Effects of changing IP number on solaris server with oracle

I need to change my servers IP adres.
What can i espect to do when I change it ?
We are running Solaris 2.6
A Oracle 7.3.4 Database
A Oracle 8.1.6 Database
Greet Jeroen Tip

It all depends on how you have set up your connectivity to the databases. If you are using IP addresses in your tnsnames.ora or sqlnet.ora etc, then you will have to change all those. WE use DNS entries for everything, so the only affect on us when IPs change is at the DNS level and is transparent to us. (the DBAs that is).

Similar Messages

On Sun fire v490 - Solaris 10 with Oracle 8.1.7.4 & Sybase 12.0

Hi,
We are going to upgrade our server with this configuration -
Sun Fire V490     2 x 1.05 GHz UltraSPARC IV CPU
8096MB RAM     2 x73GB local disk
2x FC 2GB Sun/QLogic HBAs
DAT72
On one machine we will have Sun Solaris v10 with
Oracle DB v8.1.7.4 & Second one will be Sun Solaris v10 with Sybase DB v12.0.0.6.
Now our question is - Sun fire have Hyper-thread CPUs �� will the O/S and databases (Oracle and Sybase) view the proposed system as a true 4 CPU platform? Will parameters used to tune the database such as Sybase max online engines still operate in the same manner as before?
Our old machine configuration was - Sun E450     4x400MHz CPU     1024MB RAM     2 x18; 8x36GB disks

Questions on Oracle and Sybase should be directed to a database forum, this forum is for Sun hardware support.
Here is a link to a DB forum I look at from time to time:
http://www.dbforums.com/index.php
The topic of tuning Oracle or Solaris is way beyond the scope of this forum, I have attempted to go into it before but didn't get any feedback and I would only like to spend lots of time on it if I was being paid!!! On the memory side, keep in mind that Oracle 9i 64-bit can address a maximum of 2 ^ 64 ( 16777216 TB ) memory, prior to that the DBA had to define memory parameters in init.ora. To be honest the last time I worked with a Oracle 8 database I shut a HP K class server down permanently that had been migrated to Oracle 9i on Solaris by an Oracle consultant and I can't remember all the tuning trick etc.

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Upgrade to Solaris 8 with Oracle 8.0.6

Hi forum,
on a Sparc-Server with Oracle 8.0.6 we want to upgrade from Solaris 7 to Solaris 8. Do we need to upgrade Oracle first or is Oracle 8.0.6 supportet on Solaris 8 ?
Thanks
Hans-Peter

> Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
I would do it like (if you need/want to stay on the same hardware):
- upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
- upgrade Solaris 8 to Solaris 10
- upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
- use kernel 46D_EX2
- upgrade the 4.6c to ERP 6.0
Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
Markus

Is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license

is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
Sql fire is my machine
Oracle is another machine
When i connect sqlfire with oracle using DBsynchronizer It shows the error message as Wan is not supported for default license
When i connect Sqlfie(my system) with oracle( another system) using JDBC Rowloader .nothing is happening after some time it shows the error like"time out for pool connection to archive database.When i increase the time out also nothing is happening.
what is the reason for above two errors(I stated in the pragraph.)
is it beacuse of wan netwrok not supported by default evaluation license?
could you please explain?

I don't think this has anything to do with a VMware product.

Ibm Visual age 3.5 Persistence Name Server with Oracle 8.1.7

Hello every one!
Iam facing a problem with visualage 3.5 persistence name server with Oracle DB. I configured PNS with oracle driver (thin driver).
I could start the pns server, Servlet Engine.
I loaded my application with PNS and oracle thin driver is not executing any queries.
Without PNS, directly interacting with Oracle DB thru JDBC also works fine.
Has anyone tried to use PNS with Oracle successfully?
Thanks
Keerthi

hello there,
check these things in u r mac before launching PNS..
1: Is OracleDriver is there in the path i mean in the PNS path..
2: Right click and check the properties...
3: and also check the env properties and launch the PNS if PNS is launched then u can work on it...

Forms 6i server with oracle Apache on 9i

Hi
has anyone configured forms 6i server with oracle Apache on oracle 9i
any suggestions
kedar

Hi Paul
I have configure as per notes on metalink 114226.1 in httpd.conf file
I have stopped IIS and restarted HTTP server
i get the default page when i enter http://<server>/dev60html/runform.htm
but when i enter port of forms server and web host as the machine name it takes along time
can u let me know if i am missing on any thing specific ?? in the setup
thanks
kedarr

To find SCN number in standby database with Oracle 9i.

Hi all,
1.how to find SCN number in standby database with Oracle 9i.
note:
1.it is in mount stage.
2.oracle 9i.
regards,
Jayaprakash.

