Error in Info package using BI 7, nw2004s

Hi BW Gurus,
I had problem in creating Infopackage.  Error messages are:
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted
please help is solving this.
Ravi

have you checked we02 or bd87 for IDOC Types in error status? (like Basic Type RSREQUST)
please also checkout SM58 for tRFC errors
Edited by: Nesimi Buelbuel on Nov 4, 2008 6:00 PM

Similar Messages

  • How to set request number of info package using start routine

    Hi All,
    I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
    Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
    Thanks
    Sangita

    You'll probably want to do this in a start routine.  It is probably not advisable to hard-code the technical name of the InfoPak.  They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
    I would do a SQL select like this in a start routine, and then filter based on the results of the SQL.  You'll probably want to sort the results by date and time, both descending.  Or do a MAX in the SQL.
    Please let me know if this isn't clear.
    select q~rnr q~logdpid q~tdatum q~tuzeit
    from rsreqdone as q
      inner join rsldpio as p
        on p~logdpid = q~logdpid
    where p~objvers = 'A'
    and p~logdpid like 'ZPAK%'
    and p~source = 'your data source'

  • Errors in info package

    hi friends,
    please some one can explain me the errors occurs in info package like referential integrity failures, due to locks, etc.
    please some one explain about this points.
    thanks in advance.

    Hi sreekanth,
    Referential Integrity: Its a DataBase concept which combines(logically) the data of multiple table with the master table. Here master table has the primary key and rest of the tables have the same key as forienkey.
    Here we use the characteristic (or combinations of Chars) call as referential char.
    check this.
    you might be knowing that generally refrential integrity is concerned with nothing but primary key and foriegn key relationship. Generally we use to check uniqueness of records.
    In sap we use it during flexible updation...to check the data records of transaction data and master data.
    In other words, to check before loading of data, that whether loading will be properly or not.
    we will check(tick) the option in the maintainance of the
    infosource--> communication structure
    it will be better if you clearly mention your problem, if further help is needed.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
    Referential integrity is the property that guarantees that values from one column depend on values from another column.This property is enforced through integrity costraints....
    see this link...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6d/117c5fd14811d2a97400a0c9449261/content.htm
    Please find the below url
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=referential%20integrity&cat=sdn_all.
    Enble the referential integrity at Communication structure***
    Locking Errors:
    1.These Locking error are due to If Some body using same Infopak when ur using that same Infopak.This is Not a major problem.
    2. If any Request has lock u can Unlock that by using se03.
    ***Assign Points If Helpful****
    Thanks,
    kiran.

  • Process Chain error during info package execution

    I'm trying to load master data into 0CURTYPE using process chain.
    I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
    On scheduling the process chain I get an error during the execution of the info package
    "Could not find code page for receiving system
    For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
    Is it relatred to some setting whihc I have missed out?
    Any help on this please?
    Thanks,

    Hi, this is a issue related to idocs in the source....
    U can contact ur BASIS team to solve this...
    From their end they have to chk the unprocessed/errored idocs in BD87...
    this issue belongs to source...
    They have to run a report:RBDAGAIN  to process the errore idoc's in the source which are in STATUS:'02'.
    This is a solution for temporarilrly basis...
    if this occurs regularly they have to change the settings in SM59..
    refer exact note for this: 784381
    rgds,

  • Problem while scheduling info package using HR datasource.

    hi experts,
    while scheduling the info package i am getting the following error.
    Delete init. request
    REQU_D340A67OSEQ9A6Q2B20X9SIOM before running
    init. again with same selection
    I think by deleting the setup it will work...
    am i right or is there any other solution for this problem..
    please reply soon.
    its too urgent.
    thanks n regards.
    uday shankar.

