Effects have annoying lines once saved

Hi everyone
I am new to this forum and new to Adobe Premier Elements
I have version 4.0
Whenever I try and use Lightning or Particle effects I have a serious problem when I save the video
The effects have horizontal lines running through them (please note these lines are MORE apparent in the actual vid I made, in this screen capture they don't look that bad)
can anyone tell me what settings I can use to avoid this?
I am saving in 1080i (windows media)
Also in the preview window of my project there are NO lines.
I am looking to buy AE soon and if I this problem is hardware related (can't see how as Vegas works fine running at full capacity) I need to know
any help would be greatley appreaciated
Thanks
Raz

Thanks for the speedy response
My project presets are
General -
Frame Size : 1440x1080
Pixel Aspect Ratio: HD anamorphic (1080) [unchangeable]
Display Format: 25fps Timecode
Rendering -
Compressor: Microsoft Video 1 (Temporal Quality Ratio 0.75) [Could this be the issue?]
Colour Depth: Thousands of Colours
The file going in is -
1440x1080
2847kbps
29fps
The finished saved file is
HD 1080i 30
1440x1080
29.97 fps
Video Codec: Windows Media V9
Encoding Passes : one
Bitrate Mode: Constant
Pixel Aspect ratio 4:3
Keyframe Interval : 4
Buffer Size: default
Average video Bitrate: 8000
Peak video Bitrate: 10000
Peak video buffer size : 5
I didn't adjust or change any of these settings
Hope this helps
Raz

Similar Messages

How to avoid lines left behind after effects have been flattened in CS6?

We work in a packaging environment using MAC OS 10.6.8 using Illustrator CS6.
In order to ouput Illustrator files correctly through a RIP, we expand all effects (shadow, glows, etc) before converting them to a Hi Resolution PDF to impose for output.
What we have started to see is lines starting to show up on the PDFs (and the Printing Plates too) where the bounding box of the effect used to be. We have seen lines show up in earler versions of Illustrator but not to the number or thickness they seem to be in CS6.
Is there any way to avoid these lines from showing up (and being printed)? What methods do other people use to get around this issue?
Any suggestions would be most helpful.
Many Thanks
Andrew

So we have been working through the above issue....
Problem:
1) This problem started because Illustrator Effects wont print through our RIP unless they are flattened first.
2) The issue is further complicated by the fact that most of the effects involve spot colours (either directly or under the effect)
3) The RIP will only read PDFs saved in PDF 1.3 (Acrobat 4). Yes, we have checked with the supplier and it IS up to date!
4) When sending PDFs through our RIP from Illustrator CS6 we get white bounding boxes around spot color effects and keylines around CMYK objects.
5) These line and boxes are visible on the PDF and print on the plate.
Solution:
1) Work the file in the usual manner then split the file into 2 (or more) layers. The top layer for elements/objects/type that have NO effect on it that you wish to remain in vector format (or that can be editable at a later date). The bottom layer for ALL other items with effects applied and any items that will be modified by above effects (items below shadows or glows etc).
2) Save a PDF copy of the Bottom layer as PDF version 1.7 to maximise compatibility. Keep the other settings as you would normally use for Hi Res or custom output.
3) Split you PDF in the CMYK and seperate Spot colours. (We used Prinect PDF Toolbox to remove unwanted colours).
4) You will also need to convert all spot collours to a sigle process colour (ie we use Black) this can also be done through Prinect PDF Toolbox. If this is not done, the colour will split into CMYK at the next stage.
5) Open all of you now modified PDF files in Photoshop (the CMYK with the Spot colours removed and the Spots with all the CMYK removed)
6) Drag your spot files into the CMYK version (from the Layers Pallete). You will then need to duplicate the Black Channels and save them as Spot Channels (let me know if you need help to do this) then remove the original black layers.
7) Save this new file as a Photoshop PSD file.
8) Place this new PSD in the you Illustrator file in the same position as the layer that you originally saved as a PDF. You can now hide the original export layer.
9) Output the File as a PDF 1.3 (Acrobat 4) in your usual Hi Res method. (We do this through InDesign so that we can include our custom Slug information).
10) The RIP will now not have to process each of the Effects, just 1 single Photoshop PSD in the background of each file.
I know this is more of a work-around than a solution the the problem... but it's the only thing we know of that guarentees a succsessful result every time.
If anybody reading this knows of any other solutions, please let us know.
Many thanks
Andrew

Photo Booth Effects have vertical green lines

Can anybody explain why some of my photo booth effects have vertical green lines running through them and how it can be corrected/removed?!
Looking at the files they all begin with "dts"
/Users/audio3/Desktop/Photo 7.jpg

This question is shown as answered, did you find a solution??? I have the same problem, but not with the original effects. Just with the ones that I uploaded from apples website.

