Error in SMW01for BP while replicating data from R/3 to CRM

Hi Experts,
   While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
Can anyone please help me on this.....
Regards,
Rahul

Hi Rahul
As stated above this will happen in case the number is already assigned to a business partner.
Are you
1. <u>Reconnecting</u> the CRM system to a  new R/3 and the CRM system has data from an old system?
2. Has the replication been done before
3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
Rewards points if this was helpful.

Similar Messages

  • Error while Replicating Objects from R/3 to CRM

    Hi,
    While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
    I am working on CRM 5.0
    Regards,
    vimal

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • Error in Source System While Uploading Data from ODS to Data Target

    Hi All,
    Iam getting Following Error while Uploading data from ODS to Data Target
    a) Error in Source System.
    b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
    The time stamp in the source system is 21.06.2005 07:31:33.
    The time stamp in the BW system is 27.11.2004 17:41:45.
    Regards,
    Chakri

    This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
    1. Check for the coonect between the sourse & target systems
    2 . Replicate the data sourcses.
    3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
    Thanks ,
    PSG

  • Error in subroutine READ_NAMTB while transferring data from HCM to xRPM.

    Hi Guys,
    I am facing a problem while transferring data from HCM to xRPM via ALE.
    We are getting the error " Error in subroutine READ_NAMTB" during the Inbound Processing of Idocs in xRPM.
    We have used the standard message type HRMD_ABA and IDoc type HRMD_ABA04 without any modifications.
    Request you all to kindly let me know the solution to fix this issue asap.
    Thanks in advance,
    Punkuj..

    It was a bug in SP2, it is fixed in SP2 Patch 4.
    Cheers !!
    Zaheer

  • Error while replicating data from MSSQL to HANA

    Hello Colleagues,
    I have created SLT configuration where the replication has to happen from MSSQL database for NW BPM for 4 tables. I have also applied a transformation function to convert date columns in the BPM tables to right desired format while replicating in HANA.
    Now when I use the SAP HANA Data Provisioning Editor to replicate the data from these BPM tables, I am getting following error :
    Conv.obj. Z_BC_BPEM_EL_RDS_021: Calculation job in sender system could not be started
    In the configuration I have used Job Options as No of data Transfers Job : 003 , Initial Load Jobs : 002 , No of Calculations Job : 001
    We are using SLT 2.0 and BASIS release 740.
    Please suggest what could be done to remove that.
    Regards,
    Archana

    Archana
    There could be number of reasons for this issue. We need to first start filtering one by one and take out the possibility. Please check the things in the following order.
    1. As everyone mentioned, check if you have free available WPs. System is going to use Background WP for running calculation job in the Source system. Normally Basis define sufficient number of WPs but sometimes they are occupied.  You can check using TCode SM50 ( you need to do that on each host in a multi App server environment ).
    2. Try increasing your calculation jobs in SLT using TCODE LTRC --> Administration Data --> Change no of Jobs. Make sure you have enough free background WP in your SLT and Source system.
    Incase the above methods do not work, provide the following information.
    1. Where exactly you see the error message. Are you able to add the table to Data provisioning from LTRC.
    2. Are you able to add any more tables and do the replication.
    Mahesh Shetty

  • Error while replicating employees from R/3 to CRM. BP no. are not created

    CRM Experts,
    Request your help in solving the following issue.
    While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
    <b>Message:</b>
    IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
    <b>Immediately processing not possible: Screen output without connection to user.</b>
    Steps:
    1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
    2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
    3. The BP number is not getting generated.
    Really appreciate your solutions/suggestions/clues.
    Thanks in advance,
    Vijay

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • Error in Process Chain while extracting data from source system

    Hi All,
    Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
    Please let me know why this error is coming for first why it is not coming after repeating the step?
    Thanks & Regards,
    Murali.

    Hi Murali,
    Hope you are doing good..
    Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
    Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
    If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
    As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
    Regards,
    Anil Pragada.

