Error Maintenance Optimizer

Hi, I try download SPS for system SAP GRC Access Control 5.3 but in the step 2 "Select File" in Maitenance Optimizer show message error:
Transaction must be assigned to a Standalone Product Version!
Message no.MOPZ_CHECKS229
In the combo box Select Target not show Stack Details.
help, please
Best Regards,
NW

Hi, I try to assign the SAP ERP 6.0 Product version in SOLMAN LMDB transaction to SAP ERP6 EHP7 system. I am getting error below screenshot.
SAP Details:
ERP 6 EHP 7
Release Version - 740
SP - 02
Thanks
Srinu T.

Similar Messages

Error when Launching the Maintenance optimizer

Hello,
When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
The followin error text was processed in SD1 the systm: Value loss during allocation.
The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
In the trace file of the Work process teh following error was found:
A ABAP Program CL_MO_SMP_ADAPTER=============CP        .
A Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
A Error Code CONVT_DATA_LOSS.
A Module $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
A Function ab_xaCloseSimpleR Line 725.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
I tried to find something about the *RUDILOCKS * without success.
Do you have any suggestion to resolve the issue?

Hi,
Check SAP note 1505832.
Thanks
Sunny

Error in maintenance optimizer generating Stack File XML

Hi all,
In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
*Collecting XML adjustment input data done with error or warning.
Message no.AGS_MOPZ_PLAN_MSG144*
The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
Thanks a lot.

Hello,
Please check if the SPAM level of the Solution Manager is the latest.
If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
Best regards,
Miguel Ariñ

Maintenance Optimizer Error "Value loss during allocation"

Hi Everybody,
like Error when Launching the Maintenance optimizer, i am facing the same problem with SolMan 7.1. Is there anything new?
System is new installed.
SOLMAN_SETUP is executed.
BC Set for MOPZ are activeded.
SMSY is arranged.
MOPZ is aborting after calculation the target with
On Web:
The followin error text was processed in SOL the systm: Value loss during allocation.
The error occurred on the application server _______ and in the work process. 7
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_22 of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: HANDLEDEFAULT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
On ST22:
Category               ABAP Programming Error
Runtime Errors         CONVT_DATA_LOSS
Except.                CX_SY_CONVERSION_DATA_LOSS
ABAP Program           CL_MO_SMP_ADAPTER=============CP
Application Component SV-SMG-MAI
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_DATA_LOSS', was not
     caught in
    procedure "GET_2ND_CHECK_RESULT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Value "01200615325000005298|01200314694900012246:01200314694900010013" was
     allocated in a field which is not long enough.
    Therefore the target field could not store all information of
     "01200615325000005298|01200314694900012246:01200314694900010013".

Hello Espartaco,
I have the same problem, too. Have there been a response to your OSS message?
With best regards
Frank Lehmann

Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

Error when trying use the Maintenance Optimizer Transaction

I have finally gotten through a major headache setting up a SM box, but now when I try to use the maintenance Optimizer, i get the following messages and it won't go any further.
Information Procedure 8000000051 Saved
Warning Status was reset by system
Warning There is already a transaction for the systems of this product version
It stays on the screen to select the logical component and just keeps saving the procedure. I have tried deactivating the old procedures but nothing is working.
Any Ideals.

There was a configuration error, fixed it

AISUSER not assigned - Giving error during Maintenance Optimizer

Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi Pal

Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers

Maintenance Optimizer (RFC-error?)

Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Hi!
I would like to set up the maintenance optimizer activities in my SOLMAN and have the following error/information by entering the Maintenance Optimizer.
<b>How can I fix/solve this ussue?</b>
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
Thank you
regards

Hello Peter,
it seems that your MOPZ isn't initialized correctly. Please see the document in Service marketplace, alias /solman-mopz -> very last link on the bottom ("step-by-step ...".
The entry of the missing RFC-destination is only the first thing which has to be done. You should also activate a BC-Set and maintain your iBase. All of this is decribed in the pdf above.
Regards, Alexander

Maintenance optimizer downloads error

Hi,
While I am doing the downloads for EHPI Upgrade but after choosing target, it gives me this error.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
Message no.BORMMSGDELTACALC164
Please help
Thanks

Hello,
I see that the ACP 'EA-FINSERV617' is released for customers.
I cannot find any issue with the settings for this package.
Perhaps there is an issue in the marketplace. The package might have been moved, or the file has been renamed. In this case, the only way would be to create a new Maintenance Optimizer transaction.
Best regards,
Miguel Ariño

Error in download patches - Maintenance Optimizer - Urgent please

Hi,
I am getting the below error , when i tried to download patches from Maintenance optimizer. Please help me to resolve the issue ASAP.
Regards
Subbu

Hi Subbu,
pls refer below links,
consolut - SOLMAN_SAP_BACKEND008 - Assigned S user and RFC user of destination are incompatible - SOLMAN_SAP_BACKEND 008
Regards
K.N

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

Maintenance Optimizer in Solution Manager 3.2

We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
"Your system administrator must have performed the following Customizing activities:
&#56256;&#56440; Maintain User for Communication with SAP Service and Support
&#56256;&#56440; Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
Your S-User must be assigned to the same customer or corporate number as
the S-User which your administrator entered in the SAP-OSS RFC destination."
We just don't understand the last sentence. You enter an S-User in the SAP-OSS RFC destination in sm59?? Where??
Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
We can access the Maintenance Optimizer, but packages are not visible there. No error is reported. I have the necessary Roles. Are these the correct values?
Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
Any assistance appreciated. Remember, SM 3.2!

Hi,
You can download this to desktop or you can transfer same to server(/usr/sap/trans/EPS/in/)
You have to uncar using SAPCAR.
Also you can directly upload from front-end using spam/saint as well.
Then apply the same using spam/saint.
Let us know if you need any clarification.
Regards

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Error Maintenance Optimizer

Similar Messages

Maybe you are looking for