Error in Creating Time series objects in APO 5.0
Hi, We are implementing APO 5.0. I am trying to Create Time series objects for Planning Area 9ASNP05, but getting the following Run Time Error
We have used Support Package 10
Runtime Errors PERFORM_TOO_MANY_PARAMETERS
Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
not caught in procedure "RSS_TEMPLATE_INSTANTIATE" "(FUNCTION)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is: A PERFORM was used to call the routine "INSTANTIATE" of the program
"GP_MET_RSSG_HEADER_COMMENT".
This routine contains 15 formal parameters, but the current call
contains 16 actual parameters.
Any
Hi
I am getting exactly the same error, on SCM 5.0 SR2, running on Windows 2003 64 BIT & SQL 2000.
Conditions for error:
Using transaction:
/SAPAPO/MSDP_ADMIN
Select: Planning Object Structures
Short Dump occurs if you either:
1. Attempt to deactivate an active Planning Object Structure
2. Attempt to create a Characteristic Combination
Gives a runtime error shortdump PERFORM_TOO_MANY_PARAMETERS
Error analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
not caught in
procedure "RSS_TEMPLATE_INSTANTIATE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A PERFORM was used to call the routine "INSTANTIATE" of the program
"GP_MET_RSSG_HEADER_COMMENT".
This routine contains 15 formal parameters, but the current call
contains 16 actual parameters.
Has anyone seen this before?
Did you find a solution Bhavesh ?
Thanks.
Similar Messages
-
Problem in creating time series objects for a planning area
Hi Friends,
I am working on SCM 4.0 APO. I am trying to create the time series objects for a 'Z'planning area which i have created. This Planning area is linked to a planning object structure which contains only three characteristics 9amatnr,9alocno & zplnpart. But the creation of time series objects is taking a long time. the screen just remains the same.
Can anybody encountered such a problem any time?
request you all to put some light as what could be wrong or causing the delay in creating them???
All helpfull answers will be suitably rewarded.
Thanks
mvdHi mv d,
I have a couple of questions:
1) how many Key Figures does your planning area have?
2) what is the length of your time series horizon?
3) how many characteristic combinations are currently in the Planning Object Structure? and how many newly character
I am asking because these aspects might affect the running time of the time series creation. Have you also tried creating the time series in the background? How long did it take there? -
Time Series Objects for a Planning Area
Hi all,
Can anyone let me know why do we create Time Series Objects for a Planning Area.
What is its Role & significance..
Regards,.
Vishal.S.Pandyatime series is usually a Demand planning concept(and used in SNP as well but in SNP its predominantly the order series that plays a main role)
time series is a general concept in statistics(and forecasting) wherein the value of a key figure is represented in a time bucket
Time series gives you an idea of the gradual change in the values by time and the relation of the future based on the past
planning area in APO (and other tools) tries to represent this as a 2 dimensional model with time on the columns and key figures in the rows. the value that you load into the cells that are formed by the above are based on the characterisitic values you choose from your MPOS which is linked to the way the values are stored in the planning area
The planning area stores data for each key figure in the smallest unit of time(technical storage buckets) and the lowest level of characterisitc value combination -
How to restore data of time series objects
Dear All,
I was checking functionality of report for Anchors
/SAPAPO/DM_LC_ANCHORS_DELMANDT
This deactivated all the planning areas by deleting time series objects. Hence the data lose.
Could i get back the data?
Regards,
VijayYou can if you have a backup copy of time-series in an Infocube, then use the transaction /sapapo/tscube to copy back from the infocube into your planning area.
Otherwise I am afraid you are stuck somewhat.
Having looked at the coding, it seems that this report deletes ALL planning versions for the current client hence the reason why it deleted time series objects. You will need to Create another Planning version (via transaction /sapapo/mvm) then "Create Time Series Objects" for your Planning Area against this new planning version (via transaction /sapapo/msdp_admin). As I said, however, any time series objects will have been lost if you have no backup, this will only reinitialise the planning area. -
Error while creating Vacancy requisition object (NB) after upgrading EHP4
Hi All,
We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
Can any body help how to resolve this issue?
Thanks in advance.
Regards,
SreelathaHi
Hope SAP Note 1241014 will be useful to you.
Best Regards
Reddy -
Time series objects and order objects on what condtion we need to use
Dear Experts ,
I have question regarding Time series objects and order objects
from my understanding
TIme series objects the data is stored in time buckets without
reference to orders.
