Error during date comparing
Hi , i have situation , where i have to find a date between two dates
i used below filter condition, but i get error
(TO_DATE(PLAYER_MONTHLY_SUMMARY.CURRENT_MONTH, 'DD-MON-YYYY') BETWEEN
TO_DATE('01-MAR-2012', 'DD-MON-YYYY') AND
TO_DATE('31-MAR-2012', 'DD-MON-YYYY')
Error :-
ORA-12801: error signaled in parallel query server P000
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-02063: preceding 2 lines from EDW_REP_DBLINK
12801. 00000 - "error signaled in parallel query server %s"
*Cause: A parallel query server reached an exception condition.
*Action: Check the following error message for the cause, and consult
your error manual for the appropriate action.
*Comment: This error can be turned off with event 10397, in which
case the server's actual error is signaled instead.
is their any error in code or this error is db level
Hi,
916710 wrote:
hi ,
here are the details
CURRENT_MONTH is date datatype in PLAYER_MONTHLY_SUMMARY table TO_DATE, as the name implies, converts something TO a DATE . If current_month is already a DATE, you don't need to convert it to a date.
Besides, the 1st argument to TO_DATE is supposed to be a VARCHAR2. Don't use a DATE where a VARCHAR2 is expected.
and date range is from next_run_date where my next_strt_date and next_end_date both are date datatype
instead of this below query
(TO_DATE(PLAYER_MONTHLY_SUMMARY.CURRENT_MONTH, 'DD-MON-YYYY') BETWEEN
TO_DATE('01-MAR-2012', 'DD-MON-YYYY') AND
TO_DATE('31-MAR-2012', 'DD-MON-YYYY')
if i try below one then it worked
PLAYER_MONTHLY_SUMMARY.CURRENT_MONTH BETWEEN
TO_DATE('01-MAR-2012', 'DD-MON-YYYY') AND
TO_DATE('31-MAR-2012', 'DD-MON-YYYY')
is this approach is rightYes, that's comparing a DATE (current_month) to other DATEs (the results of TO_DATE).
Remember that all DATEs in Oracle include hours, minutes and seconds. If the hours, minutes and seconds of current_month are always 00:00:00 (for example, if current_month is always populated with TRUNC (some_date, 'MONTH')) then the comparison above is okay. But if current_month can be something like 6:52;31 on March 31, 2012, then it will fail the condition, becuase the upper end of the range is
TO_DATE('31-MAR-2012', 'DD-MON-YYYY') which is 00:00:00 on March 31, 2012. To include current_month that is any time of day on March 31, you'd have to do something slightly diferent, such as
PLAYER_MONTHLY_SUMMARY.CURRENT_MONTH BETWEEN TO_DATE ( '01-MAR-2012' -- Default time, 00:00:00, is okay here
, 'DD-MON-YYYY'
AND TO_DATE ( '31-MAR-2012 23:59:59'
, 'DD-MON-YYYY hh24:mi:ss'
) or
PLAYER_MONTHLY_SUMMARY.CURRENT_MONTH >= TO_DATE ( '01-MAR-2012', 'DD-MON-YYYY')
AND PLAYER_MONTHLY_SUMMARY.CURRENT_MONTH < TO_DATE ( '31-MAR-2012', 'DD-MON-YYYY') + 1
Similar Messages
-
Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required
Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!error is clear, check your abap code.
-
Error during date calculation: Time entered not numerical
Hi All,
We are using SAP MI 7.0 SP18 Server and Client
xMAM 3.0 SR06
Now when we create a Notification using the link Notification Management of type PV and SAVE.
When Synchronized, it is completed but backend no notification is trigerring and when checked in Error Logs
the following message is shown Error during date calculation: Time entered not numerical
Kindly Suggest
Regards,
Kiran JoshuaHi All,
I got to know how to edit the entries from merep_mon : Thanks to Chinna.
But unfortunately that did not solve my problem
I had to debug the function module of the respective SyncBO and found that the Profile type was not maintained in the backend.
Infact the error "Error during date calculation: Time entered not numerical" was misleading.
Anyways upon customising the Profile for the PJ and PV type Notifications that solved my issue.
