ESW540-8P not taking updates through Web GUI

It can take changes through CCA but only minor things can be changed there. Any ideas?

Hi,
Thank you for participating in the Cisco Small Business Community. My name is Nico Muselle from Cisco Sofia STAC and I'll be glad to assist you with this problem.
What exactly is it you are experiencing when configuring the ESW through the web interface ? Please make sure that when you apply any changes through the GUI that you save the configuration afterwards. This is a common thing that is often forgotten. It's also a good idea to use either CCA or the web interface at any one time to configure the switch but not use them at the same time.
Please let me know what exactly the issue is so we can solve this problem for you.
Best regards,
Nico Muselle
Sr. Network Engineer - CCNA

Similar Messages

The specified user could not be found through web ensure user

Hi,
If user doesn't exists in the active directory,blank value/message needs to be displayed.
For this i am writing the code as below,but if user is not found i am planning to display the else part.
But problem here is,it is bombing up if user is not found and displaying the exception.
Please let me know to handle the same.
using (SPSite site = new SPSite("http://servername:port/sites/site1"))
using (SPWeb web = site.OpenWeb())
SPUser user = web.EnsureUser("userid");
if (user != null)
Console.WriteLine(user.Name.ToString());
else
Console.WriteLine("User Not Found");
Thanks & Regards, Sudheer

wrap in try/catch block.
if you notice, the documentation for EnsureUser (https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spweb.ensureuser.aspx) is very clear:
Parameters
logonName
Type: System.String
The logon name (Domain\User_Alias) of the user.
Return value
Type: Microsoft.SharePoint.SPUser
A user with the specified logon name.
Exceptions
Exception
Condition
SPException
The user with the specified logonName cannot be found in Active Directory.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

IPod not taking update after iTunes update.

I just finished upgrading to iTunes 7 and it said my iPod needed an update (software version 1.2). It's in the process of updating but then it stopped and gave me an "unknown error 1417." I tried updating again and it gave me the same error. What does it mean?
Thanks.

some folks have been having some success getting past the 1417 using eboncairn's technique:
eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

Attchment not visible in ITS Web GUI

Hello Experts,
We are facing a strange issue after reverse proxy migration, as of now external users are attaching file in a custom transaction iview from external facing portal , flow is from reverse proxy to ITS server to backend FILO box.
we found that attchment refrence is getting stored in backend but some how after attaching it is not appearing in attchment list in transaction iview.
We did some JVM tracing and found nothing useful.Also
if any of you encounter such kind of issues then please share your experiences any help or suggestions are very helpful.
Regards,
Siddharth

From re-reading the first post - this sounds like a application issue rather than ITS. I thought the issue was that via the Proxy the document was not getting uploaded. Does it make a difference if the Reverse Proxy Server is not used and you connect directly to the ITS 6.20?

CS6 thumbnails not taking updates after RAW edit, cleared cache

Cleared cache and changes are appearing in the Camera Raw edit screen, save the changes, clear the thumbnail cache and the changes are not reflected in the thumbnail. This use to work fine in CS4, any suggestions?

If you have Bridge thumbnails set to embedded raw edits will not show. Need to have one of the HQ varieties for this to happen. Can change in toolbar second row right side.

After upgrading to OSX Mavericks, my Contacts app on my desktop not syncing with iCloud and changes I make on my iDevices are not being updated through system.

In the desktop Contacts apps, there is an error icon always present (since the upgrade) in the upper left hand quadrant of the app window. When I click on it I get an error msg. See Screen grab below.

"On my phone" by definition doesn't sync. You need to move it to an iCloud group. Unfortunately, the Contacts app on the iPhone doesn't have this capability. There are 3rd party apps that let you move contacts from one group to another. Speed Names is a good choice, and inexpensive.

TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Hi
After upgrading to EHP7 the function module TH_DELETE_MODE is not working in the Web GUI. If I start the TH_DELETE_MODE in SE37 with the default paramter "1-" I'll get the HTTP error code 500. We use the function module for our webdynpro to logout but it is not working anymore.
Any idea or recommendation?
Thank you and best regards, Ronny

Your server-side include has all of the HTML on it for a full
page.
Strip everything from it except the stuff you want to
include.
http://www.fordwebs.com/mx-asp/ssi-index.asp
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"ValsGalore" <[email protected]> wrote in
message news:f019c0$in1$[email protected]..
>I just recently began work on an existing Web site, which
includes the file
> nav.asp on every page. After I made some changes to one
of the pages (it's
> temporarily located at
http://www.enviroglasproducts.com/reps5.asp),
I found
> that when I closed it and reopened it in Dreamweaver, I
could no longer see the
> page in preview mode.
>
> It shows my </head> tag highlighted in yellow, but
won't let me click on it.
> In code view, the <table> tag, which is the first
tag after <body>, is "marked
> as invalid because it's an overlapping or unclosed tag."
I've been over this
> document several times, but I cannot find any errors in
the construction of the
> table.
>
> If I copy all the content into an identical page, it
will look fine in
> Dreamweaver until I close it and reopen it, and then I
will have the same
> problem.
>
> Oddly, when I remove the  from the second cell
> of the main table, then everything looks fine.
>
> Other points worth mentioning are that (until I delete
it), nav.asp shows up
> in its proper location in reps5.asp, but nothing else
does except for the image
> that appears right above it.
>
> In other pages on the site, the included nav.asp does
not show up in
> Dreamweaver at all.
>
> Can anyone think of why this is happening?
>
> Thanks!
>

My mac contacts are not updating through icloud?

