Dynamic Filter Display in Report Designer

Hi All,
We have implemented a new BI reporting tool and are using Report Designer for the output format. The problem is that we cannot see any dynamic filters or navigational level when printing as RD takes it back to the original format. To overcome this issue, we have given the same query with the variable selection so that RD always prints the variable selection but this has reduced performance.
Anyone with ideas to overcome this situation or any workarounds will be appreciated.

thanks Ajeet ,
But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
Thnks . please advice.
Regards

Similar Messages

  • Selection input should display in report designer

    Hello Friends,
    Need some help .
    I am currently working on BI7 and there is one requierment for Report Designer.
    Actaully user is looking for the selection creteria after execution of the report like
    I have executed the report designer application with the company code 5060 ,
    then I should be able to the see the selection creteria , where as I am able to see the data.
    In this case ,I am able to see the data but could not guess that what was the my selection creterai like we get in Bex Query or in Bex Anaylyzer.
    So please let me know how can we check the selection input which we have given or how can we display selection input in Report designer ?
    Is there any specific settion , please advice .
    Thanks in advance.
    Regards

    thanks Ajeet ,
    But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
    Thnks . please advice.
    Regards

  • How to hide currency ($) display in Report Designer

    Hi Reporting experts,
    My query has amounts in keyfigure structure. When I use WAD or run directly from the query the display of $ sign is showing only on the top row, but when I use the same query in the report designer the $ is showing on every cell. How to avoid displaying the $ in RD.
    Thanks for your help.

    Ram,
        Create a formula and use the function NODIM(<your KF>) and hide you KF column which shows the $ sign. This would suppress the $ sign.
    Hope this helps...

  • Hierarchy Node display in report designer

    Hi,
    Urgent please help me out.
    I have an issue with report designer. I created a static report in Query designer with 2 structures. When i try to include this query in Report designer, only the last level nodes are getting into the Report designer. All the above level nodes are not featuring in Report designer.
    Please help me how to make these top nodes visible in Report Designer.
    Points are assured for each reply

    thanks Ajeet ,
    But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
    Thnks . please advice.
    Regards

  • Dynamic Filter on Interactive Reports

    Great job guys on the new Interactive Reports feature of 3.1
    I can't express how much time this will save us in our development effort and how much real estate on the screen is saved by not having to create our own report filters.
    My question is this:
    Say you have defined a default filter that returns all rows that were created between 01-JAN-1999 and 31-DEC-2999 (all rows in our application)
    Is it possible the make the 2 dates dynamic in the filter i.e. I would like to default these to the start and end date of the current month?
    Thanks for any help or suggestions
    Duncs

    I think I may have found the answer using the "In the Last" operator
    Will post my solution once implemented
    Duncs

  • Dynamically hide/display multiple report regions.

    Hi,
    I need to build a dashboard like homepage for users with multiple report regions. Users should be able to pick the regions they want and the display point for those regions.
    Is this possible?
    Thanks in advance

    Hello Asha,
    I think the "where" part would have to come from CSS. If you visit http://apex.oracle.com/pls/otn/f?p=49882:3653 you can see a couple of HTML type regions which I placed using div tags and putting something like<div class="rpt_query" id="rpt_query">in the region Header and </div> in the region footer. You can accomplish the same with Report type regions and maybe any type of region.
    As for whether or not a region is shown, that can be done in the Conditional Display attributes. I do this by selecting "Value of Item in Expression 1 = Expression 2" as the Condition Type, a hidden page item as Expression 1, and a number (perhaps corresponding to check box as mentioned previously) as Expression 2. I'm actually using pseudo tabs and when a user clicks one of the tabs it changes the value of the hidden page item and submits the page to get the new region to show up.
    Hope this helps,
    Gregory

  • Error in Dynamic Data display using Visual Design in ADF Richclient Demo

    Hi,
    I am using JDeveloper Studio Edition Version 11.1.1.1.0 with build Build JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407
    I have found a reference to this ADF faces richclient demo on the following link:
    http://jdevadf.oracle.com/adf-richclient-demo/faces/visualDesigns/index.jspx?_afrLoop=2181068810216756#%2FvisualDesigns%2Fdashboard.jspx%40
    I downloaded the WAR file and deployed in the server and running smoothly. But when I added, for example, EmployeesView1, by drag and drop from datacontrol,
    on one of the panels (.jsff page) and ran the application. Now its throwing an exception like:
    javax.el.PropertyNotFoundException: Target Unreachable, identifier 'bindings' resolved to null
    Can any guru shed the light on this and help me out?
    Looking forward to any replies.
    Thanks in advance.
    Yadava Rao