  • Regarding Address Field while replicating data from ECC to SRM

    Hi Forum,
    I have a few qauestions regarding the mandatory fields that must be maintaned in ECC before replicating data to SRM..
    1)Why is the address data (one we see in PA20 by selecting Addresses for the user) i.e. city and pincode required vefore replication.
    2)Is there a way by which it can be defaulted so that we dont have to maintain it for each and every user?
    Regards,
    Anubhav

    Hello,
    Try if this helps.
    SAP Note : Note 550055 - EBP/CRM: New integration for business partner : Section g:
    Addresses: If addresses are required to generate correct business partners of the organizational unit role (in SRM, for example), the HRALX/OADRE switch is set to X (formerly: the BUPA/ADDR switch). If it is mandatory for each business partner of the organizational unit role to have an address, but the relevant organizational units do not always have a separate address, you can define a standard address. Create a separate business partner for storing the standard address. The number of this business partner, which is used as a container, is stored in the HRALX/OADBP switch (formerly BUPA/ADRBP).
    Thanks
    Ashutosh

  • Replicating data from IS-U to CRM

    Hi,
    I have the following query.
    I have to replicate the data from ISU to CRM for BP, CA, Move-In and CO and Premise. Please tell me how it can be done?
    Thanks,
    Sachin.

    There's a cookbook on replication on the service marketplace. It should provide all the info you need to start setting up replication.

  • Error while replicating customer master data from R/3 to CRM

    Hi gurus,
    I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows  "Incorrect parameter with CALL FUNCTION"
    Kindly help regarding it.
    regards,
    vimal

    Hello Vimal,
    Please refer 552435 and see if this helps.
    Please reward points.
    regards,
    Muralidhar Prasad.c

  • Error while extracting data from Generic datasource

    Hello Gurus,
    I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
    I have done below things:-
    1. Checked the jobs in source system, the job is successfully completed
    2. The generic datasource is active and supporting delta with calender day  in source system.
    3. No TRfc error and no idocs stucked.
    4. No short dumps in source system.
    5. The delta queue(RSA7) is showing 0 with status as green.
    6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
    The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
    Thanks,
    Sonu

    Hello,
    I have used the generic delta using calender day.
    Safety upper limit : - 1
    Safety lowerr limit : - 0
    I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
    Do Generic extraction require any job to transfer data from Database table to delta queue.
    We are not able to get the delta records on BW side. Please suggest.
    Please suggest.
    Thanks,
    Sonu

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

  • Error  While  Deleting Data  From ODS

    Hi all,
    We are getting short dump while deleting data from a perticular ODS.
    Part of short dump is--
    trigger Location of Runtime Error
       Program                                 SAPLRSAC
       Include                                 LRSACU75
       Row                                     535
       Module type                             (FUNCTION)
       Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
    help is desperately required
    Regards
    Srini--

    try to activate InfoSource and later delete data.
    Check if all ODS related objects are consistent and active.
    also pls attached the whole dump for more clarity if this does not work.

  • Error while selecting date from external table

    Hello all,
    I am getting the follwing error while selecting data from external table. Any idea why?
    SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
      2        SE_CUST_ID NUMBER(38),
      3        SE_TRAN_AMT_LCY FLOAT(126),
      4        SE_REVERSAL_MARKER VARCHAR2(255))
      5  ORGANIZATION EXTERNAL (
      6    TYPE ORACLE_LOADER
      7    DEFAULT DIRECTORY ext_tables
      8    ACCESS PARAMETERS (
      9      RECORDS DELIMITED BY NEWLINE
    10      FIELDS TERMINATED BY ','
    11      MISSING FIELD VALUES ARE NULL
    12      (
    13        country_code      CHAR(5),
    14        country_name      CHAR(50),
    15        country_language  CHAR(50)
    16      )
    17    )
    18    LOCATION ('SE2.csv')
    19  )
    20  PARALLEL 5
    21  REJECT LIMIT UNLIMITED;
    Table created.
    SQL> select * from se2_ext;
    SQL> select count(*) from se2_ext;
    select count(*) from se2_ext
    ERROR at line 1:
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04043: table column not found in external source: SE_REF_NO
    ORA-06512: at "SYS.ORACLE_LOADER", line 19

    It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
    HTH -- Mark D Powell --

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

Maybe you are looking for