Dynamic DNS not working

I have my router configured to automatically communiation with MI424WR (Rev. I) - Wireless Broadband Router when the IP address changes. For the last couple of weeks the router indicated it can't connect to the DNS service provider. I contacted them and they told me to contact Verizon. Called Verizon tech support and they had not clue. Any help would be appreciated. Using Google to see if other are having the same issues and there are dozen of people with the same issue. Then DNS service recommend using their PC applcation but that won't work as I travel a lot and my Laptop travels with me.

adamsfour wrote:
I have my router configured to automatically communiation with MI424WR (Rev. I) - Wireless Broadband Router when the IP address changes. For the last couple of weeks the router indicated it can't connect to the DNS service provider. I contacted them and they told me to contact Verizon. Called Verizon tech support and they had not clue. Any help would be appreciated. Using Google to see if other are having the same issues and there are dozen of people with the same issue. Then DNS service recommend using their PC applcation but that won't work as I travel a lot and my Laptop travels with me.
Are you using DynDNS? If so were you on a free account? If so your problem is that they just discontinued the free account availability and you now need to buy one of their paid services.

Similar Messages

DirectAccess on Server 2012 R2 with Single NIC behind NAT on IPv4 only Corporate Network Results in "DNS Not Working Properly"

I hit this problem at a customer site and can re-produce it in a simple lab. Lab environment: servers:
1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.1
1x Server 2012 R2 DirectAccess (DA) server - DA1 - 10.0.0.100
Servers are running "Update" (KB2919355) and following DA hotfixes:
KB2929930
KB2966087
I configured DA (via advanced wizard) as follows:
DA and remote access
AD group
directaccess-webprobehost DNA (A) record pointing to 10.0.0.100
behind an edge device (with a single network adapter)
SSL certificate from enterprise root CA issued to directaccess.contoso.com
NLS on remote server using https://nls.corp.contoso.com
DNS: corp.contoso.com = 10.0.0.1; nls.corp.contoso.com = ""
DNS suffix search list = corp.contoso.com
The DNS server validates successfully in the configuration UI.
With this configuration, I get a static IPv6 address of fd79:7a37:cbd9:3333::1/128 assigned to the NIC
The operations status is all green apart from DNS which displays the following error:
"DNS: Not Working Properly"
Error:
None of the enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
Causes:
Enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 are not responding.
I can, however ping fd79:7a37:cbd9:7777::a00:1 (which is the DNS64 translation of 10.0.0.1)
I would like to know what checks are failing as there are no failures in Event Viewer.
I have come across forums where people have the same issue and fix it by specifying the local IP (in this case 10.0.0.100) as the DNS server, however Richard Hicks has confirmed with me that the DNS server should be set to the DNS server, not the DA server's
IP.

Thanks for the post Matt,
ISATAP has been disabled on my DA server, so the results of a "ROUTE PRINT -6" command yields:
===========================================================================
Interface List
12...00 15 5d 01 03 64 ......Microsoft Hyper-V Network Adapter
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 IPHTTPSInterface
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
12 261 fd79:7a37:cbd9::/48 On-link
14 306 fd79:7a37:cbd9:1000::/64 On-link
14 306 fd79:7a37:cbd9:1000::/128   On-link
14 306 fd79:7a37:cbd9:1000::1/128     On-link
14 306 fd79:7a37:cbd9:1000::2/128    On-link
14 306 fd79:7a37:cbd9:1000:814c:28be:46b5:52c1/128   On-link
12 261 fd79:7a37:cbd9:3333::1/128 On-link
12 261 fd79:7a37:cbd9:7777::/96 On-link
12 261 fe80::/64 On-link
14 306 fe80::/64 On-link
12 261 fe80::20c0:e848:d304:9f01/128   On-link
14 306 fe80::814c:28be:46b5:52c1/128     On-link
1 306 ff00::/8 On-link
12 261 ff00::/8 On-link
14 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 fd79:7a37:cbd9:1000::/64 On-link
0 4294967295 fd79:7a37:cbd9::/48 On-link
0 4294967295 fd79:7a37:cbd9:7777::/96 On-link
===========================================================================

DNS not working properly

Hello,
Since a couple of days I got DNS problems. (DNS not working properly). This started happening after a Windows update. I tried to deinstall all of them and see if that helped but it did not.
I'm quite inexperienced with this.
Hope someone can help out.
Regards,

Hello,
is that in a domain or workgroup? Single machine only?
Please post an unedited ipconfig /all from the problem machine and also, if domain, from the DC/DNS server.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

