Error 4280 - Won't burn, NOT a Sony CD-R Drive - HELP!

I've read the other posts involving this. Updated itunes and now I can't burn on my BRAND NEW system. Have a TSSTcorp CD-RW TS-H292B drive. Driver appears to be updated for the drve. CD Diagnostics below. Anyone help? Please?
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DXP051
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X300 SE 128MB HyperMemory\RADEON X300 SE 128MB HyperMemory
IDE\DiskWDCWD2500JS-75NCB1____________________10.02E01, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD-ROM_DDU1615____________________FDS2___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTSSTcorpCD-RW___TS-H292B_______________DE03___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD-ROM DDU1615, Rev FDS2
Drive is empty.
E: TSSTcorp CD-RW TS-H292B, Rev DE03
Audio CD in drive.
Found 20 songs on CD, playing time 77:15 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:23:38
Track 3, start time 06:46:39
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TSSTcorp CD-RW TS-H292B on CDR media at speed 32X.

try this...
Thank you for your responses guys!
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes. I can give more info if you need it.

Similar Messages

DB Connector Error : the license key does not include use of OpenSQL driver

Hello,
I am new developer on Crystal Report tool and i face an issue : When I try to refresh data I get the following error message :
DB Connector Error : the license key does not include use of OpenSQL driver.
Does someone know how to get the correct license key ?
Many thanks for your help!
Regards,
Christiane

Hi Christiane,
What version of Crystal Reports are you using?
Who owns the OpenSQL driver?
Thank you
Don

Please help -- weird error-- DVD won't burn.

Hi,
I have a brand new mac pro, and I'm using the most recent version of DVDSP. I get the following error when attempting to burn a Dual Layer DVD when it's in the formating stage: "The recording device reported the illegal request: Unknown device" and it gives me the option to cancel. When I hit cancel I get another error "Formating Failed: THe recording device reported the illegal request: Unknown device error. (0x21, 0x00.)"
Does anyone have any ideas as to what might be the cause of this? I have had other problems with the dvd burner, things like "medium write error" so I've tried using different types of DVDs (I have yet to try Verbatin--which apparently are the ones with the most success).
Any help would be very much appreciated. Do I need to return my mac pro?

I don't have the exact error message with me, but that sounds similar. I bought a new DVR-115 for my Mac Pro and put the existing DVR-112 in the bottom slot. The DVR-115 worked fine for a month or so, then started getting that or a similar error. I replaced it under warranty and soon got the same thing. Then I Googled the error message an found many people having the same problem, even people with PCs. Now I just burn with the DVR-112, not worth resolving. BUT, I could be remembering the error message incorrectly, so Google and see what you get.

Getting (4280) in Windows 7 with a Sony Aw-Q170a Drive?

I finally fixed my burning error in Windows 7 with my Sony Aw-Q170a burner.
After being frustrated with 4280 message after another in iTunes, I tried burning in WMP and it was not finishing there as well.
After hours of searching on the web, I finally found a Firmware update for my drive. Then it all made sense. I had no prior burn errors with iTunes with the same drive in Vista, however Windows 7 and my Sony drive were not playing nice even though the device manager showed no error.
So this fix is for users of
Sony Aw-Q170a
Firmware: 1.72
Solution
Upgrade to Firmware Ver:1.74
Firmware Location:
http://www.opendrivers.com/driver/288727/sony-aw-q170a-(p-ata)-dvd-rw-firmware-1.74-free-download.html
Simply extract the file and launch the firmware update file, and it will verify all the information and ask if you want to flash. Follow all the instructions, (like removing dics, and closing all other programs) and it will ask you to power off.
Once you power cycle, and launch Windows 7 you will notice the OS will re-recognize the drive and say it installed correctly.
Now you can burn cd's again.
To verify simply right click on Computer from the Start menu, then select *Device Manager* on the left side below Control Panel Home.
Expand the *DVD/CD-Rom Drives* listing, and *Right Click* your *Sony Aw-Q170A drive*, then Select Properties.
Click on the Tab to the far right named Details, from the Property drop down list *Select Hardware Ids*.
The Value windows below should list 1.74 after your drive.