    Hi,
    My faces project is having the following libraries under WEB-INF/lib folder:
    adflogginghandler-JDEVADF_MAIN_GENERIC_070917.1906.4699.jar
    adf-richclient-api-11-r1-SNAPSHOT.jar
    adf-richclient-impl-11-r1-SNAPSHOT.jar
    adfsharebase-JDEVADF_MAIN_GENERIC_070917.1906.4699.jar
    adfshare-JDEVADF_MAIN_GENERIC_070917.1906.4699.jar
    commons-beanutils-1.6.jar
    commons-lang-2.1.jar
    dms-11.1.1.jar
    indexer-080909.1801.375.jar
    jsf-facelets-1.1.11.jar
    trinidad-api-1.2.11.1-SNAPSHOT.jar
    trinidad-api-1.2.11.1-SNAPSHOT-sources.jar
    trinidad-impl-1.2.11.1-SNAPSHOT.jar
    xercesImpl-2.6.2.jar
    xmlparserv2-11.1.1.JM7_4119.jar
    Apart from this, my model project contains the following libraries (shows in Project Properties):
    ADF Model Runtime
    BC4J Oracle Domains
    BC4J Runtime
    BC4J Security
    BC4J Tester
    MDS Runtime
    MDS Runtime Dependencies
    Oracle JDBC
    So, please suggest me if something is missing apart from these.
    Appreciate your help or a soultion to get the data from databse in jsff page of dashboard visual design in adf-richclient-demo.
    Thanks

  • How to create  some columns dynamically in the report designer depending upon the input selection

    Post Author: ekta
    CA Forum: Crystal Reports
    how  to create  some columns dynamically in the report designer depending upon the input selection 
    how  export  this dynamic  report in (pdf , xls,doc and rtf format)
    report format is as below:
    Element Codes
    1
    16
    14
    11
    19
    10
    2
    3
    Employee nos.
    Employee Name
    Normal
    RDO
    WC
    Breveavement
    LWOP
    Sick
    Carers leave
    AL
    O/T 1.5
    O/T 2.0
    Total Hours
    000004
    PHAN , Hanh Huynh
    68.40
    7.60
    76.00
    000010
    I , Jungue
    68.40
    7.60
    2.00
    5.00
    76.00
    000022
    GARFINKEL , Hersch
    66.30
    7.60
    2.10
    76.00
    In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
    if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
    Can anybody help me how do I design such report....
    Thanks

    Hi Developer life,
    According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
    As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric  values) in the details,  add  an filter to filter the data base on this column group, but if
    the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
    If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
    Similar threads with details steps for your reference:
    https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings 
    If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
    Any question, please feel free to let me know.
    Best Regards
    Vicky Liu

  • Report Designer - Summary page based on 3 queries with dynamic hierarchy?

    Dear All,
    I am trying to build a workbook based on 3 queries with a summary page that pulls in the query data into one page.
    Each query is based on one key figure that is split by profit centre hierarchy.
    i.e.
    Turnover
    -Profit Centre Node A
    -Profit Centre Node B
    -Profit Centre Node C
    > Profit Centre C1
    > Profit Centre C2
    The user can dril-down into each query at whatever level of the PC Hierarchy they wish.
    My issue is trying to structure a dynamic summary page that pulls in all rows from the individual queries regardless of the number of profit centre hierarchies contained in each. i.e. The summary could have 5 PCs for queries 1,2 & 3 in one execution, but then 10 for all queries in another execution.
    Question:
    Can report designer be used to make a dynamic summary sheet that will capture all rows from the individual query? or would an excel macro summary be the only way of doing this?

    Hi Ingo,
    After much testing and looking into trace etc. we have got this thing to behave as desired. Basically, following two things,
    - no reference to CR Dynamic Hierarchy variable on report. There were places where this parameter was being refered and causing grief. We tested with brand new report.
    - making sure that on query Cost center restriction is placed in Characteristic Restriction area of Filter tab of query, as oppose to default value area filter tab.
    With above in place, the published report in infoview behave as desired, i.e. proper hierarchy structure in cost center prompt and group tree and only desired nodes showing on report.
    Thank you for all you pointers
    Regards
    IMS

  • Few values of report column do not display in report while applying filter

    Post Author: anuragg11
    CA Forum: WebIntelligence Reporting
    There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

    Hello,
    I think i know what your problem is.
    Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
    One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
    1. click on a column to add it in the criteria (it doesnt matter which one)
    2. go into the edit formula of that column
    3. delete the formula and in its place write 'Dummy Column 1'
    Do the same for the second request by adding a "Dummy Column 2'
    Now the Pivot Table should also show up correctly
    Let me know if it goes well or if you have any further questions,
    Kostis

  • How can I re-display the header of table on next pages (report designer)

    In the report designer, I insert a data provider. The fist line is the field name.
    When I browse the report, the field name line can't display on the second page, only on the first page.
    How can I do to display it on next pages?
    Thanks
    Eva

    Look at the code of the MouseListener to see what method it invokes and then just invoke the method directly.
    Or you can create a MouseEvent and use the Component,dispatchEvent(...) method.

  • Dynamic Filter in report omitted when characteristic not in output.

