Error converting .mov to .avi using MPEG Streamclip

Hi folks,
I'm trying to convert an .mov to an .avi for a client using MPEG Streamclip. I have exported a high res master copy of the video from Final Cut (it's a .mov format is Pro Res 422 1920x1080 50i).
So when I bring this file into MPEG Streamclip, I select File > Export to Avi.... and then the following settings:
DivX Codec
Quality 75%
The compression starts and I instantly get the error "Compression Error"
When this started I installed the lastest version of DivX however since I am new to exporting as .avi I am completely lost. I was able to get MPEG Streamclip to export using Apple Cinepak however the quality is awful so I am looking for another solution. I have also tried converting from my highest resolution MPEG-4 export, however I get the same result.
I am thinking that maybe my DivX codec isn't installed, or there is some problem with it? However I thought a new installation of DivX would fix this.
Any help is greatly appreciated! Thanks.

I would suggest exporting three small test files using H264 codec at three different rezolutions.
Play them back and if satisfied send them to your client to evaluate so they can decide what will work for them.
1280x720 H264 files are what we give to our clients these days as "high quality' video.
Smaller files might be recommended for faster download and smoother playback on their system.

Similar Messages

Converting QT to AVI using Mpeg Streamclip

Hello QT People,
Customer needs the finished video in AVI and in a size for web.
I am using MpegStreamclip and wondering what I choose for the compression choices that Streamclip is giving me ? DVC Pro ?
The QT movie is about 8 mins long, (720x480) 16x9 and there is very little movement in it. No quick action just a guy talking and moving slow.
Thanks,
Al
Message was edited by: UCanCallMeAl

Bought the flip for mac plug in. There are a lot of options for diff bit rates. Should I choose constant CBR or variable VBR and when I watch the export using QT it is giving me a data rate (in the show info window) that is meaningless to me.
Some background information to consider:
1) The target bit rate always varies to some degree depending on the graphic complexity of the source content.
2) Constant Bit Rate (CBR) encoding provides a more or less constant data rate at the expense of varying the quality dependent on the instantaneous graphic complexity of the source file. (Think of it as having a constant data rate with variable quality.)
3) Variable Bit Rate (VBR) encoding varies the data rate in an attempt to keep the quality more or less constant. (Think of it as having a variable data rate with constant quality.)
4) Fast start or streaming content always plays most smoothly if the playback data rate is kept lower than the target user's ISP average connection speed.
Since you did not indicate which version of Flip4Mac you purchases, I don't know if you have the option to actually set multi-pass average and peak bit rate targets. If not, then you must use the Quality slider to "guesstimate" single pass video data rates whether creating CBR or VBR conversions. (In this case for a 320x240 target resolution, you may want to try something like a quality setting of 25 and go up or down depending on the results for your particular source file. Be advised that when you test the file for playback, you will likely see two different data rates in the "Inspector" window. The first (lower reading) is for the raw cacheing WMV data which is partially decompresses as it is cached. When finished cacheing, the number will likely double in size as it switches to monitoring the partially decompressed data actually used by the QT player. As I did not know if your client's 550 (450 + 100) Kbps bit rate target was for the WMV content or the cached content, I suggested the initial 25 quality rating as a good starting point for your own preliminary output testing.
As to audio bit rate targets, it is more common on the mac to use CBR encoding for which the Flip4Mac codec has a 96 Kbps @ 44.1 KHz pop-up option that most closes your client's target.
I assume this should be enough information to get you started...

HD MOVs converted to HD AVIs via mpeg streamclips not pc compatible?

This is driving me crazy. You'd think it was the most basic thing but I can't get any info on why the HD AVIs created via Mpeg Streamclip will not play on my clients PC. He has the appropriate codex but the things won't play at all. The same HD MOVs i'm trying to convert to HD AVI play fine on his PC when I convert using Quicktime Pro but I can only get SD resolution on my created AVIs using quicktime. If anyone can tell me what is the best way to convert a HD MOV to a pc compatible HD AVI format that would be a wonderful thing. Please help
thanks

What codec are these MOVs in originally? If it is DVCPRO HD then as far as I know the only computers that have that codec on it are ones with FCP installed on them. Does your final file have to be an AVI or can it be something else?

Rendering while converting from DVD using MPEG Streamclip or Cinematize

Is there anyway to make rendered .mov file, while converting from DVD to .mov, using MPEG Streamclip or Cinematize for final cut pro?
Thanks.