Order objects the data is stored as orders. Key figure data is
then saved as orders if semantic 000 is entered in the detail view of the key
figures in the planning area.
my question is when to use the option 1 and when should not use
same for option 2
Many thanks
Regards
RajHi,
This depends on the requirement you have also the application you are using.Like DP key figures are generally time series since in DP you do not need order numbers for example for history sales the requirement is the quantity period wise but not the order numbers.
Again in SNP the distribution and planned quantities are required order wisecoz you need the order numbers you execute the same in ECC system or for Pegging purposes.
Now the safety stock requirement can not be at order series since this is with relevent to some periods.
So overall i can say this depends on the requirement of the kay figure.
Hope this can help.
regards,
kaushik -
Error while creating a callable object - User Interface
Hello,
When i'm trying to create a callable object - User Interface in the guided procedure design time. i'm getting an error. An internal server error. This is happening while i'm trying to create a guided procedure with webdynpro's.
Is there any body who allready had somthing like this.
Greetings
KurtHi Raja Akella,
I allready had the roles and my portal version is upgraded until SP8 and all the possible patches.
I get an internal server error when i want to create a callable object. specially when i want to create a webdynpro ( ABAP / JAVA).
In the visual administrator i get the following errors.
<b>Error 1</b>
Exception occured during processing of a Web Dynpro application: "com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.".
[EXCEPTION]
com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponentInternal(IWDApplicationInfo.java:286)
at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponent(IWDApplicationInfo.java:270)
at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.addWdappsElement(COConfigWDApp.java:646)
at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readWebDynproApps(COConfigWDApp.java:631)
at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readApplications(COConfigWDApp.java:308)
at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalCOConfigWDApp.readApplications(InternalCOConfigWDApp.java:190)
at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.initCreate(VSelect.java:306)
at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.onPlugFromDispatch(VSelect.java:174)
at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalVSelect.wdInvokeEventHandler(InternalVSelect.java:168)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)
at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:178)
at com.sap.tc.webdynpro.repository.persistence.xml.XMLPersistence.doReadVMO(XMLPersistence.java:126)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.readVMO(RepositoryPersistence.java:356)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.doFindRepositoryObject(RepositoryPersistence.java:598)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.findRepositoryObject(RepositoryPersistence.java:170)
at com.sap.tc.webdynpro.repository.model.Repository.findRepositoryObjectInternal(Repository.java:590)
at com.sap.tc.webdynpro.repository.model.RepositoryObjectRelation$XMLGuidWrapper.getModelObject(RepositoryObjectRelation.java:462)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.getCurrentLayerObject(RepositoryPersistence.java:702)
at com.sap.tc.webdynpro.repository.model.Repository.getCurrentLayerObject(Repository.java:1483)
at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.doMergeInheritedTarget(NonSharedRelationToOne.java:85)
at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.mergeInheritedTargets(NonSharedRelationToOne.java:49)
at com.sap.tc.webdynpro.repository.model.RelationToOne.getTarget(RelationToOne.java:93)
at com.sap.tc.webdynpro.repository.model.AbstractRepositoryModelClass.getRelatedModelObject(AbstractRepositoryModelClass.java:234)
at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:636)
... 39 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)(:main:, row=1, col=491) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:148)
at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:166)
... 52 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1566)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1687)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
... 53 more
<b>error 2</b>
Processing HTTP request to servlet [dispatcher] finished with error. The error is: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponentInternal(IWDApplicationInfo.java:286)
at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponent(IWDApplicationInfo.java:270)
at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.addWdappsElement(COConfigWDApp.java:646)
at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readWebDynproApps(COConfigWDApp.java:631)
at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readApplications(COConfigWDApp.java:308)
at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalCOConfigWDApp.readApplications(InternalCOConfigWDApp.java:190)
at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.initCreate(VSelect.java:306)
at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.onPlugFromDispatch(VSelect.java:174)
at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalVSelect.wdInvokeEventHandler(InternalVSelect.java:168)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)
at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:178)
at com.sap.tc.webdynpro.repository.persistence.xml.XMLPersistence.doReadVMO(XMLPersistence.java:126)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.readVMO(RepositoryPersistence.java:356)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.doFindRepositoryObject(RepositoryPersistence.java:598)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.findRepositoryObject(RepositoryPersistence.java:170)
at com.sap.tc.webdynpro.repository.model.Repository.findRepositoryObjectInternal(Repository.java:590)
at com.sap.tc.webdynpro.repository.model.RepositoryObjectRelation$XMLGuidWrapper.getModelObject(RepositoryObjectRelation.java:462)
at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.getCurrentLayerObject(RepositoryPersistence.java:702)
at com.sap.tc.webdynpro.repository.model.Repository.getCurrentLayerObject(Repository.java:1483)
at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.doMergeInheritedTarget(NonSharedRelationToOne.java:85)
at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.mergeInheritedTargets(NonSharedRelationToOne.java:49)
at com.sap.tc.webdynpro.repository.model.RelationToOne.getTarget(RelationToOne.java:93)
at com.sap.tc.webdynpro.repository.model.AbstractRepositoryModelClass.getRelatedModelObject(AbstractRepositoryModelClass.java:234)
at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:636)
... 39 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)(:main:, row=1, col=491) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:148)
at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:166)
... 52 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1566)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1687)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
... 53 more
<b>error 3</b>
Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
Exception id: [00505691431B006F0000003E00000FE800041B45B87F7617]
thanks in advance
Kurt -
Error when creating a ReportDocument object in ver 11.5.3300.0
When I try to create a new ReportDocument from .NET the application exists with no other information. There is an event log entry similar to this one:
Faulting application CrystalTest1.vshost.exe, version 9.0.21022.8, time stamp 0x47316898, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x04525da0, process id 0x10fc, application start time 0x01c9c2d6d624913d.