Would love to know if this is possible. Found forums dating back years asking exactly the same thing, no solutions. And I do not want to change my headset (Sennheiser MM-50), or use the onboard mic (which sounds like you are using your Mac in a wind tunnel once the fans kick in).

HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.

What is error 4280?? burning cd question

i have been able to burn cd's with itunes up until like 2 days ago...i have updated itunes and my computer and i still cant get anything to burn....at first it would burn but it would take several tries for it to play in my car...it wouldnt read it as an audio cd..now i cant burn anything at all...what is the deal???

i have been able to burn cd's with itunes up until
like 2 days ago...i have updated itunes and my
computer and i still cant get anything to burn....at
first it would burn but it would take several tries
for it to play in my car...it wouldnt read it as an
audio cd..now i cant burn anything at all...what is
the deal???
i ran this and pasted here to maybe help..
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4300
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.5.10),
UpperFilters: cdralw2k (5.3.5.10), pwd_2k (5.3.5.10), GEARAspiWDM (2.0.4.3),
Video Driver: 16MB ATI Rage 128 Ultra\1002-5446-22
IDE\DiskST340016A______________________________3.10___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCDRW/DVD_SM-308B________________T100___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SAMSUNG CDRW/DVD SM-308B, Rev T100
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8.
The drive CDRW speeds are: 2 4 8.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: SAMSUNG CDRW/DVD SM-308B on CDR media at speed 8X.

N900 won't boot, not sure if its charging. HELP

Last night my N900's screen became very very dim, and the brightness would not adjust when i changed it in the setting menu. After a couple hours, if ran out of battery and turned off.
When I got home I set it to charge for about 45 minutes with the wall charger. i held the power button but nothing changed, the light on the side stayed a constant yellow and nothing happens on the screen.
I left it to charge for another 2 hours with the wall charger, when I returned there wasn't even a yellow light which leads me to assume it stopped charging. I unplugged it, plugged it back in and the yellow light appears again.
summary:
My N900 does nothing when i hold the power button.
I have no clue what I can even try. When i plug it into the USB my computer doesn't see it, all I see is a yellow light.

Remove your battery for 30 secs and then replace your battery and try to turn on your device.
(If you have a microSD , remove it)
if it didnt worked, use a new original Nokia battery with your device. (Coz i think your prob is with your battery)
But some people had some probs with their power button. So better to take it to a Nokia care.
"You may loose faith on us.. But never in your selves! From here, the fight will be your own.."
_____________[Protect Transformers]_____________

Finally got itunes updated (after fixing the 2330 error) now my ipad is not showing in itunes...help!

I had registry issues which were not allowing itunes to update. Finally got that fixed and now have the most current version of itunes on my PC. Now a new issue...itunes is not recognizing that the ipad is pulled into the PC. Help!

Hi there,
I have found and linked to a support page which should help you. Take a look.
iPad Assistant - iTunes
Regards,
Nathan

My computer will not identify my external hard drive, help.

I have hard drive from windows 98 connected to my windows 2000 with usb 2.0 to ide adapter. my windows 2000 will not identify external drive.

Let me know who is your Internet Service Provider ... so that i can tell you few manual steps to confiogure the router. ...

Burn error 4280-help toonz? anyone?

I'm getting so fed up with iTunes! I can't get any music onto cds. I am not buying any more from iTunes....but the problem is I still need to get the stuff I've purchased onto a cd...
I cleared up the old 2122 problem by getting a whole new burner....went from an APOEN to a LITE-ON....
now I've got ANOTHER burn failure....this is absolutely ridiculous..it can't all be me can it?
so...I've been getting the burn error 4280 on all burns...no exceptions. And yes, I've followed what everyone has been saying about updating drivers, BIOS etc...I've used different brands of media and it's DMA over PIo
anything else you can think of? here's my diagnostics....
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTEL_ D945GTP_
iTunes 6.0.5.20
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82945G Express Chipset Family\Intel(R) 82945G Express Chipset Family
IDE\DiskWDCWD3200JD-00KLB0____________________08.05J08, Bus Type ATA, Bus Address [1,0]
USBSTOR\DiskMitsumiVT6205-DevB____2.67, Bus Type USB
USBSTOR\DiskMitsumiVT6205-DevM____2.67, Bus Type USB
IDE\CdRomDVD16X_________________________________FTJ1___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomLITE-ONDVDRW_SHM-165H6S________________HS0D___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: LITE-ON DVDRW SHM-165H6S, Rev HS0D
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
E: DVD 16X, Rev FTJ1
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: LITE-ON DVDRW SHM-165H6S on CDR media at speed 16X.
Windows XP Pro
Windows XP Pro