Are you asking if there's a way to export from mpegstreamclip so you don't need to render when you edit with the file in fcp? If so, yes... (sorry couldn't resist).
What format is your sequence in fcp (make the timeline active and hit command(apple)-zero? Note the pixel dimensions, frame rate and compressor settings and set the quicktime options in mpegstreamclip export dialog to match them. You should be good to go.
Also, you might do some searching here. Pretty sure someone posted a link to a tutorial on how to do this,

Using MPEG Streamclip to convert files for EX-1 sequence

I am trying to use MPEG Streamclip to convert mp4 and mpeg files in order to edit them in the same sequence as my EX-1 footage. What settings should I use on MPEG Streamclip that would be most appropriate for seamlessly editing the former MPEG and mp4 files with the EX-1 footage? Any thoughts on what sequence settings I should use? Right now I have it set as "XDCam Ex 1080p24 VBR" but every time I bring in files I have tried to convert using MPEG Streamclip, they need to render and I'm trying to avoid that. Thanks!

Thanks for the help

Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix these?

Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix this?

This is the clip:
This is the sequence:
I know they both should match. Question is, should I re convert the clips in mpeg using different size settings? Or should I change the sequence settings? how?
Thanks A LOT.

Can't Convert Mov to AVI in QTPro

Does anyone know if Apple has some kind of code in their movies that would not allow you to convert a .mov file of the new iPhone features movie found on the Apple homepage to another format? My Treo software doesn't play .mov files (yeah yeah... I know... get an iPhone, can't get out of my Verizon contract:) Thanks.

Use MPEG Streamclip. It is free. 3GP format is usually for phones so you may want to try that, admittedly pretty tiny blocky video. MPEG Streamclip does export to AVI though you need to know what codec the Treo supports. The is because AVI is not a codec it is a container like MOV and can have any combo of video and audio in it. You can have an AVI with a clip with WMV video and MP3 audio or H264 video and AAC audio and the possibilities are endless.

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

Process for exporting in FCPX and then using MPEG Streamclip to downgrade?

I have footage shot with a 5Diii, and it is set at 1920x1080, 23.98p.
When I export through FCPX at H.264, it gives me a beautiful master file, but is larger than the 4GB that I need.
What is the process for using MPEG Streamclip to get a smaller file?
Do I export a master file in FCPX first using a different codec, and then use MPEG Streamclip to compress it? If so, what would be the best setting to export from FCPX, and then what would be the best setting to compress at in MPEG streamclip?
My goal is to be as close to 1080HD as possible.

Here is the background story....... I provide movie files on a DVD delivery (files in SD quality) and then also give a copy of the same films on a flash drive so clients can have it in HD quality, and plug the flash drive directly into the TV.
This always worked fine in the past until I ran into a movie file that is 4.7GB, and would not copy onto the flash drive, since flash drives only accept files up to 4GB.
So I tried reformating the flashdrive to exFAT. It allowed me to copy the 4.7GB on the flashdrive, but when I tried plugging it in directly to the TV, the TV did not recognize the drive. (I learned that exFAT is not always compatable with all TVs.)
My other option would be to download an app to let me reformat the drive into NTFS which accepts files bigger than 4GB, and supposedly works better with TVs. I haven't tried this yet because I am worried that downloading that app might mess up my computer. ???????
So....I have come to the conclusion that the only other thing I can do is compress the 4.7GB file to be 4GB (or less) so it will fit on the flash drive which I believe had an original format was MS-DOS FAT.
Are you suggesting instead of exporting the file from FCPX in H264, I should do it in ProRes? The file will be much larger than 4GB, but, then I can compress it, without losing as much of the quality as I would if I compressed an H264 file? Either way it needs to be 4GB or less, so I don't know if that defeats the purpose of using a ProRes file to begin with.
Thank you so much for helping with this!

Have problem to convert MOV to AVI in QuickTime Pro 6.1

Have problem to convert MOV to AVI in QuickTime Pro 6.1 - I tried export (convert) MOV(18MB) to AVI format, and got just 253KB AVI file in output. I even can no play it. What is wrong? What Export options(quality) should be selected? I used default (medium), should I use 'high' or 'best'?

I am assuming you already are able to open the movie
in QT Player. Use Export in the File menu, choose
Movie to Avi in the drop-down Export Menu and then
click on Options to choose one of the pre-loaded avi
codecs for the compression. You may also want to
search for and install one of the newer codecs, such
as 3ivx or divx since the preinstalled codecs are all
rather old.
eMac 700
mhz Mac OS 9.2.x
Thanks for the help. It worked, but the quality of the video is poor. Is there anything I can do about this?

