Error Message and Black screens?

My mbp has been experiencing the black screens of death and so im sending mine in to get repaired. But while not running on the 512 graphics card i've gotten error screens that have multiple languages saying i have to restart my computer and the the screen goes grey. It's only happened twice and I was wondering if anyone else has experienced this problem with there new macbook pro? I remember this happening to my old PB 12inch but when that happened the graphics never seemed to fix itself after being restarted and was told it was my logic board. Could it be that the 256 sautered graphics card is bad in the new mbps as well as the 512 external?

Alright got my computer back and it seems to be running fine, have been using it for about 2 days now. Im not sure if they have replaced anything in the computer though. I checked online when it was in the shop and it had said no problem was found. So I called them and said I knew for fact something was wrong and so 5 days later I got my computer back with some apple repair papers inside. The papers aren't very specific other then in the "Service Description and Parts Used**" it states, "The following services and/or replacement parts were used to service your product."; 605-1688 PCBA MLB CTO 2.8 +"Other Parts Used As Required"+
So maybe they replaced something or maybe im just lucky I haven't gotten any problems yet, only more time will tell I guess unless anyone can figure out what all the previous stuff I mentioned means.

Similar Messages

  • Error message and black scrren when I try to load new game.

    Hi
    Recently I purchased Restaurant Empire 2 for my pc and I downloaded and installed the game but everytime I try to play it, the first screen loads then a black screen comes up with error message " error opening file SHADER/shadowmi/cubemap+shadow.pso." 
    I have sims 3 installed on my computer and runs with no problem so I assumed this game should be able to run too.  Please help.

    It would help us to know the model of your computer and the OS.
    Did you install the patches for the game?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • When displaying PDF in IE9, get blank error message and black display

    Frequently when attempting to load PDF pages in IE9, I get an error message box with no text and an OK button and the display of the document is just black.
    Usually, if I click Reload enough times, eventually it will display.  What is happening here, and why is there no message in the message box?

    I doubt if you facing the issue documented at http://helpx.adobe.com/acrobat/kb/pdf-opens-grey-screen-browser.html
    Though, the blank dialog box can be a result of multiple versions of Acrobat and Reader. What is the version of Acrobat/Reader you have, btw?

  • Roving error message on black screen at start up "Input not supported)

    HP Pavilion media center a1547c,  running XP.  Changed the resolution because the icons appeared larger and the screen went black with a roving error message "Attention: Input not supported" message box is white with grey stripes top and bottom.  On restarting,  WindowsXP logo comes up, then error message appears but I can hear the Windows "chimes".   Anyone?

    Start Windows XP in safe mode.  Press the power button and then begin tapping the F8 key before Windows boots up.  Choose Safe Mode with command prompt. While in safe mode, start system restore by typing rstrui.exe and pressing enter.  Choose a restore point dated before before the initial problem began. This may resolve the issue. If it does, fantastic.  If not, then continue with the troubleshooting as described below.
    When  Windows restarts consider two troubleshooting scenarios to isolate the issue. What you need to know is whether the problem lies with the PC's video output of the LCD display.
    1) connect a different display to the PC  and log into Windows to see if the windows desktop is normal.
    2 )install a low powered (inexpensive and less than 1GB VRAM) PCI Express  x16 video card. You need to see if that corrects the display issue with the original display connected. That will show you if the motherboard's video output is the issue.
    Don't forget to post your result here in your thread.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • An unknown error occurred and black screen

    Lightroom 5:
    1. When I want to export a video, it says: Export Slideshow to video - An unknown error occurred
    2. When I want to play a video the screen is only black.
    I have no problem when I do the same in Elements 12.
    Regards
    Jorgen L.

    Does this help? http://www.apple.com/support/iphone/assistant/phone/

  • I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

    I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

    I figured that was the case, but I've used the same passcode for years and I can't seem to figure out how I managed to screw it up when I set up my phone. Without being able to access my phone for a restore, how would I accomplish this? iTunes? Thank you very much for you help!

  • Panic message restart grey and black screen

    WOONT RE BOOT OR START
    Computer froze and after manual power down and restart, grey and black screen appeared with a message to hold powwer button down to power off and then hold power button again to restart. I did and got same screen and message. "PANIC"  and "Debugger called: <panic>" message in background.

    Hi Fred,
    Is this happening for all Flash content or just your website?  Can you give us a link so we can take a look?  Can you also please post back with your system's configuration report?
    Windows Instructions  
    Mac Instructions
    Please check to see if you are using the NPAPI version of the Flash Player plugin in Chrome.  Let me know if you need instructions on how to do this.  If you are, please try switching back to the PPAPI version to see if that corrects the problem.
    I'm moving this post over to the Flash Player beta forum.
    Thanks,
    Chris

  • My 4s now has error messages and locks to apple screen since iOS 6.1.2

    My 4s now has error messages and locks to apple screen since iOS 6.1.2 update. Can't do anything with it. Its almost frozen, then every now and then it descides to work?

