Error executing CIS APIs on content server

Hi I am trying to execute the client samples that came with the CIS jarfiles. All the files are getting terminated with this error..
oracle.stellent.ridc.protocol.ProtocolException:java.io.IOException: Input terminated before being able to read line
the error is in the getResponseAsBinder method call.
I am using eclipse to execute these class files...
Plz let me know if I am missing some imp configurations etc.
Regards
Jo

Hey jogeo,
Are you getting any errors in your content server logs? Or in the Server System Output?
I've seen a similarly vague error from the CIS api's when either my content server wasn't running, the conneciton to the content server db had timed out, or I didn't have my SocketHostAddressSecurityFilter set correctly in config.cfg.
If you could post any errors from the two places I mentioned above we could probably narrow down the issue.
Andy Weaver - Senior Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw >

Similar Messages

HTTP 401 error in CSADMIN for SAP content server on Linux OS and MaxDB

Hi,
We have installed content server on Linux OS.and DB as MaxDB.
I created the repository using OAC0. The with same tab I went to CSADMIN.
When I try to create repository with executing it , it ask for user name and password.
I mentioned the SAPCS admin user name and password, but i got HTTP 401 error. Unauthorized user.
Even i tried with prefixing domain name and with root user ID and password.
But got the same error. Please help
Regards,
Hemant

Hi
We are also facing the same problem. but as you mentioned in solution.
user: <domain>/<admin-user>
pw: pw
I am getting the same problem of Error 401. Kindly describe in detail with example.
Thanks
Regards,
R Karthikeyan

Error while Setting Up Oracle Content Server to Send Jobs to Oracle IBR

Hi,
I am trying to configure Oracle Content Server to send jobs to IBR.
I am using following version of UCM:
11gR1-11.1.1.3.0-idcprod1-100505T121221 (Build:7.3.0.180)
Both UCM and IBR are using same WAS domain. Installed on Windows server 2008.
1.I have started both manged servers for UCM and IBR.
2.Then by browsing IBR console http://vpunvfpctnsz-07:16250/ibr/ , i have changed the
Incoming Socket Connection Address Security Filter:
127.0.0.1|0:0:0:0:0:0:0:1|<<my.server.IP.address>>
3.Enabled DAMConverter component on IBR
4.Restarted IBR.
5.Created an outgoing provider on UCM content server as follows:
Provider Name: IBR
Provider Description: Provider for IBR
Provider Type: outgoing
Provider Class: intradoc.provider.SocketOutgoingProvider
Provider Connection: intradoc.provider.SocketOutgoingConnection
Instance Name: VPUNVFPCTN955099yscom16250 << same as IBR server name >>
Server Host Name: vpunvfpctnsz-07
HTTP Server Address:
Server Port: 16250
Relative Web Root: /ibr/
Conversion Options: Handles Inbound Refinery Conversion Jobs
Refinery read-only mode: False
Maximum Jobs to Queue: 1000
It is showing following status:
Connection State: This remains "good" when i click on test and after some time chages to "down".
Connection Error: Unable to communicate with refinery provider IBR; it does not resolve to a valid IBR. Exception type is 'java.lang.Throwable'.
Did i miss any step?
Please suggest.
Thanks and regards,
Minal

Hi
Server Port: 16250
This should be the value of IntradocServerPort for IBR server .
By default it is 5555 .
Replace 16250 with 5555 (if you have not changed it ) .
Save the changes , restart UCM managed server .
Test to see if the error shows up .
Hope it helps .
Thanks
Srinath

Error checking in document to content server

Hi,
While storing the document to content server we are getting "Error while checking in and storing " error. We use ECC 6.0 Request any inputs where to trace this error.
Thx.
Anirudh,

Hello Anirudh,
i assume that you get this error only after you click on the save button.Before clicking on the save button i assume you had checked in the original.
Suggest you to put start the debugger using "/h" and then click on the the Save button. Once the debugger opens, put a break point on the "Message" using the debugger. And start debugging using F8 key. When the control stops at any message statement , just have a look at the content of the internal table filled before the Message stmt. It would help you to figure out the exact cause of the error message.
Seeing the error message , i think that in your case it might be that signature are not sent from your system to the content server.
You can see the details about the signature associated to he content repository from the "csadmin" transaction. if you have any problem with regarding to signatures, just check if you have any active signature. I think there is not active signature, just select one signature and activate the signature.
If the problem still exists and it maps to the content server, contact your content server admin.
Hope this helps you out, Best of luck.
Regards,
Om

