Error in MIRO posting for credit memo in return PO

Dear Sir,
I have made a return PO for Vendor rejection.Then made a good return for the same with 161.Then post the excise return through JV J1IS. But when I am posting the Credit Memo for vendor system showing the Error - RG23D Part 2 has not been done yet.
But on the other hand the excise has been posted in J1IV and part 2 can be seen in material document in excise tab.
Then why system is showing the above said error. Please suggest for the same.
Regards,
Sandip Sahu
Edited by: Jeyakanthan A on Nov 17, 2011 10:42 PM

Hi
system showing the Error - RG23D Part 2 has not been done yet.
R u sure you are getting this error?
As per me in register Rg23D there is no Part2 concept it only update register RG23D with excise value and qty
Is your plant is Depot or dealer registration
please check your excise group and series group properly
Regards
kailas Ugale

Similar Messages

Other document type for credit memos in MIRO

Dear,
i would like to use a seperate document type for credit memos posted with MIR0 compared to RE for invoices. I created a new Z transaction. And now I thought that I could enter this new transaction code in OMR4 (tablle V_169F), but I can not add a new customised transaction in this list. What can I do?
Or is there an other way to have another document type for credit memos?
Thank you.
Leen

Hi
You can create a new document type for credit memo through t code OBA7. Once the T code is created with all necessary parameters you can assign this to MIRO transaction.
You cannot create a customised transaction through OMR4. This is meant for assigning the Doc type to Invoice verification
Regards
Jaswanth

Posting Key for Credit memo need to change

We are haveing cr 1 and dr 50 posting key for Customer invoice,
for credit memot also same. when we create Credit memo it addsup into revenue which is wrong.
WE need to change posting key for Credit memo(G2 doc type)
please provide Tcode /path for it
Thanks in advance,
-Sam

Hi SAM,
1.Tcode: OB41 for configuring posting key
2. IMG --> Sales and Distribution --> Basic Functions --> Account Assignment -> Revenue Account determination -->
Define and Assign Account Keys.
Reward if useful.
Regards
JACK

Error While doing the Asset Credit Memo -ABGL

HI,
While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 406000000004-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
Thanks
Supriya

Check your config in OABN / OADB
The depriciation area 01 can allow you post values only postive .. in OADB
it has maintained Acquisition values Postive or zero values and net book
values has miantained Postive or 0 values. so based on this setting u cannt
post any negative values for this asset.

DUE DATE FOR CREDIT MEMO

Hello,
I have a question about credit memo -due date.
Using MIR7, MIRO for credit memo the due date for net payment is the same with baseline date.
e.g. document date:18/07/2007
posting date:18/07/2007
baseline date:18/07/2007 terms of payment are 30 days
the system issue due date : 18/07/2007 but correct is 18/08/2007
What can I do to calculate due date correct for credit memo ? (baseline date + terms of payment) ?
Thanks.

Hello
Check the settings in "Terms of Payment"
Check what you have checked in "base line date calculation', I think you need to enter 1 in the box additional months.
Next in the default date setting, check if you ticked "posting date "
Reg
*assign points if useful

Basic Idoc type used for Credit memo processing

Hi ,
I am working to automate the processing of Credit Memos ,Subsequent debits and credits .Can any body suggest me for the Idoc type used for posting of credit memos, which will do the same function of transaction 'MIRO' .Please help me for the above .
Please send the reply on [email protected]
Regards ,
Shilpa

Hi,
You can use invoic message type with invoic01/invoic02 type of IDoc whichever is suitable for your requirement.
Thanks.
Mark points if helpful.

Standard Process for Credit Memo & Debit Memos in CRM

Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AM

Hi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
SD: Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
MM: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
FI: Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> F140_DOCU_EXC_01
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal

Posting a credit memo in reference to a previously posted document

Hi SAP gurus,
I would just like to ask if there is a functionality in SAP re: credit memo postings wherein the system can refer to a previously posted customer document and automatically derive the values such as GL account, cost center and business area of the posted document to the new Credit memo being processed?
Example
Customer invoice:
Dr Cash (GL 100001, Cost center 1000, BA 1000) 1000
Cr Customer A 1000
In the credit memo posting screen, upon inputting the document number of the invoice in the invoice reference, the client requires us that the GL account 100001, cost center 1000 and BA 1000 be derived automatically without manual encoding from the user. Meaning all they have to input is the customer number and the invoice reference (doc number). Is this possible? Thanks

Hi
The invoice ref field in credit memo posting is related only with the payment terms. The systems determines the payment term from the original invoices.
This field should be either filled with the original invoice document number or "V".
If the field is left blank, then the system always takes the payment term for credit memo as "Due immediately"
I dont thing there is a provision for copying the line item details as per original invoice document.