Regards,
Kiran Joshua -
Hello,
I try to load Arccrual Engine Costing Results from DSO (0ACE_DS01) to Leasing Accounting Key Figures DSO (0FIL_DS04) but during the data processing I get Error 2 in update:
Cannot determine fiscal year/period for date 99993112 and variant.
Errorcode: RS_BCT_CRM_FIN006
Could somebody help? Thanx in advanceHello Prakasubw,
yes this could be the error. in infopackage i enter for the fiel datefrom: 01012005
and in field dateto: 31129999
, because in the infopackage the fields show lenght 8!!!
what do you think should I enter in these fields in the infopackage:
datefrom:
dateto:
Thanx in advance!
may I can you send a screenshot with the error and the infopackage selection?
Message was edited by:
Rusty -
Hi,
Our end users are preparing their scripts for UAT and I have been asked to provide a list of data errors which they might need to test during UAT.
Can someone please help me in this. This is very urgent!!!
Thanks,
RPK.
Message was edited by:
RPKHI,
1.No IDocs could be sent to the SAP BW using RFC.
2.IDocs were found in the ALE inbox for Source System that are not
Updated. Processing is overdue
5.1st That it is a PC File Source System.
2nd - That there are Duplicate Data Records leading to error.
7.1st That it is a PC File Source System.
2nd For uploading data from the PC File it seems that the file was not kept at the application server & the job was scheduled in Background
8.The background processing was not finished in the source system.
It is possible that the background processing in the source system was terminated.System response .There are incomplete data packets present
9.After looking at all the above error messages we find that if we want to load data with the delta update you must first initialize the delta process.
10.Here we can see that the Activation of ODS has failed as the Request Status in the ODS may not be green.
13.While Fiscal year is mostly the financial year and varies depending upon the Client using which Fiscal year Variant. Client may consider April is the start month of year (financial) .So this can be achieved by defining the fiscal year.One client can have different fiscal year definations with different Fiscal varients.So Fiscal variants differ the starting and ending of fiscal year.
For example in India we follow Fiscal year from April to March. You can have a look at the Fiscal year Variant and the periods in transaction OB29
14.Due to space problem these types of errors occurs -
Error during data load due to special characters in source data
Hi Experts,
We are trying to load Billing data into the BW using the billing item datasource. It seems that there are some special characters in the source data. When the record with these characters is encountered, the request turns red and the package is not loaded even into the PSA. The error we get in the monitor is something like
'RECORD 5028: Contents from field **** cannot be converted into type CURR',
where the field **** is a key figure of type currency. We managed to identify the said record in RSA3 on the source system and found that one of the fields contains some invalid (special) characters that show up as squares in RSA3. The data in the rest of the fields, including the fields mentioned in the error looks correct.
Our source system is a non-unicode system wheras the BW system is unicode enabled. I figure that the data in the rest of the fields are getting misaligned due to the presence of the invalid characters in the above field. This was confirmed when we unassigned the field with the special characters from the transfer rules and removed the source field from the transfer structure. After doing this the data was loaded successfully and the request turned green.
Can anyone suggest a way to either filter out such invalid characters from the source data or make some settings in the BW systems such that the special characters are no longer invalid in the BW system? We cannot write code in the transfer rules because the data package does not even come into the PSA. Is there any other method to solve this problem?
Regards,
TedHi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia -
Hi All,
I got this error in atg bcc on UI and console as well when i doing full deployment.
I triyed through snap-shot id but i think this is different issue.
So please tell me where is problem happend.
Thanks in Advance.
--Kakasaheb.Are you working with a customer with a support contract?
Cause
One potential cause is corrupted data in the epub_file_folder table in the versioned schema and examining the table contents is necessary. This data may be the result of a deployment containing VFS assets that did not complete successfully
The BCC application assumes that the virtual folder structure contained in epub_file_folder is built upon a single root folder. This folder has the name 'root' and has a NULL parent_folder. If another folder in this table has a NULL parent_folder, then the application does not know which is the true root folder. As a result, based purely on chance, the BCC will choose one of them as the root folder of the VersionFileStore (VFS). Depending on which assets are contained beneath that folder, some file assets may not appear correctly in the BCC UI. Another symptom is the inability to deploy any project, including a full deployment.
To check for this particular corruption, perform the following SQL query.
select * from epub_file_folder order by parent_folder;
Putting the table data in a spreadsheet makes it easier to sort the data on various columns for analysis.