Hello;
I have no Data Guard 9 to review. However I might try this :
select * from "_DBA_APPLY_PROGRESS";
OR
select time_mp,time_dp, scn_wrp, scn_bas, scn from smon_scn_time;Also found this: ( almost certainly NOT a physical Standby )
SELECT APPLIED_SCN, NEWEST_SCN FROM DBA_LOGSTDBY_PROGRESS;Best Regards
mseberg
Not worth another post but I think v$database on Oracle 9 has these columns only :
v$database on Oracle 9
DBID
NAME
CREATED
RESETLOGS_CHANGE#
RESETLOGS_TIME
PRIOR_RESETLOGS_CHANGE#
PRIOR_RESETLOGS_TIME
LOG_MODE
CHECKPOINT_CHANGE#
ARCHIVE_CHANGE#
CONTROLFILE_TYPE
CONTROLFILE_CREATED
CONTROLFILE_SEQUENCE#
CONTROLFILE_CHANGE#
CONTROLFILE_TIME
OPEN_RESETLOGS
VERSION_TIME
OPEN_MODE
PROTECTION_MODE
PROTECTION_LEVEL
REMOTE_ARCHIVE
ACTIVATION#
DATABASE_ROLE
ARCHIVELOG_CHANGE#
SWITCHOVER_STATUS
DATAGUARD_BROKER
GUARD_STATUS
SUPPLEMENTAL_LOG_DATA_MIN
SUPPLEMENTAL_LOG_DATA_PK
SUPPLEMENTAL_LOG_DATA_UI
FORCE_LOGGING              ."_DBA_REGISTERED_ARCHIVED_LOG" has a "NEXT_SCN"
Edited by: mseberg on Dec 19, 2011 10:03 AM
Edited by: mseberg on Dec 19, 2011 10:29 AM
Much later
Also found this :
select dbms_flashback.get_system_change_number scn from dual;
Edited by: mseberg on Dec 19, 2011 11:06 AM

Sun Solaris Server Running Oracle 9i

If I am running Oracle 9i, what version of Oracle can I install on my MS Windows desktop to access it. Should I purchase and install Oracle 9i Client? Is there a free download available? My Oracle 9i includes Application Server and the regular CD packs.
We also have a Windows NT server running Oracle 8i. Same question to access it, for a PC must I install Oracle 8i Client? Is there Oracle client software I can get that will interface with the 9i and 8i servers?

I'm also wondering about 10g's ASM. Is that
something recommended. We have alot of in-house
hardware expertise, and the idea of using Automated
Storage Management seems too simplistic at first
glance.It sounds like you have SAN experts.
ASM simply compensates for
1) the need for a clustered file system in the RAC case; and
2) SAs and Storage Admins 'experts' who recommend stuff like RAID 5 as being best for a database (as compared to 1+0) and then argue that the SAN is great because of the huge cache ... not realizing that the cache is compensating for the RAID 5 deficiencies.
You see, ASM simply provides you with a file system in the case when no file system is available (raw disk). It can complement, or replace, the SAN environment.
I strongly encourage you to look at the ASM manual supplied with 11g in depth. The conclusion is pretty common, and pretty commonly wrong. However, as with everything else in Oacle, the only true answer is 'it depends'. (Docs are available at http://docs.oracle.com or http://tahiti.oracle.com)

Shared memory in solaris 10 with oracle

Hi, I am a newbie to solaris and i have some questions on shared memory, Oracle in Solaris
My Questions might seem different, however please do read and try to answer. Thanks in advance.
1) if a solaris server has say 40gb of Ram, what would be the maximum size of a shared memory segment in this machine?
I know that if the server has 40GB. then max shared memory size is 10GB i.e. one fourth of ram, however not sure
2) What is the maximum size of a shared memory segment in solaris that a root user can define.
+ i know that its some where near 14 GB not very sure +
3) Assume i have created a user X and i allocated say 10GB limit for this user for shared memory.
I login to solaris using X and now, can i increase the size of the shared memory that this user can use?
I have a situation, where the root user, created a user named DBA and the root user allocated some 15gb for this DBA user as the max SHM limit.
Now the DBA user has set the max limit for shared memory as 1TB, which is causing hell of problems in the system.
* I am Not very sure on the concept. I am new to this product and facing this problem. please advice.*
+ Thanks +
Krishnakanth (Simply KK)

Not sure why your "oracle" user (owner who will be creating the instance) has been assigned the project user.root. I would say create a seperate project may be "dba" and give access to this project to the owner of the user who will be creating the oracle instance.
and then try to issue the command:
prctl -n project.max-shm-memory -v 8gb -r -i project dba
and check to see if you are still facing a problem?
Edited by: somjitdba on Apr 2, 2009 9:54 PM

Service pack 4 on windows 2000 server with oracle 8.1.7

Hi,
does anyone know if there is any problem installing services pack 4 on windows 2000 server having oracle 8.1.7.?
Thanks.