Investigating more I tracked down that the error happens when I try to create various COM objects from Crystal Reports (for example by running the following vbscript: Set o = CreateObject("CrystalClientDoc.ReportClientDocument")). The error is always an Access Violation in cachemanager.dll on address 3f8691b5:
3F869172 push ebx
3F869173 push esi
3F869174 push edi
3F869175 push 3F873464h
3F86917A call dword ptr ds:3F86C04Ch
3F869180 mov ebx,dword ptr esp+10h
3F869184 mov esi,eax
3F869186 mov eax,dword ptr esi
3F869188 mov ecx,esi
3F86918A mov dword ptr esi+4,ebx
3F86918D call dword ptr eax+8
3F869190 push esi
3F869191 lea edi,esi+14h
3F869194 push eax
3F869195 mov ecx,edi
3F869197 call 3F8690EE
3F86919C mov edi,dword ptr edi
3F86919E push edi
3F86919F push 0FFFFFFFCh
3F8691A1 push ebx
3F8691A2 call dword ptr ds:3F86C254h
3F8691A8 push dword ptr esp+1Ch
3F8691AC push dword ptr esp+1Ch
3F8691B0 push dword ptr esp+1Ch
3F8691B4 push ebx
3F8691B5 call edi
3F8691B7 pop edi
3F8691B8 pop esi
3F8691B9 pop ebx
3F8691BA ret 10h
The full stack trace is:
00455B60()
cachemanager.dll!3f8691b7()
http://Frames below may be incorrect and/or missing, no symbols loaded for cachemanager.dll
user32.dll!7735f8d2()
user32.dll!7735f794()
user32.dll!7735f73d()
user32.dll!77360817()
user32.dll!773539f7()
ntdll.dll!771f99ce()
user32.dll!77353cf7()
user32.dll!77353b94()
user32.dll!77353cc3()
atl71.dll!7c12c51d()
atl71.dll!7c12c633()
atl71.dll!7c121653()
user32.dll!77353d9a()
cachemanager.dll!3f86922f()
cachemanager.dll!3f86949e()
cachemanager.dll!3f869600()
cachemanager.dll!3f868aec()
msvcr71.dll!7c349565()
kernel32.dll!760e4911()
ntdll.dll!771de4b6()
ntdll.dll!771de489()
The address called at 3f8691b5 seem to always contain the following data in my case:
00455B51 00 00 add byte ptr eax,al
00455B53 00 00 add byte ptr eax,al
00455B55 00 00 add byte ptr eax,al
00455B57 00 DA add dl,bl
00455B59 44 inc esp
00455B5A 44 inc esp
00455B5B 3A 00 cmp al,byte ptr eax
00455B5D 00 00 add byte ptr eax,al
00455B5F 8B db 8bh
00455B60 C7 44 24 04 70 1F F4 01 mov dword ptr esp+4,1F41F70h
00455B68 E9 4E 39 41 3F jmp 3F8694BB
00455B6D 00 00 add byte ptr eax,al
00455B6F 00 DF add bh,bl
00455B71 44 inc esp
00455B72 44 inc esp
00455B73 3A 00 cmp al,byte ptr eax
00455B75 00 00 add byte ptr eax,al
00455B77 88 E0 mov al,ah
00455B79 66 45 inc bp
00455B7B 00 90 5B 45 00 B8 add byte ptr eax-47FFBAA5h,dl
The data and the address seem to be always the same in my case.
