Easylink does not detect internet connection

Please help. I have a wireless G broadband router model wrt54g. I've had it for about a year in a half and used it maybe twice. I just ran the setup and got an error saying easylink does not detect your internet connection. I went on line to make sure I was connected and followed the steps to resolve this issue. I got a message saying congratulations your router was configured succesfully but you are not yet connected to the internet. I went online to try and get help with this issue and downloaded firmware. My comptuer won't even allow me to run the download, it just does nothing when I click on it. Could someone please advise me as to how to get this router to detect my internet connection. Thanks

Who is your Internet Service Provider..?
Are you getting the internet connection,when you connect the computer to the modem directly...?
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link

Similar Messages

Photo Downloader does not detect Thunderbolt connection. Help!

I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
restart photodownloader and try again.
The other option is to use a USB 3.0 or Firewire (both also pretty fast).
The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

WRT150N v1.1 does not recognize internet connection

I have had this router stored since I have never been able to get it working, but today I want to try everything possible, and I have, i upgraded the firmware, i backed up the the configurations, restored the configurations, i power cycled, everything that those pages from linksys support show you, but still easylink advisor does not recognize my internet connection, i am obviously online since i am on this page, so I don't know what it is.
Solved!
Go to Solution.

There is nothing wrong with your router, you should Update Linksys Easylink Advisor

Is there a way of transferring a purchased app from my iMac to my MBA if the MBA does not have internet connection?

I am relatively new to the Mac world, and so please excuse me if this sounds like a dumb question. I have a iMac running 10.6.8 and hard wired, not wireless.
I recently purchased a MAB with the intention of NOT hooking it to the internet but just stand alone, for writing purposes. I needed an app for it, so I purchased it through the app store on the iMac with the intent of transferring to the MAB via flash drive. Now in retrospect, its probably not the way its supposed to happen, due to licence rules, etc. Does anyone have any suggestions on how I can get the app on my MAB or will I have to get it online to do a transfer from the iMac?
Thank you in advance your suggestions.

Apple is relying heavily on the Mac App store to make purchases and install applications. Of course, this requires an Internet connection for all purchases and installs. If you connect the MBA to the App store online, you should be able to download an install an additional copy, provided the MBA and the iMac share ownership information (registration, Apple ID).
Apple's long term plan will just about require all systems to have Internet access to function in app installation and updating, if you buy the Apps from Apple..
Alternatively, some Apps can be copied in whole, by simply copying the particular App folder in the Applications folder of your iMac system, then pasting that App folder in the corresponding Applications folder on your MBA. The rest can't. The reason; they install library and other files elsewhere on the computer. It all depends on the Developer's structure of the App.
You can try the App file copying, and if it does not work, you will simply have to establish an Internet connection for your Air, and use the App store.

Suddenly, my iPad does not have internet connectivity

Despite strong wifi signals - a 4 bar icon at the top left on my Ipad and iTouch - both on my home network and on the network at a friends, my iPad (IOS 4.3.1) and my 2nd gen iTouch (IOS 4.1) both tell me that I am not connected to the Internet. Nor can I send or receive e-mail.
I have reset network setting; I have renewed the lease and have also fogot the network. I have powered off and then powered on. All to no avail.
I am typing this on my wireless G4 Powerbook while connected to my home system, so the problem does not seem to be with the router.
Hopefully this forum can help me solve this.
Thanks.

Quick inquiry. When you go to Settings/General/Network/Wi-Fi and tap the arrow to the right of the network your iPad thinks that it is connected with, what is the IP address? Is it a 169... IP? If so the iPad is not really connected to anything. It has timed out waiting on the router to supply it with a connection and supplied it own self assigned IP.
Carolyn has given you a link to all of Apple's best knowledge Base articles on Wi-Fi, and each of them are often links to more.
I hope that you sort it out.
Dah•veed

ITunes does NOT detect network connection when I use a 3G modem

Hi
since christmas iTunes has not been able to update when i commute, using a 3G USB modem. Over enabled and live WLAN or Ethernet interfaces everything works fine, but TCPdump does not register any packets at all from iTunes when only the USB 3G modem is up. All other networking activities work in this state, but iTunes erronously thinks there is no network and doesn't even initiate network activity.
Seems iTunes tries to be smart by detecting "is there network" by asking something in the OS, rather than trying?
Is this a bug? Am I the only one experiencing this? Is this isolated to my particular 3G modem/ISP? I don't think so...
thanks for any enlightenment,
peter

Hi. Just go a bit further by process of elimination which you've already started. Here's a couple more things you can try.
1. Different USB cable?
2. Try plugging into another computer just to see if your iPhone will get recognised then.
If it still deosn't work then I can only assume that the handset itself has developed some kind of fault, in which case, just book a 'Genius' appointment at your local Apple store asap and get it replaced.

