Error when playing my movie on a HTML file

I have a very strange problem.
When I test my movie inside Director, it works perfectly, but
when I export it and test in a browser, then if gives an error.
In particular, this is line which gives error only in the
browser:
if (netDone(grupos[cs]) = TRUE) and (netError(grupos[cs]) =
"OK") then
However, with this line it does work:
if (netDone(grupos) = TRUE) and (netError(grupos) = "OK")
then
when gruops[cs] is a list, it fails, otherwise it works. How
can it be? What is the problem?
Thank you.

"cubelan2" <[email protected]> wrote in
message
news:fj56cm$ohf$[email protected]..
>I have a very strange problem.
> When I test my movie inside Director, it works
perfectly, but when I
> export it
> and test in a browser, then if gives an error.
>
> In particular, this is line which gives error only in
the browser:
>
if (netDone(grupos[cs]) = TRUE) and (netError(grupos[cs]) =
"OK")
> then
>
> However, with this line it does work:
>
if (netDone(grupos) = TRUE) and (netError(grupos) = "OK") then
>
>
> when gruops[cs] is a list, it fails, otherwise it works.
How can it be?
> What
> is the problem?
>
> Thank you.
What exactly is the error message?
Are you sure cs is defined, and exists in the list?
Is the value of cs what you think it is?
Richard.

Similar Messages

HT1657 Error when playing rented movie. Now expired.

After renting and playing a movie for only seconds, I get the following mesage "An unknown error occurred. please try again later". Now my rental has expired. Can I get credit for it?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Why does Dreamweaver upload a blank page when i "put" a .php or .html file that I just edited. It's

Why does Dreamweaver upload a blank page when i "put" a .php or .html file that I just edited. It's like Dreamweaver isn't putting the complete file. So when i check my work (refresh the page), it is now blank. This happens about 50 percent of the time and can occur with any of the websites I maintain. (If I pull out my macbookpro, i can edit and upload the page, but the screen is smaller and i would rather be at my desktop). I am using CS5 on a MacPro, operating system 10.7.5.

I've never heard of that type of error before. If it were happening to me, here are a few things I would do...
Verify it's DW
     Download Filezilla (free and very nice in reality) and make sure it uploads correctly from there to rule out connection issues
Rebuild Site Cache
     From the Files window of your site, click the menu and go to Site > Recreate Site Cache
Delete DW File Cache
     If the above does nothing, I'd kill my DW Cache File: http://forums.adobe.com/thread/494811
Uninstall, clean, reinstall
     Uninstall the program, use the cleaner tool here: http://www.adobe.com/support/contact/cscleanertool.html to kill everything (Adobe leaves behind things that are picked up again in a normal uninstall/reinstall) then reinstall it.

I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help?

I am trying to make a signature in MS Word (2007) which includes a jpg image, but when I save it as a HTML file and attach it the text appers OK but the image doesn't. I have tried various formats but still no luck. Can anyone help? edit

C'mon! Anyone???? I'm desperate!

TS3694 i have error when i install restore and update in file unknown occurred error 1015

i have error when i install restore and update in file unknown occurred error 1015

http://http://support.apple.com/kb/TS3694#error1015 this should help you with your problem.

Error message -42110 when playing rental movie

I've just downloaded Tintin from the rental section on iTunes. When I try and play it I get the error message -42110. When I access my account on iTunes it says that I still have 1 purchase to download. I went through the download process for a 2nd time and again when I try and play the movie I get an -42110 error message. I have the latest version of iTunes and I'm running Mac OS 10.7.3. Can anyone help? I've e-mailed Apple and I'm waiting to hear back.

See the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

"General Error" when importing QT movie to FCP

I am trying to import a QT movie to FCP to do a slideshow. The slideshow was done originallly on iPhoto and then exported to a QT movie. I then imported the file (the QT movie) to FCP. When I tried to play the movie in the Viewer, I got a "General Error" message. I shut everything down and tried again to no avail. I could move the playhead throughout the Viewer and see the photo at that spot but whenever I tried to play the clip the error message came on. I can export the slideshow to iDVD however, I then have no conrol over the music (I need to shorten a track and try to shorten the gaps between songs). I can't do that in either iPhoto or iDVD. That is the main reason I want to use FCP. I was able to do this a week ago for a different project although I was using a different computer then. My current problem is when I am using my G4, Dual 1 GHz, 2MB L3 cache per processor, 1 GB SDRAM. I'm using FCP 5.1.2.
Any suggestions? This is for a Christmas project!

