Edit issue for Singapore
Hi All,
Country : Singapore
Application : Family
) For the below field are not fetching the data from the backend after clicking Edit button for any subtype in the Overview Screen. But saving at backend is working fine.
Standard Field
Portal Backend
Name of School P0412-SNAME
The above issue i am getting for Standard SAP delivered code.Please could you tell me the solution or any Note
Thanks & Regards
AW
Hello Adam,
Please check in the table V_T588MFPROS or V_T588MFPROSC whether the field is checked on Unused, If so remove that check. then check out the results, please check it for ther respective country version...
Best Regards,
Deepak...
Similar Messages
-
30EA3- 2.*: Weird performance issues for editing objects
Hi,
I noticed weird performance issues for editing objects: when right-clicking on them in the navigator tree and selecting Edit, you get the old progress dialog "Connected to database XXX". This stays on screen a lot longer than it ever did (last sequence I edited over 30 seconds!).
Cancelling displays a "Error retrieving schemas" dialog, but then opens the Edit dialog correctly. No further side effects noticed, so I think sqldev is adding useless overhead here.
If confirmed, can this be bugged and/or fixed by production?
Thanks,
K.Yes, I mean in context of other hangs reported. This one is a nasty performance issue, but IMO the others are real show stoppers.
Atomic steps are easy; any* Edit (object) action inside the context menu of the navigator or the Edit button of the object viewer.
I took a lot of dumps (every second or so) and came to these findings:
Full thread dump Java HotSpot(TM) Client VM (14.2-b01 mixed mode):
"ProgressBarThread" prio=6 tid=0x049de000 nid=0x1674 runnable [0x056ff000]
java.lang.Thread.State: RUNNABLE
at oracle.jdbc.driver.T2CStatement.t2cDefineFetch(Native Method)
at oracle.jdbc.driver.T2CPreparedStatement.doDefineFetch(T2CPreparedStatement.java:818)
at oracle.jdbc.driver.T2CPreparedStatement.executeForRows(T2CPreparedStatement.java:746)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1100)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3425)
- locked <0x1828f7f0> (a oracle.jdbc.driver.T2CConnection)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1202)
at oracle.javatools.db.execute.QueryWrapper.executeQueryImpl(QueryWrapper.java:280)
at oracle.javatools.db.execute.QueryWrapper.access$000(QueryWrapper.java:76)
at oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable.runImpl(QueryWrapper.java:390)
- locked <0x1828f7f0> (a oracle.jdbc.driver.T2CConnection)
at oracle.javatools.db.execute.StatementWrapper$ExecutionRunnable.run(StatementWrapper.java:692)
- locked <0x10c504c0> (a oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable)
at oracle.ideimpl.db.ProgressBarExecutionWrapper.runAndLog(ProgressBarExecutionWrapper.java:136)
at oracle.ideimpl.db.ProgressBarExecutionWrapper.access$000(ProgressBarExecutionWrapper.java:38)
at oracle.ideimpl.db.ProgressBarExecutionWrapper$R.run(ProgressBarExecutionWrapper.java:180)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:619)
"pool-2-thread-2" prio=6 tid=0x06795400 nid=0xa58 waiting on condition [0x073ef000]
java.lang.Thread.State: TIMED_WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x131fded0> (a java.util.concurrent.SynchronousQueue$TransferStack)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:424)
at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
at java.util.concurrent.SynchronousQueue.poll(SynchronousQueue.java:874)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"pool-4-thread-1" prio=6 tid=0x06654400 nid=0xa08 waiting on condition [0x05dff000]
java.lang.Thread.State: TIMED_WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x18334e28> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:1963)
at java.util.concurrent.DelayQueue.take(DelayQueue.java:164)
at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:583)
at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:576)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"WeakDataReference polling" prio=2 tid=0x064de800 nid=0xc58 in Object.wait() [0x0eb3f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x18335088> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:88)
at java.lang.Thread.run(Thread.java:619)
"Background Parser" prio=6 tid=0x04decc00 nid=0x1248 waiting on condition [0x0ea3f000]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:619)
