Dynamically choosing operation in db adapter

Hi,
I have a xml message on which various operations can be performed like create,update,delete,read.I want depending upon user input i am able to do the selected operation and want to create just one DB adapter to do so instead of 4 i.e. one for each operation .Is there any way to do so.I don't want to use a PL/SQL procedure and want to handle in bpel only and using db adapter.
Regards,
Nitin

i have some logic that is first handle in bpel and than i call the db adapter . when we create partnerlink we have to select only one operation in that.Can we change that dynmically.We can change the partnerlinks dynamically.Same way can we do for the operations in db adapter
Thanks & Regards,
Nitin

Similar Messages

How can i set dynamic properties in HTTP Binding adapter at run time

Hi,
I am trying to put dynamic properties in HTTP Binding adapter at run time. I am able to Set endpointURI, UserName and Password dynamically using below code.
Is it possible to set Version , Retry Count, timeout, authentication type at run time.
below is code for setting endpointURI, UserName and Password dynamically.
<invoke name="HttpInvoke" bpelx:invokeAsDetail="no"
partnerLink="SACS_Http_Adapter"
portType="ns1:Request_Response_ptt" operation="Request-Response"
inputVariable="HttpInvoke_Request-Response_InputVariable"
outputVariable="HttpInvoke_Request-Response_OutputVariable">
<bpelx:toProperties>
<bpelx:toProperty name="endpointURI" variable="inputVariable"
part="payload" query="@endpoint"/>
<bpelx:toProperty name="javax.xml.ws.security.auth.username"
variable="inputVariable" part="payload"
query="@username"/>
<bpelx:toProperty name="javax.xml.ws.security.auth.password"
variable="inputVariable" part="payload"
query="@password"/>
</bpelx:toProperties>
</invoke>
Thanks,
Siva
Edited by: 929920 on Apr 25, 2012 7:45 AM

Hi Bastain,
Assuming your using the Batch Process Model, you can programatically insert a new SN into the correct parameter in the postUUT callback sequence.
This sequence has access to the UUT.SerialNumber parameter so you can use a File Global to pass the SN from the main sequence to the postUUT callback.
Here is an example of what I mean.
Adam
Attachments:
set SN within Main Sequence.seq ‏80 KB

How do I use Derived Table to dynamically choose fact table

How do I use the Derived Table functionality to dynamically choose a fact table?
I am using BO XI R2 querying against Genesys Datamart kept in Oracle 10g. The datamart contains aggregated fact tables at different levels (no_agg, hour, day, week, etc...) I would like to build my universe so that if the end user chooses a parameter to view reports at daily granularity, then the daily fact table is used; choose hourly granularity, then hourly fact table is used, etc....
I tried using dynamic SQL in Oracle Syntax, but Business Obljects Universe didn't like that type of coding.
The tables look something like this:
O_LOB1_NO_AGG o
inner join V_LOB1_NO_AGG v on o.object_id = v.object_id
inner join T_LOB1_NO_AGG t on v.timekey = t.timekey
Likewise, in the 'hour', 'day', 'week', etc... fact tables, the Primary Key to Foreign Key names and relationships are the same. And the columns in each O_, V_, T_ fact table is the same, or very similar (just aggregated at different levels of time).
I was thinking of going a different route and using aggregate aware; but there are many Lines of Business (20+) and multiple time dimensions (7) and I believe aggregate aware would require me to place all relevant tables in the Universe as separate objects, which would create a large Universe with multiple table objects, and not be maintenance-friendly. I also was going to dynamically choose Line of Business (LOB) in the derived tables, based on the end user choosing a parameter for LOB, but that is out-of-scope for my current question. But that information sort of points you down the train of thought I am travelling. Thanks for any help you can provide!

You can create a derived table containing a union like the following:
select a,b,c from DailyFacts where (@prompt('View'....) = 'Daily' and (<rest of your where conditions here if necessary>)
union
(select a,b,c from MonthlyFacts where (@prompt('View'....) = 'Monthly' and (<rest of your where conditions here if necessary>))
union
(select a,b,c from YearlyFacts where (@prompt('View'....) = 'Yearly' and (<rest of your where conditions here if necessary>))
I assume that you are familiar with the @prompt syntax
Regards,
Stratos

Dynamic File name in File Adapter

Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
Saiju

Hi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM

Dynamic email address in MAIL adapter

Hi ALL,
Is there a way of sending dynamic email addresses in mail adapter?
Regards,
XIer

Xier,
Yes. You can do it. Using Mail adapter option with Use MailPackage option.
raj.

