"Error in data selection" while loading
hi,
while loading data from one ODS to another(datamart) I, after extraction of some data packages successfully I m getting an error:"Error in data selection"
i saw its help messages were
1)error 7 when sending an idoc
2)sql error in accessing table no 13
3)error in source system
in the source ods i have loaded thru init from R/3..
please help
Hi,
Take a look on the cosulting note : 610938.
In place of R/3 system you have to consider BW itself when you are reading the note.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Hi experts,
I have added a field to 0emp_attr data source using DS enhancements, when trying to extract with full the job is getting failed stating " error in data selection".Hi,
Just see following thing
1. Try to extract data in R/3 in RSA3 transaction.If it is working correctly no issue
2. If RSA3 throw issue check the definition of your code and try to debug it.
3. If RSA3 is fine check your Infopackage selection settings if it is ok or there is any error,If there is any selection try to remove it and load data.
Thanks and regards -
Cube to Cube "Error in data Selection" plz help
Hi this is Ajay Reddy
when am sending data from Cube to Cube am getting an error
"Error in data Selection" plz helpHi,
It needs a Note implementaion. I got similar problem in version BIW 7 and SP 11. We got the solution with on of the note . I am not able to recollect the note number.
Any way check the notes 920971,155471 may help you or not.
With rgds,
Anil Kumar Sharma .P -
Error in data selection of Infopackage
Hi,
My infopackage is failing with "Error in data selection". RSM 340 is the error message number.
Datasoucre: 0FI_AP_4
I have checked
1. Timestamp--consistent
2.Reactivated and replicated datasource
3.Checked SM58 in both BW and source systems and found it OK
I have taken Source jobs for 1 succesfull infopackage run and 1 unsucessfull infopackage run.
I see that Job log for unsucessfull has no call to customer enhancement and no data selection is done thereby.
i am attaching the job logs for 1 successful and 1 unsuccessful case. Please check and let me know the gap that is contributing to this error.Hi nayab,
You and harish works at same location?
i seen same issue from harish as well.
http://scn.sap.com/thread/3578278
Thanks -
Error in Printer Selection while print the document
Dear All,
Error in Printer Selection, while print the document in Quotation.
Also both side Printing is not happening.
My Report is in Crystal Report format.
Suggest any solution on this as earlier as possible.
Regards,
Sumeet Vaityhi,
are you printing locally or shared printer?
pls check the ff.
1. make sure your printer is on and Online (For local and shared)
2. make sure the host PC is connected in the network., ping the host PC to make sure your host PC is Connected (Shared)
3. make it as your default printer.
regards,
Fidel -
Error occured in the data selection while extract data from Source system
Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With errorHi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star -
Invalid Number Error for Decimal Field While Loading Data
I am loading a delimited text file using the SQL* loader however I am reciving an error in my decimal fields. When a decimal field only has leading zeros before the decimal point I receive invalid number error. Below will clarify:
i.e.) 00000000.30 [*Invalid number*]
i.e.) 00046567.45 [*Valid number*]
i.e.) 00000001.00 [*Valid number*]
I've tried setting the precision/scale in the table, tried declaring it a decimal field instead of number, none of these methods fixed the issue. Any help I would really appreciate.
POLICY_NUMBER NUMBER,
EFFECTIVE_DATE DATE "YYYYMMDD" NULLIF EFFECTIVE_DATE = '',
TRANSACTION_DATE DATE "YYYYMMDD",
TRANSACTION_AMOUNT DECIMAL EXTERNAL, -- Tried TRANSACTION_AMOUNT DECIMAL EXTERNAL (10) & TRANSACTION_AMOUNT NUMBER
MF_TRX_CODE NUMBER,
USER_ID CHAR,
GROUP_NUMBER NUMBER,
EXPIRATION_DATE DATE "YYYYMMDD" NULLIF EXPIRATION_DATE = '',
BILL_NUMBER NUMBER,Any help is greatly appreciated. Thanks before hand.Hi,
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> SELECT * FROM TEST;
TRANSACTION_AMOUNT
SQL> SELECT * FROM TEST;
TRANSACTION_AMOUNT
11000,00
293,37
2000,00
1134,32
0,30
SQL>Between the selects I loaded the table with sql*loader using...