    Hi,
    You are correct there is no setup table concept in HR extractors.
    But there is a cache. Usually HR extractions will be full load. But it also supports delta. There is no setup table concept in HR.Once you perform your init (with or without Data transfer your delta path is set and delta will follow else can go for Full loads alone. It will extract data from the relevant tables like generic extractors. The data will be filtered based on the selection parameters.
    Except for payroll and time management rest all sub-functional areas supports only full load.
    In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
    Auditing Information Technical name: 0HR_PY_PP_1
    http://help.sap.com/saphelp_nw70/helpdata/EN/c7/532d7835db9a41b744aea58ed699ed/frameset.htm
    Delta Update
    This DataSource supports delta updates. The source system fills table HRMS_BIW_PPDELTA with the date and time of the first data transfer (initialization) and the date and time of all subsequent data transfers. This information enables the system to perform a delta transfer. It only selects posting runs with the above statuses whose last changed on date is after the date in table HRMS_BIW_PPDELTA.
    If you use DataSources 0HR_PY_PP_2 (Posting Documents) and 0HR_PY_PP_1 (Auditing Information), you must transfer data to BW from both DataSources using the same selection criteria.
    Also
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
    https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
    /people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
    step by step
    https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
    HR extraction:
    The HR module enables customers to effectively manage information about the people in their organization, and to integrate that information with other SAP modules and external systems
    HR broadly has the following modules:
    PA (Personnel Administration) and Organization Management
    Personnel Development
    Payroll Accounting
    Time Management
    Compensation
    Benefits
    Training and Events
    The Personnel Administration (PA) sub module helps employers to track employee master data, work schedules, salary and benefits information. Personnel Development (PD) functionality focuses on employees' skills, qualifications and career plans. Finally, the Time Evaluation and Payroll sub modules process attendance and absences, gross salary and tax calculations, and payments to employees and third-party vendors
    HR delivers a rich set of business content objects that covers all HR sub-functional areas.
    How the data extraction happens:
    Before getting into how the data gets populated into HR info cube
    Let's understand the term info type
    "An info type is a collection of logical and/or business-related characteristics of an object or person"
    Here the data will be extracted from an info type (PA, PD, time management etc) and for few other applications it is from the cluster tables (Payroll, compensation etc.)
    HR is basically master data centric because it is always related to people related Info Objects, such as Employee, Person. In most of the cases HR master data is defined as Time Dependent to enable historical evaluation. HR R/3 system records a specific period of validity for each Info type.
    Procedure to extract the HR data:
    Activate Data Sources in the Source system (R/3)
    Replicate Data Sources in BW system:
    Activate business contents in BW.
    Populate HR cubes with data by scheduling info packages.
    Note: Master Data should be loaded first
    Except for payroll and time management rest all sub-functional areas supports only full load.
    In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
    Check the below links for more information
    Technical Considerations in Global SAP BW/HR Implementations
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/505351fe-ec8c-2910-c5b5-a43bbf53f6fc
    BW/HR Implementation
    https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
    Hope this helps.
    Thanks,
    JituK

  • How to control data load in Info-Package using ABAP?

    Hello Gurus:
    I am trying to resolve couple of issues. 
    1.  I need to load data DAILY Full Load into a Planning cube.  I have the 0NETDUEDATE   for selection in the
         Info-package.  I am getting data from anothe base A/R cube.  I want to Load Daily ONLY those records
         for which the "0NETDUEDATE" is Greater than "System Date".  I think the logic would be IF 0NETDUEDAT
         .GT. SYS-DATUM, bruing the record. What should be the statement in 'Result' for keeping the record? 
         (I don't know ABAP, so need help here...!)
    2.  Similalry, before loading the data above, I want to delete all the existing records from Planning cube where
         0NETDUEDATE is GT System date (records loaded the previosu day need to be deleted as the amounts may
         have changed).  How can I achieve this selective deletion automatically  in PC??
    Appreciate your feedback very much.
    Thanks... SMaa

    Hi Shruti,
    1) If i understand your requirement correctly you need to load only data which has 0NETDATE greater then sydatum.
    So you can do this in infopackage .Infopackage>Data selection->0NETDATE(field)-->type(colum).here you can selecy ABAP type(6).Now you create ABAP code in this.
    Here in ABAP code you need to specify high and low range ,Also the relation character like GT or BT(between).
    i guess some how ur code will look like this
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    $$ end of global - insert your declaration only before this line   -
        InfoObject      = 0NETDUEDATE
        Fieldname       = NETDUEDATE
        data type       = NUMC
        length          = 0000010
        convexit        = PERI6
    form compute_NETDUEDATE
      tables l_t_range structure rssdlrange
      changing p_subrc like sy-subrc.
          Insert source code to current selection field
    $$ begin of routine - insert your code only below this line        -
    data: l_idx like sy-tabix.
              l_idx = sy-tabix.
              l_t_range-low = sy-datum.
              l_t_range-option = 'GT'.
              modify l_t_range index l_idx.
              p_subrc = 0.
    $$ end of routine - insert your code only before this line         -
    endform.
    i am not sure about coding but you can surely do it it is like specifying the ranges dynamically(you need to try it out)
    (also as mentioned by others you can do this in traansformation routines)but infopackage routine you can directly write in PROD system.
    2) And regarding the Selective deletion you donu2019t have nay process type in Process chain which does this
    But there is function module u201C rsdri_infoprov_delete " which can be used to develop a program( I guess you must be having a existing ZProgram in ur system already available because this is used commonly.
    Other wise you need to develop a ZProgram for this.
    Thanks and Regards
    Arun

