Empty trash has stopped working
Running 10.7.6 Lion.
Was doing a big clean up
Of the hard drive and the Trash would not empty.
Any advise appreciated.
Thought that perhaps I should just upgrade to Mountain Lion.
But, I'm happy with Lion; except for this.
empty the trash bin regularly, or it might take ages to empty.
First method:
click the Trash bin while holding Alt(option) key; the Trash bin opens, and, while still holding the Alt key, from the Finder menu click "empty trash".
Second method:
use a Terminal command, and it will be empty very quickly:
open Terminal and copy/paste following command in it then hit enter:
sudo rm -Rf ~/.Trash/*
Quit Terminal from the menu.
Similar Messages
-
System sound (like when empty trash) miserably stop working in Lion 10.7.2
I have upgraded to Lion10.7.2 on my Macbook Pro early 2008 Intel 15 inches, and the update went fine except one annoying problem I found so far.
This problem also occurred in 10.7.0 and 10.7.1 and it seems that no fix has been made in 10.7.2
The problem is when I drag file to Trash and empty it, there should be trash empty sound effect, and this has been with us since Tiger.
In 10.7.2 it work as expected, but when I close the lid to get it to sleep, once I open the lid, the system sound is gone without no reason.
When I play music from iTunes, or when I change volume level, the sound effects work as usual, but empty trash sound stop working miserable.
I have to shut down, press Option-Command-P-R and power on to reset PRAM then system sound like empty trash come back. Again, afpr may be half a day, it's gone again
Any friend here has solution for this? The com.apple.soundprefs.plist file, if you delete it, in Lion, it is not recreated again, and it's gone forever. SO delete plist file is not a solution.
Help pleaseI found a workaround to my problem accidentally.
As the system sound like empty trash or file drag sound stop working miserably, after close the MBP lid to sleep, after it awake, system sound just stop working.
Before this, I have to shut down my MBP, reset PRAM by press Option-Control-P-R and power on, to get the system sound back
But I found that the workaround whenever the system sound stop working thad do not require reboot is:
1. Go to System Preference-Sound
2. Change Play sound effects through: Internal Speakers to Soundflower 2ch) in the drop down list.
(Soundflower has been installed by a software called iShowU HD (screen capturing software))
3. Slide to change Alert Volume from the original position
4. Switch back to Internal Speakers from Soundflower 92ch) in the drop down list
5. Change Alert Volume by moving slide bar back to the desirable position
Immediately, the sound effects that stop working will start working again.
This just work for my case. I don't know it will work for ther people that have the same problem as me or not.
And if possible, can some expert here give me explanation why doing the above make system sound effect to work again? mI want to know the cause, and definite solution to the problem
Advise and suggestion please. Thank in advance -
"Adobe Flash CS5 has stopped working" error anytime i do anything - HELP PLZ!
Hi there,
I have used Macromedia Flash MX for many, many moons. Finally, when I got Windows 7, I was VERY excited to get updated on MX and move to Adobe Flash Professional CS5. However, i have never once been able to use this program, as it crashes pretty much every time i try to do anything. However, since my upgrade, i've noticed a lot more crashing in MX as well (i still have it installed on my old HD and have been using it to build videos rather than CS5 since it crashes less frequently). Now, i'm at my wit's end. I get the above error message when i do pretty much anything, but most recently it's EVERY time i try to select all unused files from the library. The error message i get in MX is "Flash 6.0 r25 has stopped working," but it's the same exact problem in the problem signature as CS5's:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 11.0.0.485
Application Timestamp: 4badda9d
Fault Module Name: Flash.exe
Fault Module Version: 11.0.0.485
Fault Module Timestamp: 4badda9d
Exception Code: c0000005
Exception Offset: 005c0478
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
If i try to select "Check online for a solution," in MX it just kills out of the program, but in CS5 it gives me a second error before killing out:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 11.0.0.485
Application Timestamp: 4badda9d
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0150010
Exception Offset: 0008482b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 2865
Additional Information 2: 2865b1bb537c4d5e61b79207bc968f0a
Additional Information 3: 2116
Additional Information 4: 2116da8c99f9527466231198673244ae
PLEASE tell me there's a way to fix this. I've tried everything I can think of and have to get this video done in the next few days!!!! I would love to be able to start using CS5 and ditch the ancient MX on my slaved drive, but I can't get CS5 to work!