I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

Which operating system are you using?
Some filters like Filter>Sketch>Stamp need to have two different colors for the Foreground and Background set in the toolbox.
Press the D key to set the default toolbox color swatches to Black and White and then try the Stamp filter.
If your using mac os x 10.9 or 10.10, then some of the filters under Filter>Sketch will crash pse 11
They are Filter>Sketch>Comic, Graphic Novel and Pen and Ink
Otherwise resetting the pse11 editor preferences might resolve the crashing.
Go to Photoshop Elements Editor(Edit)>General, click on Reset Preferences on Next Launch and then restart the pse 11 editor

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

I was wondering how much it would cost to get out of this contract? I have 4 lines and 3 contracts end on 10-2015 and 1 in dec of 2014?? My bill is 300 or more per month which is a bit pricy now considering the other offers with other companies available

How much are early termination fees? I have 4 lines, 3 of which expire 10-2015 and 1 in Dec 2014. Is there any creative ways to get out????

I'm sorry to learn that you have moved away from our wireless family brensan! Once your account is cancelled you cannot access your My Verizon account using your wireless number, as the number is no longer associated to our network. However, you should be able to access using your user ID instead of your wireless number, and the same password that you always used to access your account online. Please let us know if you need further assistance getting the information you need, and if you miss our superior network going forward please visit this link http://bit.ly/qDhvBY to switch back at your convenience.
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

We have 5 lines but only using 4; how do I terminate the unused line? Is there a fee? Can I transfer end of contract date from another line to the line we don't use?

We each have a phone and our three children are on our account as well. One of my boys just started his own account and is no longer using his phone or the line that is on our account. The contract end date is another year away but my other son's contract end date is next month. Is it possible to transfer the contract end date like we can transfer upgrade dates? I hate to pay $50/month for a line that's not being used.

No, you cannot transfer contract end dates. If you cancel the unused line, you will have to pay an ETF.
Your son still on your account could start using your other son's line and number. Then you could cancel out HIS old line once the contract runs out, but then he could not get a new phone for another year. Can his phone last another year?

Hi I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from t

Hi
I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from these websites but when I open it next time, it requires username & password.
Does anybody know the problem & solution, plz help. I also found disk erros and reaoired permissiomn and the restarted and did disk utlty again and repaired the same disk errors and then did a restart and still does not remember passwords or ask me. Did all this still no luck it saved apple login on here and saved gmail account but others one it used to save does no longer.here is what i did below and still no luck.
Instructions
Set Your Passwords Preferences
1
Open up your Safari Web browser and choose 'Preferences' from the Safari pull down menu
2
Click on the heading 'AutoFill.'
Click on the box next to 'User Names and Passwords.'
4
Close the 'Preferences' window.
Save Your Passwords
5
Go to a Web page that requires a password and enter in your chosen password. Safari will then ask if you would like to save this password.
6
Click on the button 'Yes' in order to save the password.
7
Complete steps 1 and 2 for any other passwords that you want Safari to remember.
Manage Your Passwords
8
Go to the 'AutoFill' section in the Safari Preferences window.
9
Click on the 'Edit' button to the right of where it says 'User Names and Passwords.' This will bring up a window displaying all of the passwords and usernames that you have authorized Safari to save.
10
Click on a password listing and push the 'Remove' button in order to delete the password from Safari's memory.
11
Choose 'Remove All' in order to delete all of the saved passwords.
12

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

PE 9; can clip from scene line be saved to use in another project?

Hi-
First time post. Can a clip in the scene line be saved as a separate clip in organizer to be used in another project?
I have a long project that is comprised of many clips, and I would like to reuse some of them in other projects, or other versions of this project.
The "export" button seems to be grayed out in the files section.
Rename seems to be just to rename the whole project.
I guess I could just rename/save several times, then cut out all of the other clips, and just save the desired clip, but that seem like too much work to be the way Adobe really wants it to be able to be done. Is there a more efficient way?
Thank you.

How can I use footage from one project in another? First set the Work Area Bar to cover the part you want to reuse, and then Share it .
Export is only used to save titles files. All other options are within the share tab.
Cheers,
Neale Insanity is hereditary, you get it from your children

Pictures sent from Samsung WP7 to iOS Devices Cannot Be Viewed Once Saved the the iOS Photo Library.

Pictures sent from Samsung WP7 to iOS Devices Cannot Be Viewed Once Saved the the iOS Photo Library. I don't have issues with saving pictures from any other user types. Please help!
Steps to reproduce issue:
1) Share pictures from WP7 either via email or Messaging with iPhone 4
2) View photo on iOS device in email app or messaging (text message)
3) Save Photo to Photo Library in iOS
4) Go to Photos app in iOS
5) This results in a dialog saying "Rebuilding Photo Library"
6) Once this is done, the photo sent from WP7 appears a grey block icon that says ".JPG: on it

iPhoto > iPhoto Preferences > PhotoStream, turn off automatic uploads.

