Error in broadcasting the Workbook

Hai friends,
     I have scheduled the broadcaster for a workbook with 10 different settings through E-mail. I have 1 precalculation server. I have added it to the ZIP file. But when I try to open the attachment, I get the following error:
"Microsoft Excel File Repair Log
Errors were detected in file 'C:\Documents and Settings\new user\Local Settings\Temp\WORKBOOK_456S06PWE1LDWYQMTAK80QX3E.XLS'
The following is a list of repairs:
Damage to the file was so extensive that repairs were not possible. Excel attempted to recover your formulas and values, but some data may have been lost or corrupted."
What does it mean?  Kindly help.
Thanx in advance!
Regards,
Neha Solanki

Hai Shabar,
          My doubt is not answered from any of the FAQs that u sent. Can u plz tell me if there is any other resource where I can track this problem from? Anyways,Thanx for ur help!!
Regards,
Neha

Similar Messages

  • Error while executing the workbook query.

    Hi guyz
    i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
    The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
    we re-transported the queries but still we are facing the same problem.
    while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
    " NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
    the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
    could someone please tell me where we went wrong and why we are getting this error.
    Regards,
    Anil Vadde

    Hey ,I think data load to your target on which the query was based had some issue.
    Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
    Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
    Regards,
    RK

  • Getting error while opening the workbook

    Hi,
    I am getting one error while opening the workbook.
    Error: The Dependency "Join condition" is not found in EUL.
    Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
    Please advice.
    Where i can get the dependency information in EUL?
    Thanks, rajesh

    This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
    Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
    Russ

  • Got  system error while executing the workbook

    Hi All,
    While executing the workbook, I m getting the following error:=-
    Abort system error:RSDRC/ Function rsdrc_cube datget_disp rfc tas
    Abort system error:RSDRC/ Func RSRDC_MULTICUBE_DATA_GET_PARA ERROR IN RSDRC_

    Hi Sonika,
    I think the DataTarget is not in active status.
    Assign points if it helps...
    Regards,
    ARK

  • Bex Analyzer-No space error on refreshing the Workbook

    HI all,
    I am trying to execute a workbook with below fields
    Parner ID,Cus Name,Market class and volume.
    The requirement is to show the top 5 customers in the workbook.As there are huge volume of records I just filtered on Market class and executed the query and applied the condition on Partner ID and volume then came back and removed the filter and everything is fine and showing overall top 5 customers.
    When I closed that workbook and trying to refresh it then it is showing No Space error .I am just wondering what could be the reason for this.Any help is highly appreciated.
    Thanks in advance
    PV
    Edited by: S VR on Feb 6, 2012 4:35 PM

    1. Try creating aggregates & rollups, if data is very huge, BASED on the query.
    2. Check OLAP cache by the RSRCACHE. Check the report/query performance in BEx/HTML via RSRT.
    3. Do some research on the query properties, fine tune; don't just drag drop cios. Try with minimal restrictions.
    4. For Top-N type series, you can use APD also for better & faster analysis.

  • Getting 'Page Not Found' error while launching the Workbook

    Hi,
    When the user is trying to launch a particular workbook in Discoverer Viewer by clicking on the Workbook name in the List of Workbooks page of E-Business Suite, he is getting the 'Page Not Found' error.
    Did anyone faced similar issue?
    Please let me if anyone knows the cause and solution.
    Thanks,
    Lokesh.

    Hi Michael,
    Thanks for your response, Actually the user is getting this error in E-business Suite.
    The user will do the following before getting this error.
    1) Logs into the E-business Suite with appropriate login credentials.
    2) User will see the HTML Page which will show all his Responsibilities.
    3) User clicks on the 'XXXXX GL Discoverer Viewer' responsibility
    4) The HTML Page gets refreshed and the user will see the menu 'Discoverer Viewer' on the right side of the HTML Page.
    5).User clicks on the menu item 'Discoverer Viewer'
    6).A new HTML page gets generated which will display all the Workbook names to which the user(Responsibility) has the access.
    6).Now the user clicks on a specific Workbook name to launch the Workbook.
    7).User gets the 'Page Not Found' error.
    The user is getting this error only for one Workbook,other Workbooks are not causing any problem, the user is able to launch other Workbooks from the same page.
    I believe that E-business Suite generates the HTML Page with all the Workbook names and wondering why only one workbook is giving error.
    Thanks,
    Lokesh.

