Error 0x80007114 "Outlook Express could not be started" when trying to run Migration Assitant.

Trying to run Migration Assistant on a PC (Windows XP).  Error message "Outlook Express could not be started.  The application was unable to initialize the store directory.  Your computer may be out of memory or your disk is full. Contact Microsoft support for further assistance. (0x80007114)"  Then the Migration Assistant shows a box stating that Outlook Express must be stopped before running the assistant. 
I have enough memory.  The disk is not full.  Outlook Express runs just fine on my PC.  And it was not runing at the time.
Apple Support (two tries) and my Apple store have essentially said this is a Microsoft problem.  Of course, Microsoft says it is an Apple program failing so it is an Apple problem.
MS info about the error indicates that it prevents OE from starting.  Than is not my situation at all.  The fix is draconian (as many are) and could risk my OE so I have not gone there - yet.  Hopefully there is another way.
Does anyone have any experience on how to (easily) solve this dilemma.  I am also trying on the MS side. 
This is my first MAC.  I was convinced to go Apple by several folks who touted the excellent support.  It was purchased in July 2012 and has been a boat anchor since.  Support??
Thanks for any info you can provide.

So I had this as well.
I went to the file tab and went to export. From there I picked 720p and it worked. It may be different for you depending on the resolution of the video. hopefully it works for you too!

Similar Messages

  • Why am I getting the error the installation package could not be opened when trying to install on Windows 7 64 bit

    I reciece the follwing message when trying to install
    "The Installation package could not be opened. Verify that the package exists, or contact the application vendor to verify that this a valid windows installer package"

    Hey there Frank0619,
    If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
    Issues installing iTunes for Windows
    These in particular: 
    Make sure you have an administrator account.
    To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Install the latest Microsoft Windows updates.
    To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Download the latest version of iTunes.
    The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
    Disable conflicting software.
    Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig: 
    Using Msconfig to troubleshoot conflicts in Windows XP
    Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
    Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
    Restart your computer.
    Install iTunes.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT4796 Error 0x80007114 Outlook Express cannot be started.

    Window Migration Assistant fails immediately with the above error.  OE runs fine on the PC.

    Here is what I am trying to do:
    Windows Migration brings the following information from your Windows  PC (Windows XP SP3 or greater) to your Mac:
    Email: IMAP and POP accounts from Outlook, Outlook Express, Windows Mail and Windows Live email accounts are transferred to Mail. Email metadata such as read, replied, and flagged are transferred from Outlook, Outlook Express and Windows Mail to Mail in OS X.
    Contacts: Outlook and Outlook Express contacts, and Windows Contacts from the Contact home directory are transferred to Address Book.
    Calendars: Outlook calendars are transferred to iCal
    iTunes library, including music, photos, videos and apps and  games for iOS devices, except rentals
    Home directory folders and content, including Music, Pictures,  Desktop, Documents, and Downloads
    Browser bookmarks and homepage from Internet Explorer, Firefox,  and Safari are transferred to Safari
    User settings including localization, locale, and any customized  desktop picture
    The problem is obviously somewhere on the PC side since the Windows Migration Program fails on the PC but I am starting with questions here because surely someone in the Apple community has seen this problem and has a solution. 
    This is the first thing I have tried on my new Mac (first time Mac user) and it failed.  Not a good start Apple!!
    The full error on the PC side is "Outlook Express could not be started.  Unable to initalize store directory.  Out of memory or disk full.  (0x80007114)"  SInce OE runs fine on the PC, I have no idea what this means or how to get around it.
    Any ideas/help would be appreciated.  I really would hate to have to go to MS with this question...

