Employee / customer replication

Hi!
My ECC has customers that are also employees (so they were created in KNA1 with the same number as in the PA01 transaction - the HR master data record).
The employees were replicated into CRM using ALE (SAP standard procedure) and were saved in CRM with the same number as in R/3, and in the BP Role Employee.
It happens that some employees are customers too. So when I am replicating these customers now into CRM (using CUSTOMER_MAIN), the BDoc generates an error because he tries to create a customer record on CRM, in the same number as the already existent employee. The system response I would like to have his the following:
- verify if the BP is already an employee in CRM
- if so it should add a new BP role in the same BP master data record instead of trying to create a new partner in CRM.
Can you help me?
Thanks a lot!
Regards.

Hi,
Customers created in ECC are sold to party & they have sales area. While Employees created in PA30 - HR master doesnu2019t have any sales area.
Now you have created first customers & then with the same number of customers you have created employee.
The same number of customers & employees will not be downloaded into CRM.Number range should be different.
Employee will replicate from ECC to CRM by IDocs while customers will replicate from ECC to CRM by BDocs.
My suggestion to you is that identify in ECC those employees who are customers also. First create employees in ECC & download into CRM using IDocs. Then create customer with different number & download to CRM by using BDocs & adapter object CUSTOMER_MAIN.
In CRM create a relationship category like u201Chas the customeru201D & u201Chas the employeeu201D
Example. Employee=X & Customer = Y.
So relationship category will be Employee X has the customer Y & customer Y has the Employee as X.
Best Regards,
Rajendra Sonawane

Similar Messages

MDM 5.5 Material, Vendor, Employee & Customer Repositories

Hi,
MDM 5.5 comes with object repositories for Material, Vendor, Employee & Customer. Can anyone help me in finding a way to synchronize these with R/3 ?
I am able to see Corresponding IDoc names as data sources in Import Manager for these repositories. But, my question is, what are the steps required for synchronizing with R/3 so that I can import/export these data from/to R/3.
Thanks in Advance,
Rajani Kumar K

look at this doc:
MDME 5.5 - ConfigGuide - MD Consolidation & MD Harmonization
at Quick Link:/nw04installation
Kevin

Customer replication from R/3 to CRM as BP's in install at role

Hi experts,
Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. Can anyone explain me the steps clearly for creating the BP's in CRM correpsonding to the R/c customer. I don't want to replicate them as BP's in ECC.
Thanks
Santosh

>
Santosh Kolleti wrote:
> Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
> Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
> interruption and has therefore been terminated."
> Information on where terminated
> Termination occurred in the ABAP program "SAPLSMO0" - in
> "SMOF0_READ_SMOFOBJECT".
> The main program was "SMOF_DOWNLOAD ".
>
> In the source code you have the termination point in line 58
> of the (Include) program "LSMO0U06".
> Do I need to download anything else before doing the customer download from ECC to CRM.
>
> Can anyone help me fix this issue.
Hi,
You have done important steps.
You have to check all relevant functional modules are available in the table.
Then,you have to maintain/delete entries based on standard document.
Make sure all Queue is available with system users,right RFC and the queue is registered.
Make sure all the RFC connections are created and working properly.
You have to generate the objects.
Please check some of the above steps .
Regards,
SSN.

Customer replication from R/3 to CRM as BP

Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated."
Information on where terminated
Termination occurred in the ABAP program "SAPLSMO0" - in
"SMOF0_READ_SMOFOBJECT".
The main program was "SMOF_DOWNLOAD ".
In the source code you have the termination point in line 58
of the (Include) program "LSMO0U06".
Do I need to download anything else before doing the customer download from ECC to CRM.
Can anyone help me fix this issue.

>
Santosh Kolleti wrote:
> Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
> Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
> interruption and has therefore been terminated."
> Information on where terminated
> Termination occurred in the ABAP program "SAPLSMO0" - in
> "SMOF0_READ_SMOFOBJECT".
> The main program was "SMOF_DOWNLOAD ".
>
> In the source code you have the termination point in line 58
> of the (Include) program "LSMO0U06".
> Do I need to download anything else before doing the customer download from ECC to CRM.
>
> Can anyone help me fix this issue.
Hi,
You have done important steps.
You have to check all relevant functional modules are available in the table.
Then,you have to maintain/delete entries based on standard document.
Make sure all Queue is available with system users,right RFC and the queue is registered.
Make sure all the RFC connections are created and working properly.
You have to generate the objects.
Please check some of the above steps .
Regards,
SSN.