Thanks.3. (Windows) Disable Compatibility Mode.
For information on compatibility mode, see Using Windows 7 or Vista compatibility mode.
Windows Compatibility Mode can cause errors to occur with Adobe Creative Suite products. To disable it, do the following:
Navigate to C:\Program Files\Adobe\[application name].
Right-click the product application file and choose Properties.
In the Compatibility tab, deselect all options under Compatibility Mode, Settings, and Privilege Level.
Click OK, and relaunch the Adobe Creative Suite 5 product.
4. Disable startup items and services.
Applications running in the background can prevent Creative Suite 5, CS5.5, and CS6 products from launching. For instructions on temporarily disabling these items, see the following documents:
Disable startup items and Services (Windows XP)
Restart Windows in a modified mode (Windows 7 and Windows Vista)
Start the system in Safe Boot mode (Mac OS)
5. Log in using a new local administrative user account.
A new local administrative account can rule out network policies, corrupt profiles, and incorrectly setup administrative accounts as the cause of a failed launch. To create a local administrator account, see the following:
Windows XP: Choose Start > Help And Support and see the article "Add a new user to the computer," or contact your system administrator.
Windows Vista/Windows 7: Create new local administrator account (Windows Vista) (kb404912)
Mac OS: Creating and modifying user accounts on the Apple support website. This video demonstrates the procedure to create a Standard user account. To create an Administrator account, select Administrator in the New Accounts menu.
6. Delete all Adobefnt*.lst files
Search for and delete all copies of the AdobeFnt*.lst file that you find on the hard disk:
(Mac OS) In the Finder, choose File > Find (Command + F).
(Windows XP) In Explorer, click the Search button (Ctrl+F).
(Windows Vista/7) In Explorer, use the search box in the upper right (Ctrl+F).
Type Adobefnt*.lst and then click the Search icon. If you have more than one hard drive, only search the system (OS) drive.
(Windows XP Search Assistant) Choose All Files and Folders. Under More advanced options select Search System Folders, Search hidden files and folders, and Search subfolders.
Click within the search results. Choose Edit > Select All, and then drag the selected files to the Trash (Mac OS) or Recycle Bin (Windows).
(Mac OS) Choose Finder > Empty Trash.
Restart the application.
If an Adobefnt*.lst file becomes damaged, it can cause the application to crash, freeze, or quit when you try to start it. Adobefnt.lst files (for example, Adobefnt10.list for InDesign) are font cache files that Adobe applications use to quickly gather and store information about available fonts. If you delete or rename an Adobefnt.lst file, the application re-creates it the next time you start the application.
7. Troubleshoot font issues.
Remove or disable nonessential fonts and then restart your Creative Suite application. See:
Reduce the number of active fonts (Windows XP)
Reduce the number of active fonts (Windows 7 and Windows Vista)
Troubleshoot fonts (Mac OS)
8. (Windows) Update your video card driver.
Download the latest driver from your video card manufacturer's website or contact the manufacturer for an updated driver.
9. Search the knowledgebase for errors.
Search the Adobe knowledgebase for any errors that appear:
Go to the Adobe Support website and choose your product from the Select Product Support Center menu.
Type the error into the search field and click Search.
Note: Omit file paths and registry keys from the search string.
10. Run the Adobe Support Advisor.
The Adobe Support Advisor is an AIR app that helps identify and resolve installation issues. It can also assist with errors that occur when AMT is running. For more information, see Using the Adobe Support Advisor (kb405816) and Troubleshoot launch errors using Creative Suite launch logs (cpsid_83478).
11. Perform system troubleshooting steps
Follow the steps in Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS (cpsid_82414). -
Adobe Bridge CS6 has stopped working - has issue been resolved?
Hello.
I am experiencing the above problem with a new install of CS6.
Has this issue been resolved?
CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
Thanks for any help you can provide.A follow up to the above.
There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
For those of you who may have this situation.
Here is where I found the solution (sixth thread down):
Bridge CS6 won't open running on Win7 -
I can't open my Itunes program in my laptop computer with windows 8. the message is "Itunes has stopped working. A problem causess the program to stop working properly. windows will close the program and notify you if a solution is available". I reboot the machine, Uninstall and re install the Itune program, stilll the same message pops up.
The first thing to try is System Restore to take you back to a point in time when it did work. If that is not successful, create a new user on the computer. log in with that and see if ID will start. This will tell us if the problem is in the system/program or the user account.
If it works in a new user account, see Replace Your Preferences and in addition to replacing the prefs, empty the InDesign Recovery folder that will be in the same location and the InDesign SavedData file. -
Itunes Has Stopped Working, Program closes
I have recently just updated my Itunes and it has stopped working. This happened in a previous updated version, but after a reinstall i was able to get it to work. This time it did not work, and I can't seem to find a way to get the program to work now.
The error looks like this...
I open itunes from shortcut on desktop or exe file from program file
I see itunes is opened up, i can see my playlists/songs everything
Before i get a chance to do anything windows pops up with a window and says
"Itunes has stopped working...windows is checking for a solution to the problem...A problem caused the program to stop working correctly. windows will close the program and notify you if a solution is available.
I can only click on the "close program" button.
I have tried a reinstall twice now, and am lost for ideas on how to fix this. I'm not amazing at troubleshooting problems, so I've posted the error that shows up in my event log. Any help would be appreciated so i can continue to use the itunes store, and update my iphone.
Dell Vostro 1510
Windows Vista Home Basic 32-bit
Service Pack 2
Version=1
EventType=APPCRASH
EventTime=129022629143916684
ReportType=2
Consent=1
UploadTime=129022629169746684
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=iTunes.exe
Sig[1].Name=Application Version
Sig[1].Value=9.0.2.25
Sig[2].Name=Application Timestamp
Sig[2].Value=4ae90227
Sig[3].Name=Fault Module Name
Sig[3].Value=QuickTimeH264.qtx
Sig[4].Name=Fault Module Version
Sig[4].Value=7.64.17.73
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4aa21f41
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=000587a4
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.0.6002.2.2.0.768.2
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=fd00
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=ea6f5fe8924aaa756324d57f87834160
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=fd00
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=ea6f5fe8924aaa756324d57f87834160
UI[2]=C:\Program Files\iTunes\iTunes.exe
UI[3]=iTunes has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=iTunes
AppPath=C:\Program Files\iTunes\iTunes.exeGood job posting the event log entry, Charlie.
Sig[3].Name=Fault Module Name
Sig[3].Value=QuickTimeH264.qtx
Okay, taken at face value this is suggesting there's a problem with your QuickTime (which makes sense in context, because iTunes requires a properly functioning QuickTime in order to run).
So, let's first try swapping out your existing QuickTime.
Head into your "Uninstall a program" control panel. Uninstall QuickTime.
Next, we'll clear away any leftover QuickTime program files or folders.
Restart your computer.
After the computer restarts, open Local Disk (C:) located in Computer or whichever hard disk your programs are installed on.
Open the Program Files folder.
Right-click the QuickTime folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
Open Local Disk (C:) located in Computer or whichever hard disk your operating system is installed on. Open the Windows folder. Open the System32 folder.
Right-click the QuickTime file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
Right-click the QuickTimeVR file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
Right-click the Recycle Bin and choose Empty Recycle Bin.
Restart the PC and download and save a copy of the QuickTime standalone installer to your hard drive (get the one that doesn't mention iTunes):
http://www.apple.com/quicktime/download/
Install QuickTime by doubleclicking the QuickTimeInstaller.exe file.