  • Error while executing the WorkBook

    Hi,
    While executing WorkBook, I am facing an error "A critical program error has occured. The program will now terminate.Please refer to the trace for further information".
    When I check in the trace, the error description is "System.NullReferenceException: Object reference not set to an instance of an object."
    Can someone plese guide me on how to solve this issue !!
    Thanks & Regards
    Seshendra Reddy

    Hi,
    Make sure you have .NET framework 2.0 with latest Service Packs installed on your system. Also try and see if you will be able to run the report by having more selections for restricting the data to a minimum. This is because, BI 7, uses more memory than what BW3.5 used to use. This inturn results in some reports not to run for same selection for which we could get back result in BW3.5
    Thanks,
    KR
    Edited by: KR on Jan 20, 2009 3:59 PM

  • Error while opening the workbook through Oracle EBS

    Hi All,
    I have created a discoverer report in Production DB instance. I can successfully open and run the report using desktop edition. But the same report cannot be open through Oracle Ebusiness Suite.
    It gives the following error
    Error opening Workbook named:
    The following Item cannot be found:Xx test V.column1Can any one help me to solve this. Any one can tell me what's the cause of this error?
    Thanks
    Alaka

    Hi alaka,
    But the same report cannot be open through Oracle Ebusiness Suite.To open it in the ebusiness suite,you need to register the report as a form page and assign a responsibility in ebusiness suite for the end user to open the report.
    did u register the reports and given access ??
    By,
    Kranthi.

  • Error in Broadcasting

    Dear Gurus,
    We are facing an error in one of the 15 settings created for a Query while all others are working fine only this one is giving a problem while execution.
    It gave the following error while broadcasting :
    The following error text was processed in the system P24 : Invalid partial field access: Length 0
    The error occurred on the application server otc160_P24_11 and in the work process 1 .
    The termination type was: RABAX_STATE
    And the following error came up in ST22 :
    Short text
        Invalid partial field access: Length 0
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', wa
    caught in
    procedure "PRECALCULATE_1" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    In the executed program "CL_RSR_PREC_SERVER============CP", the system
    attempted to access the field
    "L_S_WBSTORE-CLUSTD" using the length 0.
    However, a partial field access with the length specification 0 is not
    allowed.
    If anybody is aware of the problem and has faced a resolution of the same could you please let me know about the resolution.
    Our system has been upgraded to EHP1 Pack 4 and since the same thing is working for other settings it doesnt seem to be a problem with System Pack.
    Regards,
    Den

    Hi Yi,
    There was an issue with Master data not maintained for the setting. Hence this was an issue.
    Could you please check all the Mater Data and check.
    Regards,
    Manu

  • Information Broadcasting - Error in the Workbook

    Hi,
    We are implementing Information broadcasting for the workbook. It works pretty good as far as running the workbook, scheduling the workbook on a precalc server. When we try to email the workbook we get the email but the file is corrupted. We see the following error on the precalc server log,
    Event Type:     Error
    Event Source:     SAP BW Precalcultion Service
    Event Category:     Devices
    Event ID:     608
    Date:          10/27/2005
    Time:          3:57:24 PM
    User:          N/A
    Computer:     NAMDMS049V
    Description:
    E,608,Error in Calculation error:Object reference not set to an instance of an object.,Object reference not set to an instance of an object.
    When we open the workbook we get a message that the excel is corrupted.
    Has anyone had similar problems.
    Your help is appreciated.
    Latha

    Hi,
    Check the below error in the workbook for reference field of the query.
    <i>E,608,Error in Calculation error:Object reference not set to an instance of an object.,Object reference not set to an instance of an object.</i>
    Refresh the work book and check it the values for the column. if you get the same error then check the corresponding reference value of the query. there might be some problems in the query/
    Thanks,
    mahantesh

  • Data Refresh Error: We cannot locate a server to load the workbook Data Model.