Error when viewing documents from content server

hi all,
I have a question.
we have installed an SAP Content Server on Windows 2003 server, and have connected it to our SAP ECC 5.00 ERP. The purpose is so that documents that are attached to a transaction (through Generic Objects Services - Create Attachment), get stored onto the content server rather than the SAP database. We have done all the necessary configuration in oac0, oact, and SKPR08. We are able to attach a document to the transaction, and it gets stored onto the content server. Our issue is when viewing the attachment.
This is the error we are getting as soon as we try to view the attachment:
"Windows cannot find c:\documents and settings\<username>\SAPWorkDir\<filename>. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
After pressing OK to the message, the system then gives this error:
"File could not be exported
Message no. SO315
Diagnosis
You have selected either the Export function or a PC document to be exported from the system. The file could not be exported to the
PC. Possible reasons:
1. The file is already open and is being used by an application.
2. The directory to which the file is to be exported is write-protected.
Procedure
In the first case, close the application.
In the second case, remove the write-protection attribute from the directory or enter another directory."
Why is the system trying to open the file from the user's C:\ drive?
Does anyone have a solution to this error?
Cheers,

Hi Aleem,
Refer to below KB & note, this should help you.
1849203 - Error message Database error for <GET DATA FROM KPRO> (SO013) and/or File could not be exported (SO315) when opening a document in Attachment list
764972 - Errors when creating workflow attachment
Regards,
Ravi

Content Server 6.40 with MaxDB 7.7.4 giving ODBC State 00000 error

Hi Guru,
I'm having a problem with Content Server 6.40 with MaxDB 7.7.4 under windows installation, as following from RZ20:
Date       Time     Short name                               Object name                              User Name    ALUSER16
Message
30.10.2009 12:55:26 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 12:55:37 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 12:55:49 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 12:56:01 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:31:22 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:31:45 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:51:05 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:51:31 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 14:03:08 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 14:03:38 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
The error is happening while executing RSCMST report. Content Server installation and configuration finished successfully. I installed for 3 server, 2 of them don't have this kind of issue. Please need your expertise on this.
Thanks in advance.
Regards,
Yan

Hi Natalia,
Thanks a lot for your suggestion. I've read the mentioned OSS last time while I was having the related issue. Now the issue had been solved by reinstall the content server. I though I did the wrong step while installing or upgrading the MaxDB.
With Best Regards,
Yan

Content Server error on LINUX (HTTP error: 404 Not Found)

Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
Harshal

Hi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

Configure MaxDB Content Server Website in IIS 6.0

Dear All:
I need to know how can I configure content server website on IIS. Our company was working on standalone server 2003 with MaxDB 7.6. Now the server has been migrated into windows 2003 cluster with MaxDB 7.6 installed on the same cluster.
I tried to execute WebSiteManCS.exe from content server CD but i got the error "An error occured during the creation of the SAP Content Server website in IIS".
Could you please advise how can I resolve this issue? Also, I did not created IIS cluster on both content server nodes. Do I have to create it or is there any steps that I have to follow in this case?
Regards,
Ahmad Yasin

Hi,
The installation of the content server creates the web site automatically.
Please refer the following SAP Notes carefully, to get more information.
[ Note 1039401 - SAP Content Server Clustering with Windows 2003.|https://service.sap.com/sap/support/notes/1039401]
[Note 175096 - SAP Content Server installation guide|https://service.sap.com/sap/support/notes/175096]
[Note 658442 - SAP Content Server 6.30 on Windows 2003 servers|https://service.sap.com/sap/support/notes/658442]
Regards,
Bhavik G. Shroff

Customizing KPRO for an external Content Server

Hello !!
Could you help us about this problem .
We need to install document's archiving onto a external Content Server (product Documentum), using KPRO.
We have customized thus :
OAC0 : Content Repository = Z1 for DMS ( DocArea) and version 045.
CSADMIN : We receive the message HTTP command adminContRep (operation configGet) is not possible for Z1 (only as of 0046) when we validate .
OACT : (Maintain category) , Z1 is affected to SOFFHTTP .
SKPR08: Categories for physical doc classes , the category SOFFHTTP is affected to the class SOFFHIO.
With the transaction CV01N , used to create a FID and to join a document , we receive the following error when we try to archive the document :
"Error during the archiving of D:\Carte..".
Nevertheless we can find the joined document onto the server Documentum.
Do we forget a customizing ??? Thanks a lot .