Restart again, and try launching iTunes again. Does it launch without the error this time? -
Hp support assistant has stopped working windows 8
My HP Support Assistant has stopped working. I have read other comments on the forum concerning this problem and attempted to follow their advice. But I am still having the same problem. I uninstalled the HP support in the Control Panel uninstall programs. I restarted my computer then reinstalled the HP support. When installing it asked if I wanted to write over all of the files because HP files were still on my computer. Apparently it did not fully uninstall. I emptied my recycle bin and cleaned out my registry after I tried to uninstall the HP file again. Went back and reinstalled HP support again. This time I did not get the message that it was already installed and do I want to overwrite the files. I thought that the problem was solved but it is not. I cannot get the HP support to work at all. Please can anyone tell me what to do. I am not very savvy with computers and sure use some help.
My computer is an: HP Envy 20 TouchSmart 20d011 - using Windows 8.
I had this problem with another HP computer and called Tech support and they told me to completely restore my computer and then my hard drive crashed. I had to send the computer back an purchased this one. But now dejavu all over. Thank you for any response to my question.Hi
Here are few links given below might help you to fix your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03601631
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02028499
http://www8.hp.com/in/en/support-topics/windows8-support.html
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
ITunes has Stopped Working in Vista
Browsing this forum, I see quite a few people are having trouble with the newest version of iTunes.
Ever since I upgraded to iTunes 7.5 a few weeks ago on my 32-bit Vista Ultimate, the program will no longer run. When I try to start iTunes, I get a message saying "iTunes has stopped working. Windows can check online for a solution to the problem." Also, whenever I start up Windows, I get a similar message saying "iTunesHelper Module has stopped working."
When I tell Windows to check online for a solution, it just gives me a page telling me there's a newer version of iTunes, but it is the newest version that I'm trying to run.
Any thoughts?This solution has worked on one of my 4 computers so I can't guarantee but it might be worth a try.
Uninstall Itunes and Quicktime. Reboot your computer
Empty out the recycle bin
Use Search to locate any and all files and folders that reference itunes or quick time. Of course do not touch your music folder.
Delete all these references to itunes and quick time.
Reboot.
Download a standalone version of Quick time and install.
Download Itunes (I used version 7.4.1 that I obtained from Oldapps.com.)
Once this was done I was able to run itunes on my laptop. I did upgrade to 7.5 but I could not get my sons nano 8GB to sync so I reverted back to 7.4.1 and it works just fine.
I have yet to get itunes working on My wifes vista laptop and it quit working on my XP desktop some time ago (I have never used it and wouldn't care except my son just bought the nano) Itunes a version prior to 7.4 was running on my sons laptop until he upgrade to 7.5 when he bought the nano, just last Friday, and 7.5 totally borked things up. Aside note is that his hard drive crashed a day later, but I don't think that had anything to do with it.
If you read through this board you will find that itunes and windows are not getting along well at all. If you have a "new" ipod be it nano, classic or what ever I beleive you must use version 7.4 or newer. It seems to me that if Apple really wants floks to buy these things they should be sure the primary piece of software is stable and works! -
The pdf engine in Safari has stopped working. I can no longer view pdf files in Safari. I simply get a black window when pdf files are downloaded
Hi..
Go to /Library/Internet Plug-Ins
Move the AdobePDF browser plugin to the Trash.
Try Safari.
If you have problems locating the plugin...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/Library/Internet Plug-Ins
Click Go -
My firefox has stopped working with my comcast email. It is loading fine on safari but it is no longer loading my email in a timely manner on firefox. Comcast says it is a firefox problem. They suggest I uninstall and reinstall firefox. Do I just drag everything to the trash and download a new version? in English
== URL of affected sites ==
http://
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_4_11; en) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7"Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Thunderbird has stopped working
Hello,
Starting on 04/08/2014 the Thunderbird has stopped working in any way in my PC. I am running Windows 8.1 Pro x64. Before that day everything was ok and Thunderbird was working. I asked some friends using Windows 8 and they have the same problem. Thunderbird won't load the email accounts and won't send and receive any email. It won't even let us add a new email account. The message received when trying to add a new account is the following "Sorry - we're unable to communicate with our sign-up server. Please check your connection.". Also if we will try to move forward and add a new email account anyway the answer will be that Thunderbird can't connect to any server. We have uninstalled Thunderbird and install it again several times in the past days with no success. I was looking t delete the Thunderbird folder in Program files but I can't find it. The uninstall and install again procedure including deleting folder was a solution few years ago but it seams that now is not working anymore.
