ECM Link to Appraisal Score

On ECC 5.0, we are setting up Enterprise Compensation Management, MBO Appraisals and MSS. We have the appraisals configured to where a form can become 100% completed.  We have ECM configured completely as well.  Our issue is that in our Compensation Planning iView in MSS we cannot figure out how to link the appraisal score to the employees for planning, use in guidelines, etc.  We have activated the standard function module for this link, setup the standard column object to carry over this value, etc.  When viewing the Appraisal column in MSS, each employee has a number 0 as their appraisal score, and we get an error message "No appraisal document found".  Any suggestions would be much appreciated.

Hi,
Checking the following points may help you:
1. In view V_T71ADM20 (IMG activity - Define Matrix Dimensions), there should be 1 dimension for MBO appraisal (MBOA) with Method Parameter as the element (VA, VB or VC) in which the appraisal result will be stored.
2. In the same view V_T71ADM20, pay attention to field Dimension Date Shift. To give an example, if Appraisal document’s end date (e.g. 31-Dec-05) is less than the Compensation Planning begin date (e.g. 01-Jan-06), enter 1 day in this field so that the error "No appraisal document found" doesn’t appear.
3. Check IMG activities Define Guideline Matrices and Assign Matrix Values.
If none of these points help, do give some details of the customization done, in order to get some more clues.
Regards,
Vikas Bhatia

Similar Messages

  • ECM: Appraisal score in Planning I-view

    Hi,
    In the planning I-view you can customize the columns you want to show the user in view V_TWPC_ACOL. My customer would like to have the appraisal score in this view as well. Now the appraisal score is only visable when you go to the detailed employee data screen. Is it possible to have this value as a column in the planning I-view? I noticed that it is possible to create your own column and link it to a function module. Do I need to write a function module to solve this or is there a way within standard SAP?
    Thanks,
    Marco

    S0004446408 wrote:>
    > Do I need to write a function module to solve this or is there >a way within standard SAP?
    > Thanks,
    > Marco
    That is what we did.. created a function module that reads the final rating of the Employee's Appraisal & tied that fm to the Rating column in the OADP..
    I'm not aware of any Std function as yet..
    ~Suresh

  • BADI to implement add link in appraisal process

    hi,
           I want to implement  "add links" in appraisal Process, please suggest me simple way using  BADI.
           Please reply as soon as possible..
    Thanks,
    Hemant

    In appraisal a lot of changes can be made to the standard via Badis. A list of all user exit/Badi available in this functionality can be seen via PHAP_ADMIN  >Utilities menu  >Badi overview
    Hope this info can help you.
    Best Regards

  • PMS viewing of appraisal scores by the appraisee

    Hi Friends,
    I have an question on PMS.
    Currently the performance appraisal scores are visible to employees (appraisees’) immediately after the Appraiser saves the score.
    But the viewing of appraisal scores by the appraisee should be possible only after the appraisal scores are submitted by the appraiser.
    Can any one help on this.
    Regards,
    Rajesh