If you sort by parent_folder check for data similar to that shown in the following table. Note that there are two folders whose parent_folder is NULL. Here are the relevant columns from epub_file_folder:
folder_id
folder_name
parent_folder
asset_version
is_head
version_deleted
version_editable
ff102063
CorruptFolder
NULL
1
1
0
0
root
root
NULL
1
1
0
0
Solution
Note: Exercise caution when directly modifying the versioned database schema. For assistance identifying this problem and implementing the solution, please open an SR with Oracle Support.
1. Analyze Versioned Folder Data
How you resolve this corruption will depend on whether or not you need to retain the corrupt folder. Examine whether the folder has an asset version that is checked in, marked as deleted, or marked as the head version. If there is no checked-in version with is_head=true, then this indicates the folder may have been part of a failed deployment.
Trace through the hierarchy of folders underneath the corrupt folder. Determine whether there are any folders or files within that hierarchy that you need to retain. In some cases, it may be a single folder created unintentionally by a BCC user. In other cases, there may be more significant folder structure underneath it that is needed by the front-end application.
2a. Corrupt Folder Not Needed
If you do not need the corrupt folder, set its version_deleted=1.
This will mark the folder as Deleted in the versioned repository. As far as the BCC is concerned, neither it nor anything under it will exist and will not appear in the BCC UI. The data will still be retained in the database, though.
2b. Corrupt Folder Needs Correct Parent
If you do need the corrupt folder, determine the true parent folder. Set its parent_folder to the ID of the actual parent.
See the folder_id column for the correct parent folder and substitute that ID for NULL in BadFolder's parent_folder.
3. Restart BCC and Re-Test
After modifying the data for the corrupt folder, restart the BCC so that the repository picks up all the changes.
++++
Thanks
Gareth
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates. -
Error during data pump import with SQL developer
Hello,
I try to trasnfer data from one database to another one through data pump via SQL Developper (data amount is quite important) exporting several tables.
Tables export is doing fine, but I encounter the following error when I import the file (I try data only and data + DDL).
"Exception: ORA-39001: argument value invalid dbms_datapump.get_status(64...=
ORA-39001: argument value invalid
ORA-39000: ....
ORA-31619: ...
The file is in the right place, data pump folder of the new database. User is the same on both base, database version are similar.
Do you have any idea of the problem ?
ThanksWith query SELECT * FROM v$version;
Environment source
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Environment target
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production -
Segmentation fault error during data load in parallel with multiple rules
Hi,
I'm trying to do sql data load in parallel with multiple rules (4 or 5 rules, maybe), i'm getting a "segmentation fault" error. I tested 3 rules file and it worked fine. we're using Essbase system 9.3.2., with UDB (v8) as the sql data source. ODBC driver is DataDirect 5.2 DB2 Wire Protocol Driver (ARdb222). Please let me know if you have any information on this.
thx.
YHi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia -
Maxl Error during data load - file size limit?
<p>Does anyone know if there is a file size limit while importingdata into an ASO cube via Maxl. I have tried to execute:</p><p> </p><p>Import Database TST_ASO.J_ASO_DB data</p><p>using server test data file '/XX/xXX/XXX.txt'</p><p>using server rules_file '/XXX/XXX/XXX.rul'</p><p>to load_buffer with buffer_id 1</p><p>on error write to '/XXX.log';</p><p> </p><p>It errors out after about 10 minutes and gives "unexpectedEssbase error 1130610' The file is about 1.5 gigs of data. The filelocation is right. I have tried the same code with a smaller fileand it works. Do I need to increase my cache or anything? I alsogot "DATAERRORLIMIT' reached and I can not find the log filefor this...? Thanks!</p>
Have you looked in the data error log to see what kind of errors you are getting. The odds are high that you are trying to load data into calculated memebers (or upper level memebers) resulting in errors. It is most likely the former. <BR><BR>you specify the error file with the <BR><BR>on error write to '/XXX.log'; <BR><BR>statement. Have you looked for this file to find why you are getting errors? Do yourself a favor, load the smaller file and look for the error file to see what kind of an error you are getting. It is possible that you error file is larger than your load file, since multiple errors on a single load item may result in a restatement of the entire load line for each error.<BR><BR>This is a starting point for your exploration into the problem. <BR><BR>DATAERRORLIMIT is set at the config file, default at 1000, max at 65000.<BR><BR>NOMSGLOGGINGONDATAERRORLIMIT if set to true, just stops logging and continues the load when the data error limit is reached. I'd advise using this only in atest environement since it doesn't solve the initial problem of data errors.<BR><BR>Probably what you'll have to do is ignore some of the columns in the data load that load into calculated fields. If you have some upper level memebers, you could put them in skip loading condition. <BR><BR>let us know what works for you.