Hello
i don't know the version of SAP ERP you're using but nevertherless you should bear in mind this detail:
CSADMIN: "digital signature" not checked means you are not using it.
OAC0:"No signature" SHOULD be checked if you are not using it (to be consistent with CSADMIN)
However i am not sure this is solely responsible of your errors; in case of SAP content server, if it works for one user, it will work for the others.
Please be more clearer in your last part ???
Do you mean only the user having done the check-in of the file who can afterwards access the original (in display and change) ?
what do you mean by "For the other people, it doesn't find the original location" and also by "unless we create the same original location, or we change the original location".
In case of SAP Content Server, we don't care about "location", whether the file comes initially from a fileserver X or Y or Z, as far as the file has been correctly checked-in the content server, it should be accessible for anybody (as far as user rights allow it)
regards
/Sooriya

SAP Content Server

Dear Experts,
I got problem in installing SAP Content Server 6.30 in Solaris 9 (Unix-SPARC 64bit). After discus with OSS they sugest to review the Apache installation, i try to follow the OSS note number 664384, but i confused with some error about the compilation, here is my compilation step :
1. We install gcc for solaris 9 from www.sunfreeware.com
2. In PATH we add PATH=/usr/bin:/opt/sfw/gcc-3/bin
3. run configure --prefix=/home/sapcs --enable-module=most --enable-shared=max
    i got error :
============================================================
    ./helpers/TestCompile: make: not found
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
4. Then we add PATH=/usr/bin:/usr/ccs/bin:/opt/sfw/gcc-3/bin and CFLAGS="-xarch=v9" (note 664384)
================================================
re run ./configure --prefix=/home/sapcs/ --enable-module=most --enable-shared=max
Configuring for Apache, Version 1.3.41
++ using installation path layout: Apache (config.layout)+
Creating Makefile
Creating Configuration.apaci in src
++ enabling mod_so for DSO support+
Creating Makefile in src
++ configured for Solaris 290 platform+
++ setting C compiler to gcc+
++ setting C pre-processor to gcc -E+
++ using "tr [a-z] [A-Z]" to uppercase+
++ checking for system header files+
++ adding selected modules+
    o rewrite_module uses ConfigStart/End
      disabling DBM support for mod_rewrite
      (perhaps you need to add -ldbm, -lndbm or -lgdbm to EXTRA_LIBS)
    o dbm_auth_module uses ConfigStart/End
++ using builtin Expat+
++ checking sizeof various data types+
++ doing sanity check on compiler and options+
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
cd ..; gcc -DSOLARIS2=290 -DNO_DBM_REWRITEMAP -DUSE_EXPAT -I./lib/expat-lite -xarch=v9 `./apaci`     -o helpers/dummy helpers/dummy.c   -lsocket -lnsl -lpthread
gcc: language arch=v9 not recognized
ld: fatal: file helpers/dummy.c: unknown file type
ld: fatal: File processing errors. No output written to helpers/dummy
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `dummy'
============= End of Error Report =============
Aborting!
5. I tried to remove the env variable CFLAGS="-xarch=v9", and the result it successfuly installed then i tried to install SAP Content Server 6.30, the installation had been done suceesfully but when i tried to start apache, it can not load the mod_sapcs.so
Syntax error on line 205 of /home_sapcs/conf/httpd.conf:
Cannot load /home_sapcs/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal: /home_sapcs/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
apachectl start: httpd could not be started
Do you have any idea with this problem? I really need advice for this.
Thanks in advance
Bagus