"IconOverlayTracker Timer" prio=6 tid=0x063e5400 nid=0x16fc in Object.wait() [0x076ef000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x180c2840> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"WaitCursor-Timer" prio=6 tid=0x04e39c00 nid=0x910 in Object.wait() [0x074ef000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1792d840> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Native Directory Watcher" prio=2 tid=0x04e38400 nid=0x12b8 runnable [0x062ef000]
java.lang.Thread.State: RUNNABLE
at oracle.ide.natives.NativeHandler.enterWatcherThread(Native Method)
at oracle.ide.natives.NativeHandler$2.run(NativeHandler.java:252)
at java.lang.Thread.run(Thread.java:619)
"Background Parser" prio=6 tid=0x04d86c00 nid=0x12ac waiting on condition [0x061af000]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:619)
"Background Parser" prio=6 tid=0x04d82800 nid=0x1240 waiting on condition [0x05eff000]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:619)
"TextBufferScavenger" prio=6 tid=0x04d81400 nid=0x10ec in Object.wait() [0x05cff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x1729c0a8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x1729c0a8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(TextNode.java:1949)
"BaseTreeExplorer.NodeOpeningExecutor" prio=6 tid=0x04ba0400 nid=0x11bc waiting on condition [0x05aff000]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x131a1910> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"pool-2-thread-1" prio=6 tid=0x04c1c400 nid=0x11b8 waiting on condition [0x059ff000]
java.lang.Thread.State: TIMED_WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x131fded0> (a java.util.concurrent.SynchronousQueue$TransferStack)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:424)
at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
at java.util.concurrent.SynchronousQueue.poll(SynchronousQueue.java:874)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"Scheduler" daemon prio=6 tid=0x04b9a800 nid=0x11b0 in Object.wait() [0x058ff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at oracle.dbtools.raptor.backgroundTask.TaskLinkedList.takeNextTask(TaskLinkedList.java:47)
- locked <0x131a1ba0> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$SchedulerThread.run(RaptorTaskManager.java:422)
"TimerQueue" daemon prio=6 tid=0x0445b000 nid=0x10fc in Object.wait() [0x057ff000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at javax.swing.TimerQueue.run(TimerQueue.java:236)
- locked <0x12f7c028> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:619)
"ChangeSetService" prio=2 tid=0x049d0800 nid=0x1060 in Object.wait() [0x053ff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x12e140c8> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
at java.lang.Object.wait(Object.java:485)
at oracle.jdevimpl.vcs.changeset.ChangeSetService.awaitEvents(ChangeSetService.java:178)
- locked <0x12e140c8> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
at oracle.jdevimpl.vcs.changeset.ChangeSetService.eventLoop(ChangeSetService.java:199)
at oracle.jdevimpl.vcs.changeset.ChangeSetService.access$200(ChangeSetService.java:56)
at oracle.jdevimpl.vcs.changeset.ChangeSetService$2.run(ChangeSetService.java:138)
at java.lang.Thread.run(Thread.java:619)
"TimedCache-Timer" daemon prio=6 tid=0x03af9c00 nid=0x414 in Object.wait() [0x03fdf000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x12869c58> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"JarIndex Timer" daemon prio=6 tid=0x03945400 nid=0x171c in Object.wait() [0x042df000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x127d85a8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"AWT-EventQueue-0" prio=6 tid=0x030f4800 nid=0x1684 in Object.wait() [0x041de000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.awt.EventQueue.getNextEvent(EventQueue.java:479)
- locked <0x127d8658> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:236)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1045)
at java.awt.Dialog$3.run(Dialog.java:1097)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1095)
at java.awt.Component.show(Component.java:1563)
at java.awt.Component.setVisible(Component.java:1515)
at java.awt.Window.setVisible(Window.java:841)
at java.awt.Dialog.setVisible(Dialog.java:985)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:352)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:229)
at oracle.ideimpl.db.ProgressBarExecutionWrapper.execute(ProgressBarExecutionWrapper.java:108)
at oracle.javatools.db.execute.StatementWrapper$ExecutionProxy.doExecute(StatementWrapper.java:647)
at oracle.javatools.db.execute.StatementWrapper$ExecutionProxy.access$200(StatementWrapper.java:585)
at oracle.javatools.db.execute.StatementWrapper.doExecute(StatementWrapper.java:307)