WINDOWS ON IMAC NOT DETECTING INTERNET CONNECTION

I RECENTLY LOADED WINDOWS XP ON MY IMAC AND THE INTERNET CONNECTION IS NOT WORKING, MY MODEM IS ON WITH ALL CORRESPONDING LIGHTS ON, BUT IN XP NO DEAL, WHEN IN MAC OS X EVERYTHING IS FINE
PLS ADVISE

Are you using bootcamp or a VM? If you are using Bootcamp did you install the drivers? If you are using VM did you connect the NIC in the VM interface?

Torch 9810 does not detect USB connection

The USB menu - you know, with the 3 blue boxes ? - has topped coming up when I plug the cable into my BB Torch. I can't load or download anything because the stupid frickin thing doesn't know it's plugged in. Phone makes the little "doo-doop" noise when I plug the USB cable in, but menu does not come up. Battery charge indicator comes on when I plug into a wall outlet, and th ebattery recharges so I know the port works (it's a 2 month old RIM battery). I've tried all 6 USB ports on my computer, and 3 different USB cables - it's not that. I tried a shutdown/restart, didn't help. I did a hard crash/restart by pulling the battery, didn't work. I'm getting pretty gawdamm fed up. Anybody got any ideas?

Hi and Welcome to the Community!
It can be a Drivers Issue:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...
Or ti can be a Administrator issue, it can be a Fire Wall or Antivirus issue.
BlackBerry smartphone or BlackBerry Playbook tablet will not connect to a Windows based computer due to USB Power Management settings
http://www.blackberry.com/btsc/KB13331
Please Advise.
If it helped you, click like.
If my response has helped you, please click "Options" beside my post and mark it as solved.
Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.
Good luck and let us know!

Aperture does not recognize Internet connection with SmugMug

When I try to add an account for SmugMug, the Accounts dialog box shows, "Your computer is not connected to the Internet. Aperture needs an Internet connection to login to SmugMug."
I added a Flickr account with no problems. How can I get Aperture to recognize that I have an Internet connection for SmugMug?

jscorbin wrote:
** Workaround **
The problem appears to be with some routers in the network -- for example my Netgear R6300. When I hooked my iMac (running Mavericks) directly to the cable modem with an Ethernet cable, Aperture was able to authenticate with the SmugMug service (using Safari). The Apple Professional Applications technician suggested trying that, and it worked.
After replacing the original network configuration, where the iMac is connected through the Netgear router, Aperture maintained the SmugMug shared service, and I was able to upload and download photos with SmugMug.
Confirmed that this insane workaround did work. ***, Apple and/or SmugMug? This should be fixed. It doesn't jive with Apple's "ease of use" software mantras.
BTW -- I have a Netgear WNDR4500 v1 in between the world and my Mac.
IronChefMoto
Message was edited by: IronChefMoto

Cs6 install does not see internet connection

Okay, I got Adobe Master Collection CS6 from the school IT dept as part of my program at Sheridan.
It installs okay but when I try to activate it says it cannot connection to my internet connection; which I know is up and running because that's how I'm posting this. I can use the activation response code by going the offline route, but I have to enter it every time I want to launch one of the apps. How do I fix this so I can activate on-line and get rid of this problem?
Thanks.

Have a look here, in particular
3. Check your hosts file.

Ethernet works, wireless does not. Internet connection issues.