    Hi Siddharth,
    I have checked below all BADI's, but still no result..
    HRHAP00_ACC_HEADER
    HRHAP00_ACTION_LOG
    HRHAP00_ADD_HEADER
    HRHAP00_ADD_ON_APPL
    HRHAP00_ADMIN
    HRHAP00_ATT_ACCESS
    HRHAP00_AUTHORITY
    HRHAP00_BC_ELEMENT
    HRHAP00_BSP_TMPL
    HRHAP00_BUT_ACCESS
    HRHAP00_CATALOG_ACT
    HRHAP00_CATEG_CREATE
    HRHAP00_CATEG_EXMPLE
    HRHAP00_CHECK_CUSTOM
    HRHAP00_COL_ACCESS
    HRHAP00_COL_OWNER
    HRHAP00_DEFAULT_OBJ
    HRHAP00_DOC_BC
    HRHAP00_DOC_DEF_D1
    HRHAP00_DOC_DEF_D2
    HRHAP00_DOC_DEF_DE
    HRHAP00_DOC_DEF_DN
    HRHAP00_DOC_DEF_DO
    HRHAP00_DOC_DEF_DP
    HRHAP00_DOC_DEF_DR
    HRHAP00_DOC_DEF_DV
    HRHAP00_DOC_DELETE
    HRHAP00_DOC_PREPARE
    HRHAP00_DOC_SAVE
    HRHAP00_DOC_STATNAME
    HRHAP00_DYN_EVENT
    HRHAP00_ENHANCE_DEL
    HRHAP00_ENHANCE_FIX
    HRHAP00_ENHANCE_FREE
    HRHAP00_FOLLOW_UP
    HRHAP00_FOLLOW_UP_D
    HRHAP00_GET_LIST_FLT
    HRHAP00_INIT_CATALOG
    HRHAP00_LINK
    HRHAP00_MAX_P_APPER
    HRHAP00_OFFLINE
    HRHAP00_REP_GEN_VAR
    HRHAP00_REPORTING
    HRHAP00_SELECTION
    HRHAP00_SES_BUSOBJ_AES
    HRHAP00_SMARTFORMS
    HRHAP00_TEXT_SUBST
    HRHAP00_TMPL_608
    HRHAP00_TMPL_EXAMPLE
    HRHAP00_TMPL_GETLIST
    HRHAP00_TMPL_RESTR
    HRHAP00_TMPL_WIZARD
    HRHAP00_VAL_DET
    HRHAP00_VALUE_TYPE
    Regards,
    Rajesh

  • Providing a links in Appraisal

    Hi,
    In Appraisal form How to provide/add an extra field to enter a URL against each criterion.
    Against each criterion in the note (Text) column if i am entering a url it is taking it as normal text instead of URL (Hyperlink) .
    Thnking you in advance

    Hi Maurice and Groetjes,
    Can we customize the "Enhancement: Link for Display" to call SAP transaction/report? if yes, which Badi to use?
    For example, I want to customize a link to display "Last 3 years appraisal result" instead of using the standard "Display Last Document" link?
    Or to call SAP customized report via the customize  link "Display EE details Profile" for example?
    Thanks & Regards,
    VinceSY

  • ECM delink with Appraisal

    Hello,
    As standard the system prompt for missing appraisal document while doing compensation planning through portal. My client doesnt want to have the appraisal to be linked to the compensation module - means that manager should be able to run the compensation planning for an employee who doesnt have an appraisal. After taking out the entry in V_T71ADM14 (Appraisal Rules) on portal its giving error message that no entry in V_T71ADM14 table. We have even taken out the matrix dimension to avoid standard functional module looking for it. Inspite of this we are not able to go forward in compensation planning as system doesnt allow doing compensation planning without appraisal.
    Did anyone had a scenario werein the appraisal should not be considered at all while doing the compensation planning. Inputs will be of great help.
    Regards,
    Brahma

    Hi Brahma,
    If you removed it from the Eligibility Rules (V_T71ADM13) and Guideline Rules (V_T71ADM17) and have the correct combination of these in Assign Compensation Plan Attributes (V_T71ADM03) then no Appraisal should be required.  Please verify each possible combination.  There may be one or more entry combinations that are still requiring the Appraisal. 
    Paul

  • Link missing for appraisal documents in MSS Status overview

    Hi all,
    For ESS Status overview page of Flexible Appraisal document, the appraisal documents are listed with links. when we click the link, its taking to the appraisal document.
    For MSS Status overview page of Flexible Appraisal documents, the appraisal documents are shown as texts and there is no link. (hyperlink). Opening the document is possible only by clicking 'Display' or 'Edit' button.
    I have checked throughout the SDN and unable to find the problem. Our functional team says that the link was appearing before. Could some one help on what configuration is necessary to get the link for appraisal documents in MSS
    Thanks,
    Kothand