Business Partner with ID GUID is not an employee - HR Replication

Hi All,
We are on SRM 5.0 Server 5.5. Our SRM Org structure comes from R/3. We did an initial replication and everything worked. I am now manually trying to replicate selected positions and persons, and this is not working properly.
The position and person comes across however in PPOSA_BBP the central person is not automatically linked to the position. When I run HRALXSYNC on the CP, I get an error "Business Partner with ID <GUID> is not an employee". I have checked the BP and it is an employee; in transaction PP01 there is an Org. assignment (0001) to the position and org unit. I have checked the IDOCs and the relationship A008 seems to be coming across.
Does anyone have any suggestions as to what else I can check?
Thanks,
Paula.

Hi
Please go through this ->
The CP object is a technical object and represents the natural person. The CP is not transferred in the scenario "SRM standalone with ALE integration of an HR system". This means that the CP in the HR system and the CP in SRM systems are different objects. The number of the CPs in the SRM system in this case is not significant, but when the CP is created, the system tries to assign the number of the first personal number (contract) to the object.
See related SAP OSS Notes, which will definitely help ->
Note 920185 - SRM 5.0: No CP<->BP consistence check in BBP_BP_OM_INTEGRATE
Note 763403 Assign existing (SU01) users to (ext.) employees
Note 875015 No attributes found for service agent
Note 309909 - R/3 HR connection: Link user / position
Note 1046808 - Business partner validation
Note 934372 - SRM/CRM: HR integration for business partner - new features
Also see this ->
During the business partner replication from purchasing systems to SUS, the following error occurs in an XI interface: "An exception has occured. E:R11: 124 - Business partner with GUID &1 does not exist"
Note 726212 - SRM40-SUS: Business partner - correction for SP00
Related Notes
Note 922181 - SRM-SUS: Mail notification not send from 'BBP_SUS_BP_ADM'
Note 849217 - SUS-MM: Vendor replication leads to error
Do let me know.
Regards
- Atul

Customer replication (ECC - CRM), masses of Bdocs in error

Hello
I recently got my hands on CRM 5.0 where replication of customers from ECC to CRM should be set up.
There is no replication from CRM to anywhere else.
Based on my very limited CRM experience, it seems that delta download is running ok.
However there are hundreds of thousands Bdocs in error status and almost all of them seem to have same kind of errors: "Business partner with GUID xxx does not exit" and "Validation error occurred: Module CRM_BUPA_MAIN_VAL, Bcod type BUPA_MAIN".
It's of course possible to track down the cause of error and process the Bdocs one by one but what about the huge mass of hundreds of thousands of Bdocs? Any suggestions / ideas for this are highly appreciated.
Thanks!
Cheers
Mark

Dear Mark,
Please consider the information of note 757955 regarding transaction
CRMC_BUT_CALL_FU, you may have more entries for the events than described
in this note. This should be the reason for the errors in the BDoc.
This note explains the necessary customizing settings.
Another reason might be inconsistencies, so please check the reports in notes 703322,
609766
Regards, Gerhard

Customer replication from ECC - CRM

Hie Guys,
We have created a Customer in ECC. But it has replicated to CRM without sales area and Role.
Now i have tried downloading customer from r3ar2 and manually saved ..but no suncsess. B doc says thare is a validation error. CRM_BUPA_MAIN_VAL.
Its so stupid Error that if i create another customer in ECC with same (100%)information it replicates well with sales area. Can any one suggest me what could have gone wrong?
Thanksa nd regards,
Lata
Edited by: latha reddy on Feb 2, 2009 7:58 PM

solved! by deleting this employee completly and re downlaoding.