Dynamic UserID/Password for file Adapter

Hi,
How to use dynamic UserId/Password for file adapter ?
(Sender/Receiver)
In our case the Id/Pwd of FTP Site changes freguently.
Can anyone help.
Thanks in Advance
Regards
Chemmanz

Hi Chemmanz,
>>>>In our case the Id/Pwd of FTP Site changes freguently.
but do you have those passwords in the message payload?
if not then you will still have to fill it somewhere right?
BTW
the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
but this is not possible in standard I believe
Regards,
michal

Build dynamic SQL query in Database Adapter.

Hi All,
I have a requirement to build dynamic sql query at Database Adapter.
My BPEL process is getting search spec as input from siebel. I need to process this searchspec in BPEL and need to build the SQL query dynamically at Database Adapter to fetch the records from DB.
it goes like this....
1. Sieble Search Spec: city1 OR city2 OR city3 OR city4 .....
I need to build query as
select * from S_ADDR_PER where city like 'city1' OR city like 'city2' OR city like 'city3' OR city like 'city4' ......
2. Siebel Search spec: city1 AND country1 AND state1....
I need to build query as
Select * from S_ADDR_PER where city like 'city1' AND country like 'country1' AND state like 'state1' ....
3. Siebel Search spec: state
I need to build query as
select * from S_ADDR_PER where state like '%state%';
Is it feasible in Database Adapter? if its Yes.
Any guidelines to achieve this?
Thank you
Chandra

Hi All,
I have a requirement to build dynamic sql query at Database Adapter.
My BPEL process is getting search spec as input from siebel. I need to process this searchspec in BPEL and need to build the SQL query dynamically at Database Adapter to fetch the records from DB.
it goes like this....
1. Sieble Search Spec: city1 OR city2 OR city3 OR city4 .....
I need to build query as
select * from S_ADDR_PER where city like 'city1' OR city like 'city2' OR city like 'city3' OR city like 'city4' ......
2. Siebel Search spec: city1 AND country1 AND state1....
I need to build query as
Select * from S_ADDR_PER where city like 'city1' AND country like 'country1' AND state like 'state1' ....
3. Siebel Search spec: state
I need to build query as
select * from S_ADDR_PER where state like '%state%';
Is it feasible in Database Adapter? if its Yes.
Any guidelines to achieve this?
Thank you
Chandra

Help on Dynamic queue name in JMS Adapter

Hi Experts,
Could you please explain how to configure dynamic queue name in JMS Adapter.
My requirement is i would have to add the date and time to JMS Queue Name in receiver JMS Adapter.
Thanks in Advance
Chilla

hi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

How to choose data in file adapter?

How to choose data in file adapter?

create a xml file in source folder in local source location and pick it up using file adapter in BPEL and deliver it to Target location.

DYnamic select statement in JDBC adapter?

Hi guys,
Is it possible so send dynamic select statement in jdbc adapter?
XIer

Aamir,
The poster did not specify whether this was sender or receiver channel, but it would only make sense that a "dynamic query" must be on the receiver communication channel since if it was on the sender channel, the channel would have to intelligently determine how to do dynamic queries.
Also, the poster asked if there was a way to "send a dynamic query" to the channel. This seems to imply that the channel is receiving information from somewhere to determine the query, which could only mean it is a receiver channel.
If you would like more information on the JDBC sender communication channel, please open a new thread.

Move operations of FTP adapter

Hi,
I have used a FTP adapter with move operation to move file from one directory to another directory of different server. As per the Oracle document , I have specified the source directory , destination directory, source file name and destination file name in the BPEL source code. And it is working fine. But I have a requirement to be having the options to change these source directory , destination directory, source file name and destination file name from the EM console. But in this case it is not working. It is quite obvious , it will not be available from EM as it is driven by the BPEL code. So can anyone please suggest me whether we can use these move operation of FTP adapter driven by the adapter JNDI?

Hi,
You can add preferences to your composite, they can be changed on EM and your BPEL will retrieve the values.
Have a look into this entry on Eric's blog...
http://eelzinga.wordpress.com/2009/10/28/oracle-soa-suite-11g-setting-and-getting-preferences/
Hope this helps...
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question
https://forums.oracle.com/forums/ann.jspa?annID=330