I am puting new conacts on my phone and ipad but they are not being updated through to my mac any ideas?

Please try the following…
    1.    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    2.    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    3.    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Fcode for Minimize/Maximize is 'ENTER' when we go thru WEB Gui

Hi,
We are Upgrading our System from 4.6c to ECC 6.0. We are facing a strange error actually. When we go through the application in SAP GUI Mode , the screen Minimize / Maximize is working fine. But when we go through Web Gui, This scrren Minimize/Maximize is picking the Function code 'ENTER' as a result of which on every min/max , it is navigating to the next tab section (same functionality for Enter Button). Ideally it should not navigate to the next tab section, instead should remain in the same tab.
Please suggest how to resolve this issue.
Thanks

The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect.
I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

E90 could not be updated. Phone has the latest sof...

My nokia e90 ra-6 7.40.1.2 ( 0533332 ) could not be updated through nsu, because nsu says that my phone has the latest software, while it hasnt! Whats wrong with my phone?

Well, back again... a new iTunes and QuickTime update via Software Update and it got my iTunes in the same state again after the web installation. DOH! I reinstalled both QT and iTunes again to fix the issue again. I can't be the only one that this is happening to so just reiterate the fix works but that I'm beginning not to trust the Software Update versions of the installers for QT and iTunes. There IS a difference and it's a buggy result of not being able to find the iPod afterward. Next time I get the prompt to update I'm going to refuse and then download it from the website.

SRM 4.0-- Blank Page displayed without Errors through Web Browser

Hi All,
Can any one help me in the following ....
We are trying to give access through the Web Browser instead of Sap GUI.
we have started all the services through SICF.
when we tried test service through WEB GUI it is showing a blank page.
It is not giving any errors on the page.
there is no problem in the URL..
Can any one help me by giving option of errors and where to check.....
Bye
Suresh

Hi
Read this ->
The entries in table TWPURLSVR should be as follows:
e.g.
LOGSYS : MRDCLNT100
WEB SERVER : SAPDEV14.XEROX.COM:8001
WEB PROTCL:HTTP
WIN SERVER:SAPDEV14.XEROX.COM:8001
WIN PROTCL:HTTP
BSP SERVER:SAPDEV14.XEROX.COM:8001
BSP PROTCL:HTTP
Also, refer to OSS Note 790727 describes the details for publishing all the services
Refer
why can I not find Service BBPGLOBAL in TA SICF?
for details.
Regards
- Atul

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Customize Local Layout in SAP R/3 Web GUI?

We are using IC WebClient with a link to R/3 4.6c for order entry. The users want to be able to have the same control in the R/3 Web GUI that they do in the native R/3 GUI (eg. automatic tabbing at end of field). In native R/3, this is controlled via the 'Customize Local Layout' icon on the toolbar, but this icon does not exist in the Web GUI. Does anyone know if this kind of control is available with the R/3 Web GUI?
Thanks for your consideration.
Kathleen McCullough

Per OSS - "Differently from SAPGUI, Web UI is built in a navigator envinronment (Internet Explorer, Mozilla, Safari...). Thus the requested functionality depends on the browser, not on any SAP setting.
To my knowledge, this feature is not available in Internet Explorer, butyou can always write a simple Java routine that does the job. I found an article that you can use to start your investigation. Please, check it here:
http://articles.techrepublic.com.com/5100-10878_11-6069857.html "

F4 - multiple sessions - Web GUI

Hi,
We have ECC 5.0
Kernel - 64-bit patchlevel 129
SAP_BASIS 640 is at version 15
When I access a transaction through Web GUI for example 'me51n' (or any transaction), with below URL
http://localhost:8000/sap/bc/gui/sap/its/webgui?~transaction=me51n
if I hit F4 in material field (any field where F4 is possible), it opens search criteria screen and when I hit 'Start Search' button, it opens another 'me51n' screen behind the search result. For every hit of 'Start Search' button, a new session that of the transaction is opend.
How can this be fixed?
Thanks,
Vishnu

Hi Vishnu,
Could you check if republishing the internet services system and webgui to site INTERNAL solves the problem.
Thanks and regards,
Dieter

IPhoto library not updated when viewing through web browser, why?

I post a lot of pics to my blog on Tumblr. When I do I go to Tumblr, choose "Photo" and it brings up the screen with the options. I click the universal "browse" button and it brings up the finder. I click on the "Photos" icon under the "Media" section and it brings up my iPhoto library. The problem is it will be missing the newest photos I've imported. I could have imported photos days earlier or just a few minutes ago they just aren't there to choose.
Of course on some days they are available and I can't figure out where the disconnect is. Anyone have a clue? This is not tied to any particular browser either, I've tried them all. I feel like the meta data file iPhoto keeps (is it an xml file or something?) is not being updated? I have no idea. Any help is appreciated. TIA!

Have you tried clearing your browser's cache? I find that sometimes (particularly with Safari) it is inclined to retrieve old pages from its cache rather than from the web.

ESW540-8P not taking updates through Web GUI

Similar Messages

Maybe you are looking for