Editing fields on output of alv report format

Dear friends,
I created on report in alv format but user wants to edit the field on the output of that format also it's effect is on the next field should br done.
e.g. if in first field is 10 in next field user edit and enter the value 20 then automatically next field will appered as a 20 * 10 = 200 i.e what to do to collect that 200 in the next field automatically.
how to do it?
Thanks ,
Vishal Bhagwat,

Hi,
Refer these standard alv programs
BCALV_EDIT_01                  Switch on and off the ready-for-input status of
BCALV_EDIT_02                  Define ready-for-input status at cell level
BCALV_EDIT_03                  Verification of modified cells
BCALV_EDIT_04                  Delete and append rows
BCALV_EDIT_05                  Checkboxes
BCALV_EDIT_06                  Dropdown Listbox at Column Level
BCALV_EDIT_07                  Dropdown Listbox at Cell Level
BCALV_EDIT_08                  Integrate Non-Standard F4 Help
BCALV_FIELDCAT_TEST            Edit field catalog online
BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_GRID_EDIT_DELTA          Example Report for F4 Help of the ALV Grid
BCALV_GRID_EDIT_DELTA_APPL
Regards,
Prashant

Similar Messages

Output of ALV report as attachment in email

Dear all ,
I would like to send output of ALV report as attachment in email.
i already written code for this using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
I can able to send list output as HTM format. But I want to send ALV report output
As a attachment. How can I do this.please explain
Thanks in advance
Regards
Manohar

Hello,
U can sent like this.
Check this report
REPORT ZV_SEND_MAIL .
TABLES: EKKO.
PARAMETERS: P_EMAIL   TYPE SOMLRECI1-RECEIVER
                                  DEFAULT '[email protected]'.
TYPES: BEGIN OF T_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
      WA_EKPO TYPE T_EKPO.
TYPES: BEGIN OF T_CHAREKPO,
EBELN(10) TYPE C,
EBELP(5) TYPE C,
AEDAT(8) TYPE C,
MATNR(18) TYPE C,
END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.
DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_CNT TYPE I,
        W_SENT_ALL(1) TYPE C,
        W_DOC_DATA LIKE SODOCCHGI1,
        GD_ERROR    TYPE SY-SUBRC,
        GD_RECIEVER TYPE SY-SUBRC.
*START_OF_SELECTION
START-OF-SELECTION.
*   Retrieve sample data from table ekpo
PERFORM DATA_RETRIEVAL.
*   Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                               TABLES IT_MESSAGE
                                      IT_ATTACH
                                USING P_EMAIL
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             CHANGING GD_ERROR
                                      GD_RECIEVER.
*   Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
   UP TO 10 ROWS
    FROM EKPO
    INTO TABLE IT_EKPO.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
*       Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
             CON_TAB TYPE X VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
    CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
                WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
           INTO IT_ATTACH SEPARATED BY CON_TAB.
    CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
    APPEND IT_ATTACH.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
*       Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
                                          PIT_ATTACH
                                    USING P_EMAIL
                                          P_MTITLE
                                          P_FORMAT
                                          P_FILENAME
                                          P_ATTDESCRIPTION
                                          P_SENDER_ADDRESS
                                          P_SENDER_ADDRES_TYPE
                                 CHANGING P_ERROR
                                          P_RECIEVER.
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = W_DOC_DATA
            PUT_IN_OUTBOX              = 'X'
            SENDER_ADDRESS             = LD_SENDER_ADDRESS
            SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
            COMMIT_WORK                = 'X'
       IMPORTING
            SENT_TO_ALL                = W_SENT_ALL
       TABLES
            PACKING_LIST               = T_PACKING_LIST
            CONTENTS_BIN               = T_ATTACHMENT
            CONTENTS_TXT               = IT_MESSAGE
            RECEIVERS                  = T_RECEIVERS
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
*       Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
                WITH OUTPUT = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
*        Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM.                    " POPULATE_EMAIL_MESSAGE_BODY
If useful reward.
Vasanth

How to create field catalog using field-symbols in normal alv report?

hi all,
how to create field catalog using field-symbols in normal alv report? i.e, using function modules...reuse_alv_list_display/grid_display?
regards,
jack