Load Data
INFILE *
APPEND
INTO TABLE TEST
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
TRANSACTION_AMOUNT DECIMAL EXTERNAL
BEGINDATA
00011000.00
00000293.37
00002000.00
00001134.32
00000000.30The log is
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Dec 23 17:23:47 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: test.ctl
Data File: test.ctl
Bad File: test.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table TEST, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
TRANSACTION_AMOUNT FIRST * | CHARACTER
Table TEST:
5 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 16512 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 5
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Tue Dec 23 17:23:47 2008
Run ended on Tue Dec 23 17:23:50 2008
Elapsed time was: 00:00:02.86
CPU time was: 00:00:00.06Regards, -
Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks -
Error in ALPHA conversion while loading hierarchies
Hi,
I got the following error while loading hierarchies:
<i>Error in ALPHA conversion in NodeId00000088 for InfoObject 0PROFIT_CTR
Message no. RH224
Diagnosis
The technical node name for node id 00000088 is not consistent for conversion exit ALPHA, which is stored with InfoObject 0PROFIT_CTR.
Possible reasons for the error:
The original consistent value returned by the DataSource was changed by a conversion routine to a non-consistent conversion exit value.
The DataSource returns a value that is not consistent in the conversion exit.
System response
Loading the hierarchy was terminated.
Procedure
Check whether the correct conversion exit was entered for the InfoObject. If necessary, change the conversion exit, conversion routine or the data to be extracted.
A further option is to activate automatic conversion in the transfer rules. Here, the system executes the conversion exit, making sure that the data is in the correct format.</i>
If it is not hierarchies, we fix this error by prefixing the zeros (as we are working on Qbox we wont change the transfer rules to select the conversion routine) but here there is no PSA, the data is coming from ALE. Based on this please suggest me to how to fix this error?
Points will be given for any helpful suggestionGanesh,
Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
There might be some inconsistencies in the code..
Hope it helps
Gattu -
Error in Data selection in R/3 Generic Extraction Using function Modules
Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know itHi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea. -
Uknown Error in update rules while loading into InfoCube
I load data from BC 0FIAR_O03 ODS into BC 0FIAR_C03 ICube.
While loading I got error on second data package (1st package loading ok)
The error message in monitor informs about error in update rules.
I got nothing special than I looked into Application Logs (tcode SM21). It tells about message 560 with addition "no documentation exists for message 00560"...
I can't get what's wrong. The update rules for ICube is BC without any modifications and data loaded succefully into ODS.... Any ideas?? Where I can find more inforamtion about error occured during update??update rule terminated if data load contains more than 1 data package. don't know why. I solved problem by spliting load process by Fiscal Year ranges
-
Changing master data record while loading Transaction data
Hello All,
We have a requirementt to change one of the master data field(FLAG) while loading on the transaction data.
we get the material info in the Master data. and in the sales order item data also we get the material.
While loading the Transaction data, I have to set a FLAG field has "s" in the Master data material based on the Key selection:
Master data - MAterial = Tramsaction - Data Material.
I have written the code.. and implemented.. i get the correct records but i face huge performance issue. can any one guide me please
DATA: itab1 TYPE STANDARD TABLE OF /bi0/pmaterial,
wa_itab1 TYPE /bi0/pmaterial,
w_tabix TYPE sy-tabix.
IF itab1 IS INITIAL.
SELECT * FROM /bi0/pmaterialINTO TABLE itab1.
ENDIF.
LOOP AT result_package ASSIGNING <result_fields>.
READ TABLE itab1 INTO wa_itab1 WITH KEY
material = <result_fields>-material.
IF sy-subrc = 0.
w_tabix = sy-tabix.
IF <result_fields>-/bic/paa1c2033 IS NOT INITIAL.
wa_itab1-FLAG = 'S'.
MODIFY itab1 FROM wa_itab1 INDEX w_tabix TRANSPORTING FLAG .