Customer replication from ECC to CRM

Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PM

Hi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai

Customer Replication problem from R/3 to CRM

The scenario is: We have upgraded R/3 to 4.7 and the logical system names have changed. CRM is still the same one ( 4.0 ).
Everything works fine. If I create an order it goes to R/3 and If I change an existing customer in CRM or R/3 it get replicated into the other system.
But if I create a new customer in R/3, it does not go to CRM.
All the tables are ok with the correct logical name and RFCs are working fine. Serial numbers are ok too and Delta download is active. I do not know what else I can check.
Did you have any similar situation? Any ideas of what I could check?
Any input is highly appreciated.
Thanks!

Hi Ankur & Michael
your points did help me to rectify the problem. here was another solution i did try and it worked out.My problem was in table CRMPAROLTP, in the field CONSUMER. It seems that 4.7 does not need to have this field filled. So I remove the entry and the information flows.
PS. I had awarded the points for both of you.
Thanks
SP

CRM BP to R/3 customer replication

I am trying to replicate the Business Partner in CRM to ECC as a Business Partner but ultimately as an SD customer. The CRM BP is flagged as a customer and has the role Sold-to Party. Sales area data is also assigned.
The BP is created in ECC with roles 000000, MKK - Contract account partner and FS0000 (?!). I am not sure how these are determined as I picked this up from a previous coleague. If I create the role FLCU01 manually in the BP in ECC then the customer is created. However I have to add data manually to the role.
How then can this role be determined automatically with the sales data when the BP is first replicated from CRM?
thanks
Tim

Firstly, the problem was resolved by activating an entry in table CRMC_BUT_CALL_FU.
Also I had to pay attention to some mandatory fields. So, allways a good idea to set your fields as optional in R3 for the account group that is mapped. Also note that the BP in CRM will map directly to the customer without first creating a Business Partner (not sure if this is always the case.
As for the reply above, if you just want to replicate the Business Partner only I you don't need to assign an account group. But I think you still need to assign a classification (I have done this automatically by implementing the Badi BADI_CRM_BP_UIU_DEFAULTS.
regards
Tim

Problem in customer replication from ECC to CRM

Hi experts,
When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
     Partner (): the following errors occurred
     Incorrect input data:
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
Why the Bdoc messae is not getting populated with correct value?
Also how I can see the data which is being sent from ECC. Is there any Idoc or something created at ECC outbound side where I can see the sent data?
Where in XD01 bdoc message is being created?
Please help.
Regards,
Vimal

Hi Vimal,
You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
Thanks,
Rohit

OSS Note and Management of Global Employee Customizing

Hello you all!
I've being having trouble with the customizing. When I perform the standard actions all the specific infotypes are skipped (i.e. 706, 710, 715).
We are working with the 4.7 release and SP 53. Do I need to modify something on table t77s0? Is there a note I need to apply?
Thanks a lot!!!
Diana

Hi Diana,
I might be able to answer better if you could tell me what action are you undertaking.
However, this may help you.
First, check if the Switch for Global Employment is ON in T77S0. Check X for CCURE-GLEMP Switch.
If the Switch is ON, goto Personnel Management-->Personnel Admin>Customizing Procedures>Actions>Set Up Personnel Actions-->Personnel Actions (Note the Infogroup Number for the action you are performing.)
Then, goto Personnel Management-->Personnel Admin>Customizing Procedures>Actions>Define Infogroups-->Infogroups (Infotypes entries MUST exist for 706, 710 and 715 in the list. DO NOT forget to check if User Group is also matching.
Please Reward if this helps.
Good Luck
Sita
Message was edited by:
Sitaram. V Mandalaparti

SD customer replication from CRM 2007 in ISU

Hi Experts,
I am creating a Business partner in CRM 2007 in role sold to party which is getting replicated in ISU system(Entry is saved in table BUT000) also the entry for SD customer gets saved in table KNA1; however system can not retrieve sales area for customer (No entry in table KNVV).
Sales area has already been maintained for Reference customer and required configuration is also in place.
Please let me know if anyone has faced similar kind of issue.
Regards,
Amit Gupta

Hello Amit,
As far as I know the reference customer is used when your business partner is created in ISU only.
If you create your business partner in CRM you will have to add your sales area manually, or via "mini-templates" for example... but the reference business partner won't be used (check the relevant cookbook: ref BP is used for data transfer from ISU --> CRM but not from CRM --> ISU).
Kind regards,
Nicolas.