  • TS3694 i was trying to back up my iPhone and got an error message and now i can't even access my phone.  on my screen there is an itunes icon with an arrow and a picture of a cord beneath it.  I can't use my phone or access anything on the phone.

    I was trying to back up my phone and got an error message and cannot use my phone at all... There is a picture of an itunes icon and a cord.  I cannot get to my phone or any settings or icons.... HELP. I'm not sure of my operating system or which iphone 4 it is....

    Open current iTunes on your computer. Connect iPhone to the computer with USB Cable. Follow directions or click the Restore button of iTunes.

  • Itunes wont launch, no error message, no blue screens, just wont open

    itunes wont launch, i get no error message, no blue screen, it just wont open. I've tried to delete and reinstall, but once i close itunes i still have same issue. it wont open again.

    I have same problem  on my XP lap top and Windows 7 PC.    Apple have been investigating this problem for me for a week now without success so far.  Understand it 's ongoing with other customers as well.
      It is caused by an bit of program called APSDaemon supplied by Apple in latest i-Tunes.     Your quick fix to enable you to open i-Tunes again is as follows:-     open Task Manager (right click bottom toolbar), click on Task Manager, select Processes.   Find APSDaemon, highlight and press END PROCESS.      I-tunes will now re-open ok.   You have to repeat this every time you want i-Tunes re-opened until you switchoff or restart.
    A pain I know, but lets you keep going until Apple repair and release an update for i-Tunes

  • Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

    Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

    I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
    I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
    I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
    Can't wait to see what happens tomorrow.

  • Error Message in selection screen Status bar is getting truncated

    Hi Guys,
    Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove this

    Hi
    Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
    What you can do this split 50 and 50 like that you can give 200 chnars.
    Data : Text1 type char50
              Text2 type char50
    If sy-surc ne 0.
    Message Text1 Text2  TYPE "E'' or 'S'
    endif.

  • How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed.

    How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed but it still kept getting stuck on the apple loading screen.

    You have limited opportunity to attempt to create a backup of your created files.
    That is what the SafeBoot or safemode appears to allow you -- at the moment.
    Since the hard disk drive exhibits signs of failure or other major issues, plan
    on a replacement in the near future. You may be able to get the computer to
    start up in a regular full OS X (not safe mode) but consider its hours are limited.
    An externally enclosed hard disk drive (with own power supply, not relying on
    Mac ports to run it) is a good basic means of which to use a disk utility to make
    a copy or a Clone of the current OS X. This may help retrieve an archive that
    could be used along with a Time Machine backup, to restore your Mac once you
    get a new hard drive installed inside.
    Good luck & happy computing!

  • Error message in Selection Screen

    Hi
    reference no (p_ref) is in my selection screen.
    If this field contains special characters (\ / : * ? " |, ) system must prompt  error message in selection screen. How to do this. Pls help me
    Regards
    Anbu

    after input form the user
    use if condtion
    and validate the field and through message.........
    Reward IF........
    Regards
    Anbu
    Edited by: Anbu B on Jun 17, 2008 8:04 AM
    Edited by: Anbu B on Jun 17, 2008 8:06 AM

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

Maybe you are looking for

  • Can't find DLL entry point RegisterGpibGlobalsforThread in ni4882.dll

    I'm attempting to collect data using a gpib-usb interface and display the data in an Excel Spreadsheet using Visual Basic for Applications and NI 488.2 ver 3.1.2 software in Windows 7 64 bit.  The macros in the spreadsheet worked fine using the gpib-

  • Lost media for Final cut Pro X

    I finished a project on final Cut Pro X and started on a new one downloading new footage.  I ran out of Disk space so I started to delete events from my iphoto library. (All is backed up)  I also deleted events and files that where being used in my p

  • Enable multiple PO numberranges to support SRM Classic implementation.

    Hi Experts, We have implemented SRM 7.0 Classic Implimentation. We currently have one PO number range which is assigned to one PO document type to support North America and Canada region. We are planning to go for roll-out for Latin America, Europe a

  • Zsnes 1.42 fails to detect opengl libs

    Hi there, I'm new to archlinux (although not new to linux in general) and really like it so far. However I'm having some problems with compiling zsnes 1.42. For some reason zsnes fails to detect opengl. I'm running libgl 7.0.3rc1-1 and mesa 7.0.3rc1-

  • I am  SD/LE Transportation Consultant

    Hi guys , New to this SAP community network, I am looking for Shipping and Transportation related topics , This is just my introduction to you guys , Feeling good to join you guys, Thanks Dhaval