    Hi Deepak,
    I think i have not made the details clear. Its not the tag or the text values i am talking about.
    Its the POWL page where i am not able to view the link for appraisal documents .
    Below is our MSS landing page for appraisal document
    [MSS Landing page  - |http://www.freeimagehosting.net/8ad47]
    Below is our ESS landing page for appraisal document
    [ESS Landing page -|http://www.freeimagehosting.net/f3572]
    The hyperlink property is missing in MSS page. I beleive its some IMG configuration or portal configuration missing for MSS.
    Can someone Please throw some light on this
    Regards,
    Kothand

  • Appraisal Documents (WD UI) open the same page in the pop up browser.

    Hi Expert,
        I am using the business package for  Appraisal Documents. I got some problem on navigate to the new browser.
       When the user click on a link in 'Appraisal Documents (WD UI)' in should open a new pop up for Appraisal Document(HAP_MAIN_DOCUMENT), but It open Appraisal Documents (WD UI) again in the new pop up browser.
       I am not sure whether i did it correct or not. Below is the step that i did.
    - Copy Appraisal Documents (WD UI) page and Appraisal Document'(HAP_MAIN_DOCUMENT) to the folder.
    - Change system alias for pages.
    - Add Appraisal Document (WD UI) operation of Employee Business object to Appraisal Documents (WD UI) page.
    - Assign them to the role.
      Could you please suggest. If you have a document about using the page from business package please provide me
    Thank you in advance,
    Noppong Jinbunluphol.

    we kindly recommend you to re-check note 1600380 paying attention to
    point 1.2 which deals with the relevant configuration to ESS for
    flexible process.
    please notice per default role delivery two services two roles for
    Performance Management will be displayed. Both services are named
    Appraisal documents. The difference is that one service is for the
    Predefined Management Process employee access, the other one for the
    configurable/flexible Performance Management employee access. The ESS
    business package is set up in a way that all services/iviews are in
    default role delivery available and customer can choose which one to
    leave in (This is different to MSS where there is an standard role
    delivery and a hidden iview delivery. There the customer can choose
    whether or not to remove existing iviews in standard role delivery or if
    the ones which are hidden shall be made visible in the role).

  • Certview Bug examing score reports

    I was prompted to test Certview Score reporting this following reports of people with difficulties viewing core reports in certview. At around the time of this post i find the following either bugs or IMHO bad behaviours. I am using Chrome Version 23.0.1271.95 m from a Windows Vista PC at this time.
    A am able to get to the Certview - exam history page entitled "Oracle University Exam History"
    I see exams I have taken here under the oracle certification program under both prometric and Pearson Vue ( i don not see earlier exams taken under sun / MySQL before takeover; though I do see them on the certification page, this is all as I would expect).
    So I have a table of exams as follows:
    Test Start Date     Exam Number     Exam Title                      Grade Indicator     Score Report
    17-MAR-10     1Z0-047             Oracle Database SQL Expert      PASS                     View
    ...[1]
    When I click on the 'view' link for the score report on an old exam previously taken under oracle when prometric was the provider I get a pop up Tab page with the message:
    "There are no registrations associated with your student information."
                          _OK_I can understand what is going on here, though the message is not informative.
    [2]
    When I click on view link for score report for the exam above (taken under pearson view) I get a background tab attempting to open with a 'Loading....' message on the tab title ... which goes 'untitled' for an instant and then disappears completely. That tab near reaches foreground and I remain on the exam history page.
    [3] I haven't taken an exam for one taken after the new results regime introduced in november 2012 .... but other forum posters seem to have at least got some issues here. I seem to recall from blog links others were initially unsuccessful but later successful with recently taken exams.
    I am concerned the update to this area may not have been fully tested, and may be pleased to recommend prize of extended visit to Australian Bushtucker trials with opportunity to develop and test escape software from tunnels full of bandicoots. Of course I am unfairly jesting ;-)
    I personnally an not too bothered on this but others may be. I may raise an SR anyway and will leave the number here if I do. I understand it is the weekend, and that software updates take some time to develop and test.
    .....