-
Facing TIME OUT error during data load extraction
The program "SAPLSENA" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Can someone help me with the solution please?Hi Sai,
IT looks like you are running the program in foreground and execution takes more time than the value specified under profile parameter rdisp/max_wprun_time.
Check whether you can execute the same in background.
If not then increase the value of parameter rdisp/max_wprun_time . Take SAP restart and test again.
Hope this helps.
Regards,
Deepak Kori -
Conntrans -- Errors during "Receive" phase
Hi,
I'm trying to run the conntrans on one of the mobile clients for the first time. I see that there are entries in the in outbound queue of the mobile site(checked on CRM server). I get an error during the receive phase saying "Error during data receive; ensure network connectivity, if problem persists, contact system admin"
I'm able to connect to Comm. station successfully from the same mobile client.
I checked the log file "DotnetQmtClient.log" (this file is present in the directory mentioned in the registry key HKEY_LOCAL_MACHINE\SOFTWARE\SAP\MSA\MW\TL\TL_TRACE_DIR), and found this information
14.02.2008 06:46:09 : Start of DotNetQmtClient Log
14.02.2008 06:46:09 : Successfully opened connection to database
14.02.2008 06:46:14 : Opening database connection
14.02.2008 06:46:14 : PushFirstTime ('CRM_SITE_000000000000002', '', '0', 3)
14.02.2008 06:46:14 : GetMessageCountToSend : Found 0 message to send.
14.02.2008 06:46:14 : PullFirstTime (CRM_SITE_000000000000002, )
14.02.2008 06:46:14 : ConfirmMessageRecvd ()
14.02.2008 06:46:14 : No messages to be Confirmed !
14.02.2008 06:46:14 : NextNumMessage Registry : <Object reference not set to an instance of an object.>
14.02.2008 06:46:14 : Next Pull: msg_count = <20> msg_size = <0>
14.02.2008 06:46:18 : ReceiveNext Failed; Trying to pull single message
14.02.2008 06:46:18 : Next Pull: msg_count = <1> msg_size = <0>
14.02.2008 06:46:19 : ReceiveNext Failed even with single message
Error In TransferPullMessage() : Error in RecieveNext : Call to R/3 Server failed : An error occurred when receiving a complex parameter.
14.02.2008 06:46:19 : Finally ()
14.02.2008 06:46:19 : Configuration values :-
LogFilePath = <D:\DOCUME1\<usrlogin>\LOCALS1\Temp\DotNetQmtClient.log>
QmtServerPC = <commstation server name>
sPushQueueName = <CRM_SITE_000000000000002>
sPushQueueDest = <>
iPushNoConfirm = <0>
iPushPendingConfRetryAttempts = <3>
sNewQmtTraceFile = <D:\DOCUME1\<usrlogin>\LOCALS1\Temp\TransferService.log>
iNewQmtTraceLevel = <2>
sTLTraceDir = <D:\DOCUME1\<usrlogin>\LOCALS1\Temp\>
sTLTraceLevel = <0>
Can anyone let me know how to resolve this issue.
Regards,
PraveenHi Ankan,
Thanks for the note. Even after implementing it, I was still facing the same issue, with error "Error in RecieveNext : Call to R/3 Server failed : An error occurred when receiving a complex parameter."
Later I implemented another note 1028225(recently updated), which resolved my issue.
Thanks a ton.