  • Error in Info Package running.

    Hello Experts,
    When I am running a info package of data source 0Employee_Attr , request becomes red after some time and it gives a message at monitor screen on detail tab that:
    "Error occurred in the data selection" .
    How could I resolve it.
    with regards,

    Avenai - wrong forum for this. This would be better placed in the Extractors forum.

  • Error installing a package using yaourt

    Not sure if this is the place to post this or not.  My previous experience with yaourt (before my HD died and I had to reinstall), I didn't have this issue, and I wasn't able to find any references to this in the wiki, forum, or on the yaourt page (both the usage page and the AUR listing).  I run yaourt as follows:
    $ yaourt -Syv --aur pacman-color
    and I get the following error:
    /usr/bin/pacman: unrecognized option '--aur'
    is there something I'm missing?  I tried moving the --aur to various places, like before the -Syv, or after pacman-color, but it resulted in the same error.  I'm using the current yaourt and package-query (as of tonight), and pacman 3.4.0. Thanks in advance for any help.
    David
    [email protected]

    I've installed yaourt and '-Syu' seems to work while '-Syv' returns an error. 'pacman -Syv' works.
    [karol@black test]$ yaourt -Sy --aur
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    Last edited by karol (2010-07-15 06:32:49)

  • Data selection in info package using ABAP routine.

    Hi,
    when we are  scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO  Sy-Datum),in the selection tab in schedule i want to write the abap routine (type 6).please can any one have this type of code please sedn to me asap.
    this is very urgent.delivery is tomorrow.

    hi Lekha,
    try following code.
    seems you post the same question twice, one posting is sufficient. and please don't forget to reward helpful answers.
    data: l_idx like sy-tabix.
    read table l_t_range with key
    iobjnm = '0CREATEDON'.
    l_idx = sy-tabix.
    DELETE l_t_range
    WHERE iobjnm = '0CREATEDON'.
    L_t_RANGE-SIGN = 'I'.
    L_t_RANGE-OPTION = 'EQ'.
    if not work, try
    L_t_RANGE-OPTION = 'BT'.
    BT = between
    last 6 month
    L_t_RANGE-LOW = sy-datum - 180.
    current date
    L_t_RANGE-HIGH = sy-datum.
    append l_t_range.
    modify l_t_range index l_idx.
    p_subrc = 0.
    $$ end of routine - insert your code only before this line -
    endform.

  • Error in Info Package - NOT able to be used as loading variant

    Hii All
    I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
    I am not able to understand why this error is coming ??
    Plz tell me how to resolve it ??
    I searched some documents but not cleared.
    Thanks in advance
    Neha

    Hi
    Create a new infopackage and try loading.
    You can also refer to
    [Full load ODS to ODS in a Process chain;
    [Process chain;

  • Error on SOA packaging using ant

    Hi,
    Im trying to deploy a SOA composite using Ant scripts. My composite refers to wsdl's present in mds. On trying to compile and package the composite, i get the below error. The same composite gets compiled when i try from JDev, can someone please help in letting me know if any configuration is to be done.
    +"+
    +[scac] not part of the command.+
    +[scac] Error redirected to /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/../tmp/SearchService.err+
    +[scac] info: Validating composite "/var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/SearchMaintenanceApplication/SearchService/composite.xml"+
    +[scac] info: Pass+
    +[scac] error: location {/ns:composite}(12,61): Parse of component type files failed, check the adf-config.xml file : "*java.lang.NoClassDefFoundError: oracle/security/jps/internal/api/credstore/CredstoreUtil:* oracle/security/jps/internal/api/credstore/CredstoreUtil"+
    +[antcall] Exiting /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/build.xml.+
    +[antcall] Exiting /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/build.xml.+
    +[antcall] Exiting /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/build.xml.+
    +"+
    Thanks,
    Edited by: user526495 on Jul 16, 2012 2:54 PM