    Hello,
    Recently I have developed a PowerBI Report using Excel Workbook with external data source. It refreshes successfully for some days and then starts throwing error on every scheduled refresh as "We cannot locate a server to load the workbook Data
    Model." 
    The workaround solution is to restart the application server which has SQL Server Power Pivot Services Installed which will again work for some more days and again start throwing error.
    So, I am looking for permanent fix for it.
    Following are additional details about our SP Farm:
    No. of front end servers: 2, Application servers:2, DB servers 2 with windows fail over cluster.
    PowerPivot Server is installed and configured from App 2 server.
    Error Log from event viewer:
    Unable to load custom data source provider type: Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdDataSourceProvider, Microsoft.PerformancePoint.Scorecards.DataSourceProviders.Standard, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
    System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
    File name: 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
       at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
       at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
       at System.Type.GetType(String typeName, Boolean throwOnError)
       at Microsoft.PerformancePoint.Scorecards.Server.PmServer.InitializeCustomDataSourceProviders()
    PerformancePoint Services error code 10107.
    Thanks,
    Ibrahim

    Hi ibrahim,
    Please try to do the following steps:
    1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
    http://www.microsoft.com/en-us/download/details.aspx?id=26728
    2. In the Application Management section of the Central Administration home page, click Manage service applications.
    On the Manage Service Applications page, click the Excel Services service application that you want to configure.
    On the Manage Excel Services page, click Data Model.Click Add Server.
    In the Server Name box, type the name of the Analysis Services instance that you want to add.
    3. Check the thread below:
    https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
    More information:
    https://timpanariuovidiu.wordpress.com/2013/02/14/71/
    https://support.microsoft.com/kb/2769345?wa=wsignin1.0
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Excel Services 2010 Error - "The workbook cannot be opened."

    I enabled Excel Services and added a Excel Web Access viewer to my page. It's just a simple spreadsheet (which incidentally works fine on my standalone development server) that displays the error "The workbook cannot be opened." when the page loads. The trusted
    file locations are set up appropriately. We are using Kerberos authentication.
    My event viewer showed this "Critical" event (ID: 3760):
    SQL Database 'Prod_WSS_Content' on SQL Server instance 'servername' not found. Additional error information from SQL Server is included below.
    Cannot open database "Prod_WSS_Content" requested by the login. The login failed. Login failed for user 'domain\user'.
    In other words, the service account that ECS was running under did not have permission to the content database. So I granted the user read permission on the database. Then I got the same error and this "Error" level event in the event viewer (ID: 5617):
    There is a compatibility range mismatch between the Web server and database "Prod_WSS_Content", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility
    range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
    This error is typically associated with 2007 to 2010 upgrades apparently, but I did a fresh 2010 installation on a pristine machine. I found a very helpful post on the subject on the MSDN blogs:http://blogs.msdn.com/b/jjameson/archive/2010/05/04/the-workbook-cannot-be-opened-error-with-sharepoint-server-2010-and-tfs-2010.aspx
    I gave the ECS service account db_owner permission on the content database. I'm still getting the error "The workbook cannot be opened." I ran the PowerShell commands listed at the bottom of the post, and no change.
    What's interesting now, is that nothing at all is showing up in the event
    viewer. I wonder if it is because of the statement in the event log that says "connections to the data have been blocked due to this incompatibility." Is there something on the SharePoint server blocking the connection to SQL Server that needs to be reset?
    Rob Wilson - MCT. MCTS, MCITP SharePoint. http://sharepointblog.kellerschroeder.com http://www.therobman.com/blog

    Hi Rob Wilson,
    I suggest you to check the following things at first:
    1.      
    What’s the version of the excel file? Excel 2003, Excel 2007 or Excel 2010? Excel Service doesn’t support Excel 2003 and easier version;
    2.      
    Are there some features the Excel Service do not support?
    More information about the Supported and Unsupported Features
    http://msdn.microsoft.com/en-us/library/ff595319.aspx
    3.      
    If the excel is connected to SQL, did you save the connect file to the Data Connection Library?
    Shared your views.