In the past 2 weeks Thunderbird started working only for few hours and we have the same problem again. I was asking around 10 people working with Thunderbird and they have the same problem at the moment and they had the same problem in the past month.
Of course I turned off windows firewall and test if Thunderbird will work but it was not a solution. I am running windows 8.1 Pro x64. Thunderbird is not on the list of the allowed or not allowed software through firewall and I can't find any option to add the Thunderbird to the list in order to try to solve the problem.
I am running BitDefender antivirus and I turned off the BitDefender firewall and the same thing happens. I also turned off the whole antivirus functions after and the same thing. I turned of bot windows firewall and BitDefender firewall or turned off the whole BitDefender and the same thing happens. I checked the BitDefender firewall and the Thunderbird has full access.
Also I have checked the Windows updates. I usually not allow updates in my PC. I remember that I choose not to install Microsoft updates ever. I checked the status and it is set up not to install Microsoft updates. I also checked the "update history" and is empty an the status is "you have not tried to install any updates on your computer".
I started windows 8.1 Pro x64 in Safe mode with networking and started Thunderbird while windows was in safe mode and it has the same problem.
I am trying to add Gmail and AOL accounts in Thunderbird. The emails are all set correctly and working well in browser or other email client.
Today (04/21/2014) Thunderbird has the same problem.
Any help will be much appreciated.
RegardsHere you also have the copy of the Troubleshooting Information if necessary.
Application Basics
Name: Thunderbird
Version: 24.4.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
Profile Folder: Show Folder
(Local drive)
Application Build ID: 20140316131045
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
account4:
INCOMING: account4, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
Extensions
bdToolbar, 7.0, false, [email protected]
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.4.0
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
mail.openMessageBehavior.version: 1
mail.winsearch.firstRunDone: true
mailnews.database.global.datastore.id: 8057ef62-d03a-4da8-a08b-58764ba65fd
network.cookie.lifetimePolicy: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1397398207
places.history.expiration.transient_current_max_pages: 104858
plugin.importedState: true
privacy.donottrackheader.enabled: true
Graphics
Adapter Description: Intel(R) Iris(TM) Graphics 5100
Vendor ID: 0x8086
Device ID: 0x0a2e
Adapter RAM: Unknown
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Driver Version: 10.18.10.3345
Driver Date: 10-31-2013
Direct2D Enabled: false
DirectWrite Enabled: false (6.3.9600.16384)
ClearType Parameters: ClearType parameters not found
WebGL Renderer: false
GPU Accelerated Windows: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC -
"Adobe elements has stopped working."
I've received the error "Adobe elements has stopped working" and then the program closes. It has happened numerous times and now happens more and more often. Does anyone have any fixes for this?
I've been having the same problem.
Win7 64bit 8GB RAM, 500GB free hard drive space. All Win updates in place on a regular basis (last time was 2 days ago).
I often get the "stopped working" popup message on my desktop right after I close the program (well, yeah, I would hope it would stop working when I close it) and also increasingly get it on the desktop when I open the program (before the PE12 screen opens). This latter popup "stopped working" message will persist until I close the popup window, even though the program is working just fine.
The most occurrences of actual crashes seem to be when doing a lot of titles (new or editing existing), when saving, and when exporting.
For awhile it seemed (very subjectively) that rendering the project before saving or exporting possibly helped reduce the number of occurrences, but just now the "stopped working" message popped up and the program quit while I was rendering (got about 80% through).
This time I checked the "check online for a solution" box, but to no avail--there was a brief period while Windows searched online, and then the program shut down anyway.
I've tried rebooting, making sure other programs were closed, etc. but nothing really seems to have much effect. The same project will save or export just fine on one occasion, then if I so much as change a word in a title it will become unstable. The entire project is 26 minutes long. One video track (2) with titles, one main video track (1), one audio track (mostly empty) of ambient sound with the video, one sound track.