I have one machine with that configuration and I had not any problem.
Joel P�rez

Installing OMS 10.2.0.5 on server with Oracle 11.1.0.7

IBM w/AIX 6.1
I am wondering if there would be any expected issues to download and install the latest version of OMS (Oracle Management Server for Grid Control), 10.2.0.5 onto a server that already has Oracle 11.1.0.7 running on it.
I intend to use the 11.1.0.7 for the actual OMS repository database, (as well as my RMAN catalog database).
While I am fairly certain that there are no compatibility issues with running the 11.1.0.7 for the OMS repository database (and RMAN catalog databases), but what I'm concerned with is the order of installing.
As noted, I have already installed the 11.1.0.6 and upgraded to 11.1.0.7.
Can I simply download and install the OMS 10.2.0.5? I'm assuming it would just put everything into a separate Oracle Home such as /oracle/product/oms (or something like that), while the 11.1.0.7 is located in /oracle/product/11.1.

Yes, I know that, but my question still remains regarding the installation of OMS on the same server with existing Oracle software (especially of a higher version)?
Does anyone have any experience with installing latest version of OEM (10.2.0.5) on a server already having a later version of Oracle RDBMS (11.1.0.x)?
Thanks.

Configuring Apache HTTP Server with Oracle Weblogic Server plugin

Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks

"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
     ConnectTimeoutSecs 10
     ConnectRetrySecs 2
     DebugConfigInfo ON
     WLSocketTimeoutSecs 2
     WLIOTimeoutSecs 300
     Idempotent ON
     FileCaching ON
     KeepAliveSecs 20
     KeepAliveEnabled ON
     DynamicServerList ON
     WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
     SetHandler weblogic-handler
     WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

Integrating MS BizTalk Server with Oracle Financial

Hi..
I'm looking for solution to enable Microsoft BizTalk Server 2000 integrates with Oracle Fin apps. I'm not familiar with Oracle Finance, please advise the most common scenario applied. I knew Compaq IOrchestration can do this integration, but if possible, I'd like to prevent the use of other 3rd parties product.
Thanks
Krisna
null

Hi..>I'm looking for solution to enable Microsoft BizTalk Server 2000 integrates with Oracle Fin apps. I'm not familiar
with Oracle Finance, please advise the most common scenario
applied. I knew Compaq IOrchestration can do this integration,
but if possible, I'd like to prevent the use of other 3rd
parties product.>Thanks>Krisna>null

SQL Server with Oracle

Hello All,
I am trying to invoke the SQL Server database from Oracle for which I have done the following:
1) Created DSN for SQL Server database
2) Created the init<DSN Name>.ora file under <oracle home>\database as follows:
HS_FDS_CONNECT_INFO = sharepoint
HS_FDS_TRACE_LEVEL = OFF
3) Created a listener entry as follows:
sharepoint =
+(ADDRESS_LIST=+
+(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))+
+(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))+
SID_LIST_sharepoint=
+(SID_LIST=+
+(SID_DESC=+
+(SID_NAME=sharepoint)+
+(ORACLE_HOME = <path>)+
+(PROGRAM=hsodbc)+
+)+
+)+
4) Added a new TNS entry in tnsnames.ora file as follows:
sharepoint =
+(DESCRIPTION=+
+(ADDRESS=+
+(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))+
+(CONNECT_DATA=(SID=sharepoint)))(HS=OK)+
I have created a DBLink in Oracle database using the new tns name.
When I try to access a table using DBLink in Sql plus / Toad I am getting the following error:
ORA-02068: Following severe error from sharepoint
ORA-03135: connection lost contact.
I have confirmed whether the listener is up and also I got OK result using tnsping.
My windows firewall is off (as of now) and also I have no entry to timeout in SQLNET.ORA file.
Am I missing something here.
Please help me out.
Regards,
Anoop

I can only comment on the SQLSever gateways I had to install recently, maybe some of these notes will jog your memory.
Assuming you have installed the gateway on the SQLServer server with just the defaults.
I notice your pfile is called init{DSN}.ora. I named mine initdg4msql{SQLSvrDBname}.ora
The FDS info line was: HS_FDS_CONNECT_INFO={servername}//{SQLSvrDBName}
( This assumes the default SQLServer TCP port is being used, else syntax is different. )
The gateway listener.ora config for mine was:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1800))
(ADDRESS = (PROTOCOL = TCP)(HOST = serverhostname )(PORT = 1800))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=dg4msql{SQLSvrDBName})
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=dg4msql)
Rgds

Effects of changing IP number on solaris server with oracle

Similar Messages

Maybe you are looking for