HI
LIKE THIS
TYPE-POOLS : slis.
DATA : t_fieldcat TYPE slis_t_fieldcat_alv,
       st_fieldcat TYPE slis_fieldcat_alv.
st_fieldcat-fieldname     = 'STATUS'.
st_fieldcat-seltext_l     = 'STATUS INDICATOR'.
st_fieldcat-outputlen     = 17.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'VBELN'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Sales Document No.'.
st_fieldcat-outputlen     = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'AUDAT'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Document Date'.
st_fieldcat-outputlen     = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'VBTYP'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Document Type'.
st_fieldcat-outputlen     = 4.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'AUART'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Category'.
st_fieldcat-outputlen     = 1.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'AUGRU'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Reason'.
st_fieldcat-outputlen     = 3.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'NETWR'.
st_fieldcat-do_sum        = 'X'.
st_fieldcat-seltext_l     = 'Net Amount'.
st_fieldcat-outputlen     = 15.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'WAERK'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Unit'.
st_fieldcat-outputlen     = 5.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
*sortinfo
st_sort-fieldname = 'AUART'.
st_sort-up        = 'X'.
st_sort-subtot    = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBTYP'.
st_sort-up        = 'X'.
st_sort-subtot    = ' '.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'WAERK'.
st_sort-up        = 'X'.
st_sort-subtot    = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBELN'.
st_sort-up        = ' '.
st_sort-subtot    = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type     = 0
   IMPORTING
     et_events       = it_eventcat
   EXCEPTIONS
     list_type_wrong = 1
     OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF grid = 'X'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
     I_INTERFACE_CHECK                 = ' '
     I_BYPASSING_BUFFER                = ' '
     I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = g_program
      I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
     I_CALLBACK_HTML_END_OF_LIST       = ' '
     I_STRUCTURE_NAME                  =
     I_BACKGROUND_ID                   = ' '
     I_GRID_TITLE                      =
     I_GRID_SETTINGS                   =
     IS_LAYOUT                         =
       it_fieldcat                       = t_fieldcat
     IT_EXCLUDING                      =
     IT_SPECIAL_GROUPS                 =
      it_sort                           = t_sort
     IT_FILTER                         =
     IS_SEL_HIDE                       =
     I_DEFAULT                         = 'X'
     I_SAVE                            = ' '
     IS_VARIANT                        =
     IT_EVENTS                         =
     IT_EVENT_EXIT                     =
     IS_PRINT                          =
     IS_REPREP_ID                      =
     I_SCREEN_START_COLUMN             = 0
     I_SCREEN_START_LINE               = 0
     I_SCREEN_END_COLUMN               = 0
     I_SCREEN_END_LINE                 = 0
     I_HTML_HEIGHT_TOP                 = 0
     I_HTML_HEIGHT_END                 = 0
     IT_ALV_GRAPHICS                   =
     IT_HYPERLINK                      =
     IT_ADD_FIELDCAT                   =
     IT_EXCEPT_QINFO                   =
     IR_SALV_FULLSCREEN_ADAPTER        =
   IMPORTING
     E_EXIT_CAUSED_BY_CALLER           =
     ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = it_final
      EXCEPTIONS
        program_error                     = 1
        OTHERS                            = 2
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
REWARD IF USEFULL

How to display the editable fields in output of an ALV report?

Hi all,
I have a requirement of displaying values in ALV Grid format and above this grid display i have to put some fields , that are editable.
I know making ALV grid fields as editable, but here requirement is to display some fields before displaying the ALV grid dispaly and to enable these fields editable to user and when printing this the values entered by user also has tobe printed.
Please help me on solving this problem? Is it possible to do this with ALV function modules?
Thanks,
Vamshi.

Hi all,
Thanks for your replies.
But this is not my requirement. I mentioned in my question that i too know how to edit the fields in ALV grid report.
Here my requirement is .
name :_____________
amount:____________
alv grid display
Like above i need to display. after name the user can be enter value and after amount also the user can be enter some value at output . But this is not the header of ALV .
Is this possible in classical ALV or Classical report? If not please specify alternative?
Thanks,
Vamshi.

How to make checkbox field inactive in the output of ALV report.

Dear All,
I am having one ALV report in whose output there are checkboxes against each record. Example: the output columns of my ALV report are:
Checkbox, Sales Document No, Billing Document No.
Now, my requirement is that if for the Sales Document No there exists any Billing Document No in the output then the Checkbox should be inactive but if the Billing document coloumn is empty for a particular Sales Document No then only the Checkbox field should become active.
Kindly guide me on how to make this checkbox field inactive.
Waiting for your reply.
Warm Regards,
N.Jain

Hello,
Follow the below steps:
1.Define as--> GS_STATUS TYPE SLIS_STATUS,
2.check layout check box fieldname is not initial.
then set the status according to your logical conditions
GS_STATUS-FLG_CHECKBOXES_ACTIVE = 'X'
Hope this would help you.
Let me know your feedback.
Regards,
Raju