I will try Steve's suggestion of Ctrl-Alt-Shift for awhile on opening. (This helps when PSE tools freeze up.) Thanks for the tip! -
Elements 8.0 has stopped working and closes
In the video effect panel, the simple act of scrolling down freezes de app and the message
Elements 8.0 has stopped working appers and windows closes the app.
event viewer
Faulting application name: Adobe Premiere Elements.exe, version: 8.0.0.0, time stamp: 0x4aa5c87c
Faulting module name: nvSCPAPI.dll_unloaded, version: 0.0.0.0, time stamp: 0x4a891469
Exception code: 0xc0000005
Fault offset: 0x37b75ce4
Faulting process id: 0x15c8
Faulting application start time: 0x01ca6ac334f177cc
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Elements 8.0\Adobe Premiere Elements.exe
Faulting module path: nvSCPAPI.dll
Report Id: d3c67914-d6b7-11de-aed1-001a4d9b019b
There is a message at the lower left coner saying display performance will be poor due to incorrect operating graphics card or driver!
This message is always there.
The problems happens with all project with Apple MOV file from my Canon SD780 a 720 30 frame H.264 file
With a project empty (no clips) imported the problem does not happens. As soon as you import a file the error happens.
This is a brand new W7 install 2 HD SATA separate from the DVD IDE channel.
Swapp file also separate in the second HD.
The videos were imported from the folder since i already had the files before i bought Elements
The preview of the mov files (just open the file without any editing) in Elements is very choppy. In Windows (in QuickTime) it is perfect and uses only 35% of CPU
Latest driver applied and KB kb402534 followed
[Display]
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2612 MHz)
Operating System: Windows 7 Professional, 32-bit
DirectX version: 11.0
GPU processor: GeForce 8500 GT
Driver version: 191.07
Stream processors: 16
Core clock: 500 MHz
Shader clock: 918 MHz
Memory clock: 400 MHz (800 MHz data rate)
Memory interface: 128-bit
Total available graphics memory: 1023 MB
Dedicated video memory: 256 MB
System video memory: 0 MB
Shared system memory: 767 MB
Video BIOS version: 60.86.34.00.13
IRQ: 16
Bus: PCI Express x16
[Components]
nvCpl.cpl 2.7.170.15 NVIDIA Control Panel Applet
nvCplUI.exe 2.7.170.15 NVIDIA Control Panel
nvWSS.dll 8.16.11.9107 NVIDIA Workstation Server
nvViTvS.dll 8.16.11.9107 NVIDIA Video and TV Server
NVSTVIEW.EXE 7.16.11.9062 NVIDIA GeForce 3D Vision
NVSTTEST.EXE 7.16.11.9062 NVIDIA 3D Vision Test Application
NVSTRES.DLL 7.16.11.9062 NVIDIA 3D Vision Module (4512197)
NVMCTRAY.DLL 8.16.11.9107 NVIDIA Media Center Library
nvDispS.dll 8.16.11.9107 NVIDIA Display Server
NVCPL.DLL 8.16.11.9107 NVIDIA Compatible Windows7 Display driver, Version 191.07
NVCUDA.DLL 8.16.11.9107 NVIDIA CUDA 2.3 driver
nvGameS.dll 8.16.11.9107 NVIDIA 3D Settings Server
Any solution?
thanksWith the new nVidia drivers, the first thing that you will want to do will be to go to the nVidia console and disable 3D Sterevision. No Adobe program can use it. It is designed for gamers with the 3D Stereovision goggles.
If that does not fix things, go back to the console and disable PhysX. It too is a gamer module.
Good luck,
Hunt -
User issue-- "itunes has stopped working"
This week I have been unable to access iTunes, instead receiving the following error message: "iTunes has stopped working."
I have reviewed earlier discussions, especially this recent one:
http://discussions.apple.com/thread.jspa?threadID=1464059&tstart=15
I have tried most of the suggestions, but I have run into a few roadblocks that I wanted to see if I could get some help with. But before all of that, I wanted to note that I created a new user account and was able to access iTunes that way. Unfortunately, however, this is not a good long term solution. I would like to try to resolve whatever issue exists with my user account.