  • Hello dps team,  A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again la

    Hello dps team,
    A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
    Is there a problem with our dps version or any maintenance work at the servers from Adobe?
    Best,
    Oliver

    Hi Oliver,
    Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
    Thanks
    Lohrii

  • Deskjet 2542 all in one error: 'the specified module could not be found' when installing to USB

    Installation proceeds OK until the USB cable is connected, when the error message is displayed and installation ceases.
    I have successfully istalled and run the printer on another XP PC of a similar age - ie old.
    I have upgraded the XP OS to SP3 with numerous updates;
    Checked that the USB ports read Data sticks OK;
    run a/v and malware programs, including Microsoft Safety Scanner;
    checked that USB drivers are up to date;
    uninstalled driver software and re-installed with software downloaded from HP;
    carried out the procedures detailed in HP Support Forum 4022116
    Error message the same.  
    This is for my elderly neighbour - help please!
    This question was solved.
    View Solution.

    Hi @bodger50,
    Welcome to the HP Forums! 
    I understand that your HP Deskjet 2542 gives you the error: 'the specified module could not be found' when installing to USB, on Windows XP.
    I would recommend going through the steps in this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). When you get to the printer install wizard section, just use the full feature software and drivers found at this website, HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. As the printer install wizard is only for Windows 7 and up.
    Hope this is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • What can I do if my iphone4 is not turning on and itunes is saying "Session could not be started" when I want to sync it so I can restore my phone?

    What can I do if my iphone4 is not turning on and itunes is saying "Session could not be started" when I want to sync it so I can restore my phone?

    Hold down your on/off and home button until you see the Apple logo, but first plug your iPhone into a power outlet to make sure it has enough battery power. 

  • The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt

    I am getting below error message while search crawl in sharepoint foundation 2010 search for only .VSD files and not for any other docs type.
    The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt. 
    I have installed the Microsoft Filter Pack 2.0 in search server but still i am getting the same error.
    <//span>
    Any one's help will be appreciated.
    Regards,
    Rashmi
    Rashmi Singhal

    Hi Rashmi,
    1. Checked the file extension is added or not to the search file types.
    2. Checked file name has any invalid characters.
    3. Resetting the crawl index and run a full crawl .
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    Hey there Frank0619,
    If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
    Issues installing iTunes for Windows
    These in particular: 
    Make sure you have an administrator account.
    To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Install the latest Microsoft Windows updates.
    To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Download the latest version of iTunes.
    The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
    Disable conflicting software.
    Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig: 
    Using Msconfig to troubleshoot conflicts in Windows XP
    Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
    Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
    Restart your computer.
    Install iTunes.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • "Could Not Sign In" when Trying to Restore Icloud on a brand NEW Iphone 5S

    "Could Not Sign In" when Trying to Restore Icloud on a brand NEW Iphone 5S
    It says "there was a problem connecting to the server?"
    Wi-Fi in range, ID and Password Correct.... What is going on?

    Check that the email address is correct for your login. You'd be surprised how many times I've seen people see the prompt and just go with a password and not realize that the email address was wrong.
    Aside from that, you can try resetting your password via the iForgot app.
    If you forgot your password, you can easily recover or reset it using iForgot. For security reasons, Apple cannot reset your password for you. To protect yourself against unauthorized purchases to your credit card, do not give out your password to anyone.
    NOTE: If you attempt to sign in to the Apple Online Store numerous times with the wrong password, you will see the following error message: “This Apple ID has been disabled for security reasons." To reset your account, use iForgot.

  • HT1414 i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

    i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

    Thank you. No my phone hasnt been jailbroke, therefore I'll keep trying.

  • TS2830 Sync for IPod Touch quit working and I get error messages "a session could not be started" and "a connection could not be established" although the IPod appears in ITunes.

    This is a new problem for an IPod Touch  I have had for a year.  The IPod is hooked up by cable and appears in ITunes. I can examine all the content on the IPOD  and I can click "sync".  It goes through to Step 7 and then the error messages occur.  First "a session could not be started with the IPod" and when that dialogue box is closed, the message "a connection could not be established to the IPod." 

