=0&sk=t&sd=a]
Thanks,
Anmol.

ERP Delivery/Transfer Order u2013 CRM Billing

Hi everybody,
Iu2019m new to this forum and I hope that this is the right place to post my request.
Iu2019m currently developing a course in CRM and face a problem. We use an IDES client of the UCC and I try to accomplish a sales order in the CRM System, process the delivery/transportation in the ERP backend and after the delivery is completed, there should be a billing due list item created in the CRM System. The problem is, that there is no Billing Due Item created/transferred to the CRM System. Here is how the process works:
Transaction Code: CRMD_BUS2000115 bzw. CRMD_ORDER
1.     Transaction Type is Sales --> Sales Process (Item Category ZSAL)
2.     Type in the following data
   a.       Sold-to Party     300025 (01Megastore)
   b.       Product          HT-1000
   c.       Quantity          1
3.     Save the document.
4.     Go to the ERP System and check whether the sales order was transferred (Transaction Code: VA02)
5.     Create a Delivery Document (Transaction Code: VL01N). Shipping Point is 3800 (Denver) and date is
        todayu2019s date + 1 week. Save the document.
6.     Create the Transfer Order use the following settings:
a.     Warehouse number          038
b.     Plant                            3800
c.     Delivery                       the number of the delivery
d.     Foreground/Backgrnd.     System Guided
e.     Adopt Pick Quantity             2 (Include pick, quantities in delivery and post Gl)
f.     Press Enter and save.
After I create the Transfer Order the delivery should be completed and since the Item Category of the Sales Transaction Type is ZSAL and ZSAL is set to be Delivery-Related, there should be a Billing Due Item created in the CRM System. So far the theory!
Now thatu2019s where the problems begin:
1.     There is no Billing Due Item created in the CRM System
2.     I try to create a billing due in the ERP System here I get the Error message, that the u201Cgoods issue has
        not been posted for deliveryu201D
3.     I take a look at the delivery (vl02n). Here the deliveryu2019s status is still at u201Cbeing processedu201D
4.     I try to u201Cpost good issueu201D manually.
5.     I get the error message u201CSyntax Error in substitution u2018Reg_SUBu2019, step u2018001u2019u201D
The error message long text is:
Syntax error in substitution "REG_SUB", step "001"
Message no. GB032
Diagnosis
A syntax error was found in substitution REG_SUB during the ABAP code generation.
System Response
An ABAP code is not generated for this Boolean statement and the statement is evaluated as FALSE (in ABAP include GBTWMFIC).
Procedure
Correct substitution REG_SUB using substitution maintenance.
Hopefully anybody here can help me with this problem. Thanks in advance
Taymaz

Hi Stephanie,
I just wanted to point out two things:
1. As Dinesh explained already, the first scenario is mostly used if the Logistics Execution (delivery, transportation) happens in ERP, and billing was already set up and used in ERP. But in principle you can also use CRM Billing in connection with Logisitics Execution in ERP. This means you create your sales order in CRM, your delivery and so on in ERP, and then you can bill the order or the delivery in CRM. The advantage of this is that you are able to bill e.g. sales order and service order items in one invoice.
2. In the second scenario you can upload orders to ERP (if you want to do Logistics Execution), but is is not necessary (if you don't do LE). And it is not necessary and not possible to upload billing documents to ERP. CRM transfers automatically or manually the billing document to ERP FI and creates and Accounting document. So it is fully integrated without replication and without using ERP Billing.
I hope this answers your questions.
If you are interested in an integration scenarion with CRM Order - ERP Logistics Execution and CRM Billing, please watch the following short video:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a07ef82a-60d2-2b10-98bb-9abcbc282bec]
Best regards,
Angela Thomas

Dynamic Bin for delivery Transfer Order

Similar Messages

Maybe you are looking for