    user10613194 wrote:
    I have several certifications that I have completed from 2002, 2005 and most recently 2012. I am not able to view the results and get the same error mentioned above :
    "There are no registrations associated with your student information."
    OK
    I don't think this is a browser related issue since I have tried this with Chrome, IE and Mozilla. Can anyone help with the solution to view my old results ?
    Thank you,
    ShashiFor the 2002 and 2005 examinations these will have been with a pre-pearson vue exam provider and the detailed exam results will not be available.
    For the 2012 by best guess you ought to have had a Pearson Vue exam with results available, but their may be exceptions ( eg one thought is might happen if oracle testing ID's were merged). Suggest raise a specific service request with Oracle Certification to investigate. This is new so behaviours will be emerging ... however you have not hit a browser issue here as far as I can tell ).

  • Score system in vendor evaluation

    Hi,
    Please explain how scoring system works in vendor evaluation for criteria Delivery and sub criterias on time delivery and qty reliability.
    Thanks in advance!
    Regards,
    Jana

    Please check these answered links:
    Vendor Evaluation  Score ..
    Vendor Evaluation  Score ...???
    Vendor Evaluation-Delivery Score
    Edited by: Afshad Irani on Apr 21, 2010 1:58 PM

  • Personnel subarea & Appraisal issue

    Dear all,
    Point No: 1
    Generally all the customers/clients code is maintained by the SD module in the table KNA1 with field name KUNNR. In HR all the customers/clients code is maintained in the table T001P, with field name BTRTL.
    In HR we will assign each employee to the respective customer/client, where he is working with the client-(with infotype 0001 as personnel subrea).
    But my client is telling that they want to refer the client code which is created in the SD module instead of assigning to the client code in HR module, they feel it is duplication of work.
    I know there is a way to link my HR module employee to SD module client through infotype 0900, but the problem what I am facing is , If  I link in this way, it is not allowing me to take std different reports based the client as my client is not maintained in HR Module.
    Point No: 2
    The infotype 0025 is used for the performance appraisal, where I have to type the Appraiser Name for each employee. Is there any solution to maintain my entire appraiser name with their designation separately as master, so that I can link my appraiser with their respective subordinates, who are all coming under his supervision?
    It is better to have 100 appraisers to link with 1000 employees rather than in a vice versa. Can any body give me the solution?
    Regards
    Prasad

    Hi,
    I couldn't find a simple solution so have used the FM RH_CHECK_ACC_INPUT to get the parent org unit details.
    Thanks.

  • Multiple Appraisal Documents via Status Overview Portal iView

    Good evening experts,
    We have encountered an issue on our system using both custom BSP and standard SAP Delivered BSP for Performance Management (HAP_DOCUMENT).
    Logon via Manager self service, then select the link to maintain performance documents to open the Status Overview iView (you can view all directly subordinate employees and links to appraisal documents).
    If you select to open two, three, four appraisal documents from the list and have them open simultaneously, we are having an issue for when the manager selects "save" on one of the documents, the header data will all of a sudden display the same appraisee name across all of the open documents.  The data becomes corrupt, and data does not properly save.
    Have any of you encountered this issue before when you have multiple appraisal documents open at the same time?
    Thanks,
    Adam

    Hi
    I guess it happens due to the session of a particular page not expiring , try to delete the cookies from the system and try once more,
    Else you may report a bug to SAP.
    Regards
    Sameer

  • No valid appraisal document found 00000429

    We have Appraisal & ECM configured. Appraisal documents are also created.
    In MSS when I try to do compensation planning, I get the following error -  'No valid appraisal document found 00000429'.
    Can anyone help in this regard?
    Is it because the various dates in ECM i.e. Key date, Effective date etc are not in sync with the Appraisal period or anything?