Regarding downlaod the output from ALV grid format

Hi
i want to download the output ALV grid format into excel sheet .
but condition is when ever user press the button (&ZDL) the should be downloaded.
and also how to convert the output into CSV format.

hi,
when '&ZDL'.
use this condition
check this one for down loading
try to download an ALV report in excel format using (list ->export -> local file-> soread sheet )
Re: advantages of alv reports
Excel Download to ALV report
hi this is full program
REPORT ZCR_BOMPLANT_DOWNLOAD.
TABLES : MAST , "Material to BOM Link
STKO , "BOM Header
MARA . "General Material Data
TYPES : BEGIN OF TY_MASTER ,
MATNR TYPE MAST-MATNR , "Material Number
WERKS TYPE MAST-WERKS , "Plant
STLAN TYPE MAST-STLAN , "BOM Usage
STLNR TYPE MAST-STLNR , "Bill of material
STLAL TYPE MAST-STLAL , "Alternative BOM
ANDAT TYPE MAST-ANDAT , "Date record created on
AEDAT TYPE MAST-AEDAT , "Date of Last Change
AENAM TYPE MAST-AENAM , "Name of Person Who Changed Object
STLST TYPE STKO-STLST , "BOM status
ZPLP1 TYPE MBEW-ZPLP1 , "Future Planned Price 1
DWERK TYPE MVKE-DWERK , "Delivering Plant (Own or External)
END OF TY_MASTER .
TYPES : MY_TYPE(20) TYPE C.
DATA : IT_MASTER TYPE STANDARD TABLE OF TY_MASTER,
WA_MASTER TYPE TY_MASTER .
DATA : IT_HEADER TYPE TABLE OF MY_TYPE.
DATA : W_PTH TYPE RLGRAP-FILENAME.
DATA : W_FILE TYPE RLGRAP-FILENAME.
*--- Add Header Fields to Header Table ---
APPEND 'Material Number' TO IT_HEADER .
APPEND 'Plant' TO IT_HEADER .
APPEND 'BOM Usage' TO IT_HEADER .
APPEND 'Bill Code' TO IT_HEADER .
APPEND 'Alternative BOM' TO IT_HEADER .
APPEND 'Created On' TO IT_HEADER .
APPEND 'Changed On' TO IT_HEADER .
APPEND 'Changed By' TO IT_HEADER .
APPEND 'BOM Status' TO IT_HEADER .
APPEND 'Planned Price' TO IT_HEADER .
APPEND 'Delivery Plant' TO IT_HEADER .
IF SY-MANDT = '700'.
W_PTH = '
lkdb01\ISD\IS\Software Developments\Developments\Data Files\SAP Dumps\BOM_Available\'.
ELSE.
W_PTH = 'C:\'.
ENDIF.
START-OF-SELECTION.
*--- Load Data to Internal Table ---
SELECT MASTMATNR MASTWERKS MASTSTLAN MASTSTLNR MASTSTLAL MASTANDAT MASTAEDAT MASTAENAM STKO~STLST
INTO TABLE IT_MASTER
FROM MAST
INNER JOIN STKO ON STKOSTLNR EQ MASTSTLNR
AND STKOSTLAL EQ MASTSTLAL
INNER JOIN MARA ON MARAMATNR EQ MASTMATNR
WHERE MARA~MTART LIKE 'ZFG%'
AND STKO~LKENZ NE 'X'
AND STKO~LOEKZ NE 'X'
AND STKO~STLST EQ '1'.
SELECT MAST~MATNR MAST~WERKS MAST~STLAN MAST~STLNR MAST~STLAL MAST~ANDAT MAST~AEDAT MAST~AENAM STKO~STLST MBEW~ZPLP1 MVKE~DWERK
INTO TABLE IT_MASTER
FROM MAST
INNER JOIN STKO ON STKO~STLNR EQ MAST~STLNR
AND STKO~STLAL EQ MAST~STLAL
INNER JOIN MARA ON MARA~MATNR EQ MAST~MATNR
INNER JOIN MBEW ON MBEW~MATNR EQ MAST~MATNR
AND MBEW~BWKEY EQ MAST~WERKS
INNER JOIN MVKE ON MVKE~MATNR EQ MAST~MATNR
WHERE MARA~MTART LIKE 'ZFG%'
AND STKO~LKENZ NE 'X'
AND STKO~LOEKZ NE 'X'
AND STKO~STLST EQ '1'.
IF SY-SUBRC <> 0.
MESSAGE I014(ZLOAD).
ENDIF.
*--- Set Path to Function Module ---
CONCATENATE W_PTH SY-DATUM ' - ' 'BOM_AVAILABLE_PLANT.XLS' INTO W_FILE.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = W_FILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = IT_MASTER
FIELDNAMES = IT_HEADER
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_EIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
SUBMIT ZI005_MARA_DUMP_SOLIDEAL_N.
MESSAGE I023(ZLOAD) WITH text-001.
ELSE.
MESSAGE I022(ZLOAD) WITH W_FILE. "Errors while downloading.
ENDIF.
END-OF-SELECTION.
SUBMIT ZI005_MARA_DUMP_SOLIDEAL_N.