    Maybe:
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities
    iphone could not be synced sync session failed to start...: Apple Support Communities

  • System error 3 OracleDBConsoleorcl service could not be started.

    Hallo!I installed Oracle 10g on my Windows XP while connected to my modem that accesses the internet via DHCP.
    I installed the Microsoft Loopback Adapter to force my OEM and isqlplus to use the static IP 10.0.0.1.
    When I try to launch my OEM via http://joey-xp:1158/em (hostname joey-xp resolves to 10.0.0.1),I am unable to launch OEM.
    From the cmd prompt,I type emctl start dbconsole.
    C:\Documents and Settings\JOEY>emctl start dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://127.0.0.1:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
    The OracleDBConsoleorcl service could not be started.
    A system error has occurred.
    System error 3 has occurred.
    The system cannot find the path specified.
    I don’t understand why the default loopback (127.0.0.1) is being used.
    How do I solve this?
    Thanks.

    Thanks zekeriya but unfortunately using
    emca -dbconfig dbcontrol db
    does not help.
    The system error 3 still appears.
    Thanks.

  • I have iphone 4s that won't sync. Using windows 7, iphone software is up to date as is itunes. Itunes says sync session could not be started when iphone plugged in or over wifi.

    Have tried to sync my iphone 4s over wifi and using usb. Both methods unsuccesful. Have checked to make sure updates are not needed for iphone and itunes, have evem restored iphone system which wiped music, pics and apps from iphone. Message comes up saying "sync session could not be started." Windows 7 recognises iphone is there, as does itunes but itunes will not sync with iphone. Don't know if it helps at all but i did recently add an old 2nd gen ipod mini to the same itunes. Would this have any affect on iphone not syncing? Any advice would be amazing as this is very frustrating. Thank you in advance to anyone who can help.

    You get this message when trying to back up to iCloud?  That error message is normally associated with backing up to your computer using iTunes, not backing up to iCloud.  Check Settings>iCloud>Storage & Backup to be sure iCloud Backup is turned On at the bottom.

  • "error loading media-file could not be played"-when viewing webcams

    When trying to load a webcam, picture loads but will not stream.
    The following error message appears "error loading media-file could not be played"
    Everything functions when using Google Chrome.
    Any help would be much appreciated. The operating system is Vista.

    Thank you for you reply - much appreciated.
    I am a bit confused - if I do not have a player installed, how come that everything is OK when I use Google Chrome as a browser?
    Many thanks,
    Jimmy

  • Trying to update iTunes but keep getting the error messag "the url could not be opened" when it's always worked fine in the past. What does this mean?

    Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!

    Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
    tt2

Maybe you are looking for

  • Add-mailboxfolderspermission to all folders, not one at a time

    I wanted to add folder permissions to a user but it seem you can only give permission to folders one a time. Bu I wanted to add permissions to all folders at one time, is there a parameter I can use ? Here is the example of adding permissions to the

  • Adjust no longer works since 8.1 update

    Since updating to 8.1, the adjust functionality no longer works. That is, when I select a photo and click edit, I get to the edit screen as usual. When I click the adjust button, the floating adjust pane appears. I can move the sliders as usual, but

  • From message to attachment in Mail adapter

    Hello, I am searching for information about this issue: An incoming message from a WebService needs to be mapped to a target structure . SAP PI has to create a file (csv) and add it as an attachment to a mail. So this is the process: WebService -> Ma

  • Need information on SMARTFORMS

    hi i m looking for some information on SMARTFORMS. why it is needed? what is difference between smartforms and sapscripting? if someone could send some docs. how to work on smartforms it will begreat

  • LR 5.3 will not open Sony A7r files, can anyone please help?

    I installed lightroom 5 from disc, then updated to 5.2 and 5.3 so I could open files from the Sony A7r.  After hours, I keep getting "files can not be read".  I am able to open the files in PS 6.  I have reinstalled LR twice.  I probably need to be f