Ethernet connection between remote computer and remote ax

My wireless system is Time capsule connected to the cable modem. Airport Express connects through the wireless network created by TC. My G5 is connected to the AX by ethernet. Initially the G5 was able to connect to the internet by the ethernet connection. I attempted to connect my MacBook but I was unsuccessful. Any help would be appreciated.
Thanks,
Gordon

Solved the problem. The wireless network has to be setup as a WDS network in order to connect a remote device by ethernet to a remote TC, AExp, or AExt.

Similar Messages

  • Can't establish wireless connection between the printer and computer.

    I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window  in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit  altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

    Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you. 
    I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
    When you say; 'I reset the printer to factory settings', how where you trying to do this? 
    I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
    To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
    "I've checked to make sure both computer and printer are on the same network."  Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads 
    To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
    ... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
    ... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
    ... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues.  HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer.  I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer  Please let me know if any of these steps resolved your issue, or the details of what happened.  I look forward to hearing from you, hopefully with good news!   Thanks, 

  • Connection between MacBook Air and iphone 3gs through a hub isn't good

    Several times the connection between my computer and iphone has stopped or cancelled saying that the iphone had been disconnected. But nothing had been touched! Why?

    Hey,
    Plug the iPhone directly into the MBA. If your going to use a hub make sure it's a powered hub, the hub itself should have it's own power cord. If it's powered by the USB port then your going to have issues.
    Hope it helps
    Post the results :-D

  • Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

    Hello.....
    I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
    This issue is with only three servers in the environment
    "Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
    The date/time is correct on the server when i checked in the console session of the server
    Can see below messages in event logs
    Event ID 1014:
    "Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
    Event ID 1053:
    The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
    a) Name Resolution failure on the current domain controller.
    b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
    Any thoughts ....

    Hi,
    Have you tried to connect these three servers with IP address instead of computer name or DNS name?
    Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
    For more information please refer to following MS articles:
    Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
    http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
    Cannot connect via Remote Desktop
    http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
    Lawrence
    TechNet Community Support

  • I used an ethernet cable between my iMac and Time Capsule for the initial backup.  Now that initial backup is concluded, can I simply unplug the Time Capsule from my computer?

    I used an ethernet cable between my iMac and Time Capsule for the initial backup.  Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly.  Is this assumption correct? 

    can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly.  Is this assumption correct?
    Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
    I did not disable wireless.  So I assume the backups are occurring both with the ethernet and wirelessly.
    It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
    I also show 2 wireless networks available through Airport.  Shouldn't there only be one now?
    You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
    I named my new network the same name as the old network.  This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow.  Any input on this issue as well?
    Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule.

  • HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

    ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

    Hi,
    Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
    the Problem report.
    When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
    "native" windows drivers. Now, every major PC company has there own version
    Thus the problem report.
    There is  rather involved and lengthy procedure to check and install the correct Bluetooth drivers
    in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
    Here is what I propose;
    The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
    try apologizing to it and that you'll never never do it again, what ever it takes!
    Make the best investment you can make for your Blackberry, buy a media card.
    All the memory in the BB is dynamic, this facilitates the functions of the phone.
    By storing media in that memory, you effect are wasting X amount for file storage.
    Store all media and files on the media card, and you will have a smooth running device.
    They run about $25.00usd, they are easy to install, and they also make moving your
    media a snap. You will need the USB adapter that came with it, but you can get that at
    your local carrier store.
    So if you agree with this I need some info.
    On the Blackberry go to the options icon,click then scroll up to ABOUT.
    I need your software version number, it's listed in this format: 4.x.x.xxx.
    Send it back to me and I can tell you what size card you can get.
    Let me know your thoughts!
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • How to test the connection between DSD backend and DSD connector

    Dear all,
    I am configuring the MDSD scenario .. and i want to insure that my customization is correct
    How to test the connection between DSD Backend and DSD connector ??

    Hi Viren,
    The problem is:
    We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
    Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
    Thanks,
    RPK.

  • I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

    I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

    ErolSinan wrote:
    ... there is no button for update between the About and Usage buttons in the General. ...
    Correct. That is only a feature of iOS 5 or later...
    ErolSinan wrote:
    ... yes my phone is 3G.
    then it can only go as far as iOS 4.2.1

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • How to set up internet connection between MacBook Pro and an old eMac?

    I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
    I'd like to use it with screenrecycler and it needs a network connection.
    How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
    Thank you very much

    Hello,
    First, are you using Wifi for Internet on the MBP?
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
    In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
    Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

  • Multiple ethernet connections in one computer?

    I have two ethernet connections in my computer (2 IP Addr) I would like one connection to talk to a PLC(UPD) While the other (wireless) to talk to a printer across the room (TCP Visa Resource- open and write) Is this possible in LV7.1

    jaggedmedia wrote:
    > I have two ethernet connections in my computer (2 IP Addr) I would
    > like one connection to talk to a PLC(UPD) While the other (wireless)
    > to talk to a printer across the room (TCP Visa Resource- open and
    > write) Is this possible in LV7.1
    There should be no problem. Assuming your network is setup properly and
    each network card has its own subnet, the TCP/IP socket driver should
    route any package through the correct network interface.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • OS X 10.10.2 Your connection failed because the communication device is unavailable. Make sure it's connected to your computerunication device is unavailable. Make sure it's connected to your computer and try reconnecting ad try reconnecting

    There is precious little information concerning this warning dialog. If I am disconnected from any network; wifi, Bluetooth, Thunderbolt Ethernet, doesn't matter, I get this error in a pop-up dialog. "Your connection failed because the communication device is unavailable. Make sure it's connected to your computer and try reconnecting" Creating a new Location under System Preferences / Network does not solve the problem. 1. What is asking to be connected? 2. How do I stop this? Running Yosemite 10.10.2 on a MBP 13"

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Problem: Hotsync error message "The connection between your device and the desktop could not be establisthed."

    When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed.  Please check your setup and try again."
    Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
    Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time.  HotSync Manager will open the port when it becomes available."
    Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4.  I cannot change it to anything else.
    Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
    Tried rebooting both laptop and Palm TX.  Still can't Hotsync.
    Operating system: Windows XP Pro
    Post relates to: Palm TX

    You are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
    Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
    I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's.

  • Can't make a connection between my tv and laptop

    I can make a connection between my laptop and tv as far as being able to view the picture I have as my wallpaper on the tv, but that is all.  If I change the wallpaper picture on my laptop it will change on the tv also, but again that is all I can do. That is far as I can get.  Just a picture, no icons, no nothing.  I have connected using a 15 pin cable on both ends.  I have windows xp.  There must be a setting in control panel, display or somewhere but I cannot find it.
    HELP

    Thanks, but that didn't work.  Nothing happened.  This time however I completely turned off the tv and computer.  When I booted up the tv screen showed my password sign in screen.  I entered my pass word,  The screen momentarily showed my complete desktop, both  wallpaper and icons but after about a second or two it blinked and then showed only my wallpaper as before.  Puzzling.  There has to be an answer somewhere.
    Thanks for your help.

Maybe you are looking for