How to 'EDIT field in a block AlV"

<b>Hi Experts.
i am having a small query . i want to display some output in the block alv.
After that i want one field in that Block Alv to be filled by the user and then i
want to do further calculation depending upom that field..
please provide me support in this regard with coding part..
An early reply will be highly appreciated...
Regards.
Neeraj</b>

Hi,
This is the sample program for displaying the two blocks in alv report.
REPORT YMS_ALVBLOCK.
Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:SLIS.
DATA:X_LAYOUT TYPE SLIS_LAYOUT_ALV,
T_FIELD TYPE SLIS_T_FIELDCAT_ALV,
*--field catalog
X_FLDCAT LIKE LINE OF T_FIELD,
*--to hold all the events
T_EVENTS TYPE SLIS_T_EVENT,
X_EVENTS TYPE SLIS_ALV_EVENT,
T_SORT TYPE SLIS_T_SORTINFO_ALV,
X_SORT LIKE LINE OF T_SORT ,
*--Print Layout
X_PRINT_LAYOUT TYPE SLIS_PRINT_ALV.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE ADD_CATALOG.
CLEAR X_FLDCAT.
X_FLDCAT-FIELDNAME = &1.
X_FLDCAT-SELTEXT_M = &2.
X_FLDCAT-OUTPUTLEN = &3.
X_FLDCAT-TECH = &4.
X_FLDCAT-COL_POS = &5.
X_FLDCAT-NO_ZERO = 'X'.
X_FLDCAT-DDICTXT = 'M'.
X_FLDCAT-DATATYPE = &6.
X_FLDCAT-DDIC_OUTPUTLEN = &7.
IF &6 = 'N'.
    X_FLDCAT-LZERO = 'X'.
ENDIF.
*--build field catalog
APPEND X_FLDCAT TO T_FIELD.
END-OF-DEFINITION.
*----- data declerations.
DATA: V_REPID LIKE SY-REPID.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERNAM LIKE MARA-ERNAM,
MEINS LIKE MARA-MEINS,
END OF ITAB.
DATA: BEGIN OF JTAB OCCURS 0,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
END OF JTAB.
SELECT MATNR ERNAM MEINS
UP TO 20 ROWS
FROM MARA
INTO TABLE ITAB.
SELECT MATNR MAKTX
UP TO 20 ROWS
FROM MAKT
INTO TABLE JTAB.
V_REPID = SY-REPID.
*DISPLAY alv
Initialize Block
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    I_CALLBACK_PROGRAM = V_REPID.
*Block 1:
*INITIALIZE
REFRESH T_FIELD. CLEAR T_FIELD.
REFRESH T_EVENTS.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
ADD_CATALOG:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
X_EVENTS-FORM = 'TOP_OF_LIST1'.
X_EVENTS-NAME = SLIS_EV_TOP_OF_LIST.
APPEND X_EVENTS TO T_EVENTS.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                  = X_LAYOUT
    IT_FIELDCAT                = T_FIELD
    I_TABNAME                  = 'ITAB'
    IT_EVENTS                  = T_EVENTS
    IT_SORT                    = T_SORT
TABLES
    T_OUTTAB                   = ITAB
EXCEPTIONS
    PROGRAM_ERROR              = 1
    MAXIMUM_OF_APPENDS_REACHED = 2
    OTHERS                     = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
REFRESH T_FIELD. CLEAR T_FIELD.
REFRESH T_EVENTS.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
ADD_CATALOG:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
X_EVENTS-FORM = 'TOP_OF_LIST2'.
X_EVENTS-NAME = SLIS_EV_TOP_OF_LIST.
APPEND X_EVENTS TO T_EVENTS.
Append table block.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                  = X_LAYOUT
    IT_FIELDCAT                = T_FIELD
    I_TABNAME                  = 'JTAB'
    IT_EVENTS                  = T_EVENTS
TABLES
    T_OUTTAB                   = JTAB
EXCEPTIONS
    PROGRAM_ERROR              = 1
    MAXIMUM_OF_APPENDS_REACHED = 2
    OTHERS                     = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
exporting
is_print = x_print_layout
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form top_of_list1
      text
FORM TOP_OF_LIST1.
SKIP 1.
WRITE: 10 'List 1',
/5 '----
SKIP 1.
FORMAT RESET.
ENDFORM.                    "top_of_list1
*&      Form top_of_list2
      text
FORM TOP_OF_LIST2.
SKIP 1.
WRITE: 10 'List 2',
/5 '----
SKIP 1.
FORMAT RESET.
ENDFORM.                    "top_of_list2
Thanks,
Shankar