RE: (forte-users) (Fwd) ODBC & Dynamically Choosing aDatabase Ve ndor

The error you are getting is saying that the data source is not correctly
specified. Make sure the data source(or the name of the ODBC driver you
created) is correctly specified in your code.
ka
-----Original Message-----
From: Duncan Kinnear [mailto:[email protected]]
Sent: Sunday, December 19, 1999 6:26 PM
To: [email protected]
Subject: (forte-users) (Fwd) ODBC & Dynamically Choosing a Database
Vendor
I am trying to dynamically create a DBSession to connect to the
Microsft SQL Server ODBC Driver on a Forte Server Node.
I have tested the ODBC connection on the Local Machine and it works fine.
I have connected to the SQL Server on that machine with a Static
DBSession Object and that works fine.
I have used the same code to create a DBSession to Informix on Unix
and that worked fine.
The error I get is a converted ODBC one:
SYSTEM ERROR: Attempt to load partition named TestWinProject_cl0_Part1
failed.
Class: qqsp_ResourceException
Error #: [1001, 4]
Detected at: qqrt_ForteExecAgent::LoadPartition at 2
Error Time: Mon Dec 20 12:05:37
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!7
(object name Unnamed) from partition "Node Manager", (partitionId =
40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11c, taskId =
[40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11c.38]) in application
"System
Manager", pid 250 on node ALLY in environment testenv
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= 40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11e, taskId =
[40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11e.22]) in application
"TestWinProject_cl0", pid 235 on node ALLY in environment TestEnv.
SYSTEM ERROR: Failed to create service object TestDataProject.TestService.
Class: qqsp_ResourceException
Last TOOL statement: method TestServiceMgr.
Error Time: Mon Dec 20 12:05:37
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= 40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11e, taskId =
[40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11e.22]) in application
"TestWinProject_cl0", pid 235 on node ALLY in environment TestEnv.
USER ERROR: (This error was converted)
Failed to connect to database: ForteSQLServer , username: justin .
[Microsoft][ODBC Driver Manager] Data source name not found and no
default
driver specified
Class: qqdb_RemoteAccessException with ReasonCode:
DB_ER_DBMSCONNECTION
DBMS SQLSTATE: IM002
Class: qqsp_ErrorDescriptor
Detected at: qqdb_OdbcVendorInfo::DoSQLConnect at 10
Last TOOL statement: method ServiceMgr.SetDBSession
Error Time: Mon Dec 20 12:05:37
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= 40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11e, taskId =
[40114BC0-B0FC-11D3-B4D6-E87D6941AA77:0x11e.22]) in application
"TestWinProject_cl0", pid 235 on node ALLY in environment TestEnv.
Versions:
SQL SERVER 6.5
ODBC Driver SQL Server 2.65.0240
ODBC Manager 3.0.28.22
NT 4 sp4
Forte 3.0.J.1
The code I'm using is almost identical to that given in the "Dynamically
Choosing a Database Vendor" section of the "Making a Database
Connection" chapter of the "Accessing Databases" manual.
Any suggestions would be greatly appreciated
Thanks in advance.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email:
[email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10
years
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Biztalk 2010 : Dynamic send Port Block : HTTP Adapter

Hi
I have a customer who makes an intensive use of the DefaultServerApp host instance.
All of his applications use this instance for dynamic send port ( HTTP send adapter)
The problem is sometimes the messages accumulate in the message queue of the HTTP Send adapter and I have to restart the host instance to fix the problem until it appears again a month later.
note: many messages are timed out , could this to be the root cause ?

Secondary messagebox
-why !!!!
You have an issue in just one of the host instances. Where is this Secondary messagebox came into play? Is your database struggle with the load and does the message process
affect “all your processing in BizTalk”?
Or is this issue in host instance/design related. As you have many dynamic ports all of them will be using the default host instance. Some of these processes may have high
volume or high size messages so your host instance may be struggling to process the message and could cause the memory/process usage related issue. Exactly for these reasons Microsoft has given an option to tweaking the host processing and throttling setting.
Adding an additional messagebox database would be overdo for your issue.
Consider tweaking the throttling settings. If the process memory was increasing
continuously and if your investigation boils down to process memory usage for this issue, consider tweaking the
Process memory usage and Physical memory usage throttling thresholds.
Consider the suggestions from this MSDN article..
http://support.microsoft.com/kb/918643
Also consider about adding more RAM, physical memory.
As I mentioned in my earlier post, run the messagebox viewer tool and review its reports for health of the server.
Also ensure you have the latest version of Cumulative Update for your version of BizTalk installed. In some of the CUs, fix for memory leak has been included.
Another suggestion, review the design where you have so many dynamic ports. May be some of these processes have high volume or high size messages and since all use the dynamic
ports hence the same host instance you could have this issue. Consider to move away from dynamic port for some of the processes, if you find either high volume or high size message processing.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

When i choose operation mapping the system prompt no suitable date fund

when i choose operation mapping the system prompt no suitable date fund, i can't find the reason. I hope to get your help

HI Nathan,
Your Receiver Interface name is SI_Billhead_In.SI_BillHeadIn and the one you have used in ID is different from the one in Interface Determination.
Try changing the above and it might work.
Thanks & Regards,
Tejas Bisen

Dynamically choosing operation in db adapter

Similar Messages

Maybe you are looking for