http://docs.info.apple.com/article.html?artnum=300448-Heres a start.
This happens on certain PC's. I dont know if you care to know the ins and outs of why this sometimes happens, but here is why and how to fix it. an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
the thing to do to reclaim your optical drives is located in your registry here:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
You'll want to have that open, and a mini-window of the following:
START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal.
Let me know how it goes.
Good Luck,
Rachyl

Error 4280 while burning cd

When I try to burn a cd, I get the "unkown error" 4280. This error came up after installing itunes 7.6.2.9. With Nero I am able to burn a cd on this computer.
I have seen a lot of messages reporting this error 4280 - but I could not find any solution for me

I was also getting this error message and could not burn to a CD. I finally clicked on the "Safely Remove hardware icon" in the lower right hand corner of the screen in Windows XP. After clicking on the stop and removing the ipod cable, I was able to burn to the CD. Most of the time, I just unplug the usb connector without using the "safely remove hardware" icon. Not sure if this will work for others but worth a try.

Again, issues with burning a cd and receiving error 4280

I've seen and read all of the topics and responses to the error 4280, tried many solutions from the compaq website and apple help site, and so far I havent found a solution. Here are my cd diagnostics...
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
iTunes 4.7.1.30
CD Driver 2.0.4.0
CD Driver DLL 2.0.2.0
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.0),
Video Driver: NVIDIA GeForce4 420 Go 32M GeForce4 420 Go 32M
Check the website of your computer manufacturer or video card vendor to verify that you have the latest video drivers.
IDE\CdRomHL-DT-STRW/DVD_GCC-4241N_______________0C29___, Bus Type ATA, Bus Address [0,0]
Some Dell computers need an update to the ATA bus driver before iTunes recognizes CDs. If you have a Dell computer, check the Dell support website for details.
D: HL-DT-ST RW/DVD GCC-4241N, Rev 0C29
Media in drive is blank.
... Any possible help is greatly appreciated.
compaq presario R3000 Windows XP

If you're burning it as an expanded image then it's probably as Malcolm suggested. The alternative is just to burn it as a data file. Then if it's a 535MB .dmg file it will fit easily onto a 700MB CD. The decompressing will only take place as and when you need it to.

Burning not supported????

My friend's brand new (out of the box 2 days) iMac 1.8 G5 w/Combo fails to burn with error code 0x80020025
stating burning not supported.
any advice would be appreciated.
entering this code in the search box reveals no listing
I have also just noticed that there seems not to be any burning app anywhere
oops never mind this last part I guess burning app is part of Disk utility.

I was able to get good support via chat but I did not have enough blank cds to continue the trouble-shooting
In a new user I can burn from the Finder and itunes and dik utility
but from the main user and a second user
there is no burning from the Finder.
However I have verified that
iTunes can burn audio and data and that DiskUtility can burn an image
...just no Finder burning from admin and other accounts
I will try repairing permissions to see if it resolves this problem.
Good Night to anyone out there

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Error - tag.getAsString : attribute 'title' not found in context ---- Help

hi,
I have included a jsp page in tiles definition xml. if i try to access an attribute defined in the tiles definition using tiles:getAsString method it is throwing the following exception
Error - tag.getAsString : attribute 'title' not found in context
can anyone help me how to get rid of this problem?
Thanks in advance.

yes ,
reference already enter in web.xml
<resource-ref>
          <description>
          </description>
          <res-ref-name>jdbc/iconnectDS</res-ref-name>
          <res-type>javax.sql.DataSource</res-type>
          <res-auth>Container</res-auth>
          <res-sharing-scope>Shareable</res-sharing-scope>
     </resource-ref>
still same problem
pullareddy

Error 4280 - Won't burn, NOT a Sony CD-R Drive - HELP!

Similar Messages

Maybe you are looking for