ALV Report Format Problem

Hi Experts
I am writing an ALV report for the following report below , I am not getting the output in the internal table
can anyone correct please
regards
Piroz
REPORT Z_ROLE LINE-SIZE 220 LINE-COUNT 75
         NO STANDARD PAGE HEADING.
TABLES : agr_tcodes,
         agr_users,
         tstct.
TYPE-POOLS : slis.
DATA: repid LIKE sy-repid, "Report ID
is_layout TYPE slis_layout_alv, "Layout For ALV
it_fieldcat TYPE slis_t_fieldcat_alv, "ITAB for field
it_events TYPE slis_t_event, "ITAB for event
it_sub TYPE slis_layout_alv_spec1, "subtotals
i_header TYPE slis_t_listheader, "Itab for listheader
lt_sort TYPE slis_t_sortinfo_alv, "itab for sorting
wa_sort LIKE LINE OF lt_sort." slis_t_sortinfo_alv.
DATA: BEGIN OF itab OCCURS 0 ,
         agr_tcodes type agr_tcodes-tcode ,        " Transaction code     A
         agr_name   type agr_tcodes-agr_name,      " Role Name            B
       END OF itab .
DATA: BEGIN of it_disp Occurs 0 ,
         agr_tcodes type agr_tcodes-tcode ,        " Transaction code     A
         agr_name   type agr_tcodes-agr_name,      " Role Name            B
         agr_uname type agr_users-uname,          " Short User Name     B
         ttext      type tstct-ttext,              " Description Name    C
         sprsl      type tstct-sprsl ,             " Language            c
       END OF it_disp.
*DATA: i_data TYPE TABLE OF ty_data, " internal table
*wa_data TYPE ty_data. " work area
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_tcode FOR agr_tcodes-tcode OBLIGATORY, "no-extension no intervals,
                u_name for agr_users-uname,
                r_name for agr_users-uname .
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
START-OF-SELECTION.
PERFORM get_data.
PERFORM modify_data.
PERFORM disp_data .
END-OF-SELECTION.
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data .
select agr_tcodestcode agr_tcodesagr_name agr_usersuname tstctttext tstct~sprsl
into table it_disp
from agr_tcodes
inner join agr_users
on agr_tcodesagr_name = agr_usersagr_name
inner join tstct
on agr_tcodestcode = tstcttcode
and
tstct~sprsl eq 'E'.
ENDFORM. "get_data
*& Form modify_data
text
--> p1 text
<-- p2 text
FORM modify_data .
MOVE-CORRESPONDING itab TO it_disp.
APPEND it_disp.
CLEAR it_disp.
ENDFORM. " modify_data
*& Form Disp_data
text
--> p1 text
<-- p2 text
FORM disp_data .
PERFORM fill_layout_structure.
PERFORM fill_field_catalog_table.
PERFORM alv_header USING i_header.
PERFORM call_alv_function.
ENDFORM. " Disp_data
*& Form fill_layout_structure
text
--> p1 text
<-- p2 text
FORM fill_layout_structure .
CLEAR is_layout.
is_layout-colwidth_optimize = 'X'.
is_layout-zebra = 'X'.
is_layout-no_input = 'X'.
is_layout-colwidth_optimize = 'X'.
is_layout-totals_text = 'Totals'(201).
is_layout-totals_only = 'X'.
is_layout-zebra = 'X'.
is_layout-group_change_edit = 'X'.
is_layout-header_text = 'Wagners Users Transaction Code'.
ENDFORM. " fill_layout_structure
*& Form fill_field_catalog_table
text
--> p1 text
<-- p2 text
FORM fill_field_catalog_table .
DATA : gls1(10).
BREAK-POINT.
PERFORM fill_field_catalog USING :
'agr_tcode' 'Trans Code .' '10' 'IT_DISP' space space 'C11' ' ' ' ',
'agr_name' 'Name' '40' 'IT_FINAL' space space 'C11' ' ' ' ' ,
'agr_uname' 'Role' '60' 'IT_FINAL' space space 'C11' 'X' ' ',
'ttext' 'Descript' '80' 'IT_FINAL' space space 'C11' ' ' ' '.
ENDFORM. " fill_field_catalog_table
*& Form fill_field_catalog
text
FORM fill_field_catalog USING f d l t s z y a b.
DATA t_fld TYPE slis_fieldcat_alv.
STATICS pos LIKE sy-index VALUE 0.
pos = pos + 1.
CLEAR t_fld.
MOVE 1 TO t_fld-row_pos.
MOVE pos TO t_fld-col_pos.
MOVE f TO t_fld-fieldname.
MOVE d TO t_fld-seltext_m.
MOVE l TO t_fld-outputlen.
MOVE t TO t_fld-tabname.
MOVE s TO t_fld-do_sum.
MOVE z TO t_fld-no_zero.
MOVE y TO t_fld-emphasize.
MOVE a TO t_fld-no_out.
MOVE b TO t_fld-no_sum.
APPEND t_fld TO it_fieldcat.
ENDFORM. " fill_field_catalog
*& Form alv_header
text
-->P_I_HEADER text
FORM alv_header USING p_i_header.
DATA: wa_line TYPE slis_listheader.
CLEAR wa_line.
wa_line-typ = 'H'.
wa_line-info = 'Wagners Investment'.
APPEND wa_line TO i_header.
ENDFORM. " alv_header
*& Form call_alv_function
text
--> p1 text
<-- p2 text
FORM call_alv_function .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_CALLBACK_PF_STATUS_SET = ' '
IS_LAYOUT = IS_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
t_outtab = IT_DISP.
IF sy-subrc eq 0.
ENDIF.
ENDFORM. " call_alv_function