    I am trying to do an Annual review. The status of appraisal for the selected employee was completed. I approved it and therefore the status changed to Approved. Now the earlier error i.e. - No valid appraisal document found  is gone.
    Instead I am getting the following errors now:
    (1)  Salary Adjustment (Merit) (T): Jordan Micheal does not have a salary structure acc. to basic pay record on 01/01/2010 (00000972)
    (2) Salary Adjustment (Merit) (T): Error calculating compa-ratio of Jordan Micheal on 01/01/2010 (00000972)
    Note:
    In ECM config, we are using MBO appraisal and compa-ratio matrix.
    Edited by: VS on Nov 23, 2010 12:15 PM
    Edited by: VS on Nov 23, 2010 12:21 PM

  • Free Scores do not download or play in soundbooth CS4

    So I just purchased adobe soundbooth cs4 and to my dismay none of the free scores work at all.  There are quite a few listed, but every single time I click play nothing happens.  If i click download, nothing happens either.  I can go to the score bundles and play a few of them.  But all of the score bundles have subitems under their respective catagories.   The free scores have no subitems.  I was promised access to online score content when I purchased this and have no such access.
    PLEASE HELP!

    I suppose you have already tried this, open Sound Booth (CS4 for me) > window>checkmark "scores".  New tab on top left is now available next to "files" tab labled "scores".  This should show you a list of installed scores, 2 come with SB.  To add more simply click on the folder icon labeled "import scores" on the bottom side of scores tab.  navigate to the zipped score file you downloaded and open.   You should see it listed in scores tab now.  double click to play or click on arrow icon on bottom of tab to add to multitrack. You can now delete your zipped file you downloaded or archive it as SB saves the scores elsewhere after import. 
    link to some scores for windows     http://www.adobe.com/support/downloads/product.jsp?product=131&platform=Windows
    I used firefox to download and I run "no scripts" addon which had to be set to allow downloads from adobe before I could download.
    Hope this helps you or someone else who is having difficulties.
    "Always be wary of any helpful item that weighs less than its operating manual."
    Terry Pratchett

  • 6800 GT AGP aquamark 3 scores 1024x768 4xAF VERY HIGH

      Do you find a 8000 graphics score low with 6800 gt AGP?

    Quote from: tstathop2003 on 05-May-05, 01:46:59
    Do you find a 8000 graphics score low with 6800 gt AGP?
    It depends on the Drivers, CPU, RAM ,PSU, Motherboard and general settings of the computer. A lot of factors will come into play as to why the score is so low. It should at least be over 10k, unless it's running in a 3 year old XP or P4 rig, then 8k would be OK.... For what it's worth, I can squeeze 10.5k out of my 6800nu, but that is OCing it to hell and back. The link to my score is in my sig.

Maybe you are looking for

  • Error message when compiling invalid packages and procedures

    Hi. I have a routine for copying certain data from a production database to a test database. To do this I disable constraints and triggers, truncate tables, copy tables and enable triggers and constraints again. Now several of my functions, procedure

  • Install iTunes and Quicktime seperately?

    I already have quicktime installed, and all I'm trying to do is upgrade my current iTunes to 10.1. Every time I try to do this, it gets to the part where it installs quicktime, gets to "computing space requirements" and stops. An error message pops u

  • Trying to change the songs from Ipod to my PC

    i have a problem trying to put song from my ipod to my PC and well is a little complicated because, it says that i actually have to restore it, and if i restore it all my music will be lost. But i don't want it to be lost. I want to buy a new ipod to

  • Want to learn how to track form referrers? Join us at tomorrow's Power Hour

    Tomorrow, Chris Dickey, a Technical Lead at Oracle Marketing Cloud, will host a Power Hour on how to track where contacts are coming from before submitting your form. He'll explain how to achieve this using query strings and a bit of JavaScript. If y

  • OCE WPD driver installation hangs on client workstation

    Hi, We are having issues with a specific driver from OCE. The driver is WPD for an OCE PlotWave 300 on Win7x64. We cannot use another driver since the clients need it for AutoCAD documents. I have been able to add the driver to the driver store witho