With respect to the potential solutions identified in the earlier post:
*“Completely Remove iTunes and Quicktime”*
#17—no such files existed in my windows\\system32 folder.
*“Empty your Temp directory and restart”*
I got the following error message :The action cannot be completed because the folder is open in another program. Close the folder and try again. I thought that I had closed all of the applications.
*“Clean Up iTunes installer files on the computer”*
When you click on the link under this suggestion, you get a warning from Windows not to use this utility with 2007 Office system products, which are what I have.
*“Download Quicktime Standalone Installer”*
I have no interest in Quicktime and only have it because it is apparently bundled with iTunes. Still, I tried this and it did not fix the problem. (BTW, Quicktime still works fine.)
*“Disable other conflicting software”*
I used MSCONFIG to try to troubleshoot conflicts. First, the instructions in article 305415 indicate that the following two items will be under the "startup" tab: "iTunesHelper" and "qttask." These were not listed. Second, when I clicked the "services" tab and selected "hide all microsoft services," there were 25 items still listed, which seems not right to me. I did not proceed here because I was concerned about causing some disaster.
If anyone has any insight here and would be willing to share it, I would greatly appreciate it!
PS--is there a way to copy and paste the list of startup programs so that I can print them and review them one by one? Thanks!+But before all of that, I wanted to note that I created a new user account and was able to access iTunes that way.+
Up until now you've been working through techniques for troubleshooting System-wide problems. But that fact you relate about the user accounts indicates that you've got a user-account-specific problem, and the troubleshooting techniques are different for those.
In your normal user account, try the techniques listed under "User-specific Troubleshooting" in the following document:
iTunes for Windows Vista: Troubleshooting unexpected quits, freezes, or launch issues -
"iTunes has stopped working" when going to iTunes store
Opening iTunes works fine, until I click on the "iTunes store" button. The I get the message "iTunes has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
This happened just after upgrading from windows 8 to 8.1
"view account" produces the same error.
Login into account works fine. (menu bar at top left; iTunes store > sign in)
I'm using iTunes 11.1.2
C:\Users\username\App Data\Roaming\Apple Computer\iTunes\iTunes Plug-ins\ is empty
Quicktime starts fine.
Unintstalled and reinstalled iTunes.
Same problem occurs in safemode (ctr shift start up).
I tried deleting the SC Info.sid* files, but problem still occurs.
Updating genius works fine.
Still occurs when running as administrator
Ran repair from the control panel on both iTunes and quicktime.
Any suggestions on what I can do about this?I am running Windows 8.1 and iTunes 11.1.3.8. I found a simple solution by browsing through the support communities. Here it is: Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support to: C:\Program Files (x86)\iTunes
This worked for me. Good luck.
Maybe you are looking for
-
Can no longer open my Compuserve email with Firefox
As of 4 days ago I can no longer open my emails on my laptop. Compuserve helped change my internet explorer settings, disconnect my McAfee firewall, and allow all cookies. They advised the problem was that something in Mozilla was blocking the comple
-
A few question from a contemplating "user/buyer"
I am very interested in purchasing the AEBS w/ modem and an airport card for my G4 PowerBook. I did have some questions as I contemplate this purchase, and I apologize if this has been covered somewhere else: 1. I'm still only using a dial-up connect
-
How to put apps in list instead of icons, like a table of contents?
I have a bibliographer's mind and like listings, catalogs, not icons. I have searched several times and can't find a way to turn all my icons into an nice alphabetical list. I love iTunes because they organize in a way that makes sense to me. On the
-
I have recently bought a new i pad. I have the ION PIANO APPRENTICE and it has an older connection, compared to the new i pad. Is there an adapter or a connection you can buy that will allow you to plug the new i pad into an older device ?
-
Ipod can't get music synced anymore but can get podcasts and photos.
my ipod has worked great for 2 years but went to use it this morning after syncing and there was no music on it. itunes shows that there is music downloaded on my ipod but when i go to the ipod there is no music. i have synced my ipod/reset it and ev