Customer replication from CRM to R/3

Hi Experts,
we are using CRM 4.0 and we would like to replicate Business Partners from CRM to R/3.
On CRM side we have created some new fields with EEWB. I already know that in this case I have to write an FM in CRM and set in CRMC_BUT_CALL_FU as CRM Output Business Partner and I have to write and set one in R/3 in COM_BUPA_CALL_FU as R/3 Object Inbound processing Business Partner.
But I did not write and set any FM and the replication works but only once. We have migrated a lot of customers and they were replicated to R/3 and if I change them the changes will be replicated to R/3 except our additional new fields.
This additional fields are stored in the central-common part of the structure and during the debugging of the standard FM's, which are set in the above mentioned transactions, I can see the new values and the 'X' in the datax table.
These additional new fields are appended to BUT000 in CRM and these fields are standards in R/3.
Do you have any idea how to solve this replication error?
Thanks in advance!
Regards,
Tom

Hi Vikash,
thanks for the quick answer.
The values of the new fields are in the BDOC on CRM side.
Could you please send me a very short FM example which I have to write in R/3 to map one field.
Please see the content of my COM_BUPA_CALL_FU table and tell me which would be the best row for my new FM (Time, Object, Item)
R3IN Mapping Inbound Processing BUAG Business Agreement 100000 COM_BUAG_MWX_MAP_MAIN_CENTRAL
R3IN Mapping Inbound Processing BUPA Business Partner 10000 COM_BUPA_MWX_FILTER_MAIN
R3IN Mapping Inbound Processing BUPA Business Partner 100000 COM_BUPA_MWX_MAP_MAIN_CENTRAL
R3IN Mapping Inbound Processing BUPR BP Relationship 10000 COM_BUPA_MWX_FILTER_REL
R3IN Mapping Inbound Processing BUPR BP Relationship 100000 COM_BUPA_MWX_MAP_REL_CENTRAL
R3OBI R/3 Object Inbound Processing BUPA Business Partner 1000000 PI_BP_PROXY_BAPI_CUSTOMER
R3OBI R/3 Object Inbound Processing BUPA Business Partner 2000000 COM_BUPA_MAIN_BP_INBOUND
R3OBI R/3 Object Inbound Processing BUPR BP Relationship 1000000 PI_BP_PROXY_BAPI_CUSTOMER
R3OBI R/3 Object Inbound Processing BUPR BP Relationship 2000000 COM_BUPA_REL_BP_INBOUND
R3OBO R/3 Object Outbound Processing BUPA Business Partner 1000000 COM_BUPA_MWX_CREATE_MAIN
R3OBO R/3 Object Outbound Processing BUPA Business Partner 2000000 COM_BUPA_SEND_TO_SERVER
R3OBO R/3 Object Outbound Processing BUPR BP Relationship 1000000 COM_BUPA_MWX_CREATE_REL
R3OBO R/3 Object Outbound Processing BUPR BP Relationship 2000000 COM_BUPR_SEND_TO_SERVER
R3OUT Mapping Outbound Processing BUAG Business Agreement 100000 COM_BUAG_MWX_BPS_FILL_CENTRAL
R3OUT Mapping Outbound Processing BUPA Business Partner 100000 COM_BUPA_MWX_BPS_FILL_CENTRAL
R3OUT Mapping Outbound Processing BUPR BP Relationship 100000 COM_BUPA_MWX_BPR_FILL_CENTRAL
Thanks in advance!
Regards,
Tom

Customizing replication object for customer group setting

Hi All,
We need to download customer group values & Material Groups values maintained in SD customizing to CRM sales.
Could not able to get customizing object which can be used to download these customizing using R3AS.
Please help.
Thanks & Regards,
Dhanraj Dange

try Tx r3ac1 and r3ac3.

Employee / customer replication

Similar Messages

Maybe you are looking for