Hi Venkat
Thanks a lot for correcting and sending me the format , Now I can manage to change the other reports too.
I have one more report which is bashing my head like anything , This is basically a fuel calculation report for managment , I want to change this too in ALV FORMAT, I did all my efforts to correct but it is looping inside as i close the report.
Thanks in Advanced
REPORT Z_ESLP_ZFCR1 LINE-SIZE 220 LINE-COUNT 75
         NO STANDARD PAGE HEADING.
TABLES : equi,
equz,
imptt,
imrg,
eqkt,
iloa.
type-pools: slis. "ALV Declarations
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
TYPES: BEGIN OF ty_data ,
equnr type equnr, " Euipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
idate type imrg-idate, " Measuring Date
recdu type imrg-recdu, " Unit of measuring ='KM','L','H'
recdv type imrg-recdv, " Counter reading data
cancl type imrg-cancl,
END OF ty_data.
TYPES: BEGIN OF ty_final,
equnr type equnr, " Equipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
idate type imrg-idate, " Measuring Date
min_date_km type imrg-idate, " Min Date
min_km type P DECIMALS 2, " Max Km
max_date_km type imrg-idate,
max_km type P DECIMALS 2, " Min km
t_max_min_km type P DECIMALS 2, " Total min_km-max_km
min_date_hr type imrg-idate, " Max Date
min_hr type P DECIMALS 2, " Max hr
max_date_hr type imrg-idate,
max_hr type P DECIMALS 2, " Min hr
t_max_min_hr type P DECIMALS 2, " Total min_hr-max_hr
min_date_lit type imrg-idate,
min_lit type P DECIMALS 2, " Min lit
max_date_lit type imrg-idate,
max_lit type P DECIMALS 2, " Max lit
fuel_con type imrg-recdv, " Total_hrs / t_max_min_hr
fuel_con2 type P DECIMALS 2, " Total_hrs / t_max_min_hr
km_l type P DECIMALS 2, " t max_min_km / t_max_min_lit
l_p type P DECIMALS 2 , " t_max_min_lit / t_max_min_hr
l_p2 type P DECIMALS 2 ,
END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr OBLIGATORY, "no-extension no intervals,
p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
"p_recdu FOR imrg-recdu." NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/55(40) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' VEHICLE FUEL CONSUMPTION REPORT ' CENTERED ,
2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Equipment No :'left-justified,p_equnr-low color 2 , ' to ' , p_equnr-high color 2.
write: /2 'Date From :', p_idate-low color 2 , ' to ' , p_idate-high color 2.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate and
e~cancl ne 'X'.
loop at i_data into wa_data.
CLEAR: wa_final.
READ TABLE i_final into wa_final
with key equnr = wa_data-equnr." BINARY SEARCH.
if sy-subrc EQ 0.
PERFORM F_GET_MAX_DATA.
PERFORM F_GET_MAX_HOURS.
PERFORM F_GET_MAX_LIT.
PERFORM prepare_final_rec USING'M'. " Modify Existing Record
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
ElSE.
PERFORM prepare_final_rec USING'A'. " Append New Record.
ENDIF.
ENDLOOP.
LOOP AT i_final into wa_final.
on change of wa_final-equnr.
perform build_fieldcatalog.
endon.
uline.
endloop.
refresh i_final.
clear i_final.
FORM F_GET_MAX_DATA.
select single MAX( eidate ) Min( eidate ) MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_date_km,wa_final-min_date_km,wa_final-max_km ,wa_final-min_km)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'KM'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM F_GET_MAX_HOURS.
select single MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_hr, wa_final-min_hr)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'H'