at oracle.javatools.db.execute.QueryWrapper.executeQuery(QueryWrapper.java:215)
at oracle.javatools.db.dictionary.DictionaryDatabase.listObjectsImpl(DictionaryDatabase.java:323)
at oracle.javatools.db.ora.BaseOracleDatabase.listObjectsImpl(BaseOracleDatabase.java:524)
at oracle.javatools.db.AbstractDBObjectProvider.listSchemas(AbstractDBObjectProvider.java:859)
at oracle.ide.db.dialogs.BaseDBEditorFactory.createNamespace(BaseDBEditorFactory.java:503)
at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:357)
at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:332)
at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:54)
at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:314)
at oracle.dbtools.raptor.utils.DataBaseNodeUtil.editNodeWizard(DataBaseNodeUtil.java:45)
at oracle.dbtools.raptor.oviewer.xmleditor.XMLBasedEditor.handleEvent(XMLBasedEditor.java:152)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:531)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:886)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:503)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2475)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
"AWT-Shutdown" prio=4 tid=0x030e6400 nid=0x1680 in Object.wait() [0x040df000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x127d8718> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:619)
"AWT-Windows" daemon prio=6 tid=0x03abb400 nid=0x1610 runnable [0x03edf000]
java.lang.Thread.State: RUNNABLE
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:291)
at java.lang.Thread.run(Thread.java:619)
"Java2D Disposer" daemon prio=10 tid=0x03a97400 nid=0x15f8 in Object.wait() [0x03cdf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x127d8810> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at sun.java2d.Disposer.run(Disposer.java:125)
at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=6 tid=0x030d1c00 nid=0x15dc runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x030cb800 nid=0x15d8 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Attach Listener" daemon prio=10 tid=0x030ca000 nid=0x15d4 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x030c8c00 nid=0x15d0 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=8 tid=0x030b9c00 nid=0x15c8 in Object.wait() [0x0343f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x12770298> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x030b5000 nid=0x15c4 in Object.wait() [0x0333f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x12770320> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x00967800 nid=0x1504 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"VM Thread" prio=10 tid=0x030b1000 nid=0x15c0 runnable
"VM Periodic Task Thread" prio=10 tid=0x030d3c00 nid=0x15e0 waiting on condition
JNI global references: 2645
Heap
def new generation total 12544K, used 6205K [0x10010000, 0x10da0000, 0x12770000)
eden space 11200K, 53% used [0x10010000, 0x105e2ff0, 0x10b00000)
from space 1344K, 18% used [0x10c50000, 0x10c8c7b8, 0x10da0000)
to space 1344K, 0% used [0x10b00000, 0x10b00000, 0x10c50000)
tenured generation total 165468K, used 99280K [0x12770000, 0x1c907000, 0x30010000)
the space 165468K, 59% used [0x12770000, 0x18864308, 0x18864400, 0x1c907000)
compacting perm gen total 50432K, used 50210K [0x30010000, 0x33150000, 0x38010000)
the space 50432K, 99% used [0x30010000, 0x33118aa8, 0x33118c00, 0x33150000)
No shared spaces configured.- In the beginning of the waiting time, the "locked <0x10c504c0>" in the "ProgressBarThread" changed (at least once) to "locked <0x10c51da0>".
- Then halfway the waiting time, the "pool-2-thread-1" disappeared, then "pool-2-thread-2" shortly after.
- Then the "TimedCache-Timer" changed to
"TimedCache-Timer" daemon prio=6 tid=0x03af9c00 nid=0x414 in Object.wait() [0x03fdf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x12869c58> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)- Then near the end, the "locked <0x10c51da0>" in the "ProgressBarThread" changed to "locked <0x10b01da0>", then to "locked <0x10c51da0>".
Hope that helps,
K. -
Item Conversion Template Issue for Oracle Migration - Copy functionality
Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PMIssue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi -
Performance Issue for BI system
Hello,
We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
The Main problem is while running a report or creating a query is taking way too long time.
Kindly help me.Hello SIva,
Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
No one is using the system currently but in ST02 i can see the swaps are in red.