Converting to MP4 using MPEG Streamclip

Hi,
I did post this in another topic, then realised I probaby should start a new one.
I am new so please be nice - and I'm not superwhiz with these things...
I am in the process of using the recommended MPEG Streamclip 1.2 (for Windows) to convert my .VOB file to MP4 so that I can play it on my ipod. The file is approx 500MB, and I think I may have selected wrong options as it has taken over 12 hours to convert 65% of the file... and it's still going (obviously :-))
I can't do a screen print of the settings I've used because it's still going... but the link should show you them basically, the differences are as follows:
Button says iTunes not iPod
Limit Data Rate 1.5 mbps
Framesize Other 640 * 480
Interlaced Scaling not checked
http://forum.videohelp.com/topic320388.html
So my questions are:
1. Is it normal for conversion to take this long?
2. Are the settings I chose correct?
Thanks in advance!
*Please note I asked here not on the MPEG Streamclip forums just because you guys recommended it so you obviously have some experience using it.*

There are presets for the iPod and Apple TV-they are located under file->export to mpeg-4. Once the window pops up hit the iTunes button. You get a popup window with a long list of options.
The quickest setting would be 3gp-172 by something(the very last one).
It is designed to stream to the iPhone over the 3g network.
PS.
You can lower the bitrate to speed things up slightly, but using a p4 like yours will take for ever.
Message was edited by: Johnathan Burger

Using MPEG streamclip to convert VIDEO_TS files (DVDs) with chapters

I am using MPEG Steamclip to convert DVDs (ie VIDEO_TS files).
Where the DVD has no chapters then it converts in one go into a new file.
However where the DVD has some chapters, it gives me an option to convert each chapter individually. I actually just want to convert the whole DVD in one go, with all the chapters merged together - is there any way to do this?
Thank you

Thanks for the help

Can't convert MOV to AVI - turns black

hi all,
i've converted thousands of files to AVI from MOV's....suddenly, when i convert them, they turn black
i ususally convert from Uncompressed MOV to Uncompressed (using NONE codec) AVI and no problems.
but now, the file just turns black
help/????
i also have Perian, and have enabled/disabled, but no luck

Use MPEG Streamclip. It is free. 3GP format is usually for phones so you may want to try that, admittedly pretty tiny blocky video. MPEG Streamclip does export to AVI though you need to know what codec the Treo supports. The is because AVI is not a codec it is a container like MOV and can have any combo of video and audio in it. You can have an AVI with a clip with WMV video and MP3 audio or H264 video and AAC audio and the possibilities are endless.

MPEG1-DV conversion using MPEG Streamclip. Help!

I am having problems converting an mpeg1 movie clip for editing in iMovie.
I recently recorded a concert on my Sony DCR-HC40 camcorder. The majority of the concert was captured to cassette in DV-PAL format (720 x 576, stereo, 48 kHz at 25 FPS).
However, the final third of the concert was captured on the camera's MemoryStick Duo in MPEG1 muxed format (320 x 320 at 25 FPS). The clip is 84 Mb in size.
I want to convert the mpeg clip into the same format at the cassette footage so that I can seamlessly splice the two sets of footage in iMovieHD with as little depreciation in quality of image and sound as possible.
So far I have simply used the 'export to DV' command from the File menu in MPEG Streamclip. But this produces a noticeably crackly-sounding depreciation in sound quality and no improvement in image quality - rather the reverse infact, since when viewed in the larger Quicktime window, the clip shows up the poorer resolution of the original clip.
What do I need to do to get the original mpeg clip to as near a quality as the cassette footage, for editing and burning onto DVD for display on a TV?
Any guidance would be much appreciated.
BTW, I am running Tiger 10.4.3 on a Pb G4 (QuickTime 7.0.3/iMovie 5.0.2)
PowerBook G4 17 1.5 ghz 512 MB Ram Mac OS X (10.4.3)