    Hi all,
    Hopefully someone can help me with the following:
    Since upgrading from 7.01 to 7.4, we encounter strange behaviour in a (WAD-) report.
    When filtering a free (compounded-) characteristic by excluding certain members via the navigation panel, the filter only works when the characteristic in question is displayed in the output. When you drag it out of the presented layout, the excluded member is included again, as we see the keyfigures go up to the level when it had when it was included. The filter display however still shows the characteristic member as being excluded.
    In 7.0, this phenomenon can not be reproduced.
    I've searched the net and SAP notes, so far with no success.
    Any ideas?
    Thanks in advance,
    Eduard

    Yes, let me explain the reason because sales have to be database delegated.
    In my case sales is not the sum of quantity of productos bought by a customer, sales is like a indicator that show me if customer bought or doesnt bought.
    For example David is my customer and i sell 3 types of products: A, B and C.
    Date 12.04.2011 David bought product A and B and 13.04.2011 David bought just product C.
    In my report if i want to analyze sales by day and customer i have to have the following result:
    *****Date 12.04.2011 and customer  Dave
                Sales = 1
    *****Date 13.04.2011 and customer  Dave
                Sales = 1
    In my report if i want to analyze sales by day and type of produc i have to have the following result:
    *****Date 12.04.2011 and customer  Dave
                Sales  Product A= 1
                Sales  Product B= 1
    *****Date 13.04.2011 and customer  Dave
                Sales  Product C= 1
    Can you see my point??
    In date 12.04.2011 i cant do a sum if i am analyzing sales by customer because if i do a sum dave show me a sales of 2.
    The only way that i found for this behavior is to use database delegated.
    I will wait for your answer.

  • How to display top 2 countries in 2 columns in Report Designer

    Hello Gurus ,
    I have a requirement where top 2 countries has to be displayed in two different columns in Report Designer.
    is there are way to do that, i tried many differetn ways but was not successfull, apart from creating text variables and writing customer exit.
    I appreciate your help
    Thanks,
    Kumar

    Hi,
    I am not sure what version you are, from version 9.3 I think there is a "Top" function, just highlight the row, tick the option for "Top", set the number and the column
    Failing that if you need to use rank could you not hide the column.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Graphic/Image not displayed with conditional formatting in Report Designer

    We are facing problems with displaying an image in a conditional formatting in the Report Designer. The image itself is in the mime repository and can be displayed in the report if no conditional formatting is used. But if it is used the image doesn't appear in the report.
    Backend setup: SP 8
    Frontend setup: Patch 8, hotfix 2, Revision 95
    Any help is highly appreciated.
    Sven

    Hi,
    I could not reproduce your problem in internal SP8 system. Also images in rows with conditional formatting are displayed.
    Do you get any errors after the execution in the portal?
    Try to use exactly the same image in both rows (drag-and-drop with CTRL key pressed).
    If then your problem still occurs, open a customer message. Describe your problem in detail and write technical name of the report you used.
    Regards, Karol

  • Apply OR clause in dynamic filter on an interactive report

    Apex ver - 4.2
    I have a requirement wherein I have to apply filter on interactive report. I have to apply filter which will change depending upon different conditions. So I created a PLSQL process on "On Load Before Region"
    For e.g if condition is --- status = 'Open' and Approved = 'Yes'
    I can write a PLSQL process with code as:
    apex_util.ir_filter(p_page_id => 1, p_report_column=>'Status' p_operator_abbr=>'EQ', p_filter_value=>'Open');
    apex_util.ir_filter(p_page_id => 1, p_report_column=>'Approved' p_operator_abbr=>'EQ', p_filter_value=>'Yes');
    But these filters have AND logical operator
    What can I code if I want OR condition i.e.
    status = 'Open' OR Approved = 'Yes'

    Check out these blog postings from the APEX Dev Team:
    http://anthonyrayner.blogspot.com/2008/07/dynamic-date-filtering-in-interactive.html
    http://dpeake.blogspot.com/2008/03/advanced-interactive-reports.html

Maybe you are looking for

  • CS5.5 will open a session or wav but won't play or record.

    This is a strange problem because it was working before just fine. But now, when I open up my multitrack or just a simple wav, I can't get it to play or record or anything, all the buttons are faded. Sound works on my windows 7 system. Preferences ->

  • Wi-Fi icon grayed out "No Wi-Fi"

    I just got my 16gb Iphone 4. I set up my Wi-Fi and used it for a while. Then I noticed the next day that my connection had switched to 3G and when I went back into settings the Wi-Fi icon was grayed out (cannot click on it) with the message "No Wi-Fi

  • ITunes was not able to locate any of 10108 missing files.

    Hi All, just about ready to destroy my laptop trying to fix this issue. itunes cannot find any of my files. i have unchecked "keep itunes media folder organised" i have unchecked "copy files to itunes media file when adding to library" and i have tri

  • Two iPhones, two iTunes accounts, one computer, different music tastes!

    I haven't seen an answer to this question yet, though I have seen a theory. I haven't tried it just yet, but I decided I'd ask if there's an easier way. Myself and my girlfriend have an iPhone 4, and we both have our own iTunes accounts, with our own

  • HP6700 ADF error message saying original is jammed in the ADF

    Office Jet 6700.  Message appears saying the original is jammed in the ADF open ADF cover and reload the original.  When I open the ADF cover there is no obstruction anywhere.   I am unable to copy or scan to my Imac.