Buffer HitRatio % Alloc. KB Freesp. KB % Free Sp. Dir. Size FreeDirEnt % Free Dir Swaps DB Accs
Nametab (NTAB) 0
Table definition 99,60 6.798 20.000 29.532 153.221
Field definition 99,82 31.562 784 2,61 20.000 6.222 31,11 17.246 41.248
Short NTAB 99,94 3.625 2.446 81,53 5.000 2.801 56,02 0 2.254
Initial records 73,95 6.625 998 16,63 5.000 690 13,80 40.069 49.528
0
boldprogram 97,66 300.000 1.074 0,38 75.000 67.177 89,57 219.665 725.703bold
CUA 99,75 3.000 875 36,29 1.500 1.401 93,40 55.277 2.497
Screen 99,80 4.297 1.365 33,35 2.000 1.811 90,55 119 3.214
Calendar 100,00 488 361 75,52 200 42 21,00 0 158
OTR 100,00 4.096 3.313 100,00 2.000 2.000 100,00 0
0
Tables 0
Generic Key 99,17 29.297 1.450 5,23 5.000 350 7,00 2.219 3.085.633
Single record 99,43 10.000 1.907 19,41 500 344 68,80 39 467.978
0
Export/import 82,75 4.096 43 1,30 2.000 662 33,10 137.208
Exp./ Imp. SHM 89,83 4.096 438 13,22 2.000 1.482 74,10 0
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area 2,22 5.832 22.856 131.072 131.072 IDs 96,61
Page area 1,08 2.832 24.144 65.536 196.608 Statement 79,00
Extended memory 22,90 958.464 1.929.216 4.186.112 0 0,00
Heap memory 0 0 1.473.767 0 0,00
Call Stati HitRatio % ABAP/4 Req ABAP Fails DBTotCalls AvTime[ms] DBRowsAff.
Select single 88,59 63.073.369 5.817.659 4.322.263 0 57.255.710
Select 72,68 284.080.387 0 13.718.442 0 32.199.124
Insert 0,00 151.955 5.458 166.159 0 323.725
Update 0,00 378.161 97.884 395.814 0 486.880
Delete 0,00 389.398 332.619 415.562 0 244.495
Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM -
Error while doing Good Issue for Production Order using BAPI
Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = zptp_s_rf_migo_261-aufnr
IMPORTING
output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gs_header
goodsmvt_code = gs_gmcode
IMPORTING
goodsmvt_headret = gs_headret
TABLES
goodsmvt_item = gt_item
goodsmvt_serialnumber = gt_serial
return = gt_return.
Thanks in Advance.hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM -
Goods Issue for a Return Outbound Delivery for both Sales Returns
Hi gurus..
tell me the approch for the following development....
custom transaction to perform a Goods Issue for a Return Outbound Delivery for both Sales Returns and Consignment Returns (Pickups) process within a lean warehouse in SAP.
it is vry urgnt
thnksI seem to have found the information I required here:
http://wiki.sdn.sap.com/wiki/display/Snippets/Simulating+the+Sales+Cycle+with+BAPI's
I'm going to keep this post active because I'd still like answers to my questions and any advice that you might be willing to share in regards to what I am trying to do.
Edited by: Mikael Nensén on May 18, 2011 3:52 PM -
Date difference issue for Purchase order in R/3 and APO
Hi,
I am sending the purchase order from APO to R/3. When I transfer the data through CIF and see the curresponding entries in stock requirement list in R/3, purchase order is 1 day earlier than in SCM.
However, when this purchase order is CIFed back to SCM, date appears correct in SCM ( as what it was before). Is this something because of timezone that difference in date appears in SCM and R/3.
Can someone who came across date issues for transaction data transfer between SCM and R/3 elaborate in more detail please.
Thanks,
SanjayHello Somnath ,
I am also facing the same issue which sanju was facing earlier in PRs .
In APO I am not able to understand how system calculates the opening , start and end date .In my case the transportation time is 48 hrs , planned delivery time is 1 day and all calenders are 5*24 , GR proceeeing time .01 day . When I am creating PR at destination location on 06/06/2008 , 24:00:00 Hrs . System calculates the dates as follows :-
Start date -06/05/2008 , 00:45:00 , end date -06/06/2008, 24:00:00 , opening date -05/20/2008 ,23:25:00 Hrs . I tried to understand the formula given by you in your reply as Opening Date = Requirement Due Date - GR Time - Planned Delivery Time
Start Date = Requirement Due Date - GR time - Transportation Duration
End date = Requirement Date.