I am running 32-bit Vista Ultimate on a dual core Intel Centrino CPU. I have a Crystal Reports Deployment suite installed. The cachemanager.dll is 106,496 bytes and the file version is 11.5.8.998
Pelase help!Hi Ludek,
Thanks for looking into this.
> What version of .NET are you using?
I have all version of .NET installed but please note that .NET is not required to reproduce the problem. Please read again my initial post. The error can be reproduced with this single line of VB Script and there is no .NET involved:
Set o = CreateObject("CrystalClientDoc.ReportClientDocument")
The same can be reproduced by creating a new ReportDocument object from .NET in any type of .NET application.
> What CR Service Pack are you on?
I haven't installed any additional service packs. Please see the versions of the files I have on my system to figure out the service pack:
Crystaldecisions.Crystalreports.Engine.dll file version = 11.5.9708.998
cachemanager.dll file version = 11.5.8.998
clientdoc.dll file version = 11.5.8.998
The other computers where all works good have the same versions installed.
> What .NET Service Pack are you on?
All latest service packs and updates from Microsoft are installed
> What is the version of the CR assembly crystaldecisions.Crystalreports.engine.dll referenced in your application?
The assembly version is 11.5.3700.0, file version: 11.5.9708.998, file size: 393,216 bytes
> Is this a web or a win app?
The error happens in btoh web and windows forms applications as well as by simply trying to create the Crystal COM object directly from VB Script without involving any .NET. So the same error will occur if CR are used from VB6 for example.
> What OS are you on?
Again as per my original post I am using a 32-bit Vista Ultimate on a dual core Intel Centrino CPU
> What happens if you try to run an existing application?
I get a crash in unmanaged code in cachemanager.dll at 0x3f8691b7. All the details are in my original post (scroll up). When this happens in a .NET application, the process is terminated and Vista shows a message that the program has stoped working. There is an error in the event log (see my original post)
> There are different ways of instantiating a report. The sample app vbnet_win_simplepreview has all of these. Running the app with the different options may give us a clue... Was Crystal Reports installed before .NET or after?
Crystal Reports Basic for Visual Studio 2008 was installed with VS 2008. After that I installed Crystal Reports Server Deployment
> Have you tried to reinstall Crystal Reports?
Yes I did reinstall both Crystal Reports Basic for Visual Studio 2008 and Crystal Reports Server Deployment in reverse order (i.e. the server deployment first and then the basics) -
Unable to create time series ago function
Hello guys
I am running into a problem about time series function, ago function
I have a simple schema, fact <---->Time dimension
I have created time dimension hierarchy where month is the lowest level, I have also made it "time dimension" and month is the "chronogical key"..
When applying ago function, I am putting my measure from the fact table, level as "month" from time dimension table, and 1 meaning 1 month ago, when I complile it, I get the following error:
[nQSError: 27009] Unresolved identifier: "FTTNBILLSUM"."FTTNOBIEEBILLTIME"."Month".
Could anybody help me out as what the system doesn't like about this column?
ThanksThanks Maden
I did the correction and now it's giving a different error: [nQSError: 22038] Function AGO requires at least one measure attribute in its first argument.
My code is:
Ago("FTTNBILLSUM"."F_Bill_Sum"."ATM_UNITS_Sum" , "FTTNBILLSUM"."D_Time"."Month" , 1)
I have time hierarchy that names: D_Time with Month at the lowest level with Chrono keys, there is no level above it except grand total level, so only 2 level hierachy
I have a fact table that is F_Bill_Sum, which is join to D_Time... I made the D_time both the name of table and hierarchy
Please let me know what this error is coming from
Thanks -
Error while creating a system object for R3 in portal
Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AMI created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj -
Error while creating new entity object.
Hi all
I'm using Jdev 11.1.1.3. I want to create an entity object and Jdev issues an information error saying "Either this is not a valid name or an object with that name already exists."
I found that if the package I'm targeting for the new entity is called "com.test.model.whatever" I cannot create a EO called "Whatever".
I can't find any reference in the fusion developer guide that constraints the entity names to be allowed.
Is there a way to circumvent this issue or is this the way it should be?Sudipto and Suresh, thank you very much for your replies.
I know that changing the package or entity name would work, but was expecting some other kind of workaround, something like giving a full qualified name on some xml or something to avoid the name clash or whatever the problem is.