RV042 Dynamic DNS not updating automatically

I purchased 2 RV042's (h/w version 3) less than two months ago. I updated them to the latest firmware (
v4.0.4.02-tm (Jul 4 2011 13:30:56)), did a factory reset to make sure I was working with a clean slate, set up DDNS through DynDNS and a site to site VPN between the two. Everything was working great for a month, then the DynDNS accounts expired because they weren't being updated.
I reactivated the names on the DynDNS site, and started to monitor the "last updated" date and time. After 24 hours there were no updates according to the DynDNS site. I logged into one of the RV042's, and it said "Dyndns Enabled : Dynamic DNS is updated successfully." This is a stale message from 24 hours ago when I hit save.
So I went into Setup | Dynamic DNS | Edit Config and there it also says "Dynamic DNS is updated successfully." I clicked "Save", status changed to "
Dyndns Enabled : Updating..." for a few seconds, and then back to "Dyndns Enabled : Dynamic DNS is updated successfully". I refreshed the DynDNS website and it shows the current time (in eastern time, i'm pacfic) as the last time it was updated. So it works when I manually hit the "Save" button. Not making any changed, just hitting "Save".
I've let the other RV042 go over 48 hours and it still hasn't updated.
So it apears for the time being, I'll have to remember to push the "Save" button once a week to prevent my DynDNS accout from expiring.
Does anyone have DDNS working in the lastest firmware and h/w version 3? If so, what is the update frequency?
I'd like to hear any suggestions on how I might be able to fix this, or if this needs to be fixed in the next firmware release. Hopefully, I've explained my problem clearly.

Jasbryan,
I am experiencing a problem with DynDns updater too. For me it seems that the updater (after a public IP change or reboot) only tries to update once, and if it failed then gives up and never tries again.
I have to update manually (pushing the update button) which sooner or later succeeds. (Sometimes the first trial is successful, sometimes only the second or third.)
I have an RV042 (v3) with firmware at 4.1.1 and a DynDns Pro subscription.
I have a site-to-site VPN between two RV042s, both with dynamic IP. When the VPN tunnel drops, I usually detect that one of the public IPs has changed and the router for some reason failed to update DynDns. If I do it manually pushing the update button (one or more times), the tunnel comes up of course.
Again, I suspect the problem is with the updater's "strategy" and timing. Should it wait a bit more after detecting a new public IP and retrying in every 5-10 minutes after a failed update attempt it would be more reliable.
Janos

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

Dynamic configuration not working in Java mapping

Hi All,
I have a scenario where i am using java mapping. In this i am doing following
1)Read file name from input message header
2)set file name in output message Header
3) set Directory name in output message Header
i have used following code .. but iit is not working... when i test end to end... in reciver communication channel it is failing stating " message failed as "Directory is not set in Header. Also i checked in SXMB_MONI "dynamic configuration".It is not showing Directory.
this is code.
public void transform(TransformationInput transformationInput,TransformationOutput transformationOutput)
               throws StreamTransformationException {
               private Map para;
               String Directory ;
               String inputFileName;
               String var1 = "ABC";
               para = transformationInput.getInputHeader().getAll();
               DynamicConfiguration conf = (DynamicConfiguration) para
                         .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
               DynamicConfigurationKey keyFilename = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "FileName");
               DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "Directory");
               Directory = "tmp/"+var1;
               conf.put(keyFilename,inputFileName);
               conf.put(keyDirecory, Directory);
I am in PI 7.1 ,   and in eclipse its showing warning that Para is not used.
Can anyone show some lights.
Also is there any way to debug this?? like is there any function by which i can write the trace for each step to see those in MONI.

Method name:   public void createDirectory(Resultlist result, Container container)throws StreamTransformationException
//Use Simple UDF and do the following lines
String Directory ;
String inputFileName;
String var1 = "ABC";
DynamicConfiguration conf = container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
inputFileName = conf.get(keyFileName1);
DynamicConfigurationKey keyFilename = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "Directory");
Directory = "tmp/"+var1;
conf.put(keyFilename,inputFileName);
conf.put(keyDirecory, Directory);
and remove these 3 lines
//private Map para;
//para = transformationInput.getInputHeader().getAll();
//DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION
>>I am in PI 7.1 , and in eclipse its showing warning that Para is not used.Can anyone show some lights.
You can simply remove declaring Map Para line... The eclipse gives warning because you dont assign values for it and you are trying to use...
For using the same input file name in output side, you dont need coding ... you need only for the directory...
Enable ASMA attributes in the channel.
Edited by: Baskar Gopal on Feb 24, 2011 10:58 AM