  • "An error occured while working on the Data Model in the workbook" on some workbooks published to Power BI site

    Hello,
    I am using the Power BI for Office 365, and I have published several Excel 2013 workbooks having Power Pivot Data Models.
    I have a problem on some of the workbooks, once a slicer is selected, I get the error: "An error occurred while working on the Data Model in the workbook" and the slicers do not affect the charts.
    Some workbooks work perfectly fine. I am using the same user for all workbooks when creating and publishing. I tried with small workbooks less than < 10 MB size and larger workbooks > 10 MB. There is no rule, some workbooks larger than 10 MB work perfectly
    with the slicers effecting the charts, and some don't. Similarly for smaller size.
    Any ideas of how I can debug the cause of the issue? 
    Appreciate any feedback, 
    Thanks,
    Grace

    Hi Grace,
    I assume that the experience in the Excel client is working fine, right?
    Are you getting a correlation id with the error?
    Please send us a bit more information / samples to reproduce over email to
    this address.
    thanks,
    Guy
    GALROY

  • Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

    Hello,
     I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
    1-Unable to refresh data for a data connection in the workbook.
    Try again or contact your system administrator. The following connections failed to refresh:
    PowerPivot Data
    2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
    3-01/21/2012 17:26:47.08  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel
    Calculation Services     bccc Medium   Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
    [0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.08  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     f1va Medium   CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.09  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     eq3r Medium   ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
    WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     aysl Medium   Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     8xk9 Medium   ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
    'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
    externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
    Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12* w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     8xk9 Medium   ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
    UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
    My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
    Thanks in advance for your help

    Hello Challen Fu
    I would be so grateful if you could please help me out
    I have been trying to find a solution to the same error message
    In my case, the power pivot reports were working before on a regular team  site , but then two things changed:
    a)  I  created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
    b)  On the  backend, the database instance was upgrated to SQL Server 2012 
         Front end Server VDSP01  remains  SQL Server 2008 R 2 where Sharepoint 2010  was installed as a FARM  
    Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
     Scenario recap:
    a- Server VDSP01  uses SQL Server 2008 R 2 where Sharepoint 2010  was installed as a FARM
    b- On the back end,  the database instance name was replaced with SQL 2012 Server:
               from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
               to     SQL Server 2012 ( instance VTSQL01\COTS)
    c-  I was told that:
         From VDSP01, they ran
    CliConfg.exe   to create SQL Server Alias :
           where    BEFORE: vdsharepoint -->  DBDEV-COTS\COTS
                and  AFTER    : vdsharepoint -->  VTSQL01\COTS
     I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
      <v:stroke joinstyle="miter">
      <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
      <v:f eqn="sum @0 1 0">
      <v:f eqn="sum 0 0 @1">
      <v:f eqn="prod @2 1 2">
      <v:f eqn="prod @3 21600 pixelWidth">
      <v:f eqn="prod @3 21600 pixelHeight">
      <v:f eqn="sum @0 0 1">
      <v:f eqn="prod @6 1 2">
      <v:f eqn="prod @7 21600 pixelWidth">
      <v:f eqn="sum @8 21600 0">
      <v:f eqn="prod @7 21600 pixelHeight">
     <v:f eqn="sum @10 21600 0">
    </v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
     <v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
    <o:lock aspectratio="t" v:ext="edit">
    </o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
    <v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
    </v:imagedata></v:shape>
    wanda larangeira

  • "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

    Hi Techys,
    can you give me the suugestions for below error in sharepoint 2010.
    Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
    User having the contribute permission.
    as a admin i can open the document without any error.
    user wants to open the document via online and VPN connection.
    while the user seeing the document info the below error is indicationg .
    Offline Copy, Work book is readonly Mode.
    The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
    Many Thanks,
    Madhu

    Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
    --Cheers

Maybe you are looking for