AND a~equnr = wa_data-equnr .
ENDFORM.
FORM F_GET_MAX_LIT.
select SUM( e~recdv )
into corresponding fields of (wa_final-fuel_con2)
from equi AS a
inner join eqkt as b
on bequnr = aequnr
inner join imptt as c
on cmpobj = aobjnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'L'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM prepare_final_rec USING p_mode TYPE char1.
wa_final-t_max_min_km = wa_final-max_km - wa_final-min_km .
wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
if wa_final-t_max_min_km eq 0 .
wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ) .
ELSE.
wa_final-km_l = 0.
endif.
if wa_final-t_max_min_hr eq 0 .
wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
ELSE.
wa_final-l_p2 = 0.
endif.
IF p_mode = 'A'.
wa_final-equnr = wa_data-equnr.
wa_final-eqktx = wa_data-eqktx.
wa_final-eqfnr = wa_data-eqfnr.
wa_final-t_max_min_km = wa_final-min_km - wa_final-max_km .
wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ).
wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
APPEND wa_final TO i_final .
ELSE.
MODIFY i_final FROM wa_final
TRANSPORTING
eqfnr
max_date_km
min_date_km
max_date_lit
min_date_lit
max_date_hr
min_date_hr
max_km
min_km
max_hr
min_hr
t_max_min_km
t_max_min_hr
fuel_con2
km_l
l_p2
where equnr = wa_data-equnr.
ENDIF.
ENDFORM. " PREPARE_FINAL_REC
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EQUNR'.
fieldcatalog-seltext_m = 'Equip no'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EQKTX'.
fieldcatalog-seltext_m = 'Description'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 1.
fieldcatalog-outputlen = 40.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EQFNR'.
fieldcatalog-seltext_m = 'Sortfield'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MIN_DATE_KM'.
fieldcatalog-seltext_m = 'Min Date'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 3.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAX_DATE_KM'.
fieldcatalog-seltext_m = 'Max Date'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MIN_KM' .
fieldcatalog-seltext_m = 'Min KM'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAX_KM' .
fieldcatalog-seltext_m = 'Max KM'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'T_MAX_MIN_KM' .
fieldcatalog-tabname = 'i_final'.
fieldcatalog-seltext_m = 'Total KM'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MIN_HR' .
fieldcatalog-seltext_m = 'Min Hr'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 8.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MAX_HR' .
fieldcatalog-seltext_m = 'Max Hr'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 9.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'T_MAX_MIN_HR' .
fieldcatalog-seltext_m = 'Total HR'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 10.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'FUEL_CON2' .
fieldcatalog-seltext_m = 'Fuel'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 11.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'KM_L' .
fieldcatalog-seltext_m = 'Km/L'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 12.
fieldcatalog-outputlen = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'L_P2' .
fieldcatalog-seltext_m = 'Lit/HR'.
fieldcatalog-tabname = 'i_final'.
fieldcatalog-col_pos = 13.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
tables
t_outtab = i_final
exceptions
program_error = 1
others = 2.
if sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT

Need to remove space for a field when displayed in ALV Report

Hi,
I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
Is there any option in ALV field catalogue

use statement condense.
condense zmatnr.
also giv output lenth of alv column as 10.

Field Length issue in ALV Report

Hi,
I am using FM REUSE_ALV_GRID_DISPLAY to display few fields. Among them I have a field with length 200 characters text.
During ALV report display I am able to see only 128 characters, But when I download it and see the field, the it is showing complete text.
Can anybody help me out?
Thanks,
Ramakrishna

Check out the last answer of this post.
Re: ALV Grid Display - 255 characters
<i>I found a SAP document called "Using ALV for list display.pdf" that says the following:
"Size of data fields: While the list-based ALVList can display only tables of up to 90 columns, the control-based ALVGrid and ALVFullscreen have the limitation of 128 characters per data cell."</i>
Please make sure to award point for helpful answers and mark the post as solved. Thanks.
Regards,
Rich HEilman

Dynamic display of fields of table in ALV report.

To display the records of a table in ALV report dynamically such that first 10 fields of the table should only be displayed excluding 'mandt' field .
That is field no 2nd to 11th should be displayed.

parameters: p_vari type slis_vari.
at selection-screen on value-request for p_vari.
perform alv_variant_f4 changing p_vari.
form alv_variant_f4 changing l_vari type slis_vari.
On F4 for layout selection - Get laouts created to this report.
data: l_variant type disvariant.
l_variant-report   = sy-repid.
l_variant-username = sy-uname.
call function 'REUSE_ALV_VARIANT_F4'
    exporting
      is_variant = l_variant
      i_save     = 'A'
    importing
      es_variant = l_variant
    exceptions
      others     = 1.
if sy-subrc = 0.
    l_vari = l_variant-variant.
endif.
Create a structure
data: wa_layout type disvariant.
fill up the layout with selected fields.
wa_layout-report = sy-repid.
wa_layout-username = sy-uname " Choose this if you want user specific
wa_layout-variant = p_vari.
Assign the same to the REUSE_ALV_GRID_DISPLAY
it is a import paramter IS_VARIANT = wa_layout.
All you have to do is first execute the report and save layouts what exactly you want
and then next time you run the report you will get a chance to select the layout of your own.
or
You can get rid of MANDT field from fieldcatalog and internal table by creating a new
structure. I mean, if you know you always want to display the field from 2 to 11 then simply
delete the field from fieldcatalog.
You can assign to different field catalog using Field symbols and change your internal
table as well since you have created a dynamic internal table.
Let me know if you need more.

Logic For Subtracting A Given Output In ALV Report

Hi,
I am working on a report in which i am using ALV Concept and there a problem arise i.e. in ALV Report output which always subtotals having values in addition only and i want to know is there any way through which subtraction can also be performed within the output of a ALV Report.
Please provide some guidelines for it.
Regards,
Rickky NV

Hi,
Thanks to both of you for your value able response. Actually, i am working on customer aging analysis report in which there are 2 columns i.e. debit and credit in which these both values are stored in 2 separate lines and i have to display the difference of them in the 3rd column and facing the problem.
Is it possible to display the required data of it in 3rd column of it?
Regards,
Ricky

Editable field gives wrong value in report.

Hi,
I have report with some editable fields. I am using apex_item for one editable select list. I gave functionality to update row by providing go button. when user clicks on go button, I sends page by using javascript dosubmit which updates values in table through update process. everything works fine but sometimes i am not able to read particular value in row. for example...
Rownum---------select_list--------- button---------- comment(editable)-not used apex_item
1------------------------ 'abc'---------------- GO----------------------------- new
2------------------------- null---------------- GO--------------------------- closed
3 ------------------------'xyz'---------------- GO--------------------------- reopen
I used apex_item for select list but status is made editable by selecting "text area" from tabular form element of column.
when I press GO button on row third by selecting xyz it takes null value of 2nd row. same if I select something in 2nd row. i.e. instead of null if I selects 'mno' in 2nd row it takes select list value as 'mno' for third row. I observed this by writing javascript code which alerts me value of variable f01,f02.....
Please if anybody can help me. I want to know why this happens?

You might have better luck asking in the Oracle Application Express (APEX).

Sum hidden fields in web dynpro ALV reports

Hi everyone
Could anyone tell if it is possible to sum a field that is hidden in an ALV Report in Web Dynpro?
I need to hide a row so as not to be seen by the user (like the filter option) but with the need that the value that is stated in that hidden row must still impact in the Column Total.
Thanks!
Fede

Hi everyone
Could anyone tell if it is possible to sum a field that is hidden in an ALV Report in Web Dynpro?
I need to hide a row so as not to be seen by the user (like the filter option) but with the need that the value that is stated in that hidden row must still impact in the Column Total.
Thanks!
Fede

ALV Report Formatting

Hi all,
I am working on a report, where I have created an ALV report, now the problem is when I run this report and get the output screen it shows me two buttons 1. change layout and 2. select layout but the third button is missing which is for "save layout". So can you please tell what I am missing? or what is required to be done !!!
Thanks,
Rajeev

if you mention the is_layout and i_save option along with other parameters then it automatically enable that option too.
*"     REFERENCE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*"     REFERENCE(I_SAVE) DEFAULT SPACE
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   I_GRID_TITLE                      = I_GRID_TITLE
   I_GRID_SETTINGS                   = I_GRID_SETTINGS
   IS_LAYOUT                         = IS_LAYOUT
   IT_FIELDCAT                       = IT_FIELDCAT
   I_SAVE                            =   'X'            " you can specify A , U also
TABLES
    t_outtab                          = t_outtab
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1

Editing fields on output of alv report format

Similar Messages

Maybe you are looking for