Hello Experts,
Please provide the solution, how the problem was resolved. Even I am getting following error right after installation of Content server when installation prompts to restart the server, when I try to stop apache on Solaris 10, it throws following error:
Syntax error on line 233 of /usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/modules/mod_sapcs2.so into server: ld.so.1: httpd: fatal: /usr/local/apache2/modules/mod_sapcs2.so: wrong ELF class: ELFCLASS64
I am facing this issue since very long now.
Please reply at earliest.
Thanks.
Regards,
Kashyap Shah

Issue with CIS jar version - cis-application-8.0.0.jar on content server

We are having a problem adding this jar to our custom component. We are using this APIs to check-in some programatically.
Following is the error when we try to deploy our component with this jar
===============================================================
IdcAdmin: Content Server idc status: Stopped successfully
Starting the Content Server idc... The server terminated unexpectedly.
02.28 11:36:35.834 main NativeOsUtils version mismatch. The native code version is "7.1.0.2" and the Java version is "7.0.6.0".
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x00002ac72c918500, pid=26841, tid=47034930753168
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [libjvm.so+0x3a8500]
========================================================
The content server version is 10.1.3.3.
And the jar version is cis-application-8.0.0.jar. We are able to use the same jar standalone. What could be the problem? Should we need to upgrade to a diffrent jdk version? I am worried that might cause more problems.
Regards,
Pratap

Thanks for your inputs.
So far I have been looking at only CHECKIN_NEW_FORM and CHECKIN_SEL_FORM services for creating and updating content. items These services require files to be attached. I checked the definitive guide and found that there are 2 other similar services,CHECKIN_NEW and CHECKIN_SEL, that don't need the file to be attached. Instead we can specify the file path of the primary file. Since the xml content file to be checked is in th content server itlsef, these services can be used in my case. Moreover since my content checkin logic is in the context of a service, my code become more simpler.
I began working on it and am calling executeServiceSimple("CHECKIN_NEW") or executeServiceSimple("CHECKIN_SEL") based on whether the content to be checked in is new or to be updated. I am setting all the metadata values of the content file in the m_binder local data of the service object.
I thought this should work cleanly but I am getting the below error
============================================
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: intradoc.data.DataException: !csCheckinFileKeyNotSpecified,primaryFile
at intradoc.server.DocServiceHandler.addFile(DocServiceHandler.java:3251)
at intradoc.server.DocServiceHandler.addFiles(DocServiceHandler.java:410)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sitestudio.SSClassHelper.invokeRaw(Unknown Source)
======================================================
I printed out all the local data in the m_binder object. The primaryFile value is pointing to the right file path. The file is also been created in the correct location.
The dID, dDocName, dOriginalFile, dRevLabel values are all set properly. But still I am getting this error. I am not able to figure out the cause of this. Please help. Is this approach incorrect?
-Pratap

Connection pool error in content server

getting below error. resumed the suspended pool and tried restarting the content server... but, unable to get login page itself.
Unable to load the user information. There are no connections available from pool for provider 'SystemDatabase'. Unable to execute service method 'getConnection'. weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool CSDS is Suspended, cannot allocate resources to applications...
verified data source connection via weblogic (using option "Test DataSource"). it's throwing below error
Connection test failed with the following exception: weblogic.common.resourcepool.ResourceDeadException: 0:weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: Unknown host specified
NOTE: There are no changes done on data source settings

There was a similar question: Unable to load the user info or execute service method 'getConnection'
There is nothing to add to William's answer:
This is a WebLogic issue. You need to determine why the datasource was suspended. Restarting the WLS admin server and the UCM managed server should restart the suspended pool, but I'd expect the underlying issue to remain.

Search error in Content server

Hi All,
We have Migrated documents from IPM 10 g to IPM 11g.
Now currently we are working in Production environment.
But whenever I search for documents in UCM I am getting Following error
Unable to retrieve search results. Error occurred while processing. Unable to return results. Unable to create the result set for query 'SELECT Revisions.dID, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate, dCreateDate, dPublishType, dRendition1, dRendition2, dFileSize AS VaultFileSize, DocMeta.*, RevClasses.* FROM Revisions, DocMeta, Documents, RevClasses
WHERE Revisions.dID=DocMeta.dID And Revisions.dID=Documents.dID And Revisions.dDocName = RevClasses.dDocName And dIsPrimary = 1 And dReleaseState IN ('Y', 'U', 'I') ORDER BY dInDate Desc'. [FMWGEN][SQLServer JDBC Driver]Execution timeout expired. java.sql.SQLTimeoutException: [FMWGEN][SQLServer JDBC Driver]Execution timeout expired..
Please somebody help me..
Thanks in advance
vikas