Regards,
Praveen -
Error with data source creation
Error during Data Source creation: weblogic.common.ResourceException: DataSource
(jdbc.GangsterDB) can't be created with non-existent Pool (connection or multi)
(oraclePool)
I have already created oraclePool with the following properties:
Name : oraclePool
URL : jdbc:weblogic:oracle
Driver: weblogic.jdbc.oci.Driver
Properties:
user=system
server=myserver
In weblogic-ejb-jar.xml file:
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/GangsterDataSource</res-ref-name>
<jndi-name>jdbc.GangsterDB</jndi-name>
</resource-description>
</reference-descriptor>
In ejb-jar.xml file:
<resource-ref>
<res-ref-name>jdbc/GangsterDataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
Do I need to make changes in my Entity Bean files? I have made a datasource called
GangsterDB. I do not know the reason for this error. Please do let me know.
Error during Data Source creation: weblogic.common.ResourceException: DataSource
(jdbc.GangsterDB) can't be created with non-existent Pool (connection or multi)
(oraclePool)
Thank you
Ronak ParekhI am still getting the same error:
Unable to deploy EJB: OrganizationEJB from sempire_bc.jar
The DataSource with the JNDI name: OrganizationDB can not be located. Please ensure
that the DataSource has been deployed
successfully and that the JNDI name in your EJB Deployment descriptor is correct.
In my console, I have created a connection pool 'oraclePool' and 3 datasource
'jdbc.GangsterDB', 'jdbc.OrganizationDB' and
'jdbc.JobDB'. I have also specified the target server and there seems to be no
error. I have checked 'Monitor All Connection
Pools' and oraclePool is running. I still do not understand the problem that I
am getting and have no clue how to solve it.
Thank you
Ronak Parekh
My weblogic-ejb-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>GangsterEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-type>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-type>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/oraclePool</res-ref-name>
<jndi-name>jdbc.GangsterDB</jndi-name>
</resource-description>
</reference-descriptor>
<local-jndi-name>jdbc.GangsterDB</local-jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>OrganizationEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-type>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-type>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/oraclePool</res-ref-name>
<jndi-name>jdbc.OrganizationDB</jndi-name>
</resource-description>
</reference-descriptor>
<local-jndi-name>jdbc.OrganizationDB</local-jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>JobEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-type>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-type>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/oraclePool</res-ref-name>
<jndi-name>jdbc.JobDB</jndi-name>
</resource-description>
</reference-descriptor>
<local-jndi-name>jdbc.JobDB</local-jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
My ejb-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC
"-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<display-name>Business Component CMP 2.0</display-name>
<enterprise-beans>
<entity>
<display-name>Gangster Entity Bean</display-name>
<ejb-name>GangsterEJB</ejb-name>
<local-home>com.sempire.builder.business_component.GangsterHome</local-home>
<local>com.sempire.builder.business_component.Gangster</local>
<ejb-class>com.sempire.builder.business_component.GangsterBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>GangsterEJB</abstract-schema-name>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>nickname</field-name></cmp-field>
<cmp-field><field-name>badness</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<resource-ref>
<res-ref-name>jdbc/oraclePool</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) FROM GangsterEJB AS a]]>
</ejb-ql>
</query>
</entity>
<entity>
<display-name>Organization Entity Bean</display-name>
<ejb-name>OrganizationEJB</ejb-name>
<local-home>com.sempire.builder.business_component.OrganizationHome</local-home>
<local>com.sempire.builder.business_component.Organization</local>
<ejb-class>com.sempire.builder.business_component.OrganizationBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>OrganizationEJB</abstract-schema-name>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>description</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<resource-ref>
<res-ref-name>jdbc/oraclePool</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) FROM OrganizationEJB AS a]]>
</ejb-ql>
</query>
</entity>
<entity>
<display-name>Job Entity Bean</display-name>
<ejb-name>JobEJB</ejb-name>
<local-home>com.sempire.builder.business_component.JobHome</local-home>
<local>com.sempire.builder.business_component.Job</local>
<ejb-class>com.sempire.builder.business_component.JobBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>JobEJB</abstract-schema-name>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>score</field-name></cmp-field>
<cmp-field><field-name>setupCost</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<resource-ref>
<res-ref-name>jdbc/oraclePool</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) FROM JobEJB AS a]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
<relationships>
<ejb-relation>
<ejb-relation-name>organization-memberGangsters</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>organization---memberGangsters</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>OrganizationEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>memberGangsters</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>memberGangsters---organization</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<cascade-delete/>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>organization</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>gangsters-jobs</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>gangsters---jobs</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>jobs</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>jobs---gangsters</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<relationship-role-source>