I do not like packing all the entities together as it goes against my best practice of packing things that change together on the same package. Also I don't like suffix or prefix class names as it goes against my best practice of short descriptive names.
So well, I will have to tinker the names some more and meet you guys half way.
I will now mark this thread as answered, thanks again. -
Error while creating Time Card Using API
Hello
I have a requirement to run OTL Interface once day to create/update Time Card in OTL for those datea created on sysdate-1 in Service Module (data will get feeded from Service Module). For example this interface will run on sysdate to create time cards for those data created in the service module on sysdate-1.
I have some sample data and code I am using but it is erroring out with different errors..Can anybody help me on this
My Interface should run as expected below and my time card range will be Monday 24-Dec-2012 to Sunday 30-Dec-2012
Interface Run Date Time Entry to process
25-Dec-2012 24-Dec-2012 Data
26-Dec-2012 25-Dec-2012 Data
CREATE OR REPLACE PROCEDURE main_process (o_errbuf OUT VARCHAR2,
o_ret_code OUT NUMBER,
l_chr_from_date IN VARCHAR2,
l_chr_to_date IN VARCHAR2)
IS
l_chr_skip VARCHAR2 (1);
l_chr_task_exists VARCHAR2 (100);
l_chr_error_msg VARCHAR2 (4000);
l_num_tbb_id NUMBER;
l_num_request_id NUMBER := fnd_global.conc_request_id;
l_num_login_id NUMBER := fnd_global.login_id;
l_num_user_id NUMBER := fnd_global.user_id;
l_num_resp_id NUMBER := fnd_Profile.VALUE ('resp_ID');
l_num_otl_appl_id CONSTANT NUMBER (3) := 809; -- This is the appl_id for OTL, do not change
l_chr_proj_attr1 CONSTANT VARCHAR2 (7) := 'Task_Id';
l_chr_proj_attr2 CONSTANT VARCHAR2 (10) := 'Project_Id';
l_chr_proj_attr3 CONSTANT VARCHAR2 (16) := 'Expenditure_Type';
l_chr_proj_attr4 CONSTANT VARCHAR2 (19) := 'Expenditure_Comment';
l_chr_proj_attr5 CONSTANT VARCHAR2 (23) := 'SYSTEM_LINKAGE_FUNCTION';
i_num_count NUMBER;
i_num_rows_inserted NUMBER := NULL;
l_chr_message fnd_new_messages.MESSAGE_TEXT%TYPE;
l_chr_hdr_eligible VARCHAR2 (5);
l_tbl_timecard_info hxc_self_service_time_deposit.timecard_info;
l_tbl_attributes_info hxc_self_service_time_deposit.app_attributes_info;
l_tbl_messages hxc_self_service_time_deposit.message_table;
l_new_timecard_id NUMBER;
l_new_timecard_ovn NUMBER;
l_num_time_building_block_id hxc_time_building_blocks.time_building_block_id%TYPE;
I NUMBER; --PENDING REMOVE
l_message VARCHAR2 (2000); --PENDING REMOVE
l_time_building_block_id NUMBER; --PENDING REMOVE
CURSOR process_line
IS
SELECT ROWID ROW_ID, a.*
FROM xxpowl.xxpowl_hxt_otl_intf a
WHERE 1 = 1 --a.request_id = l_num_request_id
AND a.status_flag = 'NEW' -- 'VALID'
AND a.error_desc IS NULL
AND a.service_activity_type IS NOT NULL;
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered From Date:'
|| (TO_DATE ( (l_chr_from_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered To Date:'
|| (TO_DATE ( (l_chr_to_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_GLOBAL.APPS_INITIALIZE (user_id => l_num_user_id,
resp_id => l_num_resp_id,
resp_appl_id => l_num_otl_appl_id);
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Inserting the data in the custom table XXPOWL_HXT_OTL_INTF');
INSERT INTO xxpowl.XXPOWL_HXT_OTL_INTF (SR_NUMBER,
PROJECT_TASK_OWNER,
PROJECT_TASK_OWNER_PERSON_ID,
PROJECT_ID,
PROJECT_TASK_ID,
ASSIGNEE,
ASSIGNEE_ID,
ASSIGNEE_PERSON_ID,
ASSIGNEE_SUPERVISOR_PERSON_ID,
TASK_NUMBER,
PARENT_TASK_NUMBER,
DEBRIEF_NUMBER,
DEBRIEF_HEADER_ID,
DEBRIEF_DATE,
TASK_ASSIGNMENT_ID,
DEBRIEF_OBJECT_VERSION_NUMBER,
DEBRIEF_PER_COMPLETE,
DEBRIEF_LINE_ID,
DEBRIEF_PROCESS,
SERVICE_ACTIVITY,
SERVICE_ACTIVITY_TYPE,
INVENTORY_ITEM_ID,
ITEM,
BUSINESS_PROCESS_ID,
DEBRIEF_TRANSACTION_TYPE_ID,
DEBRIEF_UOM_CODE,
DEBRIEF_HOURS,
CONV_DEBRIEF_IN_HOURS,
DEBRIEF_START_TIME,
DEBRIEF_END_TIME,
DEBRIEF_SERVICE_DATE,
NOTES,
OTL_ELIGIBLE_FLAG,
NOTIF_SENT_FLAG,
NOTIF_ELIGIBLE_FLAG,
ERROR_DESC,
STATUS_FLAG,