But I am not getting the desired results.
Could you let me know why the system is behaving in such way.I also want to know does system can create orders in such a way the opening date lies in past. If yes then can we restrict that ?
Regards ,
Mukesh
Edited by: Mukesh Kumar on Mar 9, 2008 1:59 PM -
Designing a Field Editable Header for Merging with Exsisting PDF doc
I'm trying to accomplish designing a Field Editable Header so I may merge (import) into an exsisting PDF file to create 1 file.
I have already designed my header in Live Cyle with editable fields. The only issue is when I save it as a PDF file I can't merge this with an existing PDF file to make just 1 PDF document.
I also tried importing the header as a stamp but the issue here is the fields no longer stay editable in my header.
My Business:
What im trying to accomplish is sending out Submittal Sheets (Information Documents) with a professional looking header. I want to make this a simple process were I can open up a PDF document and place in the header (has to be with editable fields) for several PDF documents.
Attached is the header I designed and would like to merge with PDF documents to creat 1 file. Please Note; the header has to still stay editable.
Thanks,
Anyone that can help would be greatley appreciated, James AltoAnd That would require a PC, because LiveCycle Designer does not exist on a Mac and most likely never, ever will.
Or would require The cost of Parallels about $80, Windows 7 upwards of $300 depending upon the version, and what ever Live Cycle designer Cost around $100.00
Or buy a decent PC (not one of the 2-300 dollar jobs that all is good for is using IE) with windows 7 on it. Then get a Copy of Acrobat and Live cycle Designer. -
Why iCal cancel of event edits issue is still not fixed after over 2 years?
Why iCal "cancel of event edits" issue is still not fixed after over 2 years?
I have been in the software engineering industry for over 14 years, but I have never seen a large corporation being so slow at addressing major issues like these.
What would it take for Apple to start working on this issue?Yup. This is fully ridiculous that you can't cancel your updates once you start. I love the tool but this is on pretty significant issue.
Sometimes I accidentally move a mtg or make some edit while viewing and you can't back you!!
If you feel the same way, you should post a note here:
http://www.apple.com/feedback/ical.html
Message was edited by: SteveMc10123 -
IPad 1 internet connection issues for months--connects to modem fine
Was hoping the 4.3 upgrade would solve my issue, but it hasn't. I've had issues with my iPad for the past few months. It connects to my wireless network and works for some time (say a day or two) and then it suddenly cannot connect to the internet. The signal strength is strong. The IP addresses look the same as when it could connect to the internet, my iphone connects just fine (as does my laptop). I've upgraded modem firmware, changed modem login, tried WPA and WPA2, renewed lease on ipad, forgot network, extended my modem lease time, etc. But, I still have issues. I can unplug my modem and then the ipad connects fine...for a while. The only thing which keeps me connected for a while is to turn off my wifi everytime I'm done with my ipad...not exactly what I want to do. Any suggestions out there? Also, I should note that my ipad did not encounter any of these issues for the first 6 months of its life. I'm guessing an OS upgrade created all this nonsense.
turn wifi off on another device. some routers have limits if no result do this
reset network settings
restart your router make sure all lights are off and then come back on
then
reset network settings
settings-general-reset-reset network settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
Peace, Clyde
<Edited by Host> -
Data pump issue for oracle 10G in window2003
Hi Experts,
I try to run data pump in oracle 10G in window 2003 server.
I got a error as
D:\>cd D:\oracle\product\10.2.0\SALE\BIN
D:\oracle\product\10.2.0\SALE\BIN>expdp system/xxxxl@sale full=Y directory=du
mpdir dumpfile=expdp_sale_20090302.dmp logfile=exp_sale_20090302.log
Export: Release 10.2.0.4.0 - Production on Tuesday, 03 March, 2009 8:05:50
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
tion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31650: timeout waiting for master process response
However, I can run exp codes and works well.
What is wrong for my data pump?
Thanks
JIMHi Anand,
I did not see any error log at that time. Actually, it did not work any more. I will test it again based on your emial after exp done.
Based on new testing, I got below errors as
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31671: Worker process DW01 had an unhandled exception.