<ejb-name>JobEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>gangsters</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>organization-theBoss</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>organization---theBoss</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>OrganizationEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>theBoss</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>theBoss---organization</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
</ejb-relationship-role>
</ejb-relation>
</relationships>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>GangsterEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>OrganizationEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>JobEJB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
My weblogic-cmp-rdbms-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-rdbms-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB RDBMS Persistence//EN'
'http://www.bea.com/servers/wls600/dtd/weblogic-rdbms20-persistence-600.dtd'>
<weblogic-rdbms-jar>
<weblogic-rdbms-bean>
<ejb-name>GangsterEJB</ejb-name>
<data-source-name>GangsterDB</data-source-name>
<table-name>GANGSTER</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>nickname</cmp-field>
<dbms-column>NICKNAME</dbms-column>
</field-map>
<field-map>
<cmp-field>badness</cmp-field>
<dbms-column>BADNESS</dbms-column>
</field-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>OrganizationEJB</ejb-name>
<data-source-name>OrganizationDB</data-source-name>
<table-name>ORGANIZATION</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>description</cmp-field>
<dbms-column>DESCRIPTION</dbms-column>
</field-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>JobEJB</ejb-name>
<data-source-name>JobDB</data-source-name>
<table-name>JOB</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>score</cmp-field>
<dbms-column>SCORE</dbms-column>
</field-map>
<field-map>
<cmp-field>setupCost</cmp-field>
<dbms-column>SETUPCOST</dbms-column>
</field-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-relation>
<relation-name>organization-memberGangsters</relation-name>
<weblogic-relationship-role>
<relationship-role-name>memberGangsters---organization</relationship-role-name>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
<weblogic-rdbms-relation>
<relation-name>gangsters-jobs</relation-name>
<table-name>JOBS</table-name>
<weblogic-relationship-role>
<relationship-role-name>gangsters---jobs</relationship-role-name>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</weblogic-relationship-role>
<weblogic-relationship-role>
<relationship-role-name>jobs---gangsters</relationship-role-name>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
<weblogic-rdbms-relation>
<relation-name>organization-theBoss</relation-name>
<weblogic-relationship-role>
<relationship-role-name>organization---theBoss</relationship-role-name>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
</weblogic-rdbms-jar> -
Error during activation of ODS data
Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful -
Error during gen of subscren container for screens [BP sales,shipping data]
Hi,
during the intial download from ECC to CRM ,sales,shipping data is not comming with BP.
i found one solution for this problm through BUSP transaction to genarate subscrenn container for screens.
I have genarated everything .But it throws error.
The error message is
"Client 101 appl.object BUPA screen $00001:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes."
Plz anyone help me to solve this problem.
regards
geetha.gHi,
Even i am facing similar problem like this..
in my case,
its working in one clinet and its not able to regenerate successfullu in another client.
its showing the same above error.
I tried removing the error by running the report BDT_VCT_CORR_001 and again generating the screens... but it was of no use..
can any one sugesst me some other points
with regards,
Sumanth
Maybe you are looking for
-
How do I delete an email account, but keep the email?
I have an email account from ISP that I no longer use. I want to delete the account, but I don't want to lose the email. How do I delete the account and save all of the email? Can I create a folder and move all of the email from the account I want
-
Vista + Acrobat 9.0 standard = crash when opening 1 doc.
I run a small network of 13 users. Everyone is on Vista and all but 1 has Acrobat 8.0. The only guy who has 9.0 is having a weird issue where he can only open a single PDF at a time. If he opens up a second, Adobe crashes. If he opens Adobe (without
-
Mozilla Firefox is not saving any of my usernames or passwords
Mozilla Firefox is not saving any of my usernames or passwords on any of the sites I visit and I'm wondering why. I clicked on Tools then I clicked on Options then clicked on the Security tab then under Passwords I checkmarked "Remember passwords for
-
TOOLS MEMORY option missing in N93
Hi, I have bought a new memory card and I am unable to format the card because TOOLS>MEMORY option is not available in my N93. Can you tell me how to format the SD card using N93 phone.
-
Feature Idea: Export Sitemap to PDF
Dear People and Adobe Muse Dev Team, I've been using Muse (currently v6.0, Build 751) for about a month now and realizing good results with the app. Thank you. One new feature that I know I can put to good use for my clients and I'm thinking other d