5DIII images in Aperture have a line at the top

I got my new Canon 5DIII on the weekend and before importing the first lot of images, I updated Aperture as I'd seen the software update announcing support for 5DIII raws.
All images when viewed through Aperture have a thin (possibly 1-pixel wide) line at the top of a landscape image, or to the left or right on a portrait image. The line is not a single colour, but seems to be made up of a distortion of colours from the image itself. I can see that the raw images on the disk when viewed through the Finder do not have the line (PHEW!), and the line is not there when I export an image from Aperture. So, given that it only appears inside Aperture, it's not a huge problem, and I'm certainly happy that it's not the camera, but it's still annoying. Another point is that the line is not there during that 3-second "Processing" period while it's first looking at a new RAW; it only appears after it's successfully processed it.
Anyone else experienced this, or can someone try it out and look for it? I'm at work at the moment so can't upload a screenshot, but happy to do so later if required.
cheers,
Ian

Top of page - goto "View" then "Toolbars" then tick "Navigation Toolbar" - shud do it

Any one have a Line 6 TonePort UX2?

Any one have a Line 6 TonePort UX2? Maybe not as it's pretty new. It looks like a great thing for we guitarists. I'm thinking of acquiring it instead of the Presonus Firebox (on loan right now from a friend) because of all the Line 6 guitar amp models included for less than the Presonus. It would be cool to have those as well as GTR Amp Pro in Logic. The Line 6 also has vocal preamp modeling.
See it here: http://line6.com/toneport/overview.html
Dual 1.8 GHz PowerPC G5 Mac OS X (10.4.3) 1 GB RAM, 1972 Gibson LP, Martin HD-35, Alembic Solidbody Electric 12 string

I have a UX2. I've tried a number of soundcards (mbox, maudio firewire 410 and firebox) and found this to be comparable with the best of these on sound quality (great preamps and A/D converters) , and superior to all three on effects, price and useability. It just has that X factor - 'It makes you want to record". Mine has worked seamlessly with Garageband, Ableton Live and Final Cut Pro where the others have all had various conflicts with my software. The Vocal amp models have turned my SE2200A mic into a much classier sounding beast and the Guitar and bass amps are great too. For the money, you can't get better.

Can't open .msg files more then once, saved or as an attachment to an email

we use :
microsoft xp & office/outlook 2003
can't open .msg files more then once, saved or as an attachment to an email
If we save an email as a outlook.msg file , we can only open it once, close it,
when trying to open it again it gives an error that it is not possible due to a scurity issue or it is already open.
After closing outlook and starting it again, we can open it once again.
Same when clicking an .msg that is attached to an email, but here we can switch to another email, go back to the one and open it again.
We have installed all updates for both xp and office 2003 also internet explorer 8.0 to test if that would work, normally we have ie7.0.

Hi,
1． What is the detail error information, please try to reproduce the issue and then post the detail error information here.
2． Did you save the msg file locally or on a network drive?
3． Please try to check security on the msg file and also check the drive NTFS permission.
4． Copy over the email messages from the affected user machine to a different machine and check if the issue persist.
5． Test if the issue persist after saving a new email on Mailbox to local drives.
6． Copy over the affected email messages from local drive to a PST file and check if these emails can be opened fine.
1)    Create a new PST file .
2)    Added to user’s Outlook profiles.
3)    Launch Outlook .
4)    Highlight a folder under this PST.
5)    Drag and drop or copy/paste the emails from local drive to Folder highlighted under the PST files.
Besides, please try to remove all the add-ins like Entrust and then test the issue again.
1.     Remove add-ins
1)    Uncheck all Third-Party Add-ins selected in Outlook , found under Tool\Options\Other\Add-ins managers.
2)    Export the registry hive below for backup.
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook \Addins
  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\Outlook \Addins
3)    Delete the registry entries under the above path for all Third-Party Add-ins.
4)    Close , Open Outlook and attempt to open email message on local drives.
2.     Temporarily stop all third-party application running following the steps
below.
1)    Run MSCONFIG
2)    Go to Services Tab\Select Hide all Microsoft Services check box.
3)    Click Disable All.
4)    Restart the Machine Test if the issue persist.
5)    To revert back the above setting Run MSCONFIG, Go to General Tab , Select Normal
Startup and restarted the machine.
Regards,
Xiu
1 Translated from dutch as good as i know :
"Can't open : c:\test.msg, it might not exist, do you have the required permission to open the file or is it open in another application. Click
with the right mousebutton on the map click properties to view/check the rights for that map."
2 tried both, the network and locally, i have the rights to save it in the map and open it once, so thats not the problem, iseems that outlook locks the file after it is openen once.
3 security and ntfs permissions are ok, see 2
4 tried it from different pc's networks maps etc.
5 done.
6 in a pst file the msg can be openen ore than once, but thats not the problem, tried and this works, but i need to save an email as an .msg file.
7 addins removed and doen all of that part, didn't help.
We also have tried:
-Installing all updates and ie8
-going back to xp sp2 (fresh install of xp)
Only thing that did work was an msg file attached to an email, we couldn't open that more then once,
but after checking "Use exchange modus with cache" at the account properties we could open that more than once.
Now we need to be able to open the email's saved as .msg more then 1 time.

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list. It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
Let's see what we can find. I may just take it back to the Apple Store.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Effects have annoying lines once saved

Similar Messages

Maybe you are looking for