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06512: at "SYS.KUPC$QUEUE_INT", line 277
ORA-06512: at "SYS.KUPW$WORKER", line 1366
ORA-04030: out of process memory when trying to allocate 65036 bytes (callheap,KQL tmpbuf)
ORA-06508: PL/SQL: could not find program unit being called: "SYS.KUPC$_WORKERERROR"
ORA-06512: at "SYS.KUPW$WORKER", line 13360
ORA-06512: at "SYS.KUPW$WORKER", line 15039
ORA-06512: at "SYS.KUPW$WORKER", line 6372
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS while calling DBMS_METADATA.FETCH_XML_CLOB [PROCOBJ:"SALE"."SQLSCRIPT_2478179"]
ORA-06512: at "SYS.KUPW$WORKER", line 7078
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06500: PL/SQL: storage error
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucpcon: tds)
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucalm coll)
Job "SYSTEM"."SYS_EXPORT_FULL_01" stopped due to fatal error at 14:41:36
ORA-39014: One or more workers have prematurely exited.
the trace file as
*** 2009-03-03 14:20:41.500
*** ACTION NAME:() 2009-03-03 14:20:41.328
*** MODULE NAME:(oradim.exe) 2009-03-03 14:20:41.328
*** SERVICE NAME:() 2009-03-03 14:20:41.328
*** SESSION ID:(159.1) 2009-03-03 14:20:41.328
Successfully allocated 7 recovery slaves
Using 157 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 12911, block 2, scn 7355467494724
cache-low rba: logseq 12911, block 251154
on-disk rba: logseq 12912, block 221351, scn 7355467496281
start recovery at logseq 12911, block 251154, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 185319Kb in 1.73s => 104.61 Mb/sec
Total physical reads: 189333Kb
Longest record: 5Kb, moves: 0/448987 (0%)
Change moves: 1378/5737 (24%), moved: 0Mb
Longest LWN: 1032Kb, moves: 45/269 (16%), moved: 41Mb
Last redo scn: 0x06b0.9406fb58 (7355467496280)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 847056/876618 = 1.0
*** 2009-03-03 14:20:46.062
KCRA: start recovery claims for 35384 data blocks
*** 2009-03-03 14:21:02.171
KCRA: blocks processed = 35384/35384, claimed = 35384, eliminated = 0
*** 2009-03-03 14:21:02.531
Recovery of Online Redo Log: Thread 1 Group 2 Seq 12911 Reading mem 0
*** 2009-03-03 14:21:04.718
Recovery of Online Redo Log: Thread 1 Group 1 Seq 12912 Reading mem 0
*** 2009-03-03 14:21:16.296
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 849220/841000 = 1.0
*** 2009-03-03 14:21:28.468
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
*** 2009-03-03 14:26:25.781
kwqmnich: current time:: 14: 26: 25
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
ktsmgtur(): TUR was not tuned for 360 secs
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:7447M/8185M, Ph+PgF:6833M/9984M, VA:385M/3071M
Instance name: vmsdbsea
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2460, image: ORACLE.EXE (SHAD)
Dynamic strand is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
*** 2009-03-03 08:06:51.921
*** ACTION NAME:() 2009-03-03 08:06:51.905
*** MODULE NAME:(expdp.exe) 2009-03-03 08:06:51.905
*** SERVICE NAME:(xxxxxxxxxx) 2009-03-03 08:06:51.905
*** SESSION ID:(118.53238) 2009-03-03 08:06:51.905
SHDW: Failure to establish initial communication with MCP
SHDW: Deleting Data Pump job infrastructure
is it a system memory issue for data pump? my exp works well
How to fix this issue?
JIM
Edited by: user589812 on Mar 3, 2009 5:07 PM
Edited by: user589812 on Mar 3, 2009 5:22 PM -
Citrix Netscaler AppXpert with Sharepoint 2010 Page Edit Issue
Posting this as a questions and discussion point.
The issue is in using Citrix Netscaler with AppXpert with SharePoint 2010. I've seen this issue for two customers.