This is my very first post, I hope it will be helpful and save people the grief that I went through.
Yesterday, on Wednesday, for some reason my MacBook "AirPort" would show full bars at the top of the screen but when I opened Safari or iTunes, I had no connection. What's weird is that I had never changed the settings since getting my laptop a year ago and they were locked as well.
I connected through Ethernet cable directly into my WRT54G linksys router and the connection was good. What was strange is that my wife's MacBook had no problems connecting wirelessly.
I tried everything I could think of. Rebooting my computer. Restarting the router and cable modem. Tinkering with the TCP/IP numbers. I updated my OS from 10.6.4 to 10.6.5 and updated Safari and iTunes. Nothing worked.
My wife and I went through every single post on the Apple forum discussions site. We tried some interesting things. Putting a $ character before the password. Changing the DNS server numbers. Doing stuff in the unix console. Changing the time on my computer. Nothing worked.
I booted from the Applications disc that my MacBook came with and did the Hardware Diagnostic Test. No hardware issues, thank goodness.
We tried everything we could think of. Finally, I gave in and called the Apple store closest to me, they transferred me over to Apple Support and I spent 2 hours on hold. I got fed up and called, while still on hold with my phone, with my wife's phone. I got a recorded message, "Sorry our offices are closed." That was quite frustrating to hear.
So I got online through my Ethernet connection and booked an appointment at the Apple store to see a Apple Genius. Went to bed hoping that the next day, I could boot my MacBook and wirelessly connect miraculously.
The next day (today), I gave the wireless connection a try. Same problem. Full bars, no connection.
Off to the Apple store.
At the Apple store, my Genius guy connected my MacBook to their store internet wirelessly and then tested the connection. It worked. Then he ran Disk Utility to verify/repair disk permissions.
Apparently, he says he runs Disk Utility once a week to fix disk permission problems on his own computers. Why would I have disk permission problems when I'm the only user on my own computer? He states that when separate programs are run, they all access user permissions and some programs that are buggy alter these permissions or files when they're not suppose to.
Apparently, according to Disk Utility, that's what happened and my permissions thing could not be repaired.
* * * The **ONLY SOLUTION** was a re-installation of system software. * * *
So, I brought my laptop home and did a re-installation. Reboot your laptop with the boot disc the computer came with, by holding down the "C" key after you turn it on. For some reason it took a few minutes just to boot from the boot disk, it felt like I was holding down the "C" key forever. The re-insall took about 50 minutes.
The problem was FIXED.
The only thing that I appear to have lost are the desktop pictures that I downloaded and put in the Library -> Desktop Pictures folder. Everything else appears normal so far.
I'll be running Disk Utility more often from now on. Apple Genius guy says that Disk Utility should be run after booting from the boot disc because it will be more thorough than running it when booting off your laptop.

So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

Does not recognize Internet connection for 1.2.1 update

After updating iTunes to 7.0.2, information tells me there is an iPod update 1.2.1. After I hit either "download and install" or "download only" it informas the of error:
iTunes could not contact the iPod software update server because you are not connected to the internet. Make sure you are connected to the internet"
I am connected! what is the deal?

http://docs.info.apple.com/article.html?artnum=304468

Initial sync between Desktop Manager and 8320 does not recognize internet connection

Am unable to do an initial sync between Desktop Manager and BB Curve 8320. Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again. Tried with version 4.3 and 4.6.0.12. I have a broadband connection that is always on and have also tried wirelessly. Any suggestions are appreciated.

Hi,
First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
After you are down download DM 4.5 with NO MEDIA MANAGER from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Just for trouble shooting purpose, turn off firewall and virus checkers,
Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
Let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

HT4623 iphone does not detect wifi

I have factory unlocked iphone 4s. It can not detect my home wifi. I tried every possible alternatives ...resetting, restarting. Nothings working. It can detect other wifi in the range. My wifi is in good condition. I am using this from my laptop. But only my phone does not detect this connection ?
Please help me out.

WE're going to need a bit more... what steps have you tried... what if any error messages do you get... at what step in the restore does it get blocked.... what happens,,, does it freeze, black out, not restart etc...

HH5 Does not detect my Technomate Box

I've recently switched from a HH3 to a HH5, and now that I have set everything up, the HH5 does not detect a connection to my Technomate satellite box via Ethernet, this was not the problem with my HH3.
Is there any way I can force a connection? Why has the HH5 blocked and detected no connection only to my Technomate Box, when it allows connection to all my other devices such as my PS4, YouView, and 2 Computers?
Help?!
Thanks.

What's the ip address are you getting on the main computer ?

Easylink does not detect internet connection

Similar Messages

Maybe you are looking for