Jon,
I don't know if I am reading the problem right but ...when you export your video from iPhoto to FCP I am pretty sure you have to change how it opens. When I do this I save my slide show from iPhoto to the desk top then highlite it and "getinfo" to change it to a "open with QT movie" Then when you import it to FCP you can do what you like with compositing re music, titles etc.
Be aware tho that anything you do with that QT while in FCP will take alot of rendering because it is a complete sequence.
Me personally...after you finish ... export it to the desk top again and drag it into iMovie for a clean compression in Mpg 4. The slide show should be cyrstal clear. The pros may have better stuff to add but as an amature this works for me.
I hope this makes sense!
Rob

Itunes freezes when playing a movie

Since the last update, whenever I play a movie rental, The picture will freeze but the sound continues. I have to completly restart itunes to fix it. Any suggestions on how to fix it so it doesnt happen again?
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard h8-1360t
iTunes 11.1.4.62
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 3.0
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.0.32
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CBA480C249210
Current user is an administrator.
The current local date and time is 2014-02-20 20:34:03.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD Radeon HD 7570
NVIDIA, NVIDIA GeForce GTX 660 Ti
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.4.62 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {AB}
Description:    Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
IP Address:
Subnet Mask:
Default Gateway:
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:
Lease Expires:
DNS Servers:
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-02-20 20:33:32.

I think I solved the problem.....In Itunes, I had my iphone set up to update VIA wireless...Itunes scans and constantly searches..which was causing the video to freeze up...when I disabled or disconnected the iphone, I no longer have issues.
If anyone else is....Disable any devices (ipads, Iphones, ipods) that might be connected to itunes using the wireless method.

Error when I preview my form in HTML using Adobe Livecycle Es4

Need help!!!! This is the error while I preview my form using HTML. Even though the from structure is present I am not able to preview my form.
Please reply since it is a project deliverable and its an urgent requirement.
Thanks in advance.

I am not able to send the error.log file since its very huge. I have attached the screen shot of the error I am getting when i try to preview the HTMl.
Can u please give your mail id so that I can send the error.log file.
Since it is very urgent, require help.

Grey screen in iTunes when playing downloaded movie

Since the update from 10.7.5 Server ed. to 10.9 Mavericks on my Mini-mac I have problems with the playback of downloaded iTunes movies. The only thing I see is a grey screen. This not only is the case for playback with iTunes, but also for playback of DVD's.
When I want to play the movie on my AppleTV (from the iTunes library on the same mini-mac) it's no problem. On my iMac: same. No problem.
So it must be something on the mini that handles the playback of copy-protected material. I think I need to remove something and get it installed anew, probably something Quicktime related.
Is there anyone that can help me out?
Berry

Oh, Apple, sometimes you drive me mad.
I filed a bug report. Seriously????
17852793 iTunes move plays only audio, no video, gray screen
Apple Developer Relations13-Aug-2014 10:23 AM
Engineering has determined that this issue behaves as intended.

Javascript error when adding Flash movie to DWCS3

When I try to add a Flash movie to a page in DW CS3, I get
the following message:
When executing onClick Options.htm, the following Javascritp
Error(s) occurred:
At line 55 of the file "I:\Program FIles\Adobe\Adobe
Dreamweaver CS3\Configuration|Commands|Object|Object Options.js":
Cannot fine the file I:\Program FIles\Adobe\Adobe|adobe
Dreamweaver CS3\Configuration\Shared\Common\Cache\Empty.htm.
At line 55 of the file "I:\Program FIles\Adobe\Adobe
Dreamweaver CS3\Configuration\Commands\Object Options.js":
getDocumentDOM: Argument number 1 is invalid.
If I click through the error messages, I finally get the
movie on the page and it seems to display okay in IE6 ahd FX.
I don't get the error when I load a Flash movie if I use DW
8.
Do I need to reload DWCS3? Or is there a fix that I can
download. It seems to be a problem with DWCS3.
Regards,
Bill Schaepe

Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TurboBill" <[email protected]> wrote in
message
news:flrsjd$6kh$[email protected]..
> When I try to add a Flash movie to a page in DW CS3, I
get the following
> message:
>
> When executing onClick Options.htm, the following
Javascritp Error(s)
> occurred:
>
> At line 55 of the file "I:\Program FIles\Adobe\Adobe
Dreamweaver
> CS3\Configuration|Commands|Object|Object Options.js":
> Cannot fine the file I:\Program FIles\Adobe\Adobe|adobe
Dreamweaver
> CS3\Configuration\Shared\Common\Cache\Empty.htm.
>
> At line 55 of the file "I:\Program FIles\Adobe\Adobe
Dreamweaver
> CS3\Configuration\Commands\Object Options.js":
getDocumentDOM: Argument
> number
> 1 is invalid.
>
> If I click through the error messages, I finally get the
movie on the page
> and
> it seems to display okay in IE6 ahd FX.
>
> I don't get the error when I load a Flash movie if I use
DW 8.
>
> Do I need to reload DWCS3? Or is there a fix that I can
download. It
> seems
> to be a problem with DWCS3.
>
>
> Regards,
> Bill Schaepe
>
>

Script Error when I Publish Movie

I am getting a script error when i Publish a Movie.But when
run the movie i dont get any error.
I get the error message window as follows
Symbol expected
<Void>
Script Error. Continue?
and the options "YES" and "NO"
What could be the possible reason for this.
I have draged a combo behaviour onto a bitmap.I think there
is something wrong in that behaviour as it conatins many functions.
Please highlight on this issue as it is really very urgent
for me.
Thanks

Hi Ajeet,
You've left out an xtra. It's impossible to tell which one
from your
description. I'll guess that its a scripting xtra, possibly a
third
party xtra.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

My mac showing plug in error when seeing a movie

I download lion ox and now when to watching movie in netfix: it show plug in error

Hi Alberto, does the sound ever work right, like say playing iTunes?
Have you checked for a Ground Loop in your power or attached devices?
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Re: the 'noise' effect. I get a 'unknown error' when encoding my movie.

When I am using the add, 'noise' effect I get a 'unknown error' when I try to encode my movie. Help.
rik

Yes, I have an idea: do not use a string for $parameters; use a double-quoted here-string:
$parameters=@"
<?xml version="1.0" encoding="utf-8"?>
etc...
( and don't forget to delete the grave accents - back ticks )

Getting Access Error when playing Spotify Connect on Yamaha AV receiver

I having problems when playing Spotify Connect on my Yamaha AV receiver (RX-A1030).
It starts playing (from iPad and iPhone) as supposed. But after about 30-60 seconds it stops playing and the message "Access Error" shows in the receivers display. Then I must pause and start play again. Then it will play for about 5 seconds. I have had this problem since the first day the new firmware was released.
I have tried every solution with no luck. I have been in contact with the Yamaha store and they advised me to get in contact with the Spotify helpdesk.
I can however play music from Spotify by using Airplay without any problem. But the real reason I bought this receiver was to achieve the Connect function.
Appreciate all help to solve this problem.
Thanks.

The exact same thing happend to me yesterday.
I have a new RX-V475 which worked fine from 2014-07-04 until 2014-07-06.
When i came back to my flat on 2014-07-13 it wasn't working anymore.
The reciever is coming on and off in the spotify device list. It's not playing anything from spotify though webradio is working fine.
Therefore the network connection should be fine.
The reciever is shortly showing the message "access error"
A reboot of the router and a firmware update of the reciever did not help at all.
I also disconnected the recievers power supply, to force a reboot of it.
I have the newest spotify version installed on an android tablet. (I remember, there was an update to spotify sometime between 2014-07-05 and 2014-07-13) and an older version on my smartphone. Both are not working.
Was there any change on the spotify side server-wise?
The next step for me is to reset the reciever to factory settings.
Do you think, this might help?
Any suggestions?
EDIT:
The reset to factory settings did not help.
EDIT2:
NEither did deleting all data and reinstalling the app.

Error when playing my movie on a HTML file

Similar Messages

Maybe you are looking for