mpeg1 footage is only fit for showing on screens no larger than an iPod photo or mobile device?
MPEG1 is usually encoded with low resolution and rather low bitrates so the quality is often rather poor.
However, MPEG1 CAN be encoded with DVD-like resolutions and bitrates so the quality CAN be quite good (MPEG1 doesn't support interlacing like MPEG2, though).
It would be a shame to lose the footage as it was part of a concert of Handel's Messiah.
One option could be to do minimal edits to the MPEG1 with MPEG editors like MPEG Streamclip and burn it as a VCD or DVD (they both CAN have the same video although DVDs rarely use it). Then you'd preserve ALL video quality there is.
...but this won't work with your 320x240 video because the VCD/DVD compatible resolution is PAL 352x288 or NTSC 352x240. So you'd need to re-compress even your 320x240 MPEG which degrades quality.
So your best quality option is to watch the MPEG1 on a computer monitor via MPEG Streamclip, QT Player or some other viewer.
Or, you can convert to DV and blend it with the high quality DV tape material. Converting MPEG to DV should not much or at all degrade quality because DV is a much higher quality codec than your MPEG1 source.
Bit Rate: 0.73 Mbps
Duration: 0:16:16
Data Size: 84.79 MB
That's quite low. A DVD uses about 4-6-8 Mb/s and a low quality low res VCD uses 1.1 Mb/s. So your MPEG1 quality can't be very good to begin with.
Audio Tracks:
192 MP2 mono, 32 kHz, 32 kbps
That's very low, too. Even a low quality MP2 often uses 192 kb/s. And the 32 kHz must be resampled to 48 kHz for DV or DVD use.
when played, either via streamclip before conversion, or in QT (I don't have QTPro) after conversion to DV, distorts at quite low levels in a way that a QT movie from cassette does not.
I'm afraid that there is not much you can do if you hear the distortion even BEFORE any conversions. Some dedicated audio processing app might soften the distortion but I wouldn't count on that.
FWIW, you might try to convert using the "Low Level" audio. From the MPEG Streamclip guide:
"For MPEG audio tracks (MP1, MP2) two different audio levels are available for playback and conversion to MOV, DV, AVI, MP4 and AIFF: "High Level" and "Low Level". You can choose one of these two levels using the "Audio Mode" pop-up menu. The default level is "High Level". Use "Low Level" if, and only if, the converted movie or AIFF file shows an excess of volume."
you also mention that re-compressing with iDVD will further degrade quality. Is this true of both types of footage (mpeg->DV & DV cassette)?
MPEG2 compression used in video-DVDs will ALWAYS degrade quality. High quality material (such as DV) tolerates this better so you might not even notice it. So you should use high bitrates if you want to convert and burn the low quality MPEG1-converted-to-DV material as a DVD (with iDVD use Best Performance or don't exceed ~70 minutes with Best Quality).
would I need to get Roxio Toast? What is the difference between this and IDVD?
Toast 7 can be forced to burn non-valid DVD resolutions as a video-DVD (MPEG Streamclip can be used to prepare the MPEGs) with no re-converting or quality loss but those DVDs are not guaranteed to work on standalone DVD players so I'd not use that route.
Basically, what I'd like to acheive is a nicely-edited home movie with titles etc, to put onto DVD & VHS, of a 2.5 hour classical concert, in as good a quality, audio/visually as I can, from the two types of footage, spliced as cleanly as possible. The footage is continuous, but the media changes from cassette to mpeg at a certain point.
Don't exceed ~70-75 minutes with iDVD because after this the quality starts to drop. Toast 7 can burn somewhat longer high quality DVDs than iDVD because it uses compressed AC3 audio so it doesn't "steal" bandwidth from video as iDVD does with its uncompressed PCM audio. But compressing that low quality audio might not be a good idea either!

Using MPEG Streamclip for Mac. Help me if you can

Hi, I've found out about MPEG Streamclip in Apple Discussions.
I opened Streamclip for the first time and converted an .mpg file to .mov file by clicking File>Export to Quicktime. It successfully converted quickly and I opened it w/ Quicktime and was satisfied to open its properties and see two individual tracks for visual and audio. This should convert to iPod video format w/ sound, correct? What bugs me is the fact that the file size multiplied by 4, or went from 256MB to 1GB.
I would like to know the perfect exporting settings for good iPod quality (sound and visual) and reasonable size. What scares me is that if and when this newly 1GB file is converted to iPod, it'll be even larger, since a previously successfully converted movie went from 3.5MB to 5.1MB.
I'd like to know your experiences of using Streamclip. Should I experiment? What setting did you use to get the mpeg files to .mov files with smallest size and equivalent quality? Any reply is appreciated, and ones that answer my questions shall be favoured.
thnx for your time

In a nutshell, YES you should experiment. You should also try iSquint incidentally.
However, MPEG Streamclip 1.5.1 has an iPod button if you do File -> Export to MPEG4. Clicking that button sets the parameters to equal what the iPod would need to display without having to convert to a QuickTime movie first. Do one both ways to see if QuickTime and MPEG Streamclip's output looks identical (I've found QuickTime does a better job on animation).

Error converting .mov to .avi using MPEG Streamclip

Similar Messages

Maybe you are looking for