INITIAL_NOTIF_SENT_DATE,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
REQUEST_ID,
INITIAL_REQUEST_ID)
(SELECT b.incident_number sr_number,
h.resource_name project_task_owner,
h.source_id project_task_owner_person_id,
b.external_attribute_1 project_id,
b.external_attribute_2 project_task_id,
jtf_task_utl.get_owner (d.resource_type_code, d.resource_id)
assignee,
d.resource_id assignee_id,
jrre.source_id assignee_person_id,
paa.supervisor_id assignee_supervisor_person_id,
c.task_number task_number,
(SELECT task_number
FROM jtf_tasks_b z
WHERE c.parent_task_id = z.task_id)
parent_task_number,
a.debrief_number,
a.debrief_header_id debrief_header_id,
a.debrief_date debrief_date,
a.task_assignment_id task_assignment_id,
a.object_version_number debrief_object_version_number,
a.attribute1 debrief_per_complete,
e.debrief_line_id debrief_line_id,
cbp.name debrief_process,
cttv.name service_activity,
DECODE (cttv.attribute1,
'Y', 'Service-Billable',
'N', 'Service-Non Billable')
service_activity_type,
e.inventory_item_id inventory_item_id, --f.segment1 item,
(SELECT segment1
FROM mtl_system_items_b f
WHERE e.inventory_item_id = f.inventory_item_id
AND f.organization_id = b.inv_organization_id)
item, --241 --Mater Org
e.business_process_id business_process_id,
e.transaction_type_id debrief_transaction_type_id,
e.uom_code debrief_uom_code,
e.quantity debrief_hours,
(g.conversion_rate * e.quantity) conv_debrief_in_hours,
e.labor_start_date debrief_start_time,
e.labor_end_date debrief_end_time,
e.service_date debrief_service_date,
(SELECT note_tl.notes
FROM JTF_NOTES_B NOTE, JTF_NOTES_TL NOTE_TL
WHERE NOTE.JTF_NOTE_ID = NOTE_TL.JTF_NOTE_ID
AND NOTE_TL.LANGUAGE = USERENV ('LANG')
AND NOTE.SOURCE_OBJECT_ID = a.DEBRIEF_HEADER_ID
AND note.jtf_note_id =
(SELECT MAX (note1.jtf_note_id)
FROM JTF_NOTES_B note1
WHERE NOTE1.SOURCE_OBJECT_ID =
a.DEBRIEF_HEADER_ID))
notes,
'Y',
'N',
'X',
NULL,
'NEW',
NULL,
SYSDATE,
l_num_user_id,
SYSDATE,
l_num_user_id,
l_num_login_id,
l_num_request_id,
l_num_request_id
FROM csf_debrief_headers a,
cs_incidents_all_b b,
jtf_tasks_b c,
jtf_task_assignments d,
csf_debrief_lines e, --mtl_system_items_b f,
mtl_uom_conversions g,
jtf_rs_resource_extns_vl h,
cs_business_processes cbp,
cs_transaction_types_vl cttv --, cs_sr_task_debrief_notes_v notes
jtf_rs_resource_extns_vl jrre,
per_all_assignments_f paa
WHERE a.task_assignment_id = d.task_assignment_id
AND d.task_id = c.task_id
AND c.source_object_id = b.incident_id
AND c.source_object_type_code = 'SR'
AND a.debrief_header_id = e.debrief_header_id
AND e.uom_code = g.uom_code
AND g.uom_class = 'Time'
AND b.incident_owner_id = h.resource_id(+)
AND e.business_process_id = cbp.business_process_id
AND e.transaction_type_id = cttv.transaction_type_id
AND d.resource_id = jrre.resource_id
AND jrre.source_id = paa.person_id --= 181
AND TRUNC (SYSDATE) BETWEEN paa.effective_start_date
AND paa.effective_end_date
AND TRUNC (e.last_update_date) BETWEEN TO_DATE (
(l_chr_from_date),
'YYYY/MM/DD HH24:MI:SS')
AND TO_DATE (
(NVL (
l_chr_to_date,
l_chr_from_date)),
'YYYY/MM/DD HH24:MI:SS')
AND NOT EXISTS
(SELECT 1
FROM xxpowl.XXPOWL_HXT_OTL_INTF old
WHERE old.debrief_header_id =
e.debrief_header_id
AND old.task_number = c.task_number
AND TRUNC (old.DEBRIEF_SERVICE_DATE) =
TRUNC (e.SERVICE_DATE)
AND old.DEBRIEF_TRANSACTION_TYPE_ID =
e.TRANSACTION_TYPE_ID
AND old.request_id <> l_num_request_id
AND old.DEBRIEF_UOM_CODE = e.uom_code
AND old.DEBRIEF_HOURS = e.quantity));
i_num_rows_inserted := SQL%ROWCOUNT;
fnd_file.put_line (fnd_file.LOG,
'No of rows Inserted:' || i_num_rows_inserted);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| 'Error while Inserting debrief lines data into custom table.Error: '
|| SQLERRM
|| '. Exiting the interface without processing further';
fnd_file.put_line (fnd_file.LOG, l_chr_error_msg);
ROLLBACK;
RETURN;
END;
FOR process_line_rec IN process_line
LOOP
l_chr_error_msg := NULL;
l_tbl_timecard_info.delete;