Dynamic Stamps Not Working in Adobe Acrobat Pro

Hi everyone, the dynamic stamps on Adobe Simultaneous Review are no longer working for us. I have Adobe Acrobat Pro 9 (it works for me) but it's not working for many other people (they have Adobe Acrobat Pro X). Does anyone know how we can fix this. I think the problem started occurring a few months ago.
Many Thanks!
Joy

You can shutting down Acrobat and then try moving (DO NOT DELETE - you may want put them back afterward if this doesn't work) the Collab and Sync folder out of the User's Acrobat folder and then rejoin the Shared Review to see if the Dynamic Stamps reappear.

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Form in Dynamic page not working when checkbox is used.

I have created a form using dynamic page. The form most have display fields and a checkbox field. When I check a box, it assigns 'Y' value and when unclick, it assign 'N' to the database field.
When I submit the form, the procedure which is supposed to save the form data never gets executed. Well, at least it says, page not found HTTP 404 error.
Interestingly if I make this field a text box and manually enter 'Y' or 'N', and then submit the form, the procedure is executed. Data gets saved.
Is the checkbox not supposed to be used for a database field because checkbox value can be assigned only using javascript and the procedure never get that value ?
Can you please tell me how to use a checkbox for a database field using dynamic page ?
thanks,
Mainak

Sharmila,
When I said, the form does not get submitted, I meant that the procedure does not work. The form gets submitted but the procedure does not work. It gives HTTP 404 error. That is what perplexes me. I am unable to understand why the procedure does not work when I click a checkbox.
May be you can make this work. I am hopeless about this.
Here is the code for the procedure sumbit_form:
NOTE: I ADDED TWO FIELDS CALLED PROMOT VARCHAR2(1), PROMOTID NUMBER(4) TO THE EMP TABLE AND CREATED A NEW TABLE CALLED PROMOTEMP. THIS IS A TEST CASE.
create or replace procedure sumbit_form
(p_empno IN portal30.wwv_utl_api_types.vc_arr, p_promot IN portal30.wwv_utl_api_types.vc_arr, p_action IN VARCHAR2)
is
begin
if p_action = 'save' then
for i in 1..p_empno.count LOOP
update scott.promotemp
set promot = p_promot(i)
where empno = p_empno(i);
END LOOP;
end if;
commit;
htp.p('<b>Saved Successfully</b>');
htp.p('<table border=1 bordercolor="red">');
for c1 in (select * from promotemp where promot='Y')
LOOP
htp.p('<tr><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.sal);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td></tr>');
end loop;
htp.p('</table>');
EXCEPTION
when others then
raise;
end;
Here is the code for the dynamic page.
<HTML>
<HEAD>
<TITLE>Promot Emp</TITLE>
<script language="JavaScript1.1">
function include(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements.type == 'checkbox') {
          if (thisform.elements[i].checked) {
               thisform.elements[i].value = 'Y'; }
          else { thisform.elements[i].value = 'N'; }
form.submit();
function show(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements[i].type == 'checkbox') {
          if (thisform.elements[i].value = 'Y') {
               thisform.elements[i].checked = true; }
          else { thisform.elements[i].checked = false; }
</script>
</HEAD>
<BODY>
<FORM action="scott.sumbit_form" method="post">
<table border=1 bordercolor="red">
<tr>
<td> </td>
<td>Name</td>
<td>Job</td>
<td>Manager</td>
<td>Hire Date</td>
<td>Commission</td>
<td>Department#</td>
<td>Include</td>
</tr>
<ORACLE>declare
i number;
begin
i := 0;
for c1 in (select * from scott.promotemp where promotid = :promotid)
loop
htp.p('<tr><td>');
htp.p('<input type="hidden" name="p_empno" value='||c1.empno||'>');
htp.p('</td><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.hiredate);
htp.p('</td><td>');
htp.p(c1.comm);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td><td>');
if (c1.promot = 'Y') then
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">Yes
<OPTION VALUE="N">No
</SELECT>');
else
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">No
<OPTION VALUE="Y">Yes
</SELECT>');
end if;
htp.p('</td></tr>');
end loop;
htp.p('</table>');
htp.p('<input type="submit" value="save" name="p_action">');
end;
</ORACLE>
</form>
</BODY>
</HTML>
thanks,
Mainak