Srinath Menon wrote:SELECT Revisions.dID, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate, dCreateDate, dPublishType, dRendition1, dRendition2, dFileSize AS VaultFileSize, DocMeta., RevClasses. FROM Revisions, DocMeta, Documents, RevClassesWHERE Revisions.dID=DocMeta.dID And Revisions.dID=Documents.dID And Revisions.dDocName = RevClasses.dDocName And dIsPrimary = 1 And dReleaseState IN ('Y', 'U', 'I') ORDER BY dInDate Desc
Execute the above query on the DB directly and see if that brings up the results .>
It looks like you may not have followed Srinath's instructions exactly. You edited your query to include a schema namespace, which defeats the purpose of running the query that the system is actually attempting to execute. Please run the exact query that was requested, since that's the query the system is actually running.
If you run the query as posted in the original error (and included in Srinath's request), I would expect it to fail, as it appears to be malformed (see "DocMeta., RevClasses."). The trailing dots are probably the issue, and they shouldn't be there.
If you cannot execute a search directly in the Content Server interface successfully, please post which search engine is being used. The query above is actually part of a query called a datasource. This particular datasource has been used for many years and is quite stable. I'd imagine that something else (like a customization or some other productized component) is the culprit, especially if the standard search within the Content Server itself is no longer working.

DMS Content Server installation error

Dear all:
We're now installing our SAP Content Server 640 for our DMS solution. The environment is Windows 2003 x64 Enterprise Edition SP2, SAP Content Server 640, and MaxDB 7.6. In the installtion initial screen, we choose the option to install the content server, the system reports an error even before it starts the installtaion process. The error message is
"FCO-00011 The step changeUserInstall with step key |SAP_CONTENT_SERVER|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0|changeUserInstall was executed with status ERROR " in step "initial password manager".
Please help.

hi
download patch for "SAPInst.exe" from Note 929929
May be it will help you.
regards,
nitin
award point if useful

Error occured while installing urm on content server

we are trying to install urm version '10.1.3.5.0 (Build 07_06_2009)' on content server '10.1.3.3.3 (080807)'
error occurs with the server output log:
helperservice: service exception in INDEXERSTATE.INITIALIZE_SUB[11] -32 loadFieldInfoFromMetadata -32 Unable to execute service (null) and function loadFieldInfoFromMetadata.
(System Error: The column 'dDecimalScale' does not exist in this table.) The column 'dDecimalScale' does not exist in this table. [ Details ]
An error has occurred. The stack trace below shows more information.
!$helperservice: service exception in INDEXERSTATE.INITIALIZE_SUB[11] -32 loadFieldInfoFromMetadata -32 !csServiceDataException,(null),loadFieldInfoFromMetadata!$!csSystemError,\!syColumnDoesNotExist\,dDecimalScale!syColumnDoesNotExist,dDecimalScale
intradoc.common.ServiceException: !csServiceDataException,(null),loadFieldInfoFromMetadata!$!csSystemError,\!syColumnDoesNotExist\,dDecimalScale
     at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
     at intradoc.server.Service.buildServiceException(Service.java:1999)
     at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
     at intradoc.server.Service.createServiceException(Service.java:1988)
     at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1450)
     at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1417)
Can you find out for me whether there's an patch which will address this issue?'
Many thanks

Hi
This error is happening since you are trying to install URM 10.1.3.5 on UCM 10.1.3.3.3 and the error mentions "dDecimalScale" .This new value has been introduced from UCM 10.1.3.5.0 and for that you will have to donwload the latest patchset 6907073 from metalink and install and enable the same on CS.
Then restart the CS and pretty sure you will not hit this issue. This issue has come up as a result of version mismatch.
Let me know the results.
Srinath

Error executing CIS APIs on content server

Similar Messages

Maybe you are looking for