l_tbl_attributes_info.delete;
l_tbl_messages.delete;
l_new_timecard_id := NULL;
l_new_timecard_ovn := NULL;
l_num_time_building_block_id := NULL;
l_chr_message := NULL;
i_num_count := 0;
l_num_tbb_id := NULL;
BEGIN
hxc_timestore_deposit.create_time_entry (
p_measure => process_line_rec.conv_debrief_in_hours,
p_day => TO_DATE ( (process_line_rec.debrief_service_date),
'DD/MM/RRRR'),
p_resource_id => process_line_rec.assignee_person_id,
p_comment_text => process_line_rec.notes
|| '....Remove this notes in the code logic....Request Id:'
|| l_num_request_id, --pending lokesh
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_time_building_block_id => l_num_time_building_block_id);
fnd_file.put_line (
fnd_file.LOG,
'Step#1 completed, TIME_BUILDING_BLOCK_ID:'
|| l_num_time_building_block_id);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#1 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Classify Time
-- Attribute1
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Task_Id',
p_attribute_value => process_line_rec.project_task_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#2 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute2
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Project_Id',
p_attribute_value => process_line_rec.project_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#3 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute3
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Type',
p_attribute_value => 'Service-Billable',
-- p_attribute_value=> 'Service-Non Billable',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#4 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute4
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Comment',
p_attribute_value => 'Expenditure Comment created by API',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#5 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute5
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'SYSTEM_LINKAGE_FUNCTION',
p_attribute_value => 'ST',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#6 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
hxc_timestore_deposit.execute_deposit_process (
p_validate => FALSE,
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_messages => l_tbl_messages,
p_mode => 'SAVE', -- p_mode-> 'SUBMIT', 'SAVE', 'MIGRATION', 'FORCE_SAVE' or 'FORCE_SUBMIT'
p_deposit_process => 'OTL Deposit Process',
p_timecard_id => l_new_timecard_id,
p_timecard_ovn => l_new_timecard_ovn);
COMMIT;
hxc_timestore_deposit.log_messages (p_messages => l_tbl_messages);
IF (l_tbl_messages.COUNT <> 0)
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
fnd_file.put_line (
fnd_file.LOG,
(l_tbl_messages (i_num_count).message_name));
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'**** Error.....Inside Exception Block in execute_deposit_process');
BEGIN
hxc_timestore_deposit.log_messages (
p_messages => l_tbl_messages);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'*****Error....Inside Exception Block in hxc_timestore_deposit.log_messages.Error:'
|| SQLERRM);
END;
l_chr_error_msg :=
l_chr_error_msg
|| 'Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
IF (l_tbl_messages.COUNT <> 0)
THEN
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
END;
COMMIT;
IF l_chr_error_msg IS NOT NULL OR l_new_timecard_id IS NULL
THEN
fnd_file.put_line (fnd_file.LOG,
'***** Error *****' || l_chr_error_msg);
o_ret_code := 1;
END IF;
BEGIN
fnd_file.put_line (
fnd_file.LOG,
'Updating the status of the record in custom table for debrief_line_id:'
|| process_line_rec.debrief_line_id);
UPDATE xxpowl.XXPOWL_HXT_OTL_INTF
SET status_flag =
DECODE (
l_chr_error_msg,
NULL, DECODE (
l_new_timecard_id,
NULL, 'FAILED',
DECODE (SIGN (l_new_timecard_id),
'1', 'SUCESS',
'FAILED')),
'FAILED'),
time_building_block_id = l_new_timecard_id,
last_update_date = SYSDATE,
request_id = l_num_request_id,
last_updated_by = l_num_user_id,
error_desc = l_chr_error_msg
WHERE ROWID = process_line_rec.row_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error while updating the status to SUCCESS.Error: '
|| SQLERRM;
END;
END LOOP; --process_line
EXCEPTION
WHEN OTHERS
THEN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Unknown/Unhandlled Exception Error......' || SQLERRM);
o_ret_code := 2;
END main_process;
SHOW ERR;
Error Messages:
1. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_ROLLBACK_TIMECARDS_PK) violated.
2. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_LATEST_DETAILS_FK) violated
Thanks a lot for the help!Hello
We will get this error message when we run this from application other than "Time and Labor Engine". So try to run this concurrent program (if you registered as a conc. program) from Time and Labor Engine application.
--Lokesh -
Error while creating the proxy object to connect to a third party tool.
Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM -
Error when creating a Proxy Object from WSDL
Hi,
when creating a proxy object in abap based on the [WSDL|http://download.mapandguide.com/EN/dev/xserver/XLocate-1.6.0.3.wsdl] i get the error 'Incorrect value: Unknown Type Referencens0:ArrayOfString'.
1- Is there a conflict with the type 'String' that's also a type in ABAP
<complexType name="ArrayOfString">
<sequence>
<element name="String" type="xsd:string" minOccurs="0" maxOccurs="unbounded" nillable="true" />
</sequence>
</complexType>
2- Is it a name space problem?
xmlns:ns0="http://types.xlocate.xserver.ptvag.com"
type="ns0:ArrayOfString"
3- Something else?
Please Help!
Thank
FouadHi Isaias,
we are working with this versions:
SAP_BASIS 700 0015 SAPKB70015 SAP Basiskomponente
SAP_AP 700 0013 SAPKNA7013 SAP Application Platform
We are not working with developer studio, only with the regular tools of the abap development workbench Transaction SE80.
Thanks,
Fouad -
Error Dump Creating a Transformation Object
Hi all:
I have NW2004s in my box.
I have the following error when trying to create a Tranformation Object (function "Create Transformation" on a Data Source).:
"Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx are installed on your computer....".
Installation went ok, with no errors, so I don't know why the system is asking for additional files.
If so, what should I do?...What should I check?
Thanks in advance.You don't have access to :
http://service.sap.com/notes
or SAP Notes through CSS ?
Then, it will be difficult as some notes have corrections that need to be implemented and you do need the access.
Best Regards,
Snehal
Maybe you are looking for
-
Credit memo on asset in closed financial year
Hi, Is there any standard solution for the following case. - An Asset was capitalized and also depreciated in the last year. This year was closed in FA already and cannot be nothing posted there. - Now I need to credit this asset and have depreciati
-
Why i cannot turn my display after upgrading to iOS 8.0
after upgrading my iPad to ios 8.0 the picture in the picture in the display is fixed when i turn the iPad . i need a fix to this .
-
Customer Dunning printout - missing columns
Hi, I have tried using F150 to run customer dunning. The sapscript attached F150_BE_DUNN_01 for printing of dunning form. However, 3 columns are missing from form - Doc no, currency and amount. I'm using the standard form given. Pl advised.
-
How to reveal vectors in PDF file.
I've got a PDF file composed entirely of vector paths. Since the image was too large for the screen the document was saved as an 8.5x11" file, even though the remaining parts of the image are there. However, I can't seem to reveal them by deleting th
-
How to implement pattern matching in RFC input paramenter?
Dear Friend....... I have a requirment for implement a pattern match for name field of vendor in one of RFC......... For ex.......... Name field:- A* -> give all list of name starting with a. how can we implement this? Any way............Suggest me