Configurations:
- Citrix Netscaler as the load Balancer
- Netscaler AppXpert for SharePoint deployed on Netscaler (using either AppXpert version 1.1 or 2.0)
- SharePoint 2010 Standard or Enterprise editions
Issue:
A SharePoint user with appropriate rights go to a SharePoint page. They choose Edit page, make changes and want to save changes. At this point all SharePoint ribbon options on the top are greyed out. End result, users are not able to make changes to their
site pages. Issue happens for everyone including Farm Admins.
Cases:
a. The users are able to edit and save SharePoint wiki pages if I point user's PC to the SharePoint web server WFE by changing their local host file.
b. On Citrix Netscaler, if I use the traditional load balancing i.e. without Citrix AppXpert, then the users are able to edit and save the pages. That is an option if the customer is using SharePoint 2010 Standard. That is not an option if a customer is
using InfoPath forms. InfoPath is a feature of SharePoint 2010 Enterprise edition. Citrix AppXpert for SharePoint is needed to make the InfoPath work. Else the users get session errors when they use InfoPath Web forms.
c. The issue happens on almost all combination of OS and browser. XP, vista, Win 7, Win8, Win8.1, IE8, 9, 10, 11 and other browsers like chrome etc as well.
Please share your ideas and suggestions.Hi Faisal,
As I understand, the issue will be solved when end users directly connect to SharePoint WFE servers. Since the issue is related to third party products, I'd recommend you contact their support engineer for sufficient resource and assistance. For your convenience:
http://discussions.citrix.com/forum/150-support-forums/
Should you need more assistance, let me know. Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support -
How to display Issues for the projects which user can view in the Project Center View
Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Unable to Edit Dashboards for Weblogic admin
HI,
I just installed and configured OBIEE 11.1.1.6.9 and OBIA 7.9.6.4
I was trying to edit Dashboard but when i click page Options (small icon top right handside) i did found 'Edit Dashboard' further when to catalog and tried to edit Analysis & prompt a message appeared 'Access Denied'. as it shows its a privileges issues for user. But while installation i created one user 'weblogic' and this user is having all privileges i checked in console & em. so my question is how i can edit these analysis or how i can fix this issue.
OBIEE version: 11.1.1.6.9
OBIA: 7.9.6.4
OBIEE & OBIA O.S: windows 2008 server SP2
Regards
Sher ullah baig1.Stop the Presentation Server.
2.Backup the instanceconfig.xml file at [middleware_home]/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml
3.Under the 'Catalog' section, add the 'Recover' tag. For Example:
<Catalog>
<UpgradeAndExit>false</UpgradeAndExit>
<UpdateAccountGUIDs>Recover</UpdateAccountGUIDs>
</Catalog>
4.Start the Presentation Server. It will perform a recovery and then after some time shutdown.
5.Remove the tag.
6.Start the Presentation Server again
Hope this helps. Let us know if you still have issues.
Thanks,
SVS -
SQL Server 2008r2 issue for w8.1
Hi,
I am getting sql server 2008r2 compatibility issue for w8.1 whenever I try to installed it.Please check the attached screen shoot given bellowYou must read
Hardware and software requirements for SQl Server 2008 r2 before proceeding. You did not told edition of SQL server you are trying to install on windows 8.
Enterprise edition is not supported on windows 8
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles
Maybe you are looking for
-
Problem while updating multiple records through standard RFC
HI all, I am doing multiple object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
-
Can't find my Podcast in Apple Store
I have successfully uploaded the xml-file for my podcast and Apple told me that it has been approved: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=202329789 However, I can't find it in the Apple store using the search butto, neith
-
Slide with no audio playing audio
I'm using Captive 4. My intro slide has no audio, yet when I publish and view the SWF, it plays two key clicks. I set that slide to stop the background audio (even though there is none) and I still hear the clicks. Any help with getting this to stop
-
Aperature and iPhoto Library does not share properly
I have the latest version of Aperture, iPhoto and also have Maverick installed. After sorting trrough 30,000 photos and getting it down to half of that and put all the photos into events. But when I open Aperture, it still has photos all spread over
-
IS Retail-Recipient Driven Merchandise distribution Flow through
Hi On receipt of goods how the delivery document is created automatically for the recipient driven flow through . Now for me In WF60 delivery document is not getting craeted says "No processing doc found" .How the automatic delivery document is getti