Dynamic Configuration not working with Integrated Configuration

Hi All,
Dynamic Configuration works fine in PI 7.3 when Classical Configuration is used. However the same does not work using Integrated Configuration.
Scenario :
SOAP -->SOAP Synchronous scenario in PI 7.3 (Dual Stack).
Trying to save a value from Request mapping using dynamic configuration and use the same in response mapping.
UDF Code :
Request Mapping :
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey Variable = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "Variable1");
conf.put(Variable, a);
Response Mapping :
DynamicConfigurationKey Variable = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "Variable1" );
string1 = conf.get(Variant);
Note : Using Integrated Config(AAE Processing) - Response header does not have DynamicConfiguration header node , but Classical Configuration has that.
Regards,
Parimala
Edited by: ParimalaE on Mar 1, 2012 1:33 PM

For us this is what we had:
This didn't work (getInputParameters is the newer stuff that doesn't work):
DynamicConfiguration dc = (DynamicConfiguration)container.getInputParameters().getValue(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dck = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","TServerLocation");
dc.put(dck,"https://xyz.api-salesforce.com/services/Soap/c/26.0/0DFa00000008jis");
return "";
This works for us(we had to remove getInputParameters):
DynamicConfiguration dc = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dck = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","TServerLocation");
dc.put(dck,"https://xyz.api-salesforce.com/services/Soap/c/26.0/00D3000000001X0");
return "";

Dynamic query not working

hi
im using a dynamic query to put in an internal table but its not working
Can you see whats wrong in that?
gv_query = ' au~uname AS OTCTUSERNM,'.
CONCATENATE gv_query 'a1object' '.' 'a1field' ' AS 0TCTAUTH' INTO gv_query.
CONCATENATE gv_query 'au~to_dat AS OTCTADTO, OTCTOBJNM, ' INTO gv_query.
SELECT DISTINCT (gv_query)
INTO CORRESPONDING FIELDS OF TABLE gi_ds1
FROM agr_users AS au INNER JOIN
agr_1251 AS a1
ON auagr_name = a1agr_name.

Hello,
Following are the observations:
1. gv_query = ' au~uname AS OTCTUSERNM,'.
>> In above string i think you want to use uname column as OTCTUSERNM and it is correct
2. CONCATENATE gv_query 'a1object' '.' 'a1field' ' AS 0TCTAUTH' INTO
    gv_query.
>> In statement 2 above I am not able to understand whey 'a1object' '.' 'a1field' this is incorrect.
     Also '.' (dot) in not required in query it will be either '~' or 'AS' as valid chars.
3. CONCATENATE gv_query 'au~to_dat AS OTCTADTO, OTCTOBJNM, ' INTO gv_query.
>> In statement 3 above whey OTCTOBJNM is used there is no such column exit in AGR_USERS.
4. SELECT DISTINCT (gv_query)
    INTO CORRESPONDING FIELDS OF TABLE gi_ds1
    FROM agr_users AS au INNER JOIN
    agr_1251 AS a1
    ON auagr_name = a1agr_name.
>> In above statement a1 is used as alias for AGR_USERS then why it it not there in statement 3 where instead au is used.
Normarlly query is like this
'<alias1><col_name1> as <col_desc1>, <alias2><col_name2> as <col_desc2>......up to n cols
In this case it is possible that alias1 and alias2 are used for different table in case of joins and for same table in case of self joins.
Finally, You can only define colums in dynamic query those are available in the table from which we have to select the data.
Hope this helps.
Thanks,
Augustin.

Exchange 2013 CAS - Round Robin DNS not working properly

I have exchange 2013 server (2MB, 2CAS) server. I created two dns records for mail.test.com, autodiscover.test.com pointing to my two CAS servers.
But the problem is if i switched of one cas server, client outlook not connecting automatically to other CAS server. By restarting the outlook also its not working. By restarting the system or running the command ipconfig /flushdns in command prompt, it
working.
is there any configuration iam missing, please advice how to achieve decent load balancing in Exchange 2013 CAS without going for third party Loadbalancer...