    Hi,
    404 response indicates that soa-infra is not running in the host:port/gdiora001.in.ibm.com, port:7001
    Pl make sure that you have soa-infra running in that host/port.
    http://host:port/soa-infra
    For the logs,
    you can find the soa server logs under $DOMAIN_HOME/servers/soa_server1/logs

  • Error in Info Package

    Hi Experts,
    Yes, i have one column 'unit' is blank. meaning no value in that column. how can i flag this error off? where shall i set?
    "Error in conversion exit
    CONVERSION_EXIT_CUNIT_INPUT"
    It seems i only have this error when i upload my file to the app. server and load thru the process chain.
    i dont encounter this error if i load my file from my local C drive, and without using the process chain.
    Why is it happen like this and why is it work differently whereas my file values remain the same?

    Hi,
            this error will occur when the file format is not matching to data source structure. check do you have all file permissions in your app.server(like read, write and delete). are you doing any changes to your flat file before loading data to BIW. if yes after changes dont open the file in excel and do not do any other changes if you do other changes the previous changes will not work. so make sure about the changes and check the file format with data source.
    Regards
    Sankar

  • Error while creating Info Package

    Hi,
    I am new to SAP-BW .Could anyone help me in fixing the following error .
    I have created an Info source for characteristic data and then trying to create a Infopackage to load master data , I have used the characteristic Material Number(IO-MAT) in this case .
    When creating the Info Package I got two data sources in the pop up , Material number (Master data)IO_MAT_ATTR and Material number (Texts) IO_MAT_TEXT .
    I was able to load data from a flat file into Data Source Material Number (Master data) But when I was trying to follow the same procedure and load the data for 'Material number(Texts) IO_MAT_TEXT' it gives me the following error .
    Select the Language field in the  source system -> Long Text
    I am not able to figure out and proceed further. Pls help me out.
    Regards
    Sudha

    I have another question..I was able to fix the error regarding info package but unable to load the data..(data load is being failed)
    In the DataSource/Transfer Structure I have LANGU , /BIC/ZB4_MAT (Material Number infoobject which i created) and TXTSH Fields ..
    the flat file which i used has Language, MaterialNumber,description pattern alone..
    (eg . E , M001,cookie ) and when i try to load this data..and  check in the Monitor - Administration Workbench..it shows as unsuccessful..
    The following error msg :
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    I could'nt see the long text of Help information...
    could you help me out in figuring out this..
    Points assigned for previous answer..
    Regards
    Sudha

  • Execute Business Add-in in Info-package

    Hi,
      I implemented the Business Add-in as a subsequent process. If I execute the info package, Business Add-In is executing. But, If I run the info package using the Process Chains, then the Business Add-In is not executing.
    Is there any special process to make the Business Add-In work in Process Chains?
    Your help is highly appreciated.
    Thanks,
    Trinadha

    Hi Trinadha,
    if you want to work with some ABAP code in your process chain, put your own code in a program and then include it as a subsequent process type...
    For details see in www.service.sap.com/bw -> SAP BW InfoIndex -> How to... Integrate an ABAP program into a process chain 3.x (pdf)
    Hope it helps (and please don't forget to assign some points by clickin on the yellow star to the contributors that help you !!!)
    Bye,
    Roberto

  • Run info package from an ABAP program

    Hi all,
    I need to run an info-package based on values entered by user in a selection screen.
    How can I implement these values in the info-package using the abap program?
    I've searched the forum and found FM RSSM_SDL_START_INFOPACKAGE and BAPI_IPAK_START but there is no option to enter the selections, also I have found the option to select var type 6 - abap code in the info-package (tab  data selection) but didn't understand if I can connect it to an external abap program.
    Thanks,
    Hagit

    Along with BAPI_IPAK_START, you need to use the FM "BAPI_IPAK_CHANGE"...
    there you have the table with structure BAPI6109SEL, which is used to pass selections to infopackage at the run time...
    Sequence u can use is BAPI_IPAK_START, then BAPI_IPAK_CHANGE and finally BAPI_IPAK_START as per ur requirements...

Maybe you are looking for