I am having problem while doing vf01 for credit memo

I have done va01 for credit memo.
but when i m doing vf01 for credit memo it is showing account detemination error.
pls help me.

Hi suchinder
Go to t.code VKOA and check wheather for the credit memo billing document type your account determination procedure KOFI00 has been assigned or not. If not assigned assign it and then save the billing document again then it will be forwarded to FI .
Regards
Srinath

Problem while doing invoice for Credit memo request

Hi all
I very well known that Out boud Delivery is not needed for Credit memo request but after saving the CMR and when i raise the Credit Memo (VF01) system is showing a error message saying "PGI not done for Outbound Delivery 30047402"
In CMR document type i have set the order related billing and i have removed the billing block also
I have raised the CMR based on Invoice
Kindly help me in this regard
Regards
BMS

Hi Raj Aryan Malhotra, Thanks for ur reply
The setting which u said are already there
The second one that is, change the copying requirement of header to 11. i did this but this time the message was different "The document is not relevant for billing" . After checking the log i could the follwoing info
Client                                                   240
Group Number
Sales Document Number
Item Number of the SD Document         000000
Schedule Line Number                         0016
Counter in Control Tables                     00
Message Identification                         VF
System Message Number                    016
Output Type                                        I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type                                         F
Kindly help me to resolve this also
Regards
BMS

FB10 - Default payment term for Credit memo

Hi,
I have question regarding the Payment terms in FB10- Credit memo entry (KG).
You must be aware that when we use F-43 or FB60 for posting Vendor Invoices (Document type KR), the payment terms on the screen will be "*", which means it should be picked up from the Master data. Similarly for posting Vendor Credit Memos (Doc type KG) using F-41 or FB65, the payment terms field is blank, which means 'Immediate payment'.
In case of FB10, Fast entry transaction code for both Vendor Invoice and Vendor Credit memo, the Payment terms for KR document is *. But for doc type KG (Credit memo), payment terms field is not blank. Instead, it is shown as *. Why is it? How can we make this blank for KG document postings. Please advise. Kindly revert in case you have any questions.
Regards,
Vinod

HI,
Please check the note 17410 for explanation.
Regards
Ravinagh Boni

Accounting doucment not get created for Credit Memo

Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advance

Hi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit

Asset value for Credit memo

Hi Experts,
I'm new to this forum, Need some help on how the Ordinary depreciation calculated for credit memo.
It is Valuated Goods receipt, asset capitalized before the IR. However, there was a difference in value between GR/IR and the different value automatically got adjusted in APC transaction and also credit memo passed for the difference.
My question here is credit memo value is 2.46 but corresponding depreciation value is 22.14.
Note: It's a Low value asset, useful life is 1 Month. Entire depreciation already posted for GR Value which means more than APC value.
GR value           : 1192.20 -----
APC value         : 1189.74------
Ordinary dep     :   1192.20---
(posted value)
Thanks,

Hi Mukthar,
Thanks for your reply.
However, the credit memo value is only 2.46 USD, depreciation getting reversed each month 2.46 USD and total depreciation reversal value is 22.14 (USD).
Just want to understand the logic behind it.
Thanks,

Return delivery posting before Credit memo posting.

Hi,
I want to post a return delivery before to post the credit memo.
How can I set up the system so that it will be possible ?
Regards

Is it a return delivery to vendor?
Go to SPRO-MM-Inv Mgmt & Physical Inv -Goods receipt-For GR-Based IV, Reversal of GR Despite Invoice and tick against 122 movement type.
You can post the material document and cancel the IR at a later time.
Also read IMG documentation what it says.

How add EMPST for Credit memo with segment E1EDP01_IDOC

Hi experts,
Do you have any ideas for add data in EMPST for segment E1EDP01 (receiving point, in Shipping view) for credit memo ?
I can add this data for standard order but not for credit memo..
My segment E1EDP01 (exemple of WE19) :
If i try to create an credit memo with these data that doesnt add value for EMPST in my order. But if i change the type of document for an standard order that's work and add the value for EMPST ( i change type of document in E1EDK14).
I haven't any ideas for add EMPST for credit memo, did you have ideas ?
Thank's a lot.
Umti

Hi
while creating credit memo
in item level enter the material number and material type or g/l account number if you want to post such costs.
hope it helps

Error in MIRO posting for credit memo in return PO

Similar Messages

Maybe you are looking for