I have exchange 2013 server (2MB, 2CAS) server. I created two dns records for mail.test.com, autodiscover.test.com pointing to my two CAS servers.
But the problem is if i switched of one cas server, client outlook not connecting automatically to other CAS server. By restarting the outlook also its not working. By restarting the system or running the command ipconfig /flushdns in command prompt, it
working.
is there any configuration iam missing, please advice how to achieve decent load balancing in Exchange 2013 CAS without going for third party Loadbalancer...
If a CAS role server is down or unable to service clients, you have to remove it from DNS round-robin consideration manually. There is no health check with DNS round-robin unlike a true load balancer.
Also, I would set the TTL to a low value for the CAS servers in the round-robin.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Dynamic Link Not Working

To anyone that can help..
I am having several issues with adobe at the moment and really need some advice. i have tried adobe themselves, they struggled to help too, but that was mainly down to language issues.
I have a Canon XHA1S camera with an external shotgun mic Rodeo NGP-2. All of which at some point worked through premiere pro CS5 and encore. i was living the dream.
Then one day, it all started having issues.
Problem #1 - Dynamic Link stopped working
Once my project is done, i would send it to Encore via dynamic link and produce my DVD in either regular or blu ray. Now it doesn't. A box 'import premiere pro sequence' comes up but encore crashes before it can complete the import. sometimes a message telling me "the software thats used to decode the media is not available on this system. installing the correct decodes for the file your working with may help correct the problem" comes up too
Its strange that i've produced about 20 disks with no issues but now a problem. was told by adobe it could relate to the file/pixel size? but again have no idea why this is now a problem now and not before, in fact i would just be happy to know how to change it so it can work? Can anyone help?
Problem #2 - Audio
The only way i am able to make a disk at the moment is to produce it on DVD maker - it's the only way until i get my issues resolved. however my external mic is not coming through, this has something to do with the sound quality to the mic being 44.1 and the DVD maker requiring 48mhz. i can't seem to convert this to work in anything but AVI (would like MPEG-2) but then the picture quality drops to something similar to a tribul rubbing.
If anyone knows of something or can point me in the right direction i would be very greateful
Thanks

Especially for Bluray or DVD that is HD to SD, DL must sometimes be avoided.
But the type of problem you are having may indicate other problems. If regular projects are not working, see these:
Troubleshoot damaged projects in Encore on Windows
http://kb2.adobe.com/cps/406/kb406006.html
Troubleshoot system errors and freezes | Adobe software on Windows
http://kb2.adobe.com/cps/822/cpsid_82252.html
Regarding the audio, can't you just export as 48K?

WiFi problem - No internet / DNS Not working

Hi,
I installed 64bit Windows 7 on my T500, and I'm having problems when connecting to wireless networks.
Everything works fine with wired networks, but when I connect to a wireless network (any wireless network) DNS isnt working.
I can ping and connect to websites using IP, but it refuses to resolve domain names. I have verified that the correct DNS servers are beeing used.
I have installed all the drivers supplied by Lenovos system update + some beta drivers from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html, but at this time I'm no longer sure what drivers are beta and whats release.
Software & drivers installed:
Access Connections version 5.42 build 6JC725WW
Realtek 11b/g/m Wireless LAN Mini-PCI Express Adapter II (driver version 2007.2.1103.2009)
Microsoft Virtual WiFi Miniport Adapter (driver version 6.1.7600.16385
Anyone know what this could be?
Thanks,
Trygve
Solved!
Go to Solution.

I have had this happen now on three seperate Lenovo laptops. They are the 4446-25U model. This is the THIRD time that this exact same problem has manifested in this model of laptop. I am in a corporate environment and all systems are joined to the domain.
All are running the XP Pro downgrade. All will ping both internal and external IP addresses, but will not resolve the domain name (neither internal or external). All were working fine, then suddenly began with this issue that I have so far been unable to resolve. I cannot see that any software has been installed to create a Layered Service Provider issue which seems to be the only thing that matches symptoms with what I am seeing according to MS. Previously when the the first laptop did this about 3 mos ago, I restored it using the Vista restore discs, and had to forego the XP Pro downgrade. I didn't have time to tinker with it, so I just restored it with Vista and went on. I have now seen two more inside of a week with exactly the same issue. DNS does not work. DNS services have been stopped and re-started, DNS has been both statically assigned, as well as handled by DHCP, new user account created, all unneccesary software removed, and several other seemingly un-related things changed around to see if anything would work, and I cannot get DNS to resolve names.
If anyone has seen this issue please post here. I think it's odd that this has happened now three times on three seperate laptops of the same model. I've seen screwy DNS problems before, but I think I can remember one or maybe two times in my career that DNS just refused to work for no rhyme or reason, and now I've seen two in a week!!

Dynamic DNS not working

Similar Messages

Maybe you are looking for