ENDIF.
ENDIF.
ENDLOOP.
IF itab1 IS NOT INITIAL.
MODIFY /bi0/pmaterial FROM TABLE itab1.
ENDIF.Here are some performance tips:
Add FOR ALL ENTRIES IN result_package WHERE material = result_package-material to your select statement
After your select statement, add IF SY-SUBRC = 0. SORT itab1 BY material. ENDIF.
In your read statement, add BINARY SEARCH to the end of it
At the end of your end routine, make sure to CLEAR itab1.
You can also increase the number of parallel processes for your DTP, and DSO activation (assuming your target is DSO). -
Date problem while loading the data
Hi Guys,
When we are extraction the data from the DataSource 0CRM_SALES_ACT_1, it is giving an error for 0calday.
If the date is greater than 2012, it is giving an error. i.e., it is taking date upto 31.12.2012. If the date is greater than that date is giving an error as "date is later than factory calendar definition".
In that case we are modifying the date in the PSA and make date less than 2013 and loading the data.
Even we have done Transfer Global setting at the source system and we checked the factory calendar in SCAL tcode it is setup to 2098.
Can you please advice how to solve the problem when we are loading the date which is greater than 31.12.2012.
Thanks in advance
JaganHi Jagan,
In the info package selections tab.
for 0CALDAY field give to value as 31.12.9999 and try loading you will get all the records
Regards,
Venkatesh -
CDC Error (JOURNALIZED DATA is not loading into tartet database)
HI,
I have enabled source database for CDC and got green mark on source database model tables.
while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
when I run the package/ interface JOURNALIZED DATA is not loading into target database.
i have implemented cdc for 7 source table.
and using JKM MSSQL Simple
and enable JOURNALIZED DATA in interface level.
and
source database is : MSSQL Server
Target Database : Oralce 11g.
please advice me.
thanks in advance.
Zakeer HussainZakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
Still not able to figure out please tell us which step the data is not flowing through we will try to guide you. -
Error: No data available while executing BEx query
Hi BI expert,
Please help me out as I am very new in BI. I am getting error "No data available" after executing query in BEx query designer.
thanksHi,
Pl check for the Filter Conditions of the query.Have the same filters data as that in the Cube/ODS.
Hw is the Data Flow ???
A)From ODS to Cube to Query ????
or
B)From ODS
or
C)From Cube
1)Check on which Infoprovider the Query is built.
2)If it is Cube then Check the data in the Cube.Right click Cube ,Display data and Execute.
3)If data is avaliable in cube then it shud come in Query except for the Filter conditions .
4)then check for the Filter conditions of the query.
5)If data is not avaliable in Cube then check in ODS ????
6))If data is not avaliable in ODS then check in PSA
7))If data is not avaliable in PFA then check in R/3.
Also search in SDN as to how the Data flows
A) both from Flat File and
B)R/3 and FULL and DElta Load.
That will give clear uinderstanding !!!!!
Rgds
SVU123
Edited by: svu123 on Dec 15, 2008 2:15 PM
Maybe you are looking for
-
My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipa
-
My 30 GB COLOR IPOD has blue lines going across it????
For about a month now, my ipod screen switches in and out of an appropriate screen and another time it will light up and have only blue lines going across it... How do I fix this?
-
Material determination with outcome B
Hi all, We are using material determination functionality. Automatic reason with Outcome B. As per SAP help, the Material is determined at SO level and it is copied over to DO . No availability check in DO and material is not redetermined at DO.This
-
Consuming webservices using CF8
I recently upgraded to CF8 and I'm not able to consume webservices from my dev edition on my personal PC. I have tried making my own simple test webservice, but I'm not able to consume them using CF. (I'm able to consume the ws using .Net or Java, bu
-
Can't get printers to print after installing new modem
I just installed a new wireless modem. My 2 printers are the OfficeJet 6500 E709N and C7200, operating on Windows 7-64. Both printers are connected to the network, both say they